Host network IO performance

Similar Questions

• Example: Pavilion ac123tx: hosted network does not start

  in my computer hp laptop ac123tx (preloaded with win 10 OS) not able to start the wifi hotspot because it lacks the virtual network adapter hosted Microsoft. I tried to start the hosted network from cmd prompt, but every time it gives message hosted network could not be started. The group or resource is not in the correct state to perform the requested operation. what need have the solution to this?

  Hello @gbnavapara,

  Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post about the WiFi problem and wanted to help you!

  Have you tried activation of the adapter in the Device Manager?  You can use the resources here to help: difficulty The Hosted network could not be started in Windows 10 error

  (Not a HP website supported).

  Also, you can try to update your network drivers.  If you're still having problems, then try to review the measures offered in the following post:

  Re: Microsoft organized virtual adapter network - this device is not connected to the computer

  Let me know how it goes.  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• "The hosted network could not be started."

  I recently bought a Samsung Galaxy S2 and when trying to connect to my Wifi network, I found that the signal from the router was not strong enough to reach the floor, and since I have a laptop connected with a cable that I thought I could make it work like a virtual router. After some research, I found several programs:

  I tried Connectify, which did not work. Then I tried Virtual Router, that does not work either. Then, I found this:

  http://www.techylabs.com/setting-up-a-virtual-router-in-Windows-7.html

  And it worked, the network appeared in the list on my phone. Unfortunately, when you try to connect, it got stuck on ' Optaining IP-address '.

  I tried to use a static IP address, and even with one put in place, it got stuck on ' Optaining IP-address '.

  After that, I have been clicking through the menus a lot and hit accidentally turn off somewhere. Since then, when I try to start the virtual router, it says:

  The hosted network could not be started.

  The group or resource is not in the correct state to perform the requested operation.

  I can't find the place where I hit the turn off, and I don't know what to do more :(

  Hello

  I suggest you to see link below and check if it helps.

  WiFi/SoftAP virtual fails to start with "the hosted network could not start" on Windows 7 and Windows Server 2008 R2: http://support.microsoft.com/kb/2625519

  Hope this information is useful.

• I get an error, "Microsoft Hosted network is not available" when I try to connect wifi for my HTC desire V through the laptop.

  I use dell xps 15 laptop in which I use Wired internet.
  I want to use my computer laptop wi - fi as a hotspot to use internet on my HTC Desire V for this I'm using connectify software but when I start HotSpot Wi - FI Access Point Encrypted (WPA2) method of sharing is for me the hosted Microsoft network is not available.

  Original title: Microsoft Hosted network is not available

  I had the same problem and that's what I did on my PC Win7:

  (Forgive me if my English is not good)

  1. verification of my network hosted in my driver. I have run the administrator command prompt and type netsh wlan start hostednetwork

  If you get this message:

  The hosted network could not be started. The group or resource is not in the correct state to perform the requested operation.

  
  

  Then you have the same problem with me. It is the next step.

  2. check my driver. Type of command line: netsh wlan show pilot

  Then I saw that my support pilot hosted network. If your driver does not support hosted network, I suggest update you your driver or reinstall it.

  How FND out your driver and update: Start - Control Panel - system and safety - device (under System) Manager - ECS

  
  

  3. If your drivers support hosted network but still will not start, then the problem could be that you do not have Microsoft Virtual WiFi Miniport Adapter (the same problem happened to me). You can search and download. I tried and installed the new card.

  Now I have Microsoft Virtual WiFi Miniport Adapter under network cards, in Device Manager.

  4. I tried step 1 and it worked! So I can run my Connectify and this error message never showed even once.

  I hope this works for you also.

  Good luck

• Wi - Fi connection error: the hosted network could not be started.

  Original title: need help Urgent

  I get this error message. I'm not able to start the wifi sharing in my lenovo ideacentre desktop. I'm not able to see the microsoft wifi adapater everywhere in my office, even in the Device Manager and the adapter option Add.

  C:\Windows\System32>netsh wlan start hostednetwork
  The hosted network could not be started.
  The group or resource is not in the correct state to perform the requested operation.

  Hi Siddha,

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

• Hosted network problem in Windows 8 Pro

  my wireless network adapter supports the hostednetowork when I type in cmd netsh wlan start hostednetowrk the following text is displayed. the hosted network could not be started. the group or resource is not in the correct state to perform the requested operation. I have run windows 8 pro. Help, please.

