Horrible with iPhone 6s and 6 home

Seriously considering to return to our iPhone 4S and iPhone 5. We NEVER had problems talking on the phones of the thesis of our House.  Now with our new 6 phones must walk outside to talk!  And when my husband is in his office, he must walk outside to talk.  This is unacceptable.  Our phones are essential to our work!  What is going on?  We called technical support and was told "it must be our carrier."  Not true.  We have NEVER had this problem before.  Not getting any HELP from Apple!  Not that this matter wrote on this forum other than to help our mental health.  I'm sure that they are not read by Apple. Apple very frustrated and dissatisfied.

Who is your provider?

You spoke that carrier your question?

How many points of strength of the signal and what kind of service is this? LTE / 3G?

Tags: iPhone

Similar Questions

  • Problems with iPhone 7 Plus the 'home' button?

    Today, I stopped at a store and looked at the time of 7 more for the first iPhone. I was curious about the new home of the haptic button.

    I didn't feel a thing well. I thought there might be a setting and so I asked a salesperson. He said he "thought" he could feel a bit and had me try things like closing an application and return to the home screen. But no matter how gently or strongly I pressed the home button, nothing happened. Once opened Siri, but then I couldn't close it.

    He couldn't have worked either do.

    So, while I admit that my "sampling" is small, with 100% of all so far the 7s iPhone I tried the home button does no haptic feedback and does not work well.

    As it was a display model, of course, I'm curious - are these kinds of common problems?

    I just posted my concern in this regard. I have the 7 +.

    and the home of the Taptic button does not work. I have to still physically, press on the

    button as I did with the 6 +. So what is the difference?

  • can you help me with the first and sounds home theater?

    Hello

    lynda tutorial, I bought, but I couldn't find a video to help me work with audio to create a home theater sounds

    There is a simple diagram of a home theater

    1887995-51surround.jpg

    Well my question is linked to my timeline and audio

    How can I have on my timeline audio that sounds on the left rail only, or left / right back together

    y at - it a video tutorial?

    or can you help me?

    Thank you

    You are looking at Video Mixer, you need the track mixer.

  • Analytical, when you publish with iPhone 4 and iPhone 5 folios

    For the last three months, began to publish a folio of the iPhone 5 in addition to the prev iPhone 4 and the IPAD slips.

    To avoid having the iphone 4 folio appear in the library of the iphone 5, we publish the iPhone 5 first and make sure it has the same name of publication, version numbers, and the name of folio.

    When it comes to Analytics, we can see a folio iPHONE and an IPad folio.

    Now, since the two folios of the same name, we would include the following: -.

    -Is specific to a folio iphone Analytics (iphone 4 or iphone 5), or are they combined for both?

    The numbers that we see in comparison to prev questions suggest Analytics shows to a folio only!

    How can we overcome them, especially that we have an urgent need to know the number of specific problem regardless of the device.

    If the figures transforms for a folio, how can we safely tackle this and get acquainted with the figures for the other folio

    If your name of slip and the # is the same version for the iPhone 4 and iPhone 5 folio; then you'll see analytical handset for two sheets of SiteCatalyst. In SiteCatalyst, you can do a breakdown of metrics in iPhone 4 announcement iPhone 5 to really understand the download / metric of engagement for different devices. Feel free to touch me directly with your name of the publication / report suite ID and I can help you.

  • Problem with Apple TV and sharing home

    Almost everytime I turn on my Apple TV asks me to turn on home sharing, but home sharing is turned on.

    The only way I can solve this problem is to restart the Apple TV.

    Hello Jazzichic,

    Thank you for using communities Support from Apple!

    I understand that your Apple TV have a problem stay connected to the homepage of Sharting. We know that situations like this can be frustrating, but we are here to help!

    To begin troubleshooting, I suggest to read and work through the steps in the following article.

    Get help with sharing home - Apple Support

    See you soon!

  • Problem with WIN 7 and XP Home Network

    I have a home network with 2 cable to the PC through a D-Link N Router extreme. Main PC is WIN 7 and XP Media Center. When put in first place, worked well, but PC now recognizes the other, nor so I can share files more. The two PC's have Internet access through the router, but cannot communicate with each other. I did all the trouble shooting suggested with no luck. Firewalls appear correctly implemented yet. Can someone help me understand this?

