Home adsl wireless gateway

Similar Questions

• Need help setting up WebUI for the Wireless Gateway

  I have problem installing a Web UI for my demo project.

  I just do temperature is a simple application of WSN on a node of thermocouple WSN-3121 and it logging on a RT NI 9792 wireless gateway.

  Then, I wanted to create a web user interface and display whats in the user interface of the gateway - see the project.

  SO I'm stuck with the web INTERFACE coming.  I tried to read as much as I can but I still don't know what I'm doing wrong.

  As far as I see it, I need to create a web service in the construction for my gateway specifications and place the gateway_main.vi like the vi to use.  Then build and deployment.  Once it happened, and I run the vi on the bridge, I created a Web user interface as shown in the picture, where it counts the the gateway web service using 192.168.0.16:8080 - that works very well.

  When I run the Web interface, it is just and expires.

  I am using LAbview 2010.  Help, please.

  Hello markza,

  Your approach using the Web user interface designer and understanding its use case is quite accurate, the question lies in the web service, you have deployed. The VI you build as web service, which is gateway_main.vi, while loops inside and so cannot be used as a web service. The reason for the timeout is that your user interface Builder application calls the web service LV2010 and is stuck there for waiting time loops to complete. Also, the data type of cluster is not supported in the user Web interface Builder, so you'd have to break up from the entrance of the time of picking for the node wireless in two separate digital inputs.

  I recommend creating a Subvi out of your code inside of the while loop inside gateway_main.vi. The Subvi must have two digital inputs to replace the cluster (as mentioned above) and do not have one of the Boolean inputs Start or Stop. Output would remain the same, that is, two doubles and a Boolean value.

  I would like to know if this is useful and if you have any other questions.

  Thank you!

  Dieudonné jgfcnbh

  The user of LabVIEW Web R & D interface generator

• Can't detect the wireless, gateway 4025gz. mod, turn on wireless, Dosnt show the icon in the login screen. OK before wipjng drive.

  Can't detect the wireless, gateway 4025gz. mod, turn on wireless, Dosnt show the icon in the login screen. OK before wipjng drive.

  If it worked before wiping the disc, then it is likely, you are missing a player specific to material not included in WIndows XP.  Log on to the gateway website and download the drivers for the chipset and network.  Naturally, you will need to use a wired network connection.

  In general, Gateway provides the drivers specific to the hardware on a recovery of the system partition, and they also provide a tool so you can burn data on CD/DVD restore.  Do you stil have this partition or did you remove it?

  Every time I buy a PC, I always download copies of the material of the web site of the vendor-specific drivers and keep them on a flash drive, so that they are available when I wipe a PC and reinstall.  I also do the recovery partition recovery disks.

• HP Deskjet 2540: help! Cannot connect to the home network wireless HP 2540.

  So, I'm trying to connect my new wireless printer to my home network.  Yay!  I move into the 21st century!   Not so fast, Buster!

  Here's the run down:

  I ran the installation CD, connected to a USB port when told to find my SSID, entered my password, he did his thing and then he said that I had the wrong password.  Perhaps. Ok.  Tried again with the same results.    Connected on the router (gateway of Technicolor), checked the password.  Nope, it did ' t change.  Tried again, and this time, I hit the button troubleshooting when he told me that I had the wrong password.

  I followed the guide that he d/l would be after the presentation of the error report.  Run the test of wireless network from the buttons on the printer and it says "the WPA security password configured on your HP printer is not your wireless router setting."  I assure you, expensive printer, I have not.

  Jumped on the router page configuration when you are prompted by the guide troubleshooting and ensured that MAC filtering has been set to 'allow all' which, according to the manual of the router assures me, will allow all devices to connect.  Made sure that the 2 GHz range was alive and Kickin ' and that DHCP is enabled in the IPv4 & 6 tabs.  I even reset the router as the troubleshooting guide said.  Ran the test report yet, not logged in.  It is then the troubleshooting guide abandoned and directed me here.

  But then I noticed in the manual of the printer there is a WPS function available!  WPS!  It's must be!   Pressed the button wireless to the printer for 5 seconds to put in WPS mode, press the button on the router... not good.  I noticed that on top of one of the many reports of tests wireless network there is a WPS PIN which was good for 5 minutes.  Got a new a new wireless network test report, went into the router WPS customer PIN login page, entered it... no good.  I tried again with the page, open and ready to go, just in case I took longer than 5 minutes.  Still not good.

