Home computer laptop running Vista requires user name, password, and domain name to connect to my home network?

Similar Questions

• After Startup Repair Vista requires user name and password that never existed.

  This PC has the power out (dell Desktop) new PS installed and start is caught in the loop and cannot start in safe mode either... all external connections taken off, but keyboard and still nothing.  Now when I try to startup repair it goes but completely then ask user name and PW.  It has never been so we're stuck with?

  Keeps asking to start in safe mode or repair... loop endlessly.  HELLLP!

  Hi Norba_1976,

  I suggest that you try hitting enter in the name of user and password screen and check if it goes through. If is not connected you then I suggest you to see the following sections which describes all the forgotten passwords.

  What to do if you forget your Windows password
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  Microsoft's strategy concerning lost or forgotten passwords
  http://support.Microsoft.com/kb/189126

• Computer laptop Windows Vista cannot connect to shares on my Windows 7 desktop. It requires a username and password, but it does not work.

  original title: Vista to Win 7 networking issue.

  I have a Vista laptop that I am trying to use with a desktop running Windows 7.  I try to use the file and printer sharing.  I have no problem with internet connections through my U-Verse gateway.  I am also capable of sharing files from the Windows 7 Desktop, but when I try to access the Windows 7 laptop computer it askes for a user name and password.  I passed to the page Advanced Networking two computers and confirmed that the network discovery, file sharing, public folder sharing, and printer sharing are all 'ON '.  Protected by password sharing is 'OFF '.

  The problem seems to come and go.  Sometimes I can get it to work, was not.  Sometimes, it works once but not a few hours later even though computers have not changed or been restarted.

  A note more than I also use an XP laptop on the same network, and it connects more reliably.

  Any help is appreciated!  It drives me crazy.

  Charlie

  When I just opened the page to display the status of 'group', the system started working.  I have not made no other changes but Vista laptop now recognizes the Office!

• When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• My office uses Windows 7 and my computer is running Vista 64 bit. My home computer can work with my office from a USB files?

  original title: office / Home compatibility

  My office uses Windows 7 and my computer is running Vista 64 bit.  My home computer can work with my office from a USB files?

  The game, August 5, 2010 15:24:35 + 0000, JerryPMP wrote:

  My office uses Windows 7 and my computer is running Vista 64 bit.  My home computer can work with my office from a USB files?

  Yes. There is no problem with their two different versions of
  Windows. The files contain not what anyone who still marks that
  Windows version they were created under.

  But there is a potential problem. If the files have been created with a
  another version of Office that you have, you may have
  Difficulty reading the. For example, Word 2007 and 2010 creates .docx
  files by default (unless you tell her save as .doc) and if you
  an earlier version of Word, you will not be able to open a .docx file
  unless you install the compatibility pack to
  http://Office.Microsoft.com/en-us/Word-help/open-a-Word-2007-document-in-an-earlier-version-of-Word-HA010044473.aspx

  or http://tinyurl.com/29f5scy

  Ken Blake

• Photo disc does not open on my laptop under XP, but open on another computer laptop runnig Vista

  I am running XP Home Edition SP3 and just received my photo of my football photos drive two sons. The photos are burned on a DVD-R. This disc opens on another laptop running Vista but not on my own XP parents. I can open any other CD, DVD, CD - R, CD + R, DVD - Rr, DVD + R, but not this one. It gives me just this error message; Windows cannot read this disk. The disc's might be corrupted or it could be in a form that is not compatible with windows. I know that this disk is not corrupted, because I have it open on his laptop, but not on a XP computer. Thanks for any help!

  Any help out there?

  ==========================================
  I wonder if it is possible that the creator of the DVD
  doesn't not close or finalize the DVD? See the following topics
  Article:

  Windows Vista-
  Close or finalize a CD or DVDhttp://windows.microsoft.com/en-us/windows-vista/Close-or-finalize-a-CD-or-DVD John Inzer - MS - MVP - Digital Media Experience

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I bought Acrobat Pro DC, but it won't be in place because my computer is running Vista.

  I bought Acrobat Pro DC, but it won't be in place because my computer is running Vista.  What should I do now?

