Hit to the broad area when the server is connected to the internet

We have a new server running windows standard server 2008R2. When the server is connected to the internet, the computers on the domain are faced with offshore and they receive the error message saying "Unable to connect to the database". How we solve this problem?

Hello

I suggest you according to the question in this forum and check if that helps:

http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

It will be useful.

Tags: Windows

Similar Questions

  • When I try to connect to my internet in my house is not picking up my my modem signal... any suggestions

    Since the other night, I tried to connect to internet in my house and for some reason that my computer will not pick up the signal from the modem. It does not make sense to me. He'll go get my neighbors and other peoples but not mine. My office receives the signal very well, but my laptop will not.

    Hello

    All changes made to the computer before the show?
     
    Method 1:
    Check out the link and follow the steps.
     
    Method 2:
    You can also visit this link and follow the steps.
    Method 3:
    Check out the link and follow the steps in section allows you to configure a wireless connection.
  • Time synchronization problem = > there are currently no server to connect to the service connection request

    I see the following error when you run the harness; It seems to relate to the logging in vCenter.

    20120302 14:12:21VMmark2: Verifying time synchronization Client
    20120302 14:12:21Tile 0: Listen to Client 1330726341: the customer client0 time: 1330726341: TimeErrors: 0: Clock Skew 0
    20120302 14:12:23Stafcmd process: vCServer: audit VXGLE2VMVC01. VXGLE2. VTG. VCE.COM synchronization time failed start/finish. Gave: RC = 10002, STAFResult = {'files list': [{"staf-map-class-name": ' STAF/Service/process/ReturnFileInfo', 'data': ' System Error 1311 has occurred.\r\n\r\nthere currently no login server available to process the logon request is. \r\n\r\n', 'rc': '0'}], 'key': None, "staf-map-class-name": 'STAF, Service, process, CompletionInfo', 'rc': '2'}
    20120302 14:12:23Stafcmd process: vCServer: audit VXGLE2VMVC01. VXGLE2. VTG. VCE.COM synchronization time is also returned: STAFResultContext. User display job log
    20120302 14:12:23Error! [Clients or vCServer out of Sync:]

    What is the cause and how can I solve this problem? I can RDP of the Client to the server vCenter (VXGLE2VMVC01. VXGLE2. VTG. VCE.COM). I can also staf ping virtual machines from the privileged client. I lilies on the cached credentials can cause this kind of problem in a Windows environment, but I don't know if it is applicable, or something else.

    I carried this tile over an another Vblock and have worked in recent weeks to make it work. She was running nearly on the other Vblock; I got a mail server problem to solve... but he could run everything.

    Thank you!

    Like James, I'm really not versed enough on AD to determine if the problem is there.

    Here as a test script that should help you to try out different options (credentials, ip, etc.) outside of the bundle, so you can speed up the trials.  I put it so its exactly like the VMMARK2.config that you sent, but it should be pretty easy for you to modify as needed.  Do not forget to leave orders STAF and run it from a shell.  Maybe a few different iterations will shed light on the problem.

  • When I transfer mail, if I click a recipient and hit return, the name of the recipient is replaced by another name in the address book.

    When I transfer the mail on ICC, if I click a recipient and hit back, the recipient's name is replaced by a different name in the address book.

    It's bug and the bug fixers are working on it as soon as possible.

    The error only occurs if you use the key "TAB" or "Enter".
    So if you physically use the mouse to select recipients, and then click on in the other field, etc. - do not use TAB or Enter, then the fault does not occur.
    As an alternative, I highly recommend that you use the following method in the selection of contacts in new e-mail messages or in the transmission of emails.

    In a new message of Scripture
    Use the "Contacts sidebar". See the image below.
    If you do not see, then activate.
    'View' > "Contacts Sidebar" or toggle the view using the f9 key
    Select the address book
    Select the contacts
    Click on the button 'TO Addto' or one of the other options.

  • Keep gettig this error message when you try to connect to Firefox, the proxy server refuses connections.

    Redownloaded Firefox and keep getting this error message when you try to connect: proxy server refuses connections

             Firefox is configured to use a proxy server that is refusing connections.
    
