Home to the host windows group Group 8 Windows 7 not connecting not even with the help of the troubleshooter.

Similar Questions

• Restart Windows loop not fixed with current help topics

  Hello

  My laptop installed a new update of vista today and since then has been in a continuous restart loop where it is blocked to "configuration step 3 of 3 0%, do not turn off computer. I read other messages that encounter, I tried to create a recovery disk and use it to restore, but when I go to repair screen it tells me that I have no system restore points (although I regularly SR regular points?), and fix the drive did not help. Safe mode does not help, as something new that I have not read in any positions. Just before, he goes to configuring updates screen, black screen with text at the top flashes twice, the text is "2/831 mrxsmb.sys.

  some system info:

  I bought about 2 years ago.

  Laptop Dell XPS 1530

  with VISTA home premium

  Furthur update:

  I managed to get into windows, finally.

  I went into c:windows\winsxs\ in the commandprompt

  and then delete = pending.xml file.

  After that windows started. I always intend to try to run chkdsk and sfc and look in the cancellation of this automatic update, thank you for the help.

• Windows does not start with the second internal HDD connected

  Hi all, I recently got around a few major problems with a new buuild, but I found another issue. Windows does not start with my connected storage disk.

  hard drive 500 GB of important data that I can't save on it and need access. It is a hitachi drive, which works fine on other systems but usually works in this one. any suggestions are appreciated, thanks in advance

  fixed the problem of swapping of sata ports and reconnect the cables, thanks for the advice but

• KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV

  KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.

  Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:

  -AMD/Radeon APU

  -Windows 8 6.2.9200

  -See sysinfo below for more details

  The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update.  With the exception of troubleshooting the failure of the update, none of the changes have been made.  The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.

  Additional troubleshooting measures to date include:

  -Uninstall the software OEM AV (Norton), then by restarting.

  -Temporarily disable all the features of Windows Defender.

  -Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.

  -Realization of an analysis of the SFC system (with no error found).

  Results: The Windows Update full KB2887069 with a failed State and produced the following results.

  2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
  identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
  the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
  2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
  2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
  2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
  2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
  2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
  2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
  2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
  2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
  2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
  2014-11-15 19:35:19:795 880 1-28 Service *.
  2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
  2014-11-15 19:35:19:795 880 1-28 Service *.

  I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...

  ACTIONS

  [You may want to print these instructions for reference offline.  IMPORTANT => NO SKIP & perform all steps in one uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]

  4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).

  Note-online scripts are good for IE9, IE10 & IE11, too,

  5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.

  5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.

  6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737

  Note => for best results, check the option Remove personal settings .

  7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

  8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.

  9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.

  • Upgrade to Win8.1: FAQ
    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
  • The upgrade to Win8.1 tutorial
  
  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
• What's new in Win8.1?
  http://Windows.Microsoft.com/en-us/Windows-8/whats-new

10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.

11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.

Good luck!

===========================================================
[1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl

[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• Windows does not update with error code 8024402C

  Windows does not update with error code 8024402C

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  0x8024402C error code when you try to install updates on Web Windows Update or Microsoft Update sites:
  http://support.Microsoft.com/kb/900936

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have a Toshiba Satellite A85 with XP Home Edition series. Windows does not start. At startup I get Toshiba logo then a black screenwith cursor upper left. Can I save it?

  Toshiba Satellite A85 Celeron with XP Home edition. Windows does not start. I have Toshiba logo screen, then it turns into a black screen with the upper left corner of the cursor. I have the recovery disk. Is it possible to record HD without re-formatting and losing all data?

  Thank you;

  Lobo77

  If you run the Toshiba recovery application, you will lose all your data.  As indicated in the warning, this application will restore the computer back to wherever it was when it was first delivered by the factory.

  Without other complementary diagnostic information, it is difficult to determine what is happening.  Pressing the key (do not hold) of F8 beginning immediately after that the sequence of power should bring you to the Advanced Boot Options menu.  Try again then press repeatedly the key rather than pressing on and now.

  The recovery CD Toshiba, you have probably does not allow a "repair installation".  Contact Toshiba to see if they will provide you with a suitable CD.

  Given the fact that you can get a useful place when you start with the Toshiba Recovery DVD, my guess is that the computer is OK but that the hard drive has failed - or maybe more likely - the startup information is damaged so that it does not start.  If you have access to a computer equipped with a burner, download and create a bootable Windows CD.

  There are a number of available bootable CD which include various recovery and diagnostic tools.  You'll have to do some research to find out how to use the tools.

  Ultimate Boot CD 4 Windows
  Ultimate Boot CD
  Hiren BootCD

  If you feel overwhelmed by the tools and I just want back the data, and then use the Toshiba Recovery DVD, make you a Knoppix CD and use this key to your data, preferably on a network connection.

  If all this sounds like too much for you - and there is no shame in admitting that--take the laptop for a good local computer repair shop (not a type BigBoxStoreUSA or rather GeekSquad) and ask them to check it out and make sure to recover your data before anything else.

