Horizontal line going through random pages printed by LaserJet P1102w
From time to time, I see my P1102w print pages with a small horizontal stripe. This happens only on a single page (not the one just before or just after). I looked in the manual and don't see in the troubleshooting section.
I doubt that there is toner low, such that it has less than 1000 pages are printed on the current toner.
Any suggestions?
HP LaserJet p1102w
Nothing on this page that you linked to, adapted to my problem.
I just changed a new toner, and after 75 pages or more, I have yet to see this horizontal line randomly. It was printing on pages 5 to 8 or more, then it is a fairly representative sample.
It is strange, however, assuming that it is the toner. I got about 1000 pages out of it, maybe less, but it is a bit disappointing. I put in when I am done with this new toner, just to get my money, but still...
Tags: HP Printers
Similar Questions
-
Where is the total number of pages printed on Laserjet P2055DN?
Hello
We recently bought a P2055dn LJ, which works very well. We are now on the second ink cartridge.
I would like to know how many pages was printed completely. If I go to the page /hp/device/supply_status.htm I can see how many pages have been printed using the LAST cartridge. How can I see the total number of pages printed?
Thanks for the good help on that.
Calle2012
At the front of the printer, you will need access the MENU via the LCD screen. Scroll to REPORTS and click ok, then scroll down to the configuration page and click ok. At this point, it should display a page of test/config auto with detailed info printer including the number of pages since its installation. -
Cannot turn off Double-sided printing on LaserJet P1102w!
So I just installed this LaserJet P1102w and I absolutely cannot understand how to disable two-sided printing. It's really annoying because even when I try to print only a one page document he sucks a blank page, does not print anything on it and then told me to return the document to print the other side of this one. Sometimes it prints also a Hewlett-Packard test page or something that wastes the toner. I have gone through with a fine tooth comb printing preferences and cannot find a way to turn it off. There is nothing in the user guide on how to disable it. Scan doctor said there is nothing wrong with the printer. I tried to download some sort of aid to this site and is not compatible with this operating system I guess. I've lost hours trying to figure this out and there is no way to call and speak to a human, I guess. I want it out. Can someone please help me and tell me how to disable? It's wasting toner, my time and it's extremely frustrating. Thanks in advance for any help.
Check that the Mode of Duplex in device settings setting in properties P1102w is OFF.
-
LaserJet P1102w: two side printing on Laserjet P1102w
Hello
I can't print on both sides for Laserjet P1102w with my Mac, I followed all instruction on HP user manual on page 23, on the '7' clause, I have to click on continue, but it is not a "continuous" option at the request of the printer or the product. And after printing half a million pages, the application works. Please help me.
Thank youHello
Once the 1st page printed and reloaded in the status bar, open and close the top page cartridge access door to resume printing and print the 2nd side.
Shlomi
-
Can use the installation disc delivered with the printer and choose to run it using a USB cable or must it be used as a network printer?
The specifications indicate that your HP LaserJet P1102w can be performed wirelessly or via USB.
There is no Ethernet connection.
The QuickStart Guide illustrates wireless / usb Configuration.
When you see a post that will help you,
Who inspires you, gives a cool idea,
Or you learn something new.
Click the 'Thumbs Up' on this post.
My answer-click accept as Solution to help others find answers.
-
Horizontal lines that appear randomly in the Pages document. How to remove?
The lines are a dark gray, almost black. They often appear when reformatting a line or paragraph. I hope there is a way to remove and prevent them.
Oops. Looks like it was an automatic paragraph border turned on somehow. I eliminated it by updating the style of text 1 with borders defined as 'none '.
-
Horizontal lines on HP B209a photo print quality
HP B209a printer
Windows 7
HP print cartridges
HP premium photo paper 240 brilliant gms A$
When you print pictures I get lines1.3cms parallel horizontal apart all the way to the bottom of the image.
the lines are the same color, but darker than the background color on the photo (dark blue color on the blue part of the image, yellow dark on the yellow parts of the image, etc.
