Hitachi TravelStar 5K 160 in Toshiba Tecra M3

Similar Questions

• Need to remove the password on Toshiba Tecra A8 BIOS

  Hello. Dear can Technical Support, you help me remove the password on Toshiba Tecra A8 BIOS?

  Challenge Code = GH1PF-YLL2C-CKQVT-K2U75-JJF0K

  You must send in a center of Service from Toshiba for password removal. There's no other way.

• Toshiba Tecra A2 - TONE TEST FAIL

  I have a problem with the MODEM! (new Toshiba Tecra A2, Windows XP Pro, SP2)
  Toshiba PC Diagnostic Tool - the Modem test:

  1 modem Controller Test - fact - Pass
  2. test tone - done - FAIL!

  I read everything on your page (forum) and you do not provide an appropriate solution. Many people have the same problem!

  For example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=2191&MessageID=6099#6099

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=474&MessageID=1132#1132

  So please tell me where is the problem?
  What should do? Some new drivers of your company?

  1. check if the modem is entered in the Device Manager
  2. check if the modem is configured and that it works?
  The Control Panel must be open and go to the phone
  options of modems and. It should be your modem!
  If it is not shown to you, then you must install the
  modem driver.
  3. double-click on modem and go to the Diagnostics. The
  modem query button queries the commandments with
  check the return signal. This will give you some additional information
  the modem works properly.
  4. then set up a standard dial-up connection to your
  provider of
  5. go in the properties of the modem (Device Manager) and the
  Check the brand in the "wait for dial tone before dialing" has NO
  been resolved!

  Everything has been done! Query was OK... everything seems to work... I tried so many different solutions... Please tell me you have something for me, it works... don't answer me to simply reinstall my windows! Where is the trap!

  Hello

  Is there any problem in Device Manager with the modem? There is a yellow question mark? I'm not 100% sure but I think that you will always have this problem with test tone if the modem is not properly plugged into the phone line.

  Have you ever had some problems trying to make the connection to the internet provider?

• 15.04 Ubuntu brightness keys do not work on Toshiba Tecra

  Hello!

  I I m install the new version of Ubuntu 15.04 in my computer toshiba tecra laptop.
  In this version the brightness keys to work but do not to set the brightness of the screen.

  Possible I have ts to solve this problem?
  Thanks for all the ansvers!

  Sorry for my English!

  Good news!

• Toshiba Tecra A3 - problem with Port Replikator III

  Hello

  I have a problem with a Toshiba Tecra A3 combined with a Port Replikator III. Both work very well together until you disconnect the laptop computer. After you start the Toshiba Tecra A3 without the Docking Station, everything is always ok. But when I anchor again and start it, Win XP is not able to display the logon session on the external monitor screen. All configurations, I did (for example only display on external monitor) with the mobile extension module are only available after login. But when I don't see the logon screen, I can't do that; (o). so, does anyone have a solution how can I use the external screen after the boot (without using the FN + F5) key.

  any help is much appreciated
  Thank you
  Mario

  Hello

  As far as I know logon window can be displayed on the primary monitor only. Computers laptop LCD is set to a primary, and it cannot be changed. As you can see this option is grayed out in display properties.

  Good bye

• Toshiba Tecra M2 - very slow performance

  Hello

  During the last quarter of 2004, we invested on two Toshiba Tecra M2 with Windows XP SP2 and standard generation of Tosh.

  In addition, laptops are configured for our use and loaded with the following software:
  * MS Office 2003
  * Autocad 2002
  * Photoshop CS

  Configured for our use and now affected by a shift of noticeble during the task execution when:
  * opening closing documents MS Office 2003 Pro power switch of the network)
  * create opening files and of new designs/plot in Autocad 2002 (with the latest service packs and patches loaded)
  * loading Photoshop CS and various applications.

  Because of the date of purchase of these laptops, we were informed by our reseller, we cannot return these items. Now, we're certainly stuck with them, but I need to find a solution as to why they are slow in performance, fix it right and lie to my peers.

  Thanks for your time.

  Laure

  Hi Philippe,.

  As far as I know there are Tecras with several specifications. Can you please tell us are you?

• Cannot change the brightness on Toshiba Tecra S11 with Win7 using the FN keys

  I can't change the brightness on Toshiba Tecra S11 with Win7 using the FN keys (disable audio and other work fine) when logged in as a normal user.
  Shortcuts keyboard console appears and pressing F6 or F7, the brightness is always set to level 1 (no matter how luminous monitor is really) and cannot be changed.
  I can change it via power or Administrator Options.

  Hello

  Maybe you didn't install VAP (value added package) for all user accounts.
  Please reinstall VAP by using your user account.

  You can also check if the user account is the Admin right supported.
  You can run simple applications (exe) as an administrator.
  For this, he must right click on exe file (value package) and should choose + Run as administrator. +

  Check it!

• Toshiba Tecra 9000 noise

  Hi all

  I just bought the Toshiba Tecra 9000 Pentium 3 1 GHz, 256RAM of ebay. The problem is that after the start of some video applications or sometimes even opening new Web site which is in Macromedia Flash, I hear a strange noise, which I think is the hard drive. The sound is similar to the CDROM when you put there CD and he starts reading.

  Maybe someone has any suggestions about who and can help out me. Maybe I have not configured something right.

  Thank you in advance.

  Hi mimi,

  have you bought also the recovery and the tool & Utilities CD with the laptop? To exclude a software failure, you need to retrieve the laptop!

  If you do not, you should your system clea. Perhaps it is a program which read or write to the hard disk at high speed!
  Theo Bye

• Toshiba Tecra 8000, monitor problem

  Hello

  I have a problem with my laptop Toshiba Tecra 8000, there is a green line with a width of 1 pixel on the screen of my laptop which does not disappear. the laptop is almost 2 years old. is there a possibility that it could be repaired? Thanks in advance,
  Mark Kuiper

  Hello

  interesting would be if the green line is permanently on the screen during startup or 'just' that Windows runs.

