history of firmware for HP DV9000 model dv9317cl

Similar Questions

• Windows 7 Upgrade Guide for dv6000/dv9000 models

  Statement:

  You use this guide at your own risk. I take no responsibility for any problem.

  Things you need to know and do before the upgrade:

  1 HP may require that reinstall you Vista back if you have hardware problems to solve the.

  2 HP will not help you if you have software problems because these models are not officially supported

  with Windows 7.

  3. before you upgrade to Windows 7 will make it please Vista Recovery CD/DVD. How all the information here.

  4. all drivers Vista and software preinstalled by HP for your model are in the folder in C:\swsetup .

  If you still have on your HARD drive, then copy this folder on a CD/DVD. You may need them one day.

  5 users with nVidia graphics card should check the temperature of this device before upgrading.

  In this way you will know is it works fine under Windows 7 also.

  How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?

  To do this use HWMonitor (free and recommended) or Aida64.

  How do you know what model you have and the specifications for it:

  1. click on the Support & drivers link. (The upper part of this page).

  2. in the search box, type your computer laptop product (p/n) number.

  Resources:

  How to locate the laptop n/p

  3. under a portable computer image, you will find the name of your laptop model (example: HP Pavilion dv6205eu notebook PC).

  4. on the same page, click on Product Information -> specifications and you will find all the information on

  your little laptop.

  How to install Windows 7 and what you need to know during the upgrade:

  1 guide: How to do a clean Windows 7 install

  2. all drivers for Windows 7, you will find in the next post below.

  3. some drivers have comment while they are initially made for Vista system.

  During normal installation will fail, and then try to run the file unsuccessfully installed in Compatibility Mode (Windows Vista,

  Windows Vista Service Pack 1 and Windows Vista Service Pack 2).

  Resources:

  Make older programs in this version of Windows

  How to run a program in Compatibility Mode in Windows 7

  CHIPSET DRIVERS

  Solution on COPROCESSOR with yellow exclamation mark () 

  If you have Intel processor:

  Intel chipset (Install and reboot before other drivers) here (version 9.1.1.1025 for 32/64-bit Win7)

  Intel Rapid Storage Technology here (ver 10.1.2.1004 for 32/64-bit Win7) 

  If you have an AMD processor:

  For models dv60xx, dv61xx, dv62xx, dv63xx, dv64xx, dv90xx, dv91xx, dv92xx, dv93xx and dv94xx (example: dv6367am means that your model is dvx3xx, dv9421xw means that your model is dv94xx):

  nVidia Chipset (Install and reboot before other drivers) here (Vista)

  For models dv65xx, dv66xx, dv67xx, dv68xx, dv69xx, dv95xx, dv96xx, dv97xx, dv98xx and dv99xx (example: dv6981tu means that your model is dv69xx, dv9721tu means that your model is dv97xx):

  nVidia Chipset (Install and reboot before other drivers) here   (Vista) 

  Important information for users with nVidia chipset!

  If you have 4 GB RAM or more, then read the article Microsoft Knowledge base on the solution of certain problems that you may have here.

  GRAPHICS DRIVERS

  Intel graphics:

  Inte l 950 and Intel X 3100 here (version 15.12.75.4.1930 for Win7 32 bit) or here (version 15.12.75.4.1930 for Win7 64 bit)

  nVidia Chart: 

  Important information!

  If you have installed all the drivers for graphics card nVidia, then until you install the other version will be

  you will first need to remove the old drivers. Check below how guide (that there is no standard uninstaller

  ( process):

  How to remove drivers Windows system nVidia graphics.

  Drivers:

  nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS:

  OPTION 1
  

  267.76 version here for Windows 7 32 bit or here for Windows 7 64-bit.

  OPTION 2

  Version 197.16 here for Windows 7 32 bit or here for Windows 7 64-bit.

  Note:

  Don't forget to first uninstall previous graphics driver.

  nVidia GeForce GO 6150 M, 7150 M, 7200 M, 7400 M or M 7600:

  OPTION 1

  First try installing the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  OPTION 2
  

  If the drivers will not work so try modded drivers worm 195.81.

  Note:

  Don't forget to first uninstall previous graphics driver.

  How to install Windows 7?

  1. download driver here (for 32-bit Win7) or here (for Win7 64 bit) double click and select extract,

  2 download from this site with the drivers also modified INF and replace original INF in extracted folder,.

  3 install and reboot.

