host process has stopped working for windows services

Similar Questions

• Mouse stopped working, to error '(32 Rudll) windows host process has stopped working ".

  My intelli mouse stopped working and what I get is "(32 Rudll) windows host process has stopped working" what's happened?

  Hi Stevan I am,

   

  1. for how long have you been faced with this problem?

  2. did you of recent changes on the computer?
  3 do you mean the computer crashes when you get the error?

   

  Method 1:

  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to perform a Scan SFC -

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

   

  Method 2:

  You can perform a clean boot and check if you are facing the same question to the clean boot. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service is causing the problem; referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

   

  I hope this helps.

• I always get a so-called mistake 'host process has stopped working ".

  I received a message 'host process has stopped working "," image of task has been damaged or has been tampered with', and anothermessage that said something about another process has stopped working (it starts with ss; something), I received these messages for about 2 weeks, at least. Two messages later I get when I try to join another computer to my network. Also when I try to change discovery option is discovered the first message I get all the time. How can I fix it? Or what is caiusing this?

  Hello

  1. don't you make changes to your computer before the problem?
  2 could you post back with the exact error messages?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer

  http://support.Microsoft.com/kb/940520

  Step 2:

  Put your computer in a clean boot state, and check if the problem is related to a software conflict of third parties.

  http://support.Microsoft.com/kb/929135

  Note: Restart your computer as usual by following step 7.

  Step 3:

  Also done SFC scan and check if the problem is related to missing or corrupt system files.

  http://support.Microsoft.com/kb/929833

• Host process has Sopped working and Windows will close the program...

  I get errors on the host process has stopped working and will end the program... when I open Windows Media Center on my laptop Acer 6930 G. Also I get error messages whenever I lose a web page, IE Internet Explorer closes and the problem lies...

  Hello

  Try it it will help u.

  http://www.online-tech-tips.com/computer-tips/host-process-for-Windows-services-stopped-working/

• Windows Service host process has stopped working... online and are looking for a solution

  I have a Lenove with Windows 7 Home Premium 64-bit of the system.  Yesterday I got stuck in a loop while looking for a dog boarding on Google.  I had to do a system shutdown to break out of the loop.  Since then, I get the message: «Host process for Windows services has stopped working...» "Also, I heard the music or script play twice since then and did a reboot to get rid of the problem.  I don't know that it will continue if I do not resolve what has caused the problem initially.  Also, I went into the control panel one checked all the sound icons and they are all OK.

  I'd appreciate if someone could give me some instructions on how to solve these problems.  Thank you!!

  Click on Start and open the Control Panel
  Click on System and select Advanced system settings in the left menu.
  Under performance, click settings.
  Click the Data Execution Prevention tab, then enable DEP for all programs and services except those I select.
  Select the check box next to the program that you want to turn off DEP for and then click OK.
  For older (if you want to turn off DEP for IE. Click Add: enter OS 32 bit (Internet program
  The Explorer and select iexplorer.exe) | 64 bit OS (Program Files (x 86) \Internet explore and select iexplorer.exe)
  Select the check box next to the program that you want to turn off DEP for and then click OK.
  Restart the PC and use the IE32 again
  Note: You can not set DEP to 64 bit IE

• Host process has stopped working

  I'm opening a small window saying that "Windows host process rundll32 has stopped working". When I hear this my mouse and keyboard stop working. Why I get this message and how do I stop it? I did the obvious things like changing the batteries and that did not work, but I don't know what else to do.

  Hello

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right
  Click on taskbar - task manager - take a look at stored by - Services - process -.
  It's a quick reference (if you have a small box left - show for all users, then
  Check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG then after a
  a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Objects of process Explorer - free - find out what files, registry keys and other processes
  have open, which DLLs they have loaded and more. This exceptionally effective utility will be
  even show you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity
  in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded
  automatically when Windows starts. For each request, the following information
  appears: product Type of startup (registry/Startup folder), Command - Line String,
  Name, file Version, company name, location in the registry or the file system and more.
  It allows you to easily disable or remove unwanted programs that run in your Windows
  startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not.
  The window Watcher says it all, every window created by all programs that are running, the statement
  If the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• my window vista home edition (rundll32) host process has stopped working.how to overcome this problem

  Windows vista has been giving messages: window has recovered from unexpected shutdown down and showing process (rundddl32) also host windows stopped working. Internet Explore has been blocked or does not. Please tell us the solution-thanks

  Hello

  Thank you for your response.

  I suggest you follow the steps from the link; It will help you solve the problem.

  Method 1: An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer: http://support.microsoft.com/kb/940520

  Method 2: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 3: If this is a recent problem, then you can try a system restore and check if it helps.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can see the following link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Please perform these steps provided recommended and post back if you still have the problem.

  Hope this information is useful.

• Windows Shell common Dll does not respond and the Windows Rundll32 host process has stopped working

  I got two errors above and try to solve them without my success. My computer is slow, and several programs say "not responding" for a while until what they caught finally upward.  It seems that I have a driver problem. Any advice?

  Hello riondet,.

  Thank you for using the Microsoft Windows Vista Forums.

  How long did you receive these error messages?   Did you change your operating system before thses errors?  All new software/hardware installed or new Windows updates?

  It seems that a dll is missing. You can fix it easily if you have a vista bootable disk.  Just boot from the disk and click on repair your computer and then click on start option repair and it will do the rest.

  or, if the problem is not resolved, then insert the vista dvd and then open the command prompt as administrator, and then run the following command...

  C:\sfc scannow

  and then press ENTER.

