Hold mouse randomly stops working

Similar Questions

• Keyboard and mouse randomly stop working

  My keyboard and mouse just randomly stop working. My indicator DPI mouse will blink for a few seconds, then none of them works. Regardless of what I ' do on my computer at the same time, normally it occurs smack dap in the middle of a game. But it can happen at any time, train to start my computer, hours after. I tried to reinstall all my drivers, hard reset my USB ports, and reinstalled windows, nothing has helped me. Also, if I play a game, nothing changes except the fact that I can't move my mouse or my type anything with my keyboard, if I am skpying with someone, my audio and microphone works perfectly fine, I just can't use my keyboard and mouse. My mouse and keyboard are standard supplied with my computer, the Studio XPS 8300. Regardless of the mouse I use, this always happens.

  Hey Cameron,

  Please contact Microsoft Community.

  It seems that you are facing problems with the keyboard and the mouse. Were there any changes made on the computer before the show?

  Follow these methods to solve the problem:

  Method 1:

  Run the hardware and devices Troubleshooter and check if that helps.

  You can also try to run Dell Diagnostics of material.

  Method 2:

  I would also say you update the drivers for the chipset for the computer and see if it helps:

  http://www.Dell.com/support/drivers/us/en/19/product/XPS-8300

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• keyboard randomly stops working and continues after reloading safari. Running El captain

  wireless keyboard randomly stops working and continues after reloading safari. Captain El running. He did once, using Word as well. On the occasion when his order in safari it works in Word and then stops again.  Y at - it a cache keyboard or something that needs resetting? Any help would be welcome.

  If your USB keyboard or wireless does not work

  Keyboard does not work

  Keyboard/mouse - troubleshooting wireless

  Reset an Apple Bluetooth mouse or Trackpad wireless keyboard (pairings and other common troubleshooting problems)

  Bluetooth devices no longer meet

  Sources of interference Bluetooth

  Sources of interference of Bluetooth (2)

  If your Wi - Fi connection is able to generate a 5 GHz signal, try this.

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• Satellite C660 - the mouse pointer stops working when you start program

  Some features:
  Toshiba Satellite C660-1r1
  Windows 7 sp1
  Avast Antivirus (free version)

  Problem:
  When I start a program (for example. Sonos controller) on my laptop my mouse pointer stops working. It does not happen with all programs! When I go into Device Manager, my synaptic touchpad and my hid mouse is working also. When I press ctrl - alt - del, the pointer can move again, but when I come back it stops again. I have a work around is not a solution

  When I disconnect my windows account and log in again, it will solve the problem. When I start a program again the pointer will freeze up again.
  I did a complete system of virusscan and a pre start virusscan and my laptop is virus-free.
  I uninstalled the mouse and in drivers reinstalled synaptics them but that has not worked. I added a new account windows but that did not work.
  By pressing the keycombo FN + F9 has no effect.
  I am somehow at the end of my ideas...

  Can anyone help!

  When I start a program (for example. Sonos controller) on my laptop my mouse pointer stops working. It does not happen with all programs!

  This problem happens using the touchpad only or have you noticed the freezing of cursor using the external USB mouse too?

  What is the notebooks touchpad works properly without loading and using this 3rd party software?
  For example, work the touchpad with Microsoft office (Word, Excel, etc.) or navigation in internet by using IE or Chrome?

  My guess is that the pre-installed 3rd application part could affect the functionality of the touchpad.

• 2.4 GHz HP wireless optical mouse has stopped working

  My wireless mouse has stopped working. I use it on a laptop Windows 8. I used this mouse wireless with this computer for almost a year. All of a sudden it just stopped working. I changed the batteries, so it wasn't the problem. I have uninstalled and reinstalled software and that did not work. Is there anything else I can try before I buy a new mouse? Product # is WT564A.  The model # is FHA-3510. The S/N IS CN1 [personal information]. Product #, model # and s/n is not the computer mouse. Any help would be greatly appreciated.

  Hey there eunash,

  I found three links that could help you, please take a look and try some of the steps:

  Keyboard and wireless mouse troubleshooting

  Mouse, touchpad and keyboard with Windows problems

  .. .and finally, check out the Merita post on this thread, they had some good ideas while explaining what might be going on: http://h30434.www3.hp.com/t5/Other-HP-Consumer-Products-and-Technologies/HP-FHA-3510-mouse-trouble/m-p/2666383/highlight/true#M10473

• sMy Microsoft UDB wireless mouse has stopped working. Can it be repaired or is it just did.

