Home network works great, remote desktop will not connect.

Similar Questions

• Network of shortcuts on the desktop will not connect to documents

  I have shortcuts on my Vista desktop to the word "Networking" & excel files that I use all the time.  When I click on the shortcut, my computer says that the file is not found.  If I go through 'my computer' to connect to the file, everything is fine.  This problem is also the problem that I posted on another forum with no response yet:

  Running Vista Business & Office 2007 on a Server 2003 domain.  When I access a 'network' (in Word or Excel) file, and then close the file, I'm unable to re - open the file... I get the message ' document is currently in use, try again later ".  Also, if I open a file, make changes and try to save it under the same name, I get the same message.  I have this problem until last Monday... like a switch has been turned upside down or something.  Any ideas?  I am connected to my workstation which is located in an area (I'm not directly connected to the domain).   This configuration running on all my machines Vista and do not have the problem on a different workstation.  Also the Quickbooks will not open the file of our networked society, workstation does not recognize the network as a QB file file.  Can someone HELP me with this.  My workstation, at this point, is essentially worthless.  I am unable to work on any network files.

  Hello cwil0710,

  Thank you for using the Microsoft Answers forum.  What antivirus do you use?  I suggest not including mapped drive in your virus scanner settings.  Did you install any software or update straight from the software before you start the meeting this problem?

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Remote Desktop is not connecting

  I am trying to connect to a computer on my home network running W7 Professional using DRC. It is the only station that does not accept the connection. All are part of a domain. Is there a domain server. Symantic End Point Protection a firewall (firewall W7 is therefore off). My connection to the DRC is triggered by a W7 Ultimate station within the domain and specifies a port [STATION02:3390]. The router sends port 3390 to this post, and I get a good test of the router for this port. DRC is switched on to STATION02. I tried with and without network authentication. I tried to disable Ms. My domain name is called at the HOUSE and I entered my user name as an authorized user of the DRC on the host: HOME\richard and HOME\Domain users. All other computers on the network can RDC to each other, except STATION02 does not login as a host. I am stumpted and would appreciate help. Is there an area of setting I'm missing? Thank you.

  Hello

  Your Windows is better suited for the IT Pro TechNet public. Please post your question in the Remote Desktop Services forum.

  You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

• Remote Desktop does not connect Win 7 on Win XP pro.

  The two turned on, remote active and available on the same network. I tried to connect by the name and Ip address, but I still get the error message. Remote Desktop cannot connect to one of these reasons: 1 remote control, access to the server is not activated 2 remote computer is disabled 3 remote computer is not available on the network.   I have connected before. In fact, I went to my computer in a click with the right button on the computer in the access network, it could not connect. He gave me the opportunity to diagnose the problem, so I chose it. The result of the diagnosis was the computer appears to be correctly configured but (computer) does not. I recently, during the last week, the object a new copy of windows xp pro on the computer and I have connected with access to distance since.  Why can't connect now?

  Check your firewall and router, the remote desktop protocol uses port 3389, this port must be opened.

  John

• Skype desktop will not connect

  The application was working fine yesterday and when I went to turn on my computer and load the program, it does not connect after I try to open a session, there is nothing wrong with my computer, or other programs, it's just Skype works do not, I uninstalled the program several times and reinstalled it and its still does not. I'm not sure how he's going to leave one day being fine to the next does not... suggestions?

  http://heartbeat.Skype.com/2016/10/skype_connection_issue.html

• Remote Desktop will not work on wifi?

  When I connect to my computer via wifi it disconnects from the network the minute I connect remote is there a way to prevent this, so I can access my computer remotely? I tried to goto Device Manager and uncheck the "Allow computer to turn off this device to save power", but this still does not work I tried to google this problem but I can't find anything that will help me... I have windows 7 x 64 ultimate wireless card I have is built in its an Intel PRO/Wireless 3945ABG if anyone can help that would be great thank you feel free to ask me more questions on My problem. Thank you

  Hello

  I had the problem at home (in my home LAN), but when I try to connect to the Office at home as well.

  The problem is in the Wifi connection of the laptop which I wanted to open a session.

• HP 7520: HP 7520 will not connect to the wireless network

  There is some additional information to

  http://forums.Xfinity.com/T5/home-networking-router-WiFi/HP-7520-will-not-connect-to-wireless-networ...

  on this issue.

  Have several APs for a single wireless network allows the printer foolish law.  (Not a Repeater, a second AP connected to the local network with the same configuration of network for security, etc.).

  I solved this problem.  In accordance with the discussion on the link, the problem is that the printer cannot connect to a wireless network if there is greater than 1 for a wireless network (SSID) name wireless access point.