I ran the cleaning of the print head, and I downloaded the utility of solving problems and running, but no improvement.
Can anyone help please
Cleaning the print heads seems to have solved the problem (this is a very messy job)
Thank you
-
Animate a line - going through the frame and turning 90 degrees
Hello
I would like to animate a line coming from the top of the image down and half, I want that he turn 90 degrees and continue on the left to the right side of the frame. A good example of this is here: last week tonight - and now this compilation - YouTube
My first attempt: make a shape layer, has drawn a line with the pen tool and added the paths of toppings. I tried to add the effect in the turn of 90 degrees, but the effect does not appear convincing fluid for me.
I think the problem is that rotation, the front point of the line for moving, but really, this must remain in the same position (let's say the Center) and the rest of the line must turn so to speak.
So second attempt: I tried to animate the shape-path this kind of work, but I always end up accidentally change in appearance (thickness) of the line (if this is the way to achieve this effect, I'm sure I can solve this problem although). Also, this means I have to animate the movement towards the front of the line vs. just using the trim road.
What I was asking: is there a simpler way to do it? I want to seek to convince, i.e. have the line moving fluidly on the screen.
Thank you!
I use CS6.
I would forget shape layers, and I would use the traces of mask on solids. You can then use wither STROKE or Write-On effects to make the lines
-
Multi-page printing on Laserjet 1102w
I use a HP Laserjet Pro printer of 1102w wireless on a home network. The operating system is Windows 7 (64-bit). A computer print very well and the other prints multiple pages of a single page document. I checked the settings and I can not just understand what is the cause. I tried to uninstall the printer and the software and reinstalled. He moved so easily and that a page will be printed when you do a test page, but if I print from Word, I get as much as 50 and as low as 10, but never just.
If someone is familiar with this printing problem, please get back to me as soon as possible.
Thank you!
Hi, on the computer that prints multiple copies
go to devices and printers
Right-click on the icon of the 1102w printer
Printer properties
Ports
Uncheck the box "enable bidirectional support".
Click APPLY
-
Printer hp laserjet P1102W wireless light. Windows Vista operating system
After trying to download the firmware update to enable air print from an I - pad 2, the wireless light is out and didn't once again. I tried to reset the printer back to the original settings, but nothing happened. We have a router from linksys E1200 and he worked before you download the firmware without success. Can the wireless connection be restored?
Hi shirley_h,
Rerun the update of the firmware on the printer.
-
random horizontal lines IE11 W7
Suddenly noticing random black and white horizontal lines on monitor while page to scroll upwards or downwards.
They seem to match the points during which I stop scrolling, but sometimes completely block on the full screen with approximately 1/16 "model.
haven't tried to refresh each page help
tried to restart my HP graphics, helped for a while and then crept in the.
Maybe a virus?
Help!
graphics of p.s. HP ENVY17 running ATI HD
Hello
Run the System File Checker
http://support.Microsoft.com/kb/929833/en-GB
Uninstall and reinstall the graphics driver
1. click on Start and type Device Manager
2. click on enter.
4. click on display adapters
5. click on driver list
6. go to the Driver tab.
7. Select Uninstall.
Run Windows Update and then re-install again http://www.update.microsoft.com
Settings reset Internet Explorer http://support.Microsoft.com/kb/923737/en-GB
Thank you.
-
Poor quality HP 7520 and horizontal lines
I recently bought a HP Photosmart 7520, some printed photographs and was very happy with the results. I was already part of a series of photographs printed approximately two weeks ago and decided to print another. The result was poor with horizontal lines, getting more lowest wide printing. I feel like a sheet of foolscap. I went in thinking tests align printer and print quality verification and they looked very good. Another test print is perhaps worse.
The printer reports that my ink black print, not the photo, became weak. All the other inks were very good.
