Horizontal lines in printing of OJ J3680 A-I-O.

Similar Questions

• HP OfficeJet Pro 6978: Horizontal lines in printing photos on paper photo with HP OfficeJet Pro 6978

  I bought a HP OfficeJet Pro 6978 today and implemented according to the instructions.  I loaded with premium photo paper more HP and proceeded to print a photo from my Mac.  As he came on the printer it has horizontal lines there.  I read somewhere on the forum that it could be a software problem, so I went to my computer to Microsoft and tried to print the same image using OS 7 and the results are the same.

  After reading some of these other forums, I pulled the plug and has waited a few minutes and plugged back in and the problem was solved!

• horizontal lines when printing photos

  I have an Officejet Pro 8600. When I print photos I threw 3 lines horizontal light through the photos on 1/4, 1/2 & 3/4 to the bottom of each photo. I changed to the best print quality and personalized and always get the lines.

  I would like to look at this here document that addresses the issues of print quality for your printer model.  As soon as you select your operating system, so that it will drop down give information on how to address the shortcomings of production for the printer.  Down on this page, it will be an example of a picture with horizontal lines. From there, it will tell you how to solve the problem.  Once the solutions you mentioned to change the print settings. But there are other things to try listed after this one. I hope this helps.

• Ho B210a photosmart horizontal lines color printing

  How to get rid of the horizontal color printing lines, even though I replaced the cartridges.

  Run 'cleaning print head' or 'print the State of quality' in the Tools menu of the printer.

• blurry horizontal lines on my Office Jet 8100

  All of a sudden, I started getting poor print quality on some horizontal lines in my documents. It seems to be on the lines with black color. Initially, he would pass on the third or fourth copy of the same document.  As it hasprogressed, it's about everything print.

  The test prints streaks see the white.  I swapped the cartridges, clean the print head, but it gets better, it gets worse. Is there maintenance user, I can do, or do I need to take it to a shop?

  Thank you.

  Hi Bill_Boz,

  Welcome to the HP Forums!

  I see that you see blurs horizontal lines when printing with your HP Officejet 8100. I'm happy to help you with this problem of print quality!

  Please have a look through this guide to the print quality. Troubleshooting print quality problems.

  If this does not work, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Hope this helps you and have a great day!

• Horizontal lines after having printed a picture with HP 7610

  I use some software to print jewel case labels that correspond exactly to the size of the standard case for audio cd

  After inserting a picture for the front using this software label and then print this label on photo glossy paper, I always notice lines horizontal spacing to exactly equidistant around the image.

  This is expressly visible in dark areas of the image.

  I think that these equal distances have something to do with the speed of printing process. 7610 HP needs only a few 'RSS' to achieve the impression of this label and I suspect those 'son' match with these lines (but maybe I'm wrong).

  Can someone give me some advice how avoid these lines?

  My OS is windows 7 Home premium 64-bit.

  Thank you.

  Hello HevntLgh,

  Go to the page on the link for me has given, I noticed the "horizontal stripes in print" to halfway this page.

  Then I read 'Check the print settings' for windows 7.

  Following the recommended steps and get to the stage 4 'media '.

  I tried several paper type settings without getting rid of these bands.

  But by right-clicking on the window "Select printer" (series HP Officejet 7610) and then go to 'Properties' and select the 'Advanced' tab, I noticed that the button "print documents of the coil so it ends sooner" has been verified.

  But I already had the idea that quick impression was the cause of the problem (printing with the major steps of power).

  So I unchecked "spool print documents for her ends faster" and checked "Print directly to the printer" to see if printing will give more time, then print. And indeed this was the case and I finally got rid of these ugly bands!

  Thanks a lot... to put me on the right track to solve this problem.

  I hope that other will have the advantage of this solution too.

• Why is my printer HP LaserJet Pro CM1415fnw prints 4 horizontal lines of each color of ink?

  My printer prints 4 horizontal lines of each ink color.  Sometimes it does and sometimes it doesn't.  I tried the recalibration, restart, remove all the cartridges and put in new cartridges.  Nothing works.  What is the drum?  The printer is only 6 months old.

  eswanson,

  This article should cover the problem you are experiencing. Give the steps a shot and let me know if it helps:
  http://goo.GL/KGvSV

  Good luck!

• My deskjet 3522 print horizontal lines with no printing on the lines

  My deskjet 3522 print horizontal lines with no printing on the lines

  I solved prolem with horizontal lines with no printing on the printer cleaning lines and lining up and will leave no paper in the tray to dust cllect

• Horizontal line going through random pages printed by LaserJet P1102w

  From time to time, I see my P1102w print pages with a small horizontal stripe. This happens only on a single page (not the one just before or just after). I looked in the manual and don't see in the troubleshooting section.

  I doubt that there is toner low, such that it has less than 1000 pages are printed on the current toner.

  Any suggestions?

  
  HP LaserJet p1102w

  Nothing on this page that you linked to, adapted to my problem.

  I just changed a new toner, and after 75 pages or more, I have yet to see this horizontal line randomly. It was printing on pages 5 to 8 or more, then it is a fairly representative sample.