    Network Assistant served twice trying to restore the Home network, but still no luck. Other devices may wireless connection to the network & Internet successfully. Printer is connected to the router USB and used all the devices until this problem with XP unit. Utility said Shareport printer is available, but the XP unit will not connect. I am frustrated no end... help, please!

    Hello.

    I had this problem once I still have XP on one of my machines and the way I fixed that using Workgroup, use this site I used to fix my problem, simply ignore the part printer but it will solve the problem you have: http://www.howtogeek.com/howto/windows-7/share-files-and-printers-between-windows-7-and-xp/

  • Problems with iphone 4S and ios 9.3.1

    I've updated my 4S 3 years yesterday at 9.3.1 - well, I wanted to do. The process has failed and the phone wanted itunes to restore connection. And that is not too much. I tried with a 10 Win and a Win 7 machine, with a new installation of itunes and USB driver and all the protection virus and firewall disabled. WTH upgrade and with a reset to the factory settings. "What combination I've tried, I finished with an error' 29 ' 2/3 down the road from the installation of the process. Apple support couldn't help me and finally told me that it is a hardware problem. But I can't believe that a phone that worked yesterday with transparent 9.3.0 and does not work today with supposed 9.3.1 a hardware problem during the night. An idea that I can do to recover the phone? Seems to be a bug in the 9.3.1 from my point of view.

    Same situation here: error 29 during the "firmware update". In my case, it turned iOS loved 9.3.1 is no longer the 3rd replacement battery part I installed two weeks earlier. I put in the (dying) original battery and the update worked.

  • A no matter what you have ESXi 4.1 configured with HP SIM and system home page?

    Does anyone have ESXi 4.1 configured with HP SIM? I installed ESXi 4.1 with the HP Agents but must monitor via HP SIM so that we can monitor the hardware. Also is there a way to get the home page of the HP system to appear on port 2381? Or which is no longer available with ESXi 4.1?

    For information about how to configure HP - SIM, take a look at http://communities.vmware.com/message/1590665

    The homepage of management is only available for ESX, not for ESXi.

    André

  • WG102 fails with iPad / iPhone with iOS 6 and WPA2 / AES - urgent correction necessary!

    Hello *.
    *
    After upgrading my iPad to iOS 3 6 he constantly fails to connect to WiFi with WPA2 and AES - hidden or broadcast SSID - at home and at work because the device does not accept the WPA2 password. This is also the case for my iPhone 4s, but the two appliances worked with WiFi (WPA2 / AES) perfectly with previously installed iOS 5.1.1.
    *
    I tried to downgrade to iOS 5.1.1 but it seems to be is no longer possible to downgrade the two iPad 3 and iPhone 4S as certification and maybe the viewport for iOS 5.1.1 was closed by Apple.

    Strange behaviour seems to address a problem of firmware of the installed Netgear WG 102 APs that all do not allow the connection of iOS 6 devices with WPA2 / AES enabled :-(

    Does anyone know about a possible solution to connect to WiFi with WPA2 and AES with 3 iPad / iPhone 4 and iOS 6 update for Netgear WG 102 APs?
    *
    Thanks a lot for any help and advice.
    *
    Best regards from the Germany
    *
    Matthias

    The downgrade to 5.0.1 works. He fixed a connectivity with my two devices IOS 6, my wife 5 iPhone and my new retinal screen of the iPad. It does not appear to have caused problems of connectivity with other devices down to 5.0.1

  • Calendar and contacts from blackBerry Smartphones don't synchronize with outlook 2013 (win8) - in collaboration with IPhone and Ipad air 5s

    Hi all

    I just moved to a new PC (ex: Sony Vaio with win 7 pro, outlook 10 pro > new: duo of vaio from sony with win 8, Outlook 13 home office 365). I used to sync outlook contacts and calendars with blackberry and iphone and ipad on my old laptop using the BlackBerry Desktop Manager.

    Now with my new PC, iphone and ipad are always works well and they synchronize with outlook: new entries on the outlook calendar and new contacts are added to my laptop and vice versa, but when I connect my Blackberry "BOLD" I n get the updates.

    I confirm that I use the latest version of the desktop manager 7.0.