  Name of the interface: Wi - Fi

  Pilot: TP-LINK Wireless N adapter

  Seller: TP-LINK

  Supplier: TP-LINK

  Date: 11/26/2009

  Version: 3.5.0.12

  INF file: C:\Windows\INF\oem26.inf

  Files: total 1

  C:\Windows\system32\DRIVERS\arusb_win7x.sys

  Type: Wi - Fi Native Driver

  Radio types supported: 802.11 g

  FIPS 140-2 mode supported: Yes

  802.11W protection of management framework supported: No.

  Hosted network supported: Yes

  Authentication and cipher supported in infrastructure mode:

  Open any

  Open WEP 40 bit

  Open WEP 104 bits

  WEP open

  WPA-Enterprise TKIP

  WPA-Personal TKIP

  WPA2-Enterprise TKIP

  TKIP-WPA2-Personal

  CCMP WPA-Enterprise

  CCMP WPA-Personal

  WPA2-Enterprise CCMP

  WPA2-Personal CCMP

  Authentication and cipher supported in ad - hoc mode:

  Open any

  Open WEP 40 bit

  Open WEP 104 bits

  WEP open

  Hi all

  I had this problem and I solved it.

  The solution is:

  1. go into Device Manager.

  2. click on view and then on "see the hidden devices.

  3. go down the list of devices and expand the "network devices".

  4. find an adapter with the name "Microsoft Hosted virtual network card" and then right-click on it.

  5. Select activate

  6. This will allow the AdHoc created the connection, it must appear in the network connections in the network and sharing Center, if the connection to the ad hoc network does not appear then open the elevated command prompt and apply this command "netsh wlan stop hostednetwork" without the quotes.

  7. After this, the connection should appear.

  HTH

  Anas Jalal

  Kind regards

• HP Pavilion 13-S102TU: no support hosted network

  I'm buying HP Pavilion 13-S102TU about a month ago, it does not support hosted network, I can solve it? I installed Realtek RTL8723BE 802. 11b g n drivers from the hp site, but it does not show. Please give a solution

  Name of the interface: Wi - Fi

  Driver: Intel (r) Dual Band Wireless-AC 3165
  Vendor: Intel Corporation
  Vendor: Intel
  Date: 25/02/2016
  Version: 18.40.0.9
  INF file: C:\windows\INF\oem33.inf
  Files: total 7
  C:\Intel\Wireless\Setup.exe
  C:\Intel\Wireless\setup. XML
  C:\Intel\Wireless\Data\WiFi.msi
  C:\Intel\Wireless\Data\Driver.msi
  C:\windows\system32\DRIVERS\Netwtw04.sys
  C:\windows\system32\DRIVERS\Netwfw04.dat
  C:\windows\system32\Netwuw04.dll
  Type: Wi - Fi Native Driver
  Radio types supported: 802. 11 b 802. 11 g, 802.11n, 802. 11A 802.11ac
  FIPS 140-2 mode supported: Yes
  802.11W protection of management framework supported: Yes
  Hosted network supported: No.
  Authentication and cipher supported in infrastructure mode:
  Open any
  Open WEP 40 bit
  Open WEP 104 bits
  WEP open
  WPA-Enterprise TKIP
  CCMP WPA-Enterprise
  WPA-Personal TKIP
  CCMP WPA-Personal
  WPA2-Enterprise TKIP
  WPA2-Enterprise CCMP
  TKIP-WPA2-Personal
  WPA2-Personal CCMP
  Provider defined
  Defined provider defined provider
  IHV service present: Yes
  HSI YES adapter: [00 80 86], type: [00]
  IHV extensibility DLL path: C:\windows\System32\IWMSSvc.dll
  Extensibility HSI UI ClSID: {1bf6cb2d-2ae0-4879-a7aa-a75834fbd0e3}
  Diagnosis HSI CLSID: {00000000-0000-0000-0000-000000000000}
  Supported wireless display: Yes (graphics driver: Yes, the pilot Wi - Fi: Yes)

  Hey @fa23,.

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP's Support and I wanted to tender hand for you. I understand that you have a problem with the hosted network not supported.

  Your WIFI connection works correctly for you?

  Is a hotspot?

  If your Wifi is not working properly for you, please try first to use troubleshooting wireless network and the Internet. I don't know if this applies to you, but here is a document that can help: troubleshooting wireless network and Internet (10 of Windows).

  If this answer has everything that contributed to a solution in it, please use the button accept as a Solution . If you want to say thank you, rock on, cheers or give me a five high virtual, please click the Thumbs Up icon below.

  If please repost and let me know if the Wifi works for you.

  Take care!

  Have a great day!

• Pavilion 15 ab214TX: access point does not (hosted network supported: No.) (Realtek RTl8723BE)

  I am not able to hotspot with the software or cmd. I have only checked in the Device Manager, there are no drivers "Hosted Microsoft Virtual network adapter" available. I have the latest driver for my wifi (Realtek RTl8723BE) card. Also in the cmd... supported hosted network said NO! can someone please me the latest drivers

  

  installed this version of the driver... I think it is assigned by microsoft... everything works fine now

  

• T450s: Hosted network feature not supported?

  I have a ThinkPad T450s bought in Dec 2015 with Windows 10 Pro. It has the Intel AC 7265 wireless card. I am trying to use the hosted network feature Windows to use the laptop as a hotspot for other devices, but I can't make it work.

  When I open an administrator command prompt and run "netsh wlan show drivers", the parameter ' hosted network supported:' has the value 'no '.

  I tried updating the wireless network card driver via the tool companion of Lenovo, via the Intel driver update utility and Windows via the Device Manager. The wireless driver has been updated to version 18.330.1 dated dated 05-01-2016. Then, I rebooted the machine but still no improvement. The characteristic hosted network shows as not supported. I also tried showing the devices hidden in Device Manager but under network adapters, there is no virtual card listed Microsoft hosted network.

  Is this a driver problem? Anyone with a broadcast network animated T450s as being taken in charge?

  Thank you

  Well, I found a solution on the Intel community forum: https://communities.intel.com/message/327193. A couple of users in this thread (the one with a Lenovo X 1 carbon) suggested to use an older version of 18.11 18.12 driver. So that's what I did and it worked! Here are my actual steps:

• No Edge 15 Broadcom 802.11ac none hosted network management and stability problems

  I have a new edge 15 that came with Windows 10 64-bit pre-installed. I want to be able to run the soft AP WiFi so I can connect to my wifi adapter.

  The WiFi card is a Broadcom 802.11ac and according to other computers using Dell with the same chip, but the Dell Windows 7 driver supports hosted network supports. But on my computer with the latest driver 7.35.267.0 dated 05/14/15, supported network hosted shows no., which means that the pilot and the chip does not support.

  It seems that it's a driver problem and hardware supports hosted networks.

  Also, sometimes when I turn on my computer, the WiFi does not detect the AP. It's the continuous offshore. I can get the connectivity by deactivation and reactivation of the interface. A pain. Not a big pain, but pain. Looks like the driver reload or turn on the radio after that sleep does not work properly.

  Can Lenovo if you please provide a stable driver for the Broadcom chip work.

  Thank you.

  I ended up completely reinstall windows 10 and uses the stock drivers.

  No bloat ware lenovo. Works fine now.

• I use a computer laptop xps 15 in which I want to use my computer laptop wi - fi as a bt hotspot it gives me error that Microsoft hosted network is not available

  Dell xps 15 laptop with windows 7 Home premium 64-bit
  processor Intel core i5 2.30 GHz

  Hello tejashande,

  Thank you for the question!

  It is disheartening to know that have problems you with the computer laptop wi - fi. As I understand it, you get an error that Microsoft hosted network is not available when you use the computer laptop wi - fi as a hotspot.

  I need to ask you some questions to help you best.

  1. What is the exact error message related to networks hosted?

  2. is it works much earlier?

  Download and install the Wireless driver from the link below and check.

  http://en.community.Dell.com/TechCenter/enterprise-client/w/wiki/3854.XPS-15-l521x-Windows-7-driver-cab.aspx

  Answer to us if you are having problems with a Wi - fi connection or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Microsoft Hosted network is not available (CF00100E)

  Whenever I try to start a network hosted, I get an error message like "Microsoft Hosted network is not available". Any problem with my network card. I am currently working on Windows 8 operating system. Is it possible to solve?