  But never mind, the laptop Tecra series three-year warranty.

  So in this case you can give it to a Toshiba repair for a control center upward.

  Good bye

• 3G on TOSHIBA TECRA A10 - 13I

  Hello
  My Toshiba TECRA A10 was XP and the Broadcom Mobile 3 G was OK, f3507.
  Since I've upgraded to windows 7, it is impossible to connect.

  I loaded the 3 programs on support of Toshiba.
  The Wireless Manager won't launch and shut down.

  Sorry for my English! and thanks for helping me

  Roland

  Hi Roland

  You have chosen this question as answered.
  You always have this problem with the 3G?

• Toshiba Tecra A10 - 11 M 3 G modem

  I have a Toshiba Tecra A10 - 11M and a modem 3G integrated F3507g I gave diagnoses.
  Which means that "Radio attached"NO? '" Here is the picture.

  Is this a problem? Or wrong? To enter service? Thank you

  Hello

  This message indicates if the card can be connected to the internet service provider. With other words, it shows that your card is not compatible with the available provider.

  So what you need to do is to contact the provider of the internet and to clarify this point.

• Toshiba Tecra S1 energy saver - cannot install

  Hello!

  I formatted my laptop a toshiba tecra s1 and installed win xp pro sp2 without the oem CD! I installed xp from my own licensed version of my school, it's a full version, not oem. now, I tried to install the toshiba power saver, but when I run the Setup, an error occurs: "driver not found!" This configuration will be terminated! ». someone told me that there is some time, I have to install first the Toshiba ACPI common Modules for Windows XP, after installing common tools, I'll be able to install energy-saving. My problem now is that I don't think the Toshiba ACPI common Modules for Windows XP for my tecra s1. I find the tools for all other portable Toshiba, but not for my s1.

  can you help me, I need the energy saver because I don't want that my cpu work fullspeed always :(

  thx for your help, sandass

  Post edited by: sandass

  Post edited by: sandass

  Hello

  First of all, you need to install the Chipset utility. Follow this link.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=it

  Once empty it first developed for laptop. Then Tecra. Tecra S series, then S1. Then XP operating system. Then click on search. Once this happens find the chipset utility and install it. Then, you can install any other drivers you need well enough in any order you want. But you must first install the Chipset utility. I hope this helps you and solve you this problem. Good day!

• Could re: Anyone tell me the release date for the Toshiba Tecra S10-106

  Could someone tell me the release date for the Toshiba Tecra S10-106. What would be the estimated price for this model.

  Thank you

  I already posted this in your other thread on Tecra A10.

  On the Europe of Toshiba page-> Products->-> Tecra laptops, you will find a whole list of different series and Tecra models.

  Right now I find only the info that these phones will be available soon.

  You may need to wait a bit...

• How to clear the power on password in Toshiba Tecra M3

  Hello

  I * Toshiba Tecra M3 *, my wife set * power on password * and she forgot what was the password. Everytime I turn on my laptop it's toshiba Boot logo and then it comes black page and the password required like this:-* PASSWORD = *.

  I sent it to the PC technician but he failed to fix it, he said, it is best to clear the CMOS settings, but it didn't find there because maybe he thought his old similar notebook that has battery; I told her my laptop is a computer laptop last may he joined the CMOS chip with its battery.

  * Any help please, I have valuable information in my laptop.*

  Thankx

  Allytz

  Hello

  I think you're talking about the BIOS password...
  Bad new budd... the password of BIOS should be removed by Toshiba ASP.

  You may not remove if you forgot!

  Then, contact the local ASP and ask for later handling.

  Good bye

• Wil Windows does not recognize a SATA Hitachi Travelstar HARD drive

  Drive HARD Hitachi Travelstar SATA will not be recognized by Windows Vista.  What can I do?

  WINDOWS VISTA (64-bit)
  I have updated all drivers and updates on the site.

  BIOS SATA value "compatibility."

  I now have the following devices in Device Manager:
  -IDE ATA/ATAPI controllers
  -ATA Channel 0
  -ATA Channel 0
  -ATA Channel 1
  -ATA Channel 1
  -Intel(r) ICH9M/M-E 2 port Serial ATA Storage Controller 1-2928
  -Intel(r) ICH9M/M-E 2 port Serial ATA Storage Controller 2 - 292D
  -Ricoh Memory Stick Controller
  -RicohSD/MMC Host Controller
  -Ricoh xD-Picture Card Controller

  UBUNTU 10.04 LTS (32 bit)
  When asked if I had plugged into another computer with an eSATA port, I
  thought about running another operating system would be equal to another computer
  with these results (see screenshot).

  BIOS SATA value "compatibility."

  eSATA connection recognized under ubuntu using port ICH9M/M-E 2
  IDE SATA controller on the same host PATA as CD player adapter
  as seen in Ubuntuscreen shot.

  Page saved to connected eSATA hard drive Hitachi.

  Go to the web site of the manufacturer of the computer and see if they have downloads of BIOS update available for your system and your version of Vista.  If so, download and install it and see if that makes a difference - the update may allow recognition to the (if the BIOS is the problem).  Are you certain that you have done all the necessary BIOS changes and that your choice is right for your situation - check this after update if you need to don't do only once.

  Are you absolutely sure that the drive is compatible with the system and your version of Vista and you have installed the drivers of proer? You have a SATA drive it before or is this the first SATA drive on this computer?

  Remove the disc, remove and replace all connections to ensure they are secured (at both ends) and check it out again.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.