  Hi Jack,

  I can understand your concern, but Acrobat Pro DC is not compatible with Windows Vista.

  Please check the system requirements in this KB doc. system requirements | Adobe Acrobat Pro DC, Adobe Acrobat Standard DC & if possible then please upgrade your operating system, or you can download Acrobat Pro DC on any compatible system & serialize using your Adobe ID

  In the case where if you encounter a problem or have any other questions please let us know. We will be happy to help you.

  Kind regards

  Nicos

• Admin Console - requires that the user Admin password and user name valid

  I am running FMIS4.5 on CentOS5.5

  FMIS runs and I can connect via Flash Media Encoder.

  Displays and Web administration console: 1111 gives the xml output, however

  During the use of the user and the password in my xml files to connect (tests with ping), I get the error "user Admin password and valid user name required.

  conf/FMS.ini:

  ###########################################################################

  # fms.ini contains alternative to Flash Media Server variables #.

  # the configuration files. Lines beginning with ' # ' are considered comments.  #

  # A variable substitution is in the form < name > = < value >. All the way to #.

  # the first '=' is considered the substitution variable name and #.

  # everything after the first '=' is considered the substitution value. If #.

  # you want a substitution variable to have beginning or trailing spaces.

  # include double quotes around the value. For example, foo ="bar" #"

  ###########################################################################

  ###############################################################

  # This section contains configurable settings in the Server.xml file #.

  ###############################################################

  # Username admin server

  # For example:

  # SERVER. ADMIN_USERNAME = foo

  #

  SERVER. ADMIN_USERNAME = Admin

  SERVER. $admin_password = str34m1ng

  # Port and Flash Media Admin Server IP address must listen to

  # For example:

  # SERVER. ADMINSERVER_HOSTPORT =: 1111

  #

  SERVER. ADMINSERVER_HOSTPORT =: 1111

  # User Id in which to run the process (Linux only)

  # For example:

  # SERVER. PROCESS_UID = 500

  #

  SERVER. PROCESS_UID = 500

  # GID in which to run the process (Linux only)

  # For example:

  # SERVER. PROCESS_GID = 500

  #

  SERVER. PROCESS_GID = 500

  # Key license for Flash Media Server

  # For example:

  # SERVER. LICENSEINFO = XXXX-XXXX-XXXX-XXXX-XXXX-XXXX

  #

  SERVER. LICENSEINFO = #SORRY YOU DON'T GET TO SEE THIS #.

  # LIVE_DIR is the full path of the sample application 'Live '.

  folder # to store any live streams recorded by the server.

  # For example:

  # LIVE_DIR = \applications\live < FMS_Installation_Dir >

  #

  LIVE_DIR = / opt/adobe/fms/applications/live

  # VOD_COMMON_DIR is the full path to the sample application "VOD".

  folder # to the storage on demand and progressive download of fichiers.flv/.mp3.