  OPTION 3

  Last thing you can do is install graphic driver from Windows Update.

  Note:

  Don't forget to first uninstall previous graphics driver.

  1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '

  Windows Update '.

  2in the left pane, click " check for updates " and then wait while Windows searches the latest updates

  for your computer.

  3select the " optional updates " and install from there only driver for your graphics card.

  AUDIO DRIVERS

  Conexant HD Audio

  Use the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  Realtek HD Audio

  Use the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  If the Vista drivers won't work well for you then try to use Realtek official a of here (32/64 bit Win7).

  "" When you enter this link check it 'I accept the foregoing." and after that click on the " Next " button.

  MODEM DRIVERS

  Conexant Modem here (A worm 7.61.0.0) (Vista) - If you have the sound card Conexant

  Motorola SM56 modem here (ver6.12.6.0 A) (Vista) - If you have the Realtek audio card

  HP QUICK PLAY 

  HP QuickPlay here (ver 3.7 v.6112 for 32/64-bit Win7)

  Notes:

  • It must be installed before HP Quick Launch Buttons.
  
  
  • You have installed this software and it crashes when you use?

  Uninstall your current version of HP QUICK PLAY and install what you had in Vista.

  Resources:

  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  If you've burned CD/DVD with C:\swsetup folder as proposed in the guide then you will find it.

  HP Quick Launch buttons

  Solution on KEYBOARD FILTER with yellow exclamation mark ()  

  HP Quick Launch buttons here (ver 6.50.13.1 for 32/64-bit Win7)

  WIRELESS DRIVERS

  Intel Wireless here (ver 13.0.0.107 for 32/64-bit Win7)

  Broadcom wireless here (ver 5.60.48.35 for 32/64-bit Win7)

  Atheros Wireless here (ver 8.0.0.316 for 32/64-bit Win7)

  HP wireless Assistant here (ver 3.50.12.1 for 32/64-bit Win7)

  Bluetooth wireless here (ver 6.5.0.2000 for 32/64-bit Win7) only for models with Bluetooth.

  Note:

  How to install the Bluetooth driver?

  Click on the link below:

  How to install the driver Bluetooth HP Windows 7.

  ETHERNET DRIVERS

  LAN Realtek RTL8101 here (for 32/64-bit Win7) only for models with Intel processor.

  Models with AMD processors need not install any additional Ethernet file, because the drivers for it are in the chipset package.

  CARD READER

  Solution on BASE SYSTEM DEVICE with yellow exclamation mark () 

  Ricoh 5 - 1 card reader driver here (ver 6.10.01.03 for 32/64-bit Win7)

  TOUCHPAD DRIVER

  Synaptics TouchPad here (ver 16.0.1.0 for 32/64-bit Win7)

  Note:

  Default is activated the scroll two - finger. If you want to use only one finger to scroll, check out the link below:

  How to change two - finger scrolling on One - Finger scrolling in Synaptics TouchPad software.

  ONLY IF YOUR MODEL: WEBCAM 

  CyberLink YouCam here (ver 2.0.3115 for 32/64-bit Win7)

  Note:

  If you have a problem with your webcam, check below links to HP documents:

  Solve Webcam Windows problems

  Test a Webcam using your favorite Instant Messaging

  3VRX (optional software)
  

  on the screen the images and associated sounds that are displayed and heard when volume control

  3VRX here (version 2.5 for 32/64-bit Win7)

  Note:

  Here is YouTube video that shows what you can do with this software.

  ONLY IF YOUR MODEL HAS: FINGERPRINTS READER
  

  1. uninstall all software and previous fingerprint reader drivers

  Check below how guide (only it's non-standard uninstall process):

  How do I uninstall the driver and the AuthenTec fingerprint software

  2 you can install now correct fingeprint reader driver and software.

  There are two apps that are available on this device:

  - AuthenTec TrueSuite

  and

  -DigitalPersona Personal (recommended).

  Information on how to install the software you will find below guides:

  AuthenTec TrueSuite, fingerprint AuthenTec and Windows 7

  DigitalPersona Personal fingerprint AuthenTec and Windows 7

  ONLY IF YOUR MODEL: DVD PLAYER WITH LIGHTSCRIBE

  How can you check is your DVD with Lightscribe drive?

  The Panel of DVD, there will be a Lightscribe logo.