  So I thought I would at least give the option 'WiFiDirect' to try printing.  I printed the page "Use printer wireless without a router" by pressing the direct wireless for about 5 seconds, found the printer in the WiFI networks and entered the password to 8 digits when he asked for the WPA key.  I don't remember if he said it was the wrong key or what, but now it just says: unable to connect to the network.

  All the test reports diagnostic results show the wireless on and functional.  Connectivity has not been executed, the SSID was found with no other network corresponding to my network name, with 12 other networks detected.  The settings part was not run and Security (in bold and in italics as in the report) down (in the report) since, I guess, he thinks that I have the wrong password.  Who, once more, I assure you that I am not.

  So my question is basically this: now what?

  Well, I told you a hundred times... Gateway devices are terrible for connectivity and wireless performance.   My suggestion is for connect you to put this bridge in full bridge mode device and buy a router of high quality that you have full control over and you.   I gave everything but peripheral gateway troubleshooting.

• ADSL Wireless with my A30 714

  I have a Satellite A30 714 and have recently installed ADSL. How to use the Setup wireless on the laptop without having to plug into the ADSL?

  Hello

  If you want to connect your laptop to the internet using the Wi - Fi connection you need a wireless card on your device and a wireless router. I don't know, but as much as I know about satellite A30 there is no wireless card. The best solution is to use a PCMCIA wireless card. It's not expensive and it is very easy to configure.

• Want to 4500 Series: I still need to be able to recycle router/printer on my home network wireless daily

  Several devices were all printed on home wireless network, but often the message of the printer is offline. Scan doctor suggests power recycling the router/printer, which seems to work but which is very annoying when it happens every day. y at - it a fix for this problem

  These settings are to set up your wireless printer to stay connected to your router, wireless devices stay better connected and makes your router secure and hack proof.

  While the DHCP is convenient, devices like printers must always be assigned an IP (fixed) manually to avoid conflicts on your wireless network.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here (Windows solution 4, static IP).
  2. Or check in the printer that ' Auto Off/sleep/power saving mode ' is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check the properties of your printers.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. If necessary and you have assigned a static IP address, try using auxiliary for the preferred DNS Server 8.8.8.8 and 8.8.4.4 as DNS server.
  5. Wireless printers work on the band Wireless 2.4 Ghz not the band 5.0 Ghz.
  6. Make sure the printer is on the latest firmware by checking with the HP support site.
  7. Check all devices wireless in your home for interference. Check microwave, babyphones, phones, wireless and wireless alarm systems are a big culprit.  Any of these will knock at your printer wireless intermittently.
  8. Make sure that your printer and router are at least 5 feet independently of each other.

  In the router: (refer to the manual of your router for more information)

  1. Use a fixed wireless channel as the 1, 6 or 11, never 'auto', try channel 1 first then the rest.
  2. Set the router to 20 Mhz only or 145Mbps router function.
  3. Always use WPA2-AES encryption (personal), but you can try the "mixed" mode
  4. Disable the WPS and never use it and disable the UPnP for the security of routers. No one can hijack your system now and help with wireless connectivity (if you want to know why, research on the web).
  5. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure the SSID is NOT identical, they must be different for all the bands, even for networks without comments.
  6. SSID broadcast should be enabled.
  7. Save all the settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.
  8. Marketing the printer and check that it reconnects to the router.

  Microsoft has announced an update of Windows for the detection of device address... mode devices .waking 'sleep'. Update your Windows 10.

  https://support.Microsoft.com/en-us/KB/3147458

  If you have Windows 7/8/8.1 discovery network is on or off?

  1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.
  2. Under home or work (current profile) / network discovery.
  3. Select "Turn on network discovery" and save the changes.

  Now the last thing to do once everything above has been tried and you still have the same problem, completely uninstall and delete the printer and its software.

  Use http://www.iobit.com/en/advanceduninstaller.php .  Use of the powerful scanner at the end to remove all registry entries.

  Now go back and reinstall the drivers and full software on the HP website.

  Last resort effort - if your printer has an Ethernet connection, suggest you to get some adapters line and convert your Ethernet wiring for your printer.

• Cannot connect to the home network wireless hp 6910

  I can connect anything either but my hp (compaq) 6910p to my network wireless home.  It will connect to the network unprotected to a neighbor, but not my own.

  Hello

  I suggest you follow the steps in this link to solve home network problems:

  http://support.Microsoft.com/kb/308007

  It will be useful.