  It is strange, however, assuming that it is the toner. I got about 1000 pages out of it, maybe less, but it is a bit disappointing. I put in when I am done with this new toner, just to get my money, but still...

• Shows HP LaserJet 3330 horizontal lines exactly each 1.5 "when you print a completely blank page

  HP LaserJet 3330 shows seven or eight approximately 3.5 "cloudy horizontal lines spaced exactly each 1.5" even when you print a completely white page. This also happens when copy and fax.

  There are also 2 very thin vertical lines running down the entire page about in the middle. They are exactly 1 "apart.

  However, a scan of a blank page on my computer (not printed) is perfectly clean.

  Windows 7. No change or upgrade.

  Propbably the toner cartridge, if they are 1.48 "apart that it could be the cylinder in the process of development or the charge roll who are both in the toner cartridge. So a good assumption if you replace the toner cartridge, the problem will disappear. Vertical lines could also be part of this issue.

• HP Officejet Pro 8500 - horizontal lines that cross color print

  I just replaced the two print heads.  Ran alignment and the screen says it was successful.  Black print was nice, but color printing had horizontal lines through it.  I use it through windows 7.  The color is not true, when I run since Ubuntu 10.04.

  For print quality troubleshooting questions, check them out steps in the document located here.

  So, since you just change the print heads, check the steps located heredocument.

  I hope this helps.

• I'm getting horizontal lines on my prints through my epsomsx200 of ideas please

  set of photos have horizontal lines of a thumbs down for their

  Please see if:

  http://www.Epson.co.UK/GB/en/viewcon/corporatesite/products/mainunits/FAQ/2779/1163

  and/or,.

  http://www.Epson.co.UK/GB/en/viewcon/corporatesite/products/mainunits/FAQ/2779/1168

  help.

• HP laserjet m277dw: horizontal lines on HP laserjet m277dw

  I have a m277dw HP printer color laser, purchased two weeks ago. After about 10 pages, he began to print horizontal lines 22 and 23 mm. They are better visible on a single color background. Are still visible on the page of demonstration with ball.

  Support couldn't see them on scan I sent by email, but they say it is possible that these lines are ok for this printer (?).

  They are terrible and extremely disappointing, can you confirm that this is a normal operation of the printer?

  I used normal paper and the default settings for printing from my pc. I also sometimes spill toner on a page in different places, sometimes even on the back of the page.

  I tried to clean the drum of imaging with a soft cloth, it helps with spills and also makes lines less visible, but only for a few printed pages next. I also tried to make the calibration and cleaning page, but without success.

  https://www.dropbox.com/s/u4n3y7k67pic6yt/IMG_1426.jpg?DL=0

  https://www.dropbox.com/s/afl549df6cmu23y/IMG_1427.jpg?DL=0

  I see the lines and they are not normal for any laser printer which makes HP.
  
  I suggest trying some different solid color pages that mix the colors as a green page and perhaps a red page.
  
  You can also see the problem in print quality pages that have been mentioned by the previous poster.
  
  You just need to get something where support can see you have a problem and then be insistent that they fix it.
  
  But let's be practical here, you bought less than two weeks, return it and get another, it's probably only a defective cartridge but you should not have to fight the HP support for service.
  
  And I want to return and get a refund then buy the replacement. You want a receipt to go with your new printer clean, clean as in with a good date and anything else on this topic.
  
  If my post is solved your problem and click the accepted as button solution under him.
  
  In order to thank a Tech for a post click the thumbs up button under the post.
  
  You can even click on the two keys...

• Preview of the scanned image is good but once saved image is black with horizontal lines

  My OS is: OSX 10.9.3

  I have a HP Photosmart Premium series - C309g all-in-one machine. This machine worked well.

  Print is good.

  Copy is good.

  But now I have some analysis of the issues, probably due to an update of the OS.

  Problem: Preview of the scanned image is good, but what saving image--> the image is black with horizontal lines.

  I rumaged through the forums and you have not yet found a solution to my specific machine.

  Any help would be greatly appreciated.

  Thank you!

  Hello

  Scan using the software provided as Capture of Image or preview.

  The application of scanning HP for your printer is not available to 10.9, you use incompatible software.

  Follow these steps to get the results of the analysis required:

  http://support.HP.com/us-en/document/c04028214

  Shlomi

• HP LaserJet Pro CM1415fnw: Horizontal lines

  I get horizontal lines of black soft about an inch and a half out when printing. I ran a cleaning cycle and the lines are still there.

  You must find the ruler of repetitive defects to the machine as we speak. The repetitive defects ruler is a chart that shows what the machine rolls can cause a problem based on the distance between the beginning of a defect in the beginning of the next.
  
  But to make it even more simple since you use a machine of color and the default appears in a color then it is almost always going to be color, in that the default is the toner cartridge.
  
  If my post has solved your problem then please be admitted as button solution under him. In order to thank a technician for a position you can give them congratulations by clicking on the thumbs upwards the button under the post. Hey it's Friday you can click on the two buttons.