     Check the proxy settings to make sure that they are correct.
     Contact your network administrator to make sure the proxy server is
       working.
    

    Go to Options > advanced > network > connection > settings, then choose 'no proxy '.

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    It is important that you keep updated IE. The information included with your question indicates that you use IE7; you need to update to IE8 for your own protection. IE9 will be available for Windows XP.

  • MAX crashes when you try to connect to the remote server in VISA

    Hi, I'm running a problem with MAX OR when trying to setup of a client/server VISA system.  I had the first server tried 4.3 visa but she not even me would record the port on the server settings.  When I tried to connect to the server from a remote machine to access the RS232 ports, it could hang NI MAX or do nothing, depending on how I tried to implement.  If I click with the right button on the remote system in the right configuration pane and follow the wizard through, it doesn't matter, if I go to the toolbar tools-NI-VISA options and follow the wizard, NI Max crashes at the end.  Then I went online and got the version 4.4.1 and tried with the same results.  I also have abnormalities in safeguarding some configurations OR max leading me to question if there are questions of privileges.  The operating system is Windows XP Pro with Service Pack 2 on all machines.  I'm logged on with administrator rights and everything seems to have full read/write privileges, but I still have problems.  The issue of saving the port settings, I tried manually setting the parameters, as described in

    http://digital.NI.com/public.nsf/allkb/8EBAEC8A57BB48BE862574F90072D3DD

    but unsuccessfully in version 4.3, but it worked very well when I upgraded to 4.4.1 without modification of rights or privileges so some things seem weird.  Any help would be greatly appreciated.

    Hardware Dell with Windows XP Professional and SP2 computers

    The server computer has a 16 port Rocket port RS232 port Council

    I will access ports with a program written in LV7.1, but I haven't gotten that far yet

    Network is fine, I can ping the server to the client computer and permissions are set on the server and the client is pointing the right machine.

    Thank you

    CS

    Thanks for the reply.  We use MAX 4.5 so it wasn't the problem.  We are not exaclty sure what the problem is / was set apart he healed himself when we all uninstalled and deleted the VXIPNP directory and reinstalled everything.  When we did, everything came and worked as it should.  One thing that may or may not be relevant, is when I was put in place of the customers, I went through the Options Tools - NI of VISA-VISA to complete configuration rather than right click on remote systems.  Previously, this would cause MAX to crash when you complete the wizard if I though it would be a good test when I put first and, since it worked, I followed this procedure on the rest of the computers.  Anyway the problem is solved and it works.  Thanks again for the input.

  • There are currently no server connection to the logon request

    I have domain and some 1500 client PCs do not connet with some PCs, services of the mistake, that there is currently no demand for logon login server. EXM:one pc (172.16.13.25) is connects with all other PCs but connects with path (172.16.13.24) sharing and printers sharing, when I try to connect the pc term congratulate display suite error message \\172.16.13.4 is not accessible. you might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.  There is currently no server connection available to the logon client 2008 request.server services is xp sp2 do not have AD

    Domain/server/business questions are best addressed @ Technet.  Answers is more connected consumer.

    http://social.technet.Microsoft.com/forums/en-us/categories/

  • The FTP folder error when you try to connect to a folder on my Web server

    When I try to connect to a folder on my server using Windows Explorer, I get the following message...

    "Windows cannot access this folder.  Make sure that you typed the filename correctly and that you are authorized to access the folder.

    Details:
    A connection with the server could not be established.

    In the knowledge base, kb/260156 says it's because of me having reserved characters.  However, my password has no reserved characters.

    Can anyone help with this?

    Graham

    Hello
    I suggest you according to the question in this forum and check if that helps:

    http://social.technet.Microsoft.com/forums/en/winservergen/

    It will be useful.

  • When you try to connect from my vista desktop to my laptop windows 7 through the DRC I get the error "unable to connect to the gateway terminal server."

    problems of the DRC of vista for windows machine 7

    I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server."   Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.

    can someone shed light on this please?

    Hello

    Temporarily disable the security software on both computers and check if it makes a difference.