• Need to connect to the home network wireless - Windows XP Pro - error with network password - needs to be 40bits or 104 bits...

  I have a new laptop at home which has windows xp sp 2 is installed.  I am trying to connect to my wireless network.
  I get the following error;
  The network password needs to be 40bits or 104bits depending on your network configuration.  This can be entered as 5 or 13 ascii or 26 hexadecimal characters.

  I gave my father a new laptop computer this fall and he gave me one that had given him his friend... I've never worked with XP Pro...

  We have several other phones on this account wireless at home.

  You try to login with the wrong encryption method and you have this implemented extremely secure wireless network.

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing. MS - MVP - Elephant Boy computers - don't panic!

• HP OfficeJet 6500 E710n: HP OfficeJet 6500 printer problem - connection to new Comcast Wireless Gateway E710n

  Use this printer (wireless) for a few years without problem connected to a Linksys 802.11n wireless router.  Connected to a desktop computer and two laptops.

  Comcast asked recently that I update my modem cable to a new wireless, which also serves as a 802.11n access point wireless router.  I installed the new point wireless very well and has been able to set up the printer on a wireless network. (IP, host name and Mac address doesn't appear on the thin printer).

  I reinstalled the printer drivers on each computer and everything worked very well last weekend.  This weekend, I went to turn the Scanner on the desktop (HP Pavilion, Windows 7, 64-bit) and it wouldn't work.  Then I reinstalled the device drivers and then there was no connection to the printer (many reboots the PC and printer at various times during the tests).  So I ran again the connection settings on the printer - and led wireless term.  (I was able to get the scan to the connection to the computer once on one of the laptops, never the office, then lost.  When I send to the printer, it goes into the queue, a very small number of bytes, cross (usually hear the printer starts) then there lost error "connection to a printer.  Oddly enough, a couple of times after canceling the print job in the queue, the printed test page actually printed a few minutes later...

  I tried to use HP Print & Scan Doctor - it was a complete waste of time.  To date, it has always died (do not connect not not the unit) and never been able to diagnose something.  I end up having to go to the Task Manager to kill him because he always hangs.

  Any thoughts?  I'm puzzled.

  Appreciate any help/ideas that someone can think.

  FYI - I have still no idea what the question is / was?

  Connected to the gateway wireless from Comcast to the old Linksys router and I went back to my old wireless network.  After you have reinstalled the printer drivers, re-connection of the printer to the old wireless network, re-start the printer and computers - I was (finally...) manages to get printing and scanning works again.

  What a waste of a morning/afternoon.

• Vista connection to WAG54G V3 wireless gateway

  I bought a new Toshiba Satellite L300/700 laptop under Vista Home Premium and cannot connect to my existing Linksys WAG54G Ver3 router via wireless (works great with wired ethernet). I tried turning off safe wireless on the router but still not the same error. The wireless network can be seen, but Vista claims that he gets no response when you try to connect. I have XP and Mac laptops, wireless connection everything is OK using WPA PSK security. I tried the new notebook on the 7401VGP wireless network a friend billion and it works very well. The laptop has a 802.11 wireless modem (bg) integrated Atheros. Any help much appreciated - Bob

  Hi, I like you suggested but no change, then did what I should have done in the first place - put to update my firmware of the router, and everything suddenly worked.  Thanks a lot for your reply anyway

• I can see PC 'A' on a home network wireless secure PC 'B' but unable to connect; path error

  On PC 'A' I see 'B' PC and connect normally.

  PC 'A' is under Vista Home Premium; 'B' PC is running Vista Home Premium 64.
  Both systems have all the Windows updates current.

  This problem occurred after a repair and a reinstall of the OS/OEM on PC 'B' disc image  I have studied many guides of troubleshooting and everything seems to be in order.  Name of the Working Group, sharing files, exploration of the network, etc. are all correctly.  Shared folder names and computer names follow rules.

  I tried with, on and outside of the firewall.   I also tried to disable the anti-virus protection on both computers.

  The PC normally inaccessible 'B' appear in the router admin utilities.  No, there is an IP address conflict.  The drivers for my PC 'B' wireless card and the router is up-to-date.

  I tried to reboot the computers and the router and the modem without effect.

  I also tried remove the 'B' network and setting up again from scratch.

  Wireless signal is very strong, and I have no problem with internet on two PCs.

  I get the error message is so common that it is very difficult to sort through research on the internet; almost all subjects deal with the problem between different OS.  Here is the error message.