  This thread has had several useful suggestions, but what finally solved the problem, it's the second point has access to a mode where I can create a 'virtual' access point and, above all, a SSID associated.

  Note that not all access points or routers support virtual APs, but this function seems to be more common over time.  Older models is not able to do that.  However, a new access point is sometimes cheaper than a new printer.

  If you do not understand the jargon in the procedure below, I recommend that you find someone who does, then they can do it for you.

  Solution:

  1. On one of the wireless access on the network, create an a new virtual AP with a slightly different name SSID (for example < name of the network - > _1), on the same VLAN (usually VLAN 1).  You may need to put the AP in "multiple AP mode" or something similar, and then restart the AP.  All other settings (DHCP, security, mixed mode b/g/n, etc.) must be the same for the new SSID.
  2. Run the printer Wireless Setup and connect it to this new SSID
  3. Confirm that the printer can be seen by other devices on the network

  Tips:

  • Check the security is the same as the original SSID, Alternatively you can create a vector of insecurity in your network.  Do not WEP-128 when the other SSID uses WPA2 AES, for example.
  • The AP I had had several resets to make it work because of the mode and parameter changes.
  • If you connect the SSID but cannot connect to or be seen by anything on your network, check the new SSID/AP is in the same VLAN as the original.
  • Because the printer is not roaming, and the speed is not a problem for me, I used the access point that could support this solution, which is deeper and slower than my primary AP.  I have not noticed any problems.

  The printer has been reliable on the wireless now on the new SSID, 48 hours.

  I have not upgraded any software on a client of the printer (PC, Mac, phones).

  I think that it is a positive confirmation that the problem is with the implementation of the printer of the stack of network and not with the driver or client software on remote devices.  The 802.11 protocols provide for a network name (SSID) wireless with several access points using different MAC addresses.  I suggest this HP look into this as a potential bug with their network printer for the 7520 protocols stack.

• my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

  connection network card

  my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• My Ipad mini will not connect with my wifi at home.  Other devices are able to connect with wifi.  I repeatedly entered the wifi password, but this is not ACCEP it.  Worked very well.  I turned the mini ipad market and nothing.  Help!

  My Ipad mini will not connect with my wifi at home.  Other devices are connecting with the wifi at home.  I turned the mini ipad market a few times and nothing. He recognizes wifi but when I touch the password, it continues to request the password.  Help!  It was working fine earlier in the day.

  What has happened with your iPad since earlier today, when it worked? updated App or iOS? nothing at all

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

• I have a Windows 7 station on a local network that I am able to remote desktop, but not able to remote desktop for it?

  I have a Windows 7 station on a local network that I am able to remote desktop, but not able to remote desktop for it?

  Hello

  Thanks for the reply.

  I suggest you to refer to this article and check.

  Connect to another computer using Remote Desktop connection: http://windows.microsoft.com/en-IN/windows7/Connect-to-another-computer-using-Remote-Desktop-Connection

  Thank you.

• Problems with the work computer remote desktop connection

  I used the remote desktop for VPN connections to work for a few years.  My new employer has a Sonic Wall VPN.  My home PC is running XP.  The work computer is Windows 7.  I activated the remote on this computer connectivity.  I can connect to the VPN with a number.  Remote Desktop detects the computer to work without problems as well.  When I try to signon with my valid credentials, I get a message that my ID or password is invalid.  By using the same credentials locally everything works perfectly.  I tried to connect with my user disconnected and connected in the workplace with no difference in results.  Any thoughts there?

  Hi DougH_50,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• WIFI on my C850 Satellite can detect the network but will not connect

  I just bought a satellite C850 - PSKCCA-02D00M

  The connection to the LAN works fine however the Realtek RTL8723AE without wireless/Bluetooth will not connect to the network. It can can detect them just does not connect. I used the troubleshooting, and he cannot sort.

  All other devices connect very well as Iphones and Kindle

  In the config is doctor says that the adapter is enabled in a domain and in the adapter another status is down.

  I took back to the initial power and installing and unistalling and reinstalling the adapter using the driver on the website.

  Any help is welcome. I don't want to have to take back just for this issue

  See you soon

  Your WLAN is locked? Can you connect WIFI if you delete the WIFI password for two minutes?
  Have you tried to reboot your router?

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• Windows 7 Home version has the remote desktop service

  Windows 7 Home version has the remote desktop service

  Windows 7 Home version is not Office remotely.

  For more details, please see:
  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  Eric Cross
  Microsoft MVP (Windows desktop experience)
  http://MVP.support.Microsoft.com

• I just bought a Windows 7 Edition upgrade Home Premium to professional, but it will not install and told me to get a dfferent key.

  I just bought a Windows 7 Edition upgrade Home Premium to professional, but it will not install and told me to get a dfferent key.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade