Host controller high-speed USB 2 for Satellite 1110

I have improved my Z15 Satellite 1110 XP home to XP Pro. I feel that I have 2 USB ports on my laptop. Problem that I face is that when I connect a USB 2 device, it can not find host controllers and operate at 1.1 speed.

I read maybe it's a problem with the motherboard drivers, is there anything I can download to fix this problem?

Hello

If I remember your unit has three USB ports and they are definitely 1.1. There is no way to make them faster. One solution is to use the USB 2.0 PCMCIA card.

It is not some kind of anomaly or problem and there is no way to fix it.

Tags: Toshiba

Similar Questions

  • How can I add a USB host controller high-speed to my PC?

    My OS is windows xp home edition. I get this message that the HI-SPEED device attached to Non HI-SPEED USB Hub.

    The USB Composite device is a USB HI-SPEED device and will function at reduced speed when plugged into a port not HI-SPEED.

    There is no host controller USB HI-SPEED installed on this computer.

    Recommendation: You add a USB host controller high-speed on this computer in order to get maximum performance.

    So, how can I add this USB host controller high-speed to my PC? Is - this material I must add and physically install to my PC?

    As always, any help is greatly appreciated.

    Thank you!

    drake68

    Hi Drake,

    Review the devices USB connected to your PC and make sure that there is not a USB 1.x device connected to the same USB HUB (front or rear).  USB 1.x devices will cause the USB HUB at the bottom shift to 1.x speeds.

    You have an old PC (2002), it is possible that your PC does not have a USB HUB 2.0.  In this case, you need to install a USB PCI adapter card.

  • upgrade to usb host controller high-speed

    I received a message that my device could run faster if I have upgraded to a usb host controller high-speed. Is this something that I can download or I have to buy a new usb controller? Thank you, Kevin

    If your system is old, it may have have USB 1.1 ports. Only way to fix it (if you use USB 2 devices. Either buy USB 2 PCI cards), or upgrade the system. If you get / have ports USB 2

  • Satellite A200 - 14 d high speed USB warning

    Hi, guys :)

    For a few months, I have this warning message...
    I looked in a lot of forums, but found answers very very different each time :( Hope you can help me.

    I usually only 1 USB mouse connected to my laptop (with Windows XP Pro SP3).
    The mouse is some Logitech thingie high-speed - nothing special.
    So my WinXP gives me regularly (3-4 and several times a day), a warning about HI-SPEED USB device attached to non-HI-SPEED Hub.
    There is a list in the window of warning with 8 ports.

    -> Intel (R) 82801G (ICH7 Family) USB2 Enchanced Host Controller - 27CC
    --->(8 ports) USB root hub
    ---> Unused port
    ---> Unused port
    ---> Unused port
    ---> Unused port
    ---> Unused port
    ---> Unused port
    ---> Unused port
    ---> Unused port

    There is a recommendation below that says:
    Unplug the device USB Composite from its current port and then connect it to one of the ports on a hub are bolded.

    I looked in the Device Manager Windows in Universal Serial Bus controllers- section.
    Here is a list of what's inside:

    ---> Intel (R) 82801G (ICH7 Family) USB Host Controller - 27 8 Enchanced
    ---> Intel (R) 82801G (ICH7 Family) USB Host Controller - 9 27 Enchanced
    ---> Intel (R) 82801G (ICH7 Family) USB Host Controller - 27CA Enchanced
    ---> Intel (R) 82801G (ICH7 Family) USB Enchanced Host Controller - 27CB
    ---> Intel (R) 82801G (ICH7 Family) USB2 Enchanced Host Controller - 27CC
    ---> Composite USB device
    ---> USB hub root
    ---> USB hub root
    ---> USB hub root
    ---> USB hub root
    ---> USB hub root

    I have 4 USB ports (2 on each side of the laptop) and an integrated which is used by the WebCam integrated (think about the last concentrator Rood was the Cam, for when I turn it off, camera stops working and when I enable it again, Windows says, that it has detected a new hardware Chicony USB 2.0 Camera).

    What should I do?
    Let the fact that this warning for HI-SPEED USB is very very boring...
    There might be a hardware problem :( I noticed that controllers host Enchanced USB Intel (r) 82801G deactivation does nothing...
    Everything works as usual.
    For example if I disable the Third USB Hub of Rood, my USB mouse stops working (obviously for the USB port where my summer mouse attached to). But with Intel controllers - nothing.
    How can I use them? What drivers? If this is the case, where can I find new?
    Toshiba obviously do not support its laptops with Windows XP installed on them :(

    Thank you in advance!
    rbaleksandar

    I agree with Akuma. Try uninstalling the USB drivers and if you have installed the drivers for the mouse, remove them and try again.

    In addition, I would try to update the chipset drivers and BIOS. The two you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    In the worst case, you must reinstall the laptop with the Toshiba recovery disc.

    On the other hand, you have this problem with other USB devices? Maybe it s not a problem of the laptop.

  • Device 4 ports high speed USB 3.0 Hub useful Para PC computer

    Hola amigos

    Al enchufar el 4 ports high speed USB 3.0 Hub useful Para PC computer
    a mi PC, e me lights luz roja, pero no me works, porque me da error code 43 Windows.
    Me pide UN driver y no me lo reconoce.
    Intento find a driver there still no lo he achieved
    Alguien me can help, a packaged good
    MUCHAS gracias
    A greeting

    Hello

    You created this thread in the English version of the Microsoft Community. Please could you click on the globe icon to the world at the bottom left of the screen and then choose your preferred language. Now create your thread again.

    If you can't find a suitable language, please go here:

    http://support.Microsoft.com/common/international.aspx

    for other international support options.

    Thank you.

  • High speed USB 2.0 physical location of the port

    I have a HP Pavilion dv6-3122us Notebook PC. I get messages when the transfer of files on the fastest "high speed USB 2.0 port.  My user manual tells me that I have three ports, of which one is a 2.0 port but I am unable to say which is the 2.0 port. Can anyone help me find information on the location and identification of the usb ports?

    James Worthen Sr

    I just got offline with a HP tech rep and he told me that the high-speed 2.0 port was, in fact, the eSATA/USB port.

    With this port, it gives me four ports and I wouldn't imagine that it was even a USB port, as it seems slightly different rather than the usual USB ports. I pluged my Bluetooth adapter in this port and it works fine. I have not tried to transfer files with this port again, except the photos with the bluetooth, but when I do I will seek to see if I still get the same message while transferring. I doubt I would. I believe that this issue has been resolved and I will mark it as my. Thanks to all who responded.

  • Updating BIOS for Satellite 1110-Z14

    Does anyone know what the BIOS update is right for a Satellite 1110-Z14? It doesn't seem to be a specific list on the drop-down list for this machine. I was wondering if I need to use the Satellite 1100.

    Hello

    I think you should use the BIOS for Satellite 1110. It seems that it can be used for all models of 1110.

    Good bye

  • How to upgrade host controller Renesas Electronics USB 3.0 for installation of Windows 8?

    I am running Windows Xp and I'm trying to upgrade to Windows 8. During installation it says that my 3.0 of Renesas Electronics USB host controller is incompatible. What should I do to fix this? Is it possible to date?

    Hi Dan,.

    Please contact Microsoft Community.

    If a device is not compatible with Windows 8, you can try to remove the device and then proceed with the installation. You will not be able to install the unit on the computer after the installation of Windows 8.

    I suggest you to disconnect all external devices except the monitor, keyboard and mouse and check if the problem persists.

    I suggest you to contact the manufacturer of the device for any update.

    I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

  • Ports high speed USB Equium A100

    I installed a webcam Advent (before exchanging it for a better creative). Part of the installation process involves installing a Microsoft's USB controller. (OS is Windows XP Home Edition). I uninstalled the ADVENT software when I got back to the webcam.

    Since then, I started getting messages every time I plug a USB device, on a device high-speed, requiring a port high speed.

    When I look in Device Manager, I have two sets of Bus USB controllers:

    One includes 2 standard OpenHCD USB host controllers, 2 USB, 1 support 2 USB hubs and USB printing composite devices. Their drivers are dated 2001.

    The other includes 1 class PCI USB 2.0 enhanced host controller and USB Root Hub Device 1. Their drivers are dated 2006.

    I have 4 USB ports and all seem to be using the first series of USB controllers. If I disable one of the controllers, then various USB devices stop working.

    As my laptop is only 18 months old, I would have thought that all USB ports are 2.0 version?

    How can I 'forcing' the laptop to use the second set of controllers?

    Hello

    I think that the biggest problem, it is you would waste more time to fix such a driver related issue then just entering the recovery CD and performing a recovery of your entire system.

    Perhaps the fastest way to put little life back to your ports USB 2.0 high-speed. Otherwise, I had suggested to remove all ports from the Device Manager and let windows after a restart re-install all the drivers, but before perform the reboot it would be better to manually remove all THE drivers installed previously.

    Maybe it helps, but if not he would have definitely better to perform the recustomization...

    Concerning

  • USB 3.0 connecting high-speed USB 2.0 drive

    I have a Western Digital 1 TB USB 3.0 external hard drive. I connect it to the USB 3.0 port (blue) on my laptop Acer Aspire 5755-6647, who works under Windows 7 x 64.

    When you connect, I get the "this device can perform faster: this USB mass storage device can transfer information faster if you connect it to a Super Speed USB 3.0 port" message. When you copy files to the drive, I get about 32 MB/s, which corresponds to a USB 2.0 speed.

    I tried to disable the USB power management in the utility USB 3.0 host controller. I tried to uninstall the device and put it back. I'm using the cable supplied with the disc and is a USB 3.0 cable. I have the latest Renesas USB 3.0 driver installed (2.0.34.0). I also tried to use an older driver from Renesas. My BIOS is updated (P5WE0121).

    I don't know what else to do. If it helps, the first time I have connected my laptop hard drive, it's on a USB 2.0 port (I had for some reason any remembered which side of the laptop had the port 3.0 and does not check for blue). As I have said, however, I completely uninstalled the device. I suspect that Windows can be "remember" the device and install with the 2.0 driver.

    Update: I finally try one last thing before you go to Acer support. I thought that perhaps not enough power provided by my USB 3.0 port on the drive, forcing him to 'downgrade' 2.0. So I bought a cable to Yfor $5 to offer auxiliary power of the adjacent 2.0 port. Result: IT WORKS. Immediately connected as a USB 3.0 peripheral speed and transfer is USB 3.0.

    Solved. A little disappointed with the Acer/Intel for the USB 3.0 under normal, however.

  • Message: This device can perform faster if you connect high speed USB

    Hello

    I have a laptop Toshiba Satellite 2009 of Vista.
    I just bought a multimedia design Memup Feel of the disc hard 500 GB.

    My concern is that when I connect to my PC, I have the following message:
    + This device can perform faster. USB devices can be faster if you connect to a USB 2.0 high speed +.
    + To get the list of available ports, click here. +

    Then I have a list of ports in bold, but I don't know what to do with.

    How to solve my problem?

    Thank you

    Hello

    Are you sure that your laptop is Satellite 2009?
    I put t know this model of laptop.

    But I know that this error message; This message appears if you connect a USB 2.0 device to a slower USB port; That is, USB 1.1
    But I think that your laptop supports USB 2.0 ports either TI problem disc external HARD s or the issue of USB drivers
    Try updating the chipset driver you can also delete all the USB controllers and hubs in Device Manager ports. Restart the unit. After restarting again the OS would recognize all USB ports.
    Then try to reconnect the USB HDD

  • D-Link DUB-E100 high speed USB 2.0 Fast Ethernet Adapter

    I have a problem with my LAN card when I come overseas for a business meeting. I choose not to send my new phone Samsung difficulty since it is necessary for a meeting. So, I bought this adapter for temporary. It took me an hour to make it work on my Windows 7 with WinXP driver (there is no Win 7 drivers available). I found it works well if I use only for my Microsoft Outlook, but not at all for the Web site. Most of the time I try to surf, my system crash and blue screen appear. Any people have any idea what should I do? I have to be on this thing for months and I have so much to do between this computer and my office.

    Why can't you buy something that is Wondows 7 compatible? The DUB E100 is also old

    On the site of D-Link...

    «The D-Link DUB-E100 is a Hi-Speed USB 2.0 10/100Mbps Fast Ethernet Adapter specifically designed to plug into a port Universal Serial Bus (USB) available on a computer desktop or laptop PC running Microsoft Windows XP, Me, 2000, or 98SE.»

  • Converter USB/serial for Satellite P100-112

    Hi, I need to buy a converter usb/serial for my P100-112. The one I have, I can't make it work with my current machine. Tips for what to buy would be appreciated.

    Hey Buddy,

    I googled a bit around and found an example for a converter that can be useful for you:

    http://www.ramelectronics.NET/HTML/usb_serial.htm

    Please give some feedback what you need exactly, maybe find us something better...

    Welcome them

  • Question about upgrading the CPU for Satellite 1110-Z14

    Hello

    My satellite 1110-z14 has a processor intel mobile celeron @ 1.5 ghz. The processor is based on architecture p4 - it should be a northwood-256.
    Is it possible to upgrade the processor?

    1110-z20 is powered by the mobile celeron @ 2.0 ghz - all other technical specifications except the hard drive are the same... (ati radeon m6 with 16 MB, usb 1.1 mob and so on...).

    What do you think, can I upgrade the processor?
    Can what cpu I use?

    Thanks for your replies!

    Hello

    AFAIK the 1110 series computer is equipped with an Intel 845MZ system controller.
    I found some details about Intel 845MZ chipset on the Intel page. It must be able to manage the Mobile Intel Pentium 4 - M with 400 MHz FSB Processor
    http://www.Intel.com/products/chipsets/845MP/index.htm
    On the Intel page, you can find the entire family of the CPU.

    But generally the replacement of CPU and the upgrade is not recommended and no one can say whether the OS will run stable after these updates, so be careful.

  • Re: 1 GB of RAM / update BIOS for Satellite 1110

    Hello

    I ordered 2 x 512 MB of RAM at CompuRAM. According to their information 1 GB is possible for this model. According to the user manual only 512 MB is possible. As normally CompuRAM information is right (maybe necessary BIOS update), I tried.

    But it does not work. I can only use 1 x 512 MB.

    Does anyone have information on RAM update for Toshiba Satellite 1110 (model PS111E-003DN-GR/S1110-Z16)?
    Could help update the BIOS?
    How to find the update of the BIOS in the Toshiba homepage (model 1110 does not exist)?

    For any help thanks!

    Thomas

    Hello

    I found the info that this notebook can handle with 512 MB max.
    Sorry, but the BIOS update is unable to help.

Maybe you are looking for