  # File stored in this folder can be listened to and are also available PD.

  # Note: If you use the installation default Apache as a Web server.

  # If you change VOD_COMMON_DIR and please change the document root

  # in the httpd.conf file accordingly.

  # For example:

  # VOD_COMMON_DIR = \webroot\vod < FMS_Installation_Dir >

  #

  VOD_COMMON_DIR = / opt/adobe/fms/webroot/vod

  # VOD_DIR is the full path to the sample application "VOD".

  folder # to store only the fichiers.flv/.mp3 on request. Files stored in

  # This file are not PD-able

  # For example:

  # VOD_DIR = \applications\vod\media < FMS_Installation_Dir >

  #

  VOD_DIR = / opt/adobe/fms/applications/vod/media

  # The maximum size of the FLV cache, in megabytes.

  # The default is 500 MB.

  #

  SERVER. FLVCACHE_MAXSIZE = 500

  # To start and stop the server HTTP included throughout

  # with FMS.

  #

  SERVER. HTTPD_ENABLED = true

  ################################################################

  # This section contains configurable settings in Adaptor.xml #.

  ################################################################

  # Application to the virtual host directory

  # For example:

  # VIRTUAL SERVER. APPSDIR = C:\myapps

  #

  VHOST. APPSDIR = / opt/adobe/fms/applications

  VHOST. ALLOW all =

  ####################################################################

  # This section contains configurable settings Application.xml #.

  ####################################################################

  # List of semicolon delimited paths of research for loading script

  # For example:

  # APP. JS_SCRIPTLIBPATH = C:\scripts; C:\Program Files\Foo\scripts

  #

  APP. JS_SCRIPTLIBPATH = / opt/adobe/fms/scriptlib

  ###############################################################

  # This section contains configurable settings in Logger.xml #.

  ###############################################################

  RECORDER. LOGDIR =

  ####################################################################

  # This section contains configurable settings in Users.xml #.

  ####################################################################

  # Enable or disable using HTTP requests to run admin commands.

  # The value "true" to enable, otherwise it will be disabled.  The

  actual orders # allowed for the server admin and admin of the virtual host

  # users can be defined in Users.xml.

  USERS. HTTPCOMMAND_ALLOW = true

  Users.XML:

  < root >

  < UserList >

  <!-this tag defines a server administrator. ->

  < username = ' ${SERVER.» ADMIN_USERNAME} ">"

  <!-salted Hash of the password for the administrator of the virtual server. ->

  < password encrypt = "false" >$ {SERVER. $admin_password} < / password >

  <!-this administration cannot connect to the server of the-> specified

  <!-hosts. This is specified as a comma-delimited list.

  <!-host names or domain names and/or (full or partial) IP->

  <!-addresses. For example,-->

  <!-"foo.yourcompany.com, macromedia.com, 10.60.1.133, 10.60" - >

  <>allow all < / allow >

  <!-this admin is unable to connect to the server from all the...

  <!-specified hosts. This is specified as a list by commas->

  <!-the name of host or domain names and/or IP (full or partial) - >

  <!-addresses. For example,-->

  <!-"foo.yourcompany.com, macromedia.com, 10.60.1.133, 10.60" - >

  < deny > < / nie >

  <!-specifies the order in which evaluate < Allow > and ->

  <!-< Deny > tags. This can be 'Allow, Deny' or 'Deny, Allow '. The - >

  <! - default is 'Deny, Allow', which means that access is allowed - >

  <!-unless specified in < Deny > < Allow > and not.     ->

  < order > allow, deny < / order >

  < / user >

  < user name "janedoe" = >

  < password encrypt = "false" > S4mpl3P4ss < / password >

  allow <>< / allow >

  < deny > < / nie >

  < order > allow, deny < / order >

  < / user >

  < / UserList >

  < AdminServer >

  < HTTPCommands >

  <!-turn on or off using HTTP requests to run admin commands.     ->

  <!-set "true" to enable, otherwise it will be disabled.  The - >

  <! - actual orders allowed for server admin and admin of the virtual host - >

  <!-users can be defined in allow it and deny elements.                                   $

  < activated >$ {USERS. HTTPCOMMAND_ALLOW} < / activate >

  <!-list orders admin server accessible through HTTP.         ->

  <!-add several commands separated by commas.  'All' indicates->

  <!-all orders (it is not recommended to allow orders).          ->

  <!-Separate multiple commands with commas.                              ->

  Ping < Allow > < / allow >

  <!-list of orders admin server refused access via HTTP.                ->

  <!-add several commands separated by commas.  'All' indicates->

  <!-all orders.                                                       ->

  < deny > all < / deny >

  <!-processing order for refuse and allow command lists.  'Deny, allow' - >

  <!--means that the command will be permitted if the order is allow-->

  <!-list or not in the deny list.   'Allow, Deny' means the--> command-line

  <!-will be allowed if it is in the allow list and not in the - >

  <!-list of deny.                                                           ->

  < order > deny, allow < / order >

  < / HTTPCommands >

  < / AdminServer >

  < / root >

  Exit the: admin/1111/ping? auser = Admin & apswd = str34m1ng:

  < result >

  errorof the < level > < / level >

  < code > NetConnection.Connect.Rejected < code >

  < description > Admin user requires valid user name and password. < / description >

  < timestamp > Thursday, May 17, 2012 11:33:43 AM EDT < / timestamp >

  < / result >

  Links do not work for localhost and external connections and the fms_adminConsole.htm (.swf) fails as well.