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  • Error: "Setup cannot continue because you are not connected to the internet or the server is unavailable" with install LifeCam

    Original title: Microsoft LifeCam VX-3000 installation problems

    On the insertion of the CD, I get an error message that says:

    "Setup cannot continue because you are not connected to the internet or the server is unavailable.  Connect you to the internet and run the SETUP again.  During the installation process, accept all safety messages or a firewall. »

    I am connected to the internet and have tried the setup.exe and allowing the CD auto load with the same error several times running.    (Windows xp / laptop Toshiba - all system bus met...)     Thanks for any help!

    Hi kb11a,

    The Knowledge Base article has many resolutions for this issue. Follow the steps. I hope that one of them will fix the problem of the installation.

    Resolve the error "Setup cannot continue" when you install the LifeCam software
    http://support.Microsoft.com/kb/973297

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

    When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

    After spending most of the day on this I found that my password required to upgrade... so two of my sites are now meet Dreamweaver. And the other will be taken care by the owner of the Web site. Thank you, Nancy!

    gay

  • El capitan crashes when you are connected to the internet ONLY

    If not connected to the internet, the computer will run all day without any problem, any help would be great, thanks

    These must be run as administrator. If you have only one user account, you are the administrator.

    Please launch the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    In the Console window, select

    DIAGNOSIS AND diagnostic USE information reports ▹ System

    (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu bar.

    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

    If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

    In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

    Please do not post other types of diagnostic report.

    I know that the report is long, perhaps several hundred lines. Please report all this anyway.

    When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • When I am browsing the internet using Safari and I'm looking for something like a plumber he gives met with responses from an area not my own.  How can I change this?

    When I'm surfing the internet using Safari looking for a product (like a plumber) all my suggestions come from the vicinity of Tyler, Texas.  I live much closer to Dallas.  How can I change that.  Thank you!

    You have location services? Are you allowing access from Safari to your location? You must check in the settings > privacy > Location Services > Safari Web sites. If she knows exactly where you are, then you can get these errors.

    I'm sorry, I just realized that you were referring to the Mac computer. My answer was for an iPhone. I can't help you with the Mac.

  • all domain controllers are running windows server 2000 with the company wants to set up a more secure network server OS the company will modernize the ADS?

    you are the network administrator for abc.com domain. All domain controllers are running windows server 2000 with the company wants to set up a more secure network server OS the company will modernize the ADS?

    Please repost your request in the appropriate in the Windows Server Forum.  Thank you!

  • the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I am disconnected and then reconnected___

    the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I disconnected and then reconnected.

    I just ran windows update on a large number of files all successful before this happened, it happens when I am connected to the internet, I use dial-up access

    added on 25/11/09 still have the problem mentioned above, even explore two windows are runnibg on the system, or two IE browsers running?

    Added 27/11/09 I ave followed all instructions up to and including thefix tool kb/93623, stiil I have this report of windows Defender quickly appearing twice in a row, then I'm disconnected from the internet. any more ideas thanks sam

    Visit this link:
    http://support.Microsoft.com/kb/936213

Maybe you are looking for

  • phone does not work

    phone does not work < re-titled by host >

  • How to configure an Outlook on my Macbook 10.10.5 Yosemite account?

    Asked me to set up an email address Outlook on my Macbook pro using Yosemite 10.10.5 because I need an organization to communicate with its members, the address book.  However, I can't find some way to create an Outlook e-mail address.  Does anyone k

  • Installing the Intel driver

    After a fresh install of Win 10 (Microsoft ISO), I tried to install the Intel driver. First of all, everything works and Microsoft installed a driver that seems to work with the installation of Win10. But with regard to the double graph I want instal

  • Get rid of the file belonging to the outdated domain account

    I have a laptop that allows to have a domain account.  The account did not exist on the domain for years (and in fact, I did have access to the area for years).  On the laptop, I finally migrated the content of the domain account obsolete to a local

  • Uninstall a program preinstalled on my computer

    Hello Recently bought my HP model: HPE-551sc with Windows 7 64-bit... 'Norton Online Backup' is preinstalled on the hard disk for some reason any...? I have a cheaper and better than Norton program and of course I don't want Norton must be installed