    My organizing Office Manager is configured to sync both calendar and contacts

    Any idea please?

    Thanks in advance for your help

    MC

    Hello and welcome to the community!

    Unfortunately, you went beyond the platforms supported, see:

    Outlook 2013 is not supported at this time.

    I'm sorry.

  • Cannot restart or refresh my iPhone 7 from the "home" button and the sleep/wake button at the same time

    I'm having difficulty trying to restart and update my iPhone 7 using the Home button and the sleep/wake button at the same time, when I do my phone takes a screenshot of the home screen.

    Should I turn off my Touch ID?

    Basically my home button button and / standby works not together at the same time.

    You need hold the House and turn off the button for 20 seconds, until the Apple logo appears.

  • Hi, I bought a new Apple MacBook Air yesterday of FNAC in Geneva, and when I got it home I couldn't go beyond the black bar. In the end, I got a white circle with a slash and a black screen. Please tell us what to do. Thank you.

    Hi, I bought a new Apple MacBook Air yesterday of FNAC in Geneva, and when I got it home I couldn't go beyond the black bar. In the end, I got a white circle with a slash and a black screen. Please tell us what to do. Thank you.

    Bring her back. It's new, it's at the shop for sorting or replace it, not you to try to fix it.

  • I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to look for a screen tested on it, it didn't work

    I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to get a screen tested on it because she does not have the person had not on is it did not work, even if the person has used only flow to correct and get a few corosions out with the replacement of some components of the person responsible for 10 minutes after having plugged in and the battery it wamer so it as I said her test with a multi meter test and he registered 12v and I wondered if something was wrong with it and if I could fix it easily?

    Check the liquid Indcator of Contact.

    Instructions here > liquid for iPhone or iPod is not covered by the warranty - Apple support

    Just so you know, the service of the liquid damage to an iPhone or iPod is not covered by the limited warranty of one Apple or an AppleCare Protection Plan (APP).

  • I bought an iPhone 6s and want to transfer the data from my old iPhone 4S with iTunes

    I bought an iPhone 6s and want to transfer the data from my old iPhone 4S with iTunes but it says "the"iPhone"iPhone cannot be used because it requires a newer version of iTunes. Go to www.itunes.com to download the latest version of iTunes. "

    I checked and the version of itunes is the latest AID!

    DooozySue wrote:

    I checked and the version of itunes is the latest AID!

    Most likely, what you found, is that the iTunes version is the latest available for your operating system.

    The latest version of iTunes is 12.4.3.  This version requires at least OS X 10.8.5 or later version, or Windows 7 or later version.

    If your iTunes version is earlier than 12.4.3, it will probably not recognize your 6s performance iPhone iOS 9.

    If you do not have the required operating system, get first.  Then download from iTunes

    http://www.Apple.com/iTunes/download

  • How can I get Office 365 to sinc with my ipad and Iphone?

    How can I get Office 365 to sinc with my ipad and Iphone?

    Synchronize what, exactly?

Maybe you are looking for

  • YouTube is on 60 fps on google chrome, but why not on updates?

    What is the fuction YouTube for 60 fps avalible for Updates because his work only on google chrome and lovethe 60 images/s Please update so fast if it works < 3

  • Update = blue screen of death

    Hey mate, I get the same thing, whenever I try to install, I actually had help trying to install it and got charged by an employee to shut down my computer in the middle of updates. so I decided to not install at all it is a software removal program

  • Acer aspire startup E1 problems

    I've got a laptop which I had the pleasure of using for 2 years, but today when I tried to use my laptop it seems to freeze on the login screen windows 10. When you connect an external mouse and a keyboard only the mouse seems to work. the keyboard a

  • 32-bit Windows to 64

    Hello I have two 32-bit service pack 1 Windows 7 and I want to migrate from 32-bit to 64. Can I buy new Windows 7 64-bit service pack 1 operating system or what you please guide me. existing 32 bit being paper license. How can I switch from 32-bit to

  • Current connected user returning 'anonymous' in the environment of the client only.

    Hi all.We are having trouble getting to the user currently logged on our faces / ADF / BPM Workspace application running at the customer.First of all we try this:Director main = ADFContext.getCurrent () .getSecurityContext () .getUserPrincipal ();OrS