• After that repair of Windows 7 Home Premium, copy of Windows is not genuine windows 7 Home premium.

  Please HELP! I bought an authentic copy of Home premium 7 in August. I registered and activated and everything was fine. However, after you install a new graphics card and like a fool for download a registery fix any computer tool was playing slow, etc, so as other versions of windows I've owned, I thought that I would be overlay/repair the disk. But now I get messages saying that I am a victim of counterfeiting, that my copy of windows is not genuine etc. etc.. It is really authentic and as I said I have activated in August on this same machine. I tried ringing phone numbers, but they are automated. Any help please,.

  License status: Notification
  Reason for the notification: 0xC004F009 (grace period expired).

  You must activate by phone:

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your question clearly to the support person.

• "Home" button doesn't work is not even with the support contact

  H

  Hello to you all.

  I seem to have a problem with my iPhone 5 now. Notifications are not appearing (stills phone vibrate, silent or not), siro does not work (but again, vibration works as if everything was fine.) and by simple click home button does not work, both manually and with a help key. Double-click on works fine, triple clicking too. I tried calibration "home" button but it does not work, and since he made double and triple click, I don't think it's broken. The thing is, even touch home on assistove does nothing. Please help me find a solution thanks!

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data by doing this, but it can cure a few glitches.

  If restarting the force cannot be done because the home button does not react, set it back to factory settings, explained in this article:

  Use iTunes to restore your device to factory settings - Support Apple iOS

• Tree view on the left of the Explorer of Windows 7 not synchronized with the file on the right.

  1. create a shortcut to a folder.
  2. click on the shortcut.
  3 explore opens with the contents of the folder in the right pane, but the tree left is not synchronized with the location on the right. You must navigate on the left tree to get to the location of the folder on the right side. In the XP folder as this is done automatically.

  The whole point (I thought) shortcuts to specific locations in the directory structure was to avoid having to navigate several lower levels from the root of a tree...

  Any way to configure the behavior of XP?

  Thank you.

  Hi Rptrevor,

  ·         How you used to synchronize folders in Windows Explorer?

  Follow the steps below to solve the problem:

  a. right click on an empty space in the left pane (folder), you get a menu with two options

  b. 'show all files' and 'Developing in the current folder'.

  c. believing that the empty space is a bit complicated and the options are sticky (it's the same thing than to go through the 'Folder Options' dialog box).

  I hope this helps.

• Windows 7 not compatible with the Epson Stylus Photo R380

  I have an Epson Stylus Photo R380 printer connected via USB to my Windows XP desk top.  I also have a laptop Windows 7, I want to share the printer.  I find that the drivers are not compatible.  Are there workarounds?   Thank you

  Windows 7 is not inconsistent with the Epson Stylus Photo R380 (if anything, it would be the other way around).  The link shows that it should 'work' with Windows 7.

  You may indeed need to connect the printer (directly) to the Windows 7 system once to get the appropriate drivers installed before trying to share your desktop Windows XP out to the other system on the network.  No guarantee it will work on the network like that - but I don't see why he wouldn't.

  Hardware support always comes from the manufacturer of the equipment, regardless of the operating system that you choose to run.  If a hardware manufacturer decides that they will not put the drivers for a device after a given operating system or even a service pack on an operating system - it is their prerogative.  It has nothing to do with the operating system, or those who made the operating system.

  You have 32-bit or 64-bit Windows 7?

  • drivers Windows 7 32-bit and Epson for your printer information.

    Printer driver v6.1aA
    Compatible Windows 7 32-bit, Windows Vista 32-bit
    Posted on 12/12/06 - 6.5 MB - epson12034.exe

  • drivers for Windows 7 64 bit and Epson for your printer information.

    Printer driver v6.1aA
    Compatible Windows 7 64-bit, Windows Vista 64-bit
    published 12/12/06 - 7.5 MB - epson12053.exe

  If all goes well a part of which will take you to where you need to be.  In the end, however, do not forget it is the hardware manufacturer who takes in charge (or not) your hardware (for all other devices that comes up for.)

• Client Windows Update not found with error 0x80072efe.

  After trying a few update solutions, still cannot update my Windows Vista Home premium.

  ----------------------------------------------------------------------------

  To THE: search updates [CallId = {99E90203-6E7E-48FF-B9F0-434086CD2147}]
  2010-06-11 09:00:12:727 1956 113 c to THE #.
  2010-06-11 09:00:12:729 1956 113 c to THE setting next detection timeout at 2010-06-11 12:00:12
  2010-06-11 09:00:12:729 1956 113 c time of installation to THE adjustment to THE planned at 2010-06-12 01:00
  2010-06-11 09:00:17:726 1956 d88 report REPORT EVENT: 09:00:12:725 2010-06-11 + 0200 1 148 101 {B0A8E80E-6F0D-4000-8775-D52B6B945499} {00000000-0000-0000-0000-000000000000} 0 80072efe AutomaticUpdates outage software to sync Windows Update Client did not detect with error 0x80072efe.
  2010-06-11 09:00:17:743 1956 d88 report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2010-06-11 09:00:17:743 1956 d88 WER sent report: 7.4.7600.226 0x80072efe 00000000-0000-0000-0000-000000000000 Scan 101 unmanaged
  2010-06-11 09:00:17:743 1956 d88 report CWERReporter finish event management. (00000000)

  I was able to update windows or windows defender and my sytem restore was kapput too :(

  solved the problem with Kaspersky tdss killer... found here: download and scan can heal everything what he finds.

  http://downloads.PHPNuke.org/en/download-item-view-m-g-n-m-z/Kaspersky%2BTDSSKILLER.htm

  Good luck!!