  

  LightScribe Host software [Link removed - Site is no longer available] (worm 1.18.22.2 for 32/64-bit Win7)

  Report of the changes that have been made in the guide

  Edited the 16/01/2010 updated Synaptics TouchPad driver to ver 14.0.3.1, update Broadcom driver to ver 5.60.18.41

  Edited the 18/01/2010 updated nVidia Graphic article. Adding drivers for nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS (version 195.62)

  Published the 19/01/2010 updated LightScribe software 1.18.10.2 worm host

  Edited drivers fingerprints of 02/05/2010 update, software and added guides to fingerprints.

  Published the 2010-02-27 updated LightScribe Host at worm 1.18.11.1 software

  Published the 03/03/2010 update HP Quick Launch Buttons to worm 6.50.13.1

  Published the 03/20/2010 updated Synaptics TouchPad to worm 15.0.9.0 (this version allows multitouch gestures)

  Published two guides added 21/03/2010. How to remove drivers Windows system nVidia graphics and how to install the HP Bluetooth driver in

  Windows 7.

  Published the 03/25/2010 updated LightScribe Host at worm 1.18.12.1 software

  Changed name Intel Matrix Storage Manager published 26/03/2010 to the Intel Rapid Storage Technology technology, has added Intel Rapid Storage Technology

  worm 9.6.0.1014

  Published on 31/03/2010 update nVidia graphics with uninstall guide section, updated drivers for nVidia GeForce 8400 M GS and 8600 M GS

  worm 197.16

  Published the 04/10/2010 updated LightScribe Host at worm 1.18.13.1 software

  Published the 05/04/2010 updated LightScribe Host at worm 1.18.14.1 software

  Published the 05/05/2010 updated Synaptics TouchPad driver to ver 15.0.13.0, updated HP QuickPlay for ver 3.7 v.6112

  Published 21/05/2010 Update for ver 5.60.48.35 Bradcom, Atheros wireless to worm 8.0.0.316 update, update Synaptics touchpad wireless

  15.0.13.3 worm

  Edited the 24/05/2010 update HP Wireless Assistant to worm 3.50.11.2

  Edited the 24/06/2010 updated Synaptics TouchPad to worm 15.0.17.4

  Published 30/07/2010 update Broadcom wireless - the same version but with a few improvements, HP Wireless Assistant updated to ver 3.50.12.1

  Added drivers published 04/01/2011 for nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS (ver. 267.76)

  Published the 04/02/2011 update software LightScribe Host at worm 1.18.22.2, added a guide: how to change two - finger scrolling on One - Finger

  Scrolling in Synaptics TouchPad software.

  Published driver update 12/14/2011 for technology Intel® Rapid Storage Technology

  Published 05/07/2012 updated driver for HP Bluetooth worm 6.5.0.2000, Synaptics TouchPad driver to ver 16.0.1.0, updated guide: how to install

  Driver HP Bluetooth Windows 7

• Cannot find the latest firmware for the Toshiba 40TL838G

  Hello

  I am trying to download the latest firmware for the 40TL838G model, but I'm not.

  Where can I find it?

  Thank you.

  The same has been asked in this thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=73914

  We can receive the update only via a network update
  In which case you will not receive updates via the network, your firmware is up to date.

• Error message on the download of update of firmware for airport

  Get an error message when you try to download the update of firmware for the airport. Have disabled the Wi - Fi for all devices; powering down of the airport; MacBook connected to the router via a cable; access to Internet but the download update still gives an error. Any ideas on haw to get the update, or what is the problem? Thank you.

  The error message say, exactly? What version of Mac OS X you are running on this machine?

  For updates of the firmware to work, you must be connected to your device from the airport and connected to the Internet at the same time. If you have a situation where you have to disconnect from the Internet to connect to your airport device, it does not work, at least not for the first time, you have to download a firmware version for the same model of AirPort base station.

• restore the firmware for macbook pro 13 mid 2009

  Hi all! This is my first time using the support community so forgive me for any rudeness and English summary.

  I recently bought a used mid 2009 macbook pro 13 "with no disc on this subject, I installed a new empty 120 GB ssd drive.

  I asked a friend and he has downloaded and made me a usb bootable with osx on it (lion). I instaled the osx and got the macbook running successfully and it was perfect.