  Please let us know status.  Thank you! Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Catalyst Control Centre: host application has stopped working Windows xp prefessional

  Catalyst Control Centre: host application has stopped working Windows xp prefessional. ididnt get what do that means.

  Catalyst Control Center is a Radeon video card component. I recommend that you go into Add/Remove programs and uninstall. Once you have uninstalled it click HERE to download and enable the parser should automatically detect and install the appropriate driver. If the installation of the latest version does not resolve the problem, you should scan your computer for malware using Malwarebytes. Make sure that you update the parser prior to analysis.

• Fax for Windows & scan has stopped working for me.

  Fax for Windows & scan has stopped working for me. I analyze the documents on there all the time and it just stopped working gives me an error message indicating "a problem prevented the document under analysis. Please try again, or to correct this information, see Help and Support or the documentation that came with the scanner. "However, the problem is not the scanner, because it works with a colleague's computer, and the scanner does not work with mine either. It is a problem with the Windows fax and scan. We have tried several things and nothing works. Help, please!

  Hi KristinVeltema,

  To resolve this problem, you must download and install windows vista service pack 2 on the computer.

  Learn how to install Windows Vista Service Pack 2 (SP2)

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  See the link below for more information:

  
  Error message when you try to import an image from a scanner by using "Windows Fax and Scan" or by using the Windows Photo Gallery in Windows Vista SP1: "a problem prevented the document under analysis.

  http://support.Microsoft.com/kb/953253

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I fix windows 7 Catalyst control center host application has stopped working

  I received the error: Catalyst Control Centre: host application has stopped working. I uninstalled the Device Manager Catalyst Control Center and restarted - after uninstall and reboot I got the same message saying: Catalyst Control Center: the host application has stopped working - I also checked for driver updates in the Device Manager and the device manager says my driver updates are up-to-date.

  I just received a response from AMD for a known issue with Catalyst Control Center and Windows 7.  You can go there.  It worked for me the first time after a lot of troubleshooting.

  How to solve the CCC is not loading/opening at initialization.

  Scenario: the user tries to open/load the CCC through different methods, but it does not load. The problem may occur without any changes to the system or a Catalyst driver update or reinstall. This is issue mainly affects Windows 7 machines.

  Cause: possible corruption of the Windows Global Assembly Cache (GAC). Usually, this requires the user to format and reinstall Windows.

  Resolution: this solution has been tested - reproduced and resolved.

  Remove all the ATI through programs and features in Control Panel using the Manager to install Catalyst (GPC). Restart the system in safe mode and follow these steps:

  -Remove all ATI C:\programs files files and the C:\programs files (x 86)

  -Go to the C:\Windows\assembly and sort by "public key token. Locate the following key token public "90ba9c70f846762e" which is

  -associated with ATI. Usually only 2 entries. Remove 2 entries. Note: entries should be deleted (right click and select uninstall) since regular safe mode

  -mode may cause a permissions error. 2 entries appear only in the systems concerned by this issue. This means that you want the 2 inputs on systems where the CCC charges, the entries do not exist.

  -Close and restart normally.

  -Reinstall the ATI Catalyst package.

  I hope that you will get in working order!

• Error when you try to use VoIPBuster to place VoIP calls: Client for VoIP calls has stopped working. Windows is checking for a solution to the problem.

  Client to make VoIP calls

  I recently started having problems, make VoIP calls from my computer.  I use VoIP Busters (and using it for a few years without any problems).  Evertime I try to call the destination phone rings a couple of times and then stop.  The next thing that happens is an error message that says: "Client for VoIP calls has stopped working.  Windows is checking for a solution to the problem.  It is followed by another screen that says: "a problem caused blocking the program working properly."  Windows will close the program and inform you is a solution available. "  Nothing happens.  How to overcome this problem.

  I finally had to resort to the re-installation of Windows.  This solves the problem.  But don't forget to back up your computer and email address / addresses before you do.

• Skype has stopped working and windows is looking for a solution.

  original title: problem with Skype

  I have been using Skype on my laptop for 12 months with no problems, all of a sudden, I get a message that Skype has stopped working and windows is looking for a solution.  I checked my firewall, windows updates and downloaded Direct X, as suggested by Skype. I've uninstalled Skype and downloaded again to make sure that the version lasted. IHAVE had also my whole system recharged but it did not work. I am at a loss to know what to do next. Someone at - it ideas

  Hello
  
  It is a possibility that a third-party application is causing the conflict with Skype. We can perform the clean boot troubleshooting and check which program is causing the conflict.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Microsoft Flight Simulator has stopped working. Windows is looking for a solution to the problem

  Original title: games

  When I start my X Microsoft Flight Simulator (Deluxe Edition), it is running propely for some time (15 to 20 minutes) that it no longer works and gives me a message "Microsoft Flight Simulator has stopped working. Windows is looking for a solution to the problem"and he have me to close the program. (I have Windows 7)

  Help, please. :)

  I just "uninstalled" pack of the accelerator, and it worked fine.

• "License for this product has stopped working" CS3 Windows 8.1

  I used CS3 without problems so far. I have not changed anything, and now when I launch Illustrator, InDesign, Photoshop and DreamWeaver, I get this error.

  Running Windows 8.1

  Creative Suite 3

  Windows 8.1 does not include the instructions that I found

  Error: "License has stopped working". Windows

  Before, when I had to reinstall the software, serial number did not because I install more than the allotted time. I called Adobe and they solve the problem. If I have to reinstall again, is there a phone number I can call? I can't find one on the Adobe Web site.

  Thanks for any comment on this issue. I appreciate all help.

  When you have a non-functional computer and cannot turn off

  Don't forget to request ONLY activation support set your number of activations

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990