I checked your question and answers and therefore decided to uninstall and reinstall the printer I have this week had an upgrade to broadband and thought that there is a problem. This task achieved I did the self test as requested and the result was first class, but it was of course on the smaller size paper.
An impression more away from the same photograph was worse before she looked like a negative, but in color and with only skin correct tones.
I would appreciate your help as I just upgraded to print photographs as old man... was excellent for doing everything else.
Hi Salty39,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
Sorry to hear that you are having problems with the print quality of your print output. I see that you said that you have recently purchased this unit. I was wondering if you are still using the configuration supplied with the printer cartridges? If so, please note that these ink cartridges are designed only for a limited number of printing just to set up the printer and if you do photo printing, photo, use a good amount of ink. Please also note that HP printers have built in surge protector and if you have the printer connected to a power strip/bar, the printer will not get all the power it needs to function properly and cela could be another reason why you are having quality problems. Here is a document that explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.
Please respond with an operating system that you run and I'll be happy to find more resources about it if the steps that I have outlined have not solved the problem.
Operating system Windows am I running?
Mac OS X: how to find which Mac OS X Version is on my computer?
Thank you for your time.
-
Problem with the HP Laserjet p1102w printer
Hello
I have the problem that my printer HP LaserJet p1102w (wireless) still print on the same page, no matter what I send to print. Curretly I can't print at all because every time when I turn on the printer starts infinitely print the same page... I tried to reinstall the drivers, but it did not help.
How can I solve this problem? Can I do hard reset somehow?
Thanks in advance for any help with this problem!
You don't mention whether or not you have recently installed your printer on a network, but this is a HP document that answers your question, once the product is installed on a network of troubleshooting. Please let me know if it helps.
Product print permanently the same print job
Tobindo
A representative from HP
-
HP LaserJet 3330 shows seven or eight approximately 3.5 "cloudy horizontal lines spaced exactly each 1.5" even when you print a completely white page. This also happens when copy and fax.
There are also 2 very thin vertical lines running down the entire page about in the middle. They are exactly 1 "apart.
However, a scan of a blank page on my computer (not printed) is perfectly clean.
Windows 7. No change or upgrade.
Propbably the toner cartridge, if they are 1.48 "apart that it could be the cylinder in the process of development or the charge roll who are both in the toner cartridge. So a good assumption if you replace the toner cartridge, the problem will disappear. Vertical lines could also be part of this issue.
-
I'm getting horizontal lines on my prints through my epsomsx200 of ideas please
set of photos have horizontal lines of a thumbs down for their
Please see if:
http://www.Epson.co.UK/GB/en/viewcon/corporatesite/products/mainunits/FAQ/2779/1163
and/or,.
http://www.Epson.co.UK/GB/en/viewcon/corporatesite/products/mainunits/FAQ/2779/1168
help.
Maybe you are looking for
-
No previous difficulty following links via Firefox. When I click on the down-pointing triangle, a popup opens with content; However, when I click on 'Open with Firefox', the window closes. In the same 24 hour period, I tried to enter data in a form o
-
Screen on my machine is too dark
The screen on my computer is too dark. My old computer has one of those 'dials turn"on the side of the screen to adjust the brightness. Can someone tell me how to adjust the brightness on my new laptop?
-
Problem writing to the configuration file (.ini)
The attached vi works as stated. Why not write the data to the file, if I remove the code "wait 1 miliseconds? Section and key already exist in the file but only overwritten if I wait a millisecond on each iteration of the loop. LabVIEW 2015 (15.0.1)
-
Can I change the interface language of the GER to ENG?
Hello I work in a company that has Labview software in German language. I am an English speaking person and I've learned to use labview in English so I would like to know if it is possible to change the language from German to English. If there is no
-
Disable the touchpad on HP 6530 b
Can someone help me to disable my touchpad on a 6530 b? I use a mouse and the cursor jumps around. The driver for the touchpad did not exist originally, but I managed to download the Symantic driver, but the 'disable' button is grayed out, and noth