  Hi Rithu,

  Try these steps and check:

  a. press the Windows key + R , type Devmgmt.msc to open Device Manager.

  b. click view and press on ' see the hidden devices.

  c. go down the list of devices and expand the "network devices".

  d. find an adapter with the name "Microsoft Hosted virtual network card" and then right-click on it.

  e. Select activate

  f. This will allow the AdHoc created the connection, it must appear in the network connections in the network and sharing Center, if the connection to the ad hoc network does not appear then open the elevated command prompt and apply this command "netsh wlan stop hostednetwork" without the quotes.

  g. after that, the connection should be displayed.

• phone can't connect to hosted network Windows 8

  Original title: I'm hosted network using cmd prompt, but its worked for me only 2 times...
   
  I'm hosted network using the cmd prompt, but,.
  its worked for me only 2 times, to connect with the my mobile phone bill galaxy, now it can not connect to hosted net work, phone show me that "obtain ip addresses and remains the same,
  Another thing is under tension after my pc, I have to once again work net hosted early,
  Please help me to solve these problems, iam looking forward for your answer

  Hello

  Looks like the IP address defined on the computer is incorrect.

  Please check the IP address that is defined for the wireless network adapter.

  1 type command prompt in the Start menu and press to enter.

  2. in the command prompt, type ipconfig/all and press ENTER.

  3. This will show the IP address that is on the ethernet cards. (Cable and wireless)

  4. If you see the address from 169.xxx.xxx.xxx, then you won't be able to connect to the Internet or devices. In this case, you must manually set a static IP address for the wireless network adapter.

  5. type the following commands at the command prompt to release and renew the IP address.

  ipconfig/release

  ipdonfig / renew

  6. check if the computer is detected by the phone in wireless networks.

  If the problem persists, then set an IP address manually for wireless network.

  1. press the Windows key and press R to open the prompt to run .

  2 type ncpa.cpl and press ENTER.

  3. right click on the wireless network and click on Properties.

  4. Select IP4 (IP version 4) , and click Properties.

  5. place a checkbox "use the following IP address".

  6. set an IP address manually. For example: 192.168.1.1 and subnet 255.255.255.0

  7. Press ok and close the windows.

  8. check if the phone is able to view the computer via Wi - Fi connection.

  As hosted network is a temporary wireless connection, you may have to re-create after each reboot.

  Hope this information helps. If you have any questions, please let us know.

• hosted network problem

  Mr President.

  I use windows 8 at acer 4736, I use to set a hostednetwork using connectify for somedays, but I use it not so now I'm trying. to connect, but the State of the hosted network was not allowed and virtual pilot shows material not connected and adapter setting I have not find wifi at all the Please help me solve this problem
   

  Hello

  This article may interest you:
  http://www.thewindowsclub.com/the-hosted-network-couldn ' t be started
  Hope this helps, good luck :)

• error "could not complete the configuration of the ha agent on the host computer.". misconfiguration of the installation of the host network.

  Hola y buenos dias, he puesto 2 hots directly in una DMZ y al activar el error HA da este:

  "Unable to complete the configuration of the ha agent on the host computer.". misconfiguration of the installation of the host network.

  ESTOS son gemelos servidores y poner esta durante 2 Años last config antes han estado dentro infraestructuras en a cluster con otros 4 running perfectly. Ante nueva situation that met responsible security perimeter solo our esta posibilidad por lo as procedimos dio el a preparar los hots ante the nueva config enchufamos estos y an el swhitch of the demilitarized zone.

  Según me ha EDI el responsible of security perimeter, todo el trafico desde estos 2 hots hasta el esta allowed vCenter y asi mismo el cortafuegos responde al trafico ICMP a estos hots (este tema that he read in various Québec sites are important para el HA).

  Version of hots los Esxi 4.1.0 721871

  Me falta algo o tengo algo configurado evil?

  Important Algo a revisar?

  A greeting is gracias por adelantado

  Buenas

  Me designed that tendras 2 con 2 direcciones distintas vmkernel (lo del tema Las vlan y las tarjetas're menos ahora lo)

  Prueba has see the resolución desde el propio ESXi, prueba el uno a otro por both vmkernel ping, etc...

  A malas, saca ambos nodos del cluster y vuelve a unirlos con desactivado, cuando tengas los 2 HA, activa HA of nuevo y con eso you can smear of dudas so por el tema del VC University y UN vicio en BBDD.

  If todo esto falla, have as plantearte touch en el aam, are fairly complejo y peligroso if no to sabe hacer correctamente.