  My Microsoft 3000 wireless optical USB mouse has stopped working.  Can it be repaired or is it just did.

  Hello

  -Don't you make changes to your computer because of which the question began?

  I would recommend that you follow the steps in this article and see if they help.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

• My touchpad on my laptop and my mouse suddenly stop working.

  My touchpad on my laptop and my mouse suddenly stop working.  The cursor just sits there in the center of the screen.  Device Manager indicates that they are working.  I tried to remove the drivers and reinstall them without a bit of luck.   Help

  Hi Zippy,

  I suggest that you try to do a restore of the system, here a guide with Visual effects.
  See you soon ~

• HP touchsmart IQ775 Wireless mouse has stopped working.

  Wireless mouse has stopped working. I have a HP Touchsmart IQ775 so I can touch the screen to navigate. did a restore of the system in SafeMode this morning and everything works fine now, but of course, it happens again. Last week, the computer did an update to quicktime which disabled, so I had to completely uninstall quicktime and the mouse immediately worked. looked but could not find that whatever this is updated overnight to re - train the problem this morning. However, the system closed and said 'power system failure driver' cannot know how to fix this, all say updated mouse drivers. is associated it with? This not computer savvy, usually google problems on my ipod touch and looking and staring at me but were not able to understand this. Thanks for all the tips

  Hello

  HP also has their own update so he could be there?

  I would stop automatic driver updates, because they are often older certified and MS is far behind.

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
  ------------------------------------------------------

  This, to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Try to run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• USB mouse & keyboard stop working after the upgrade of Intel generic drivers drivers!

  Original Post: USB mouse & keyboard stop working after upgrade to generic drivers

  After you install Windows, the Generic USB controller drivers are installed. My mouse & keyboard as planned work & that are each recognized as "compatible mouse/keyboard HID."

  After I installed the Intel drivers for root USB controller, the mouse & keyboard stop working and are classified as unknown. Shortly after, they are considered HP USB Optical Mouse & HP USB Standard keyboard, however the drivers never properly install and they remain under unknown devices with a yellow exclamation point.

  I have searched high & low for these device drivers, they do not exist. I installed the drivers for all of the materials appearing on the site of the seller. This has happened on several computers, laptops and desktop computers.

  I've done all the troubleshooting I can think. Uninstalled all the controllers/USB hubs & restarted. Switched USB ports, I tried new mouse & keyboard, wanted Windows updates.

  The only way I can make it work is if I use the generic Windows drivers, who then recognized the mouse & KB "HID compliant". It seems that if I install Intel drivers, it recognizes the mouse & keyboard more in detail and he wants specific drivers to continue.

  Any help / suggestions would be greatly appreciated.

  Thanks for the reply.

  Because your computer is on a domain network, it would be better to be posted on the TECHNET forums. They are experts in your field of investigation and would be in a better position to answer your concerns.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w8itprogeneral&filter=AllTypes&sort=lastpostdesc

  In the future if you have problems with Windows. Not to contact us. We will be happy to help you.

• My cut copy and paste keyboard shortcuts has randomly stopped working

  my shortcut keyboard + x, C and V control has stopped working. I did not intentionally anything to turn them off, and after reviewing all the net for a solution I thought I would ask here cause I'm really at a loss

  Hi Crusix,

  Welcome to the Microsoft Community and thanks for posting the question. I understand that the keyboard shortcuts cut copy / paste randomly stopped working.  Let me help you with the issue.

  1. What is the brand and model of the computer?

  2. what security software is installed?

  3. don't you make changes to the computer before the show?

  4. What is the brand and model of the keyboard?

  To resolve this issue, let us try these methods:

  Method 1.

  Connect another keyboard and check.

  Connect this keyboard on another computer and check the status.

  Method 2.

  Try to use the on-screen keyboard on and check.

  Type without using the keyboard (on-screen keyboard): http://windows.microsoft.com/en-US/windows7/Type-without-using-the-keyboard-On-Screen-Keyboard

  Method 3.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  I hope this helps. If you need further assistance on this particular issue or any other related issue Windows let us know and we will be happy to help you.

  Thank you.

• My wireless mouse just stopped working. I can still use the mousepad however. I changed the batteries does not. Then I tried another mouse wireless, and it didn't work either.