  I decide to update and went up el capitan wich sucessfully installed. After the update I tried it out, web navigation simple, when suddenly, out of nowhere the mac stop (much battery left and the led indicator to confirm) and has not started since... when I turn it on the led light flashes and it gives the s.o.s. beep (3 short beeps followed by 3 long beeps and then 3 short beeps) the optical drive made his usual looking noises of boot and the fan continues to spinning, I tried to remove the battery 10 minutes several times and nothing... I read a lot about the problems of ram tested with one stick at a time in the two slots and no improvement... bought a new pair of hynix 2 gb 1066 mhz pc3-8500 ddr3 sticks as recommended for this model and replaced the "old"... did nothing.

  I have no original discs just the macbook itself and the charger. Also tried to boot from the usb drive... not good... tried to start mode revovery... nothing that the black screen and a beep sounds.

  I did some research and read a looooot online and in discussions such as this apple and found it to be the sound warning for bad/corrupted efi rom (as opposed to the majority of people declaring it to be a ram issue) which needs to be restored or flashed... However, apple does not provide or at least I can't find a picture of recovery for my model cd special I know it's the macbook 5.1 (a1278 / emc2254). Is there any solution for this? Please help in some way that you can welcome suggestions!

  Thank you

  Then, you say at the end of your post, you say that it is a MacBook, but it is a MacBook Pro. Check which model you have.

  On the updates of the EFI and SMC firmware for Mac computers with Intel processor - https://support.apple.com/HT201518

  What to do with all these "beeps mean at the start? - http://forum.insanelymac.com/lofiversion/index.php/t62919.html

  Power on self-test beep definition - part 2 - http://support.apple.com/kb/HT1547 - old Macs

  Mac Power on Self Test RAM Intel processor error codes - http://support.apple.com/kb/HT2341

  iMac (mid 2007) and later models: on startup tones - http://support.apple.com/kb/HT2538

• Where to download the firmware for Toshiba 19BL502B TV

  Hello

  Is there a place where I can download the firmware for my Toshiba 19BL502B TV, so that I can install on a USB key and update?

  I've already asked about the firmware that supports Xvid in the forum "New TV model Discussion", but had no luck. As I said in my previous post, the online manual for the machine indicates she has support Xvid, while my paper manual is that the part removed.

  My previous post was:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=134

  And here you see a photo with a comparison of the two manuals.
  I seek to change the firmware of the TV so that it supports Xvid, whether a new firware update or an older one.

  Thank you

  Frank.

  Hello

  Have a look here:
  http://www.DL.Toshiba.com/dly/index.jsp?region=GB&lang=en

  This is the place where you can download the firmware for Toshiba TVs

• New firmware for the required SSD THNSNC256GBSJ

  Can I get a new firmware for my model THNSNC256GBSJ s/n 51GB50HNK6LK SSD
  8.1 x 64 installed on my Windows System.

  To my knowledge, an update of firmware for THNSNC256GBSJ isn't available.
  But why are you talking about firmware update?

  SSD drive is recognized in the BIOS?
  If so, you don't need any SSD firmware updates to install Win'a 8.1

• How to upgrade my Firmware for printers?

  Hello

  I'll post a quick tutorial on how to upgrade the firmware for your printer.

  Whatever printer you have to do most of your print, there are a few things you can do to ensure that it runs optimally. According to the model and printer ship date, you can have a few updates to make as your printers may not have shipped with the driver or the most recent firmware.

  There are many reasons why these updates are important. Driver updates will make your printer run more smooth and faster from your computer or the printing station. They will also update Media preloaded into the pilot that they become available on the market, so that you can easily print on these materials.

  Firmware updates also make sure that your printer works more fluid and faster, but this applies to the material itself. Firmware is only the software that is loaded in your hardware. Latest firmware updates for some models of printers decreased paper and ink waste and increased print speeds.

  Now to download the latest version of the software that you will need:

  1. Go to HP.com support & drivers
  2. Click on the green box
  3. Type the product number of the printer that you have
  4. Select what OS you have on the desktop / laptop
  5. After that, you can go ahead and get the latest version of the software that are available on the list.

  

  Remember if you find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.
  I really appreciate it!

  Once you install the firmware, it will give you a list of instructions on how to load the update to the printer.

  Let me know if you have any questions.

  Thank you!

  I hope it's useful!

  Thank you!

• Need FirmWare for MAST * UJ141ES BD - CMB

  Can you please help me find the latest firmware for MAST * A BD - CMB UJ141ES?

  Thanks in advance

  You have a problem with the optical disc drive?
  Did you check the Toshiba download page for your laptop model?