  Any help is appreciated!

  Hey Jon,

  Please take a look at this. Should help.

  http://forums.Adobe.com/message/4346847#4346847

  Thank you.

• It's a HP Compaq 6710 b computer laptop running windows XP compatible with a Windows 7 upgrade?

  Windows 7 upgrade

  It's a HP Compaq 6710 b computer laptop running windows XP compatible with a Windows 7 upgrade?

  This should answer your question
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  I hope this helps.

• Opening windows mail requires user name and password every time?

  Windows Mail requires user name and password every time that we open ourselves to it.  All the settings are correct.  What can we do to solve this problem :)   Thanks in advance.

  Windows Mail requires user name and password every time that we open ourselves to it.  All the settings are correct.  What can we do to solve this problem :)   Thanks in advance.

  1. temporarily disable your antivirus software. See if the problem stops.
  2. your account could be damaged. Delete the account. Re-set up your account.

  t-4-2

• Get on my wireless network - I'm in the prompt for the user name, password, and domain

  I tried to connect to my home wireless network. with most wireless networks, I will ask you for a password and I can enter and connect, but my home network wonder with additional credentials, including username, password and domain. My home network does not work with all other computers that are used in my house. What can I do to connect?

  Hello

  1. try relative to wireless networking and make sure that you set the level of security to WPA2-Personal, as it is recommended. Follow the steps listed in the link below and check if that helps:http://windows.microsoft.com/en-us/windows7/Setting-up-a-wireless-network

  2 disable the software firewall and windows AntiVirus installed on your computer and then try to connect to the wireless network. Make sure that you turn on once connected to the network.

  3. you can also try the steps listed in the link below:http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-network-connection-problems (for Windows 7)

  4. run the built-in network troubleshooting utility, follow the steps listed in the below link for the same thing: using the utility in Windows 7 Network Troubleshooter:http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get the user name of the current user? Not the name of the user, but the user name is connected to.

  Anyone know how I can get the username of the current user? Not the name of the user, but the user name is connected to.

  Thank you!

  Only two variables that Captivate allows to work with are cpQuizInfoStudentName and cpQuizInfoStudentID, but the latter is only really designed to be used for the internal information server, not a typical SCORM LMS solution.

  Sounds to me like you may need to get hands on with the services of a JavaScript programmer.

• Impossible to get a laptop running Vista SP2 on a wireless home network to recognize your desktop running Windows 7.

  Try to share files.  OIOS sees files shared of the laptop, but the laptop cannot see the office.  Have following settings 'walk' on two PCs... network discovery, file sharing, public folder sharing, and media.
  Password protected sharing is 'off' in both computers.  Printer sharing is disabled on laptop computer (not connected printers)... any help?

  Here are the procedures for Vista with Windows7 network layout that can help:http://www.windowsnetworking.com/articles_tutorials/Windows-7-Understanding-Network-Administration-Configuration.html.

  Here is another article on home networks (with several links to related articles which must all be considered - as well as others, you will find in the related articles) to help you better understand the home networks: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.  If it's for Vista, much of it applies to Windows7 (although there may be some differences that should be addressed in the previous article).

  Here is an article on the networking of the different versions of Windows:http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows.

  I hope this helps. If necessary, start from scratch using these procedures and see if that helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista suddenly requires user name and password for peer network XP, WHY?

  Network is a mixture of XP Pro with Vista Home machine. Vista had been particularly transparent connection to a peer network XP, but suddenly invites to indicate the user name and password to login. Only the user for this XP is 'Admin', but login is not necessary. Why is Vista promting to connect? All attempts to answer fast connection with the good username and password fails. Why? How can I make Vista not prompt connection again?

  Try here:

  Vista - XP and Vista Peer to Peer
  http://www.Vistax64.com/Vista-Networking-sharing/126779-XP-Vista-peer-peer.html