  "Check the spelling of the name. Otherwise, there could be a problem with your network. To identify problems with your network, click on diagnose.

  More > error Code 0 x 0070035 the network path was not found. »

  I have exactly the same problem with a 'C' also running Vista home Premium netbook.  'B' is displayed in the network, but are not accessible.

  Here's something that might be a clue: in the network, the computer 'B' is empty in the column: "network location".

  Is someone can you please help me understand this?

  Hello

  1. you are running Norton 360 on your computer?

  If so, I suggest to turn off the Norton firewall or configure it to allow other computers to connect.

  Also I suggest you to check the following services and ensure that they are enabled:

  Client DHCP (Dynamic Host Configuration Protocol).

  b. (Domain Name System) DNS Client.

  c. Server,

  d. support TCP/IP Netbios (Transmission Control Protocol).

  PING each computer by its Internet Protocol (IP) address, and if successful, PING by name. You can get the IP address of a computer by opening a command prompt (DOS window) and type IPCONFIG, follow these steps:

  a. click "start".

  b. on the box, type "cmd".

  c. on "cmd", press enter

  d. window will appear, there type "IPCONFIG".

  I hope this helps.

• Home network wireless Bluetooth USB adapters

  I tried to set up a personal network between my 2 computers - a desktop and a laptop (the two compaq) using Bluetooth Wireless USB adapters to adapt, but it is a bit difficult in interaction
  between the two systems.

  The office is quite an old machine with Windows XP Professional running on it, while the laptop is just a little more than a year with Windows Vista Edition Home Premium on it.

  While I have on a few occasions (not at the time), in the past, could see the office, to see and open the files from the laptop, it's one different issue to the other. The office also in rare occasions identifies the laptop and see the folders/files (shared), but I can't click on a folder to open it. When I do, assuming that the 'Documents' folder is what I am trying to open, the result is:"\\COMPAQ-LAPTOP\Documents is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have the permission to access. Access denied. "

  Can you or anyone help me with this.

  Thank you.

  Hello

  Permission on Vista are configured in this way.

  Problems of permission and security with Vista/Win7, check the following settings.

  All the users who are allowed to share need to have an account on all computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users.

  Using the functionality of all saved the need to configure authorization for each of the established users, it does mean not all those who feel that they would like to connect.

  Users who do not have an account on the computer are not part of the Everyone group.

  If the LAN security is useless and users are not established, then move on the guest account provides the semi-open configuration.

  http://Windows.Microsoft.com/en-us/Windows7/turn-the-guest-account-on-or-off

  ---------------------

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  
  

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

• Y at - it a home network wireless Parental controls?

  Y at - it software that will put parental controls on my wireless network so that things including video game consoles will be protected from dangerous Web sites? I don't want to go out and buy a new router with the built-in parental controls if I have to. I used to use Home Network Defender but now I can't renew it because the product is not sold more.

  I tried OpenDNS, but there is nothing that will allow me to put my password to get around the block. It's really annoying.

  Thank you.

  Hello

  I suggest you use Windows 7 built in parental controls for wireless networks.

  Check out the links to learn more about parental control configuration.

  How to use parental controls in Windows

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• My laptop HP (Windows 7) does not find my HP printer when it is connected to the home network wireless.

  My printer is wired connected to a router on my home network.

  Other PC and laptop computers in my home network can use the wired printer wireless (WIFI).

  My laptop was working properly with the printer Wi - Fi and wireless.

  After a new image of Windows 7, including windows update, I can connect the printer cable but not wireless.

  All other devices on the network are no wireless connection, only the printer problem.

  HP diagnostic tools cannot be found (404 page errors).

  How can I solve this problem?

  (the printer is connected wired allways, this isn't home the laptop computer with wireless connection to the network)

  Although I do nothing it's working this morning!

  My problem is solved.

  Thank you all for help.

  Hiske

• Satellite A300 - 12K unable to connect to the ADSL wireless modem

  My Satellite A300 - 12K suddenly cannot connect to a dsl wireless modem... There are no changes made to the parameters of
  However it connects to a modem that is not encrypted.

  Any idea what the parameters might have changed?

  Hello

  Why you n t reset the modem and check the settings?
  Configure encryption of the modem settings and encryption settings of the WLan card.
  Check if you are using the right key and change it if necessary.

  Sorry but there is no magic answer for you question, we must check everything and if necessary you must reconfigure everything!