• Cannot find firmware for my 24D1333B

  Hello

  I bought this TV through Amazon, but I can't find the update of firmware for it.
  The model does show up on the Toshiba site (http://www.toshiba-om.net/firmware.php).
  Can someone help me please?

  Thank you!

  Is there a problem with this new device?

• Firmware for the Alpha A65

  What is the latest firmware for the A65 Alpha as of February 17, 2013

  From this date, Version 1.07 is the last update of the firmware for the camera I AM-A65V. It can be downloaded from the Sony eSupport at http://esupport.sony.com/LA/p/model-home.pl?mdl=SLTA65Vsite.

  If my post answered your question, please mark it as an "accepted Solution". This will allow users to more quickly find verified solutions.

• Can not find the latest Firmware for QX10

  I got an automatic notification that there is an update of firmware for my QX! 0 a couple of days. I did not take in the details then. However when I search the site Support of Sony, it only refers to an update in dated date in 2014.

  Does anyone know the exact URL to get the lates firmware?

  Thanks in advance.

  The latest version of the firmware for the DSC-QX10 is 3.00 released 04 14, 2014.

  You can find the new firmware at: http://esupport.sony.com/US/p/model-home.pl?mdl=DSCQX10&LOC=3#/downloadTab

  Select the operating system of your computer (the update of the firmware is available to run on Mac OS x and any version of Windows XP 8.1.) and click on the Firmware.

• Firmware for DVR-K12TBS

  Hello

  y at - it ja new Firmware for the DVR-K12TBS from Toshiba DVD burner? (Model No. PA3358E-1DV5)

  My current Firmware is 1.15 (09/2004)
  It is very old and there are several DVD + r that I can burn only at low speed.

  Thank you.

  Thomas J.

  Hello

  Well, it would be very interesting to know what unit you have.
  However, you can consult this Toshiba download page:
  http://www.Toshiba-Europe.com/storage/Index_home.asp?nav=Hom&page=Hom&frame=home&model=x

  or this one:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good bye

• Need firmware for my Toshiba 32CV515D

  I need a firmware for that television, I don't find it anywhere and the tnt on it is just horrible. it freezes all the time. I have version 1.1. can someone tell me where I can download a newer version? I can't find anything by the tv or on the toshiba site, and it's incredible... this tv isn't 10 years!

  Thanks for the help... :(

  .... If your TV model isn't listed there, then a new update of the firmware does not exist.

• Update of firmware for 40TL963RB

  Good evening!

  I bought a Toshiba 40TL963RB TV.
  However, after a collapsed while respond during startup (black screen and light green only).

  I used flash USD to engrave some firmware.
  However, this firmware was for television 40TL933.
  For example, I burned 3 files (on my USB key):
  TL_MBOOT_545609_INIT_CLEAR.bin
  TL_MFC_246009_INIT_CLEAR.bin
  40TL933K_644087_INIT_CLEAR.bin

  These files as firmware my TV works fine, wait for the DVB - T2.
  I guess that this 40TL933 is not compatible DVB - T2,
  However, my 40TL963RB should support DVB - T2 hardware (I read the specification).
  However, the feature DVB - T2 has been lost during the combustion of the firmware.

  I downloaded the latest firmware for 40TL963RB: tl963_993045.bin.
  I have renamed it to 40TL963_INIT_CLEAR.bin.
  television begins the process of updating the firmware, but unfortunately, it frozes (hangs up)
  during the update firmware on 1% (always).

  Also I tried other firmwares: TL966, TL968, TL969, a version of 933.
  The same result - hangs at 1% during the update.

  Any ideas?

  I guess I need binary MBOOT & MFC binaries for my 40TL963. Am I wrong?

  Thank you very much!

  Post edited by: GkmSoft

  In my opinion its very bad idea to use the firmware that is NOT specially released for your Smart TV.
  I don t think that the use of this firmware not compatible could be very useful.

  You said, your TV no longer responds to the start.
  In my opinion there is nothing to do with the firmware of the TV because TV should work even if the firmware is not updated. I think that your TV equipment malfunctions.

  I m not Smart specialist not in TV, but there is not a lot of parts that can be replaced: motherboard and LCD screen are the main components and I think that TV does not answer the needs of TVs one motherboard check

  By the way: I found the firmware for model: 46TL963RB
  [Firmware Update Version 6.9.9E.1 | http://www.dl.toshiba.com/tsb-dtv/NA/GB/DE/46TL963RB.html]