  My wireless mouse just stopped working.  I can still use the mousepad however.  I changed the batteries does not.  Then I tried another mouse wireless, and it didn't work either.  What can I do next?

  Buy an inexpensive wired USB mouse for less than $5 and see if it works.  As far as I'm concerned wireless mice are more trouble than they are worth.  YMMV :-)

  Good luck.

• Mouse Bluetooth stops working when you use Remote Desktop

  Hello, I have a Dell i7 using Windows 8 and a comfort Sculpt bluetooth mouse.  The two work together well, but when I use remote desktop, the mouse stops working.  I have checked the logs of windows, but don't see anything apparent that would explain the bluetooth mouse to stop working with RDP.  Is this a known issue?  And is there a known solution?

  Hi Sharief, thanks for the quick response!  I think that I could find my own solution to the problem.  I ended up remove the bluetooth driver that came with my Dell laptop and allowed the Microsoft Generic bluetooth driver to take charge.  The mouse now works like a charm, especially when I am using RDP.   I did have a problem again on the generic driver.  Thanks again!

• My Apple wireless mouse has stopped working.

  Initially, software system warned me that the batteries are low.  Then it stopped working completely.  I replaced with new(tested good) AA batteries and the mouse still does not connect to my iMac. 10.11.3 is updated software.  My trackpad works ok so the BT Service is always good. I even tried an another Apple wireless mouse and it doesn't connect either.  Can an optical mouse as this just failure?

  A mouse can not just, indeed at the end of his life he cannot do anything else.   I think that your first test is to hold the mouse upside down and check if you have a green light display.    If so, the batteries are probably ok.   If the light flashes, it is most likely, connections are at fault.   Clean the inside of the battery carefully in case there is any residue of previous batteries.   Clean your battery connections and try again.   You could also try your mouse (indeed, two of them) with another computer, maybe a friend.   It doesn't matter if it's a pc.   That will confirm the effectiveness of the mouse.

  Magic Mouse 2 has been designed and developed for El Capitan (10.11.3)... so old mice may not work as well, but I have yet to hear any complaints.

• Mouse randomly stops on the desktop and in Windows 7 x 64 applications.

  (Clean), I installed Windows 7 64 bit on my desktop and have experienced random/the mouse cursor pauses while using the system.  The break is almost as if the system is in heavy CPU mode and then everything catches up.  It happens every minute about and lasts a second or two.

  The mouse is a Logitech MX510 wired (not wireless) USB mouse.   I use the Win7 default mouse driver (as recommended on the site Web of Logitech).

  I tried all of the following conditions:
  -J' kept the Task Manager open to see if it seems to be all rhyme nor reason for applications that are at the top of the CPU usage when the break happens, but have not been able to discern a trend.
  -J' tried several different USB ports, including the external USB hub as well as different ports on the system itself
  -J' stopped my antivirus real-time protection real (Microsoft Security Essentials)
  -J' used both the plain built Win7 in pilot as well as the software Logitech SetPoint (64-bit version)
  -I am at my last revision of the BIOS to my desktop (Dell XPS 710)

  This has no effect on the issue.

  Issues happening with open applications and with nothing else running but the OS (and appropriate background apps).

  Needless to say, idle random mouse is infuriating when you try to use the system for all the ideas are greatly appreciated.

  Thank you!

  I have dealt with this issue for some time and I think I can finally say that it isn't a problem of operating system. Same behavior takes place on MAC, Linux. Also, it is not limited to USB, bluetooth mice have the same issues. What I've found, is that there is a HUGE conflict between wireless devices that share the same 2.4 Ghz band (mouse, keyboards, routers, network cards, etc.).  It is not as noticeable on other devices because there is no visual indication of the problem, but the question is there (see latency).

  From what I can tell (I spit balling here) is too crowded. In simple terms, that's the radio band is too crowded. If you just pull the list of routers in many areas, you will see at least a dozen or more. Try this to humor yourself, start downloading something on a nearby wireless computer and see if the other PC mouse starts to work.

  I hope that that completely on this one cause if I'm right there may be not all patches to come until someone pass the mouse a bunch of diff.

  See you soon

• My magic mouse has stopped working.   Is there a battery that I need to replace?

  My magic mouse stop working.   Do I have to replace a battery?  If so, how?

  If it's a Magic Mouse 2 then you reload by using a standard USB cable Flash. The port is at the bottom of the mouse. If it's a Magic Mouse, then you must replace the batteries. Coverage is at the bottom of the mouse.