• Machines Windows does not start with 2 virtual disks different on 2 different

  Hello

  With the help of esx.3.5.0 update 3

  I have a problem where if I have a new VM to win 7 or Win 2008 r2 with or without vmtools.

  If I reboot it up to 10 times without having to install anything, whether he'll join the black windows loading screen, then restart and then restart and try to start in safe mode, it still does not start.  the machine rendering it useless.

  The single element only on these virtual machines is as follows.

  Windows machines have 2 different virtual disks 1 on a lun, VMFS (vmfs version 3.21 c:) and a RDM VMFS (d :))

  3 questions

  Is it a problem to have 2 different discs with 2 different stores file types?

  Would this questions we see above?

  Also, I thought that you might not? VMotion/clone? a virtual machine if she drives in 2 different places?

  I tested and I can vmotion live VM with records stored on 2 different LUN.

  Hello.

  With the help of esx.3.5.0 update 3

  I have a problem where if I have a new VM to win 7 or Win 2008 r2 with or without vmtools.

  If I reboot it up to 10 times without having to install anything, whether he'll join the black screen windows loading and then restart and then restart and try to start to > safe mode, it will not even start.  the machine rendering it useless.

  Windows 7 and 2008 R2 are not supported in this version.  5 update brings support for these two operating systems.  Go to U5, maybe it's the solution.

  3 questions

  Is it a problem to have 2 different discs with 2 different stores file types?

  Laughing out loud

  Would this questions we see above?

  It is unlikely.

  Also, I thought that you might not? VMotion/clone? a virtual machine if she drives in 2 different places?

  I tested and I can vmotion live VM with records stored on 2 different LUN.

  VMotion requires shared storage.  Local storage would be a problem if you tried to change hosts.

  also would it be a problem if 1 store was running 3.2.1 vmfs and other store runs 3.31 and a v on each disc is used for the VM 1?

  Lol this is explained in KB 1005325.

  Good luck!

• 10 Windows does not even recognize Stor.e Alu 2...

  I bought external HDD Stor.e Alu 2 750 GB before I went on Windows 10. Whenever I connect the HARD drive, the blue flashes, but it is nowhere! It's like not even connected! Anyone know what I can do about it? Thank you in advance.

  Hi Pokecelebi,

  You can try to connect to another system, or change your USB cable and try to connect to different ports. I have a few questions for you. Kindly answer as much as I'll help you also.

  What exactly happens before you had connected your external drive to your system?

  How old is your HARD drive?

  Please let know us your views on these issues.

• Windows 7 not comaptible with Adobe 11.0.09

  Windows 7 is not compatible with Adobe Reader 7. I now have Adobe Reader 11.0.09 and I still can't use my program Illumina animations. Help, please.

  I don't know whether or not, Adobe Reader 7 has worked with Windows 7, but considering that Adobe Reader 7 is released almost 5 years prior to Windows 7, I would not be surprised if he does not

  On the other hand, your subject line is not correct.  Adobe Reader 11.0.9 works very well with Windows 7.  If you have problems with some other software, you should consult the help of the editor of this software.

• validateforMosaic says 'BAND DIMENSION SIZES NOT EVEN' with all the 1 - Sun

  11 GR 1 material
  
  I have SDO_GEORASTER with
  1 pixel = 1 byte
  I can display them with Oracle GeoRasterViewer correctly.
  
  On validation the front to create a mosaic, oracle says: "BAND DIMENSION SIZES NOT EVEN."
  
  I also SDO_GEORASTER with
  1 pixel = 3 bytes
  I can create a mosaic of them without error.
  
  On the use
  sdo_geor.getBandDimSize (...)
  I see that all THE "1 pixel = 1 byte' georaster have exactly 1 dimension. So the message "BAND DIMENSION SIZES NOT EVEN" seems not to be accurate.
  
  sdo_geor. Mosaic (... does not, ora-13419 "can not... Please check the documentation...")

  Could you please help do a few checks most common sense:

  -need to ensure that all frames are valid for the sense of validateForMosaic
  Select count (*) in georaster_table
  where sdo_geor.validateGeoRaster (georaster)! = 'TRUE' and
  sdo_geor.validateGeoRaster (georaster)! = 'NULL ';

  Select count (*) from (select georid, sdo_geor.getBandDimSize (georaster) numberOfBands
  of georaster_table t
  where sdo_geor.getBandDimSize (georaster)! = 1) ;
  /

  Thank you
  Jeffrey