Host process has stopped working

Similar Questions

• I always get a so-called mistake 'host process has stopped working ".

  I received a message 'host process has stopped working "," image of task has been damaged or has been tampered with', and anothermessage that said something about another process has stopped working (it starts with ss; something), I received these messages for about 2 weeks, at least. Two messages later I get when I try to join another computer to my network. Also when I try to change discovery option is discovered the first message I get all the time. How can I fix it? Or what is caiusing this?

  Hello

  1. don't you make changes to your computer before the problem?
  2 could you post back with the exact error messages?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer

  http://support.Microsoft.com/kb/940520

  Step 2:

  Put your computer in a clean boot state, and check if the problem is related to a software conflict of third parties.

  http://support.Microsoft.com/kb/929135

  Note: Restart your computer as usual by following step 7.

  Step 3:

  Also done SFC scan and check if the problem is related to missing or corrupt system files.

  http://support.Microsoft.com/kb/929833

• Mouse stopped working, to error '(32 Rudll) windows host process has stopped working ".

  My intelli mouse stopped working and what I get is "(32 Rudll) windows host process has stopped working" what's happened?

  Hi Stevan I am,

   

  1. for how long have you been faced with this problem?

  2. did you of recent changes on the computer?
  3 do you mean the computer crashes when you get the error?

   

  Method 1:

  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to perform a Scan SFC -

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

   

  Method 2:

  You can perform a clean boot and check if you are facing the same question to the clean boot. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service is causing the problem; referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

   

  I hope this helps.

• host process has stopped working for windows services

  my host process for windows services has stopped working please could you find me a solution please

  Hi joottley,

  ·         Exactly when you receive the error message?

  ·         Did you the latest changes on the computer?

  I suggest you try the methods below and check if it helps.

  Method 1: Put the computer in a clean boot State, and if the problem persists.

  Note: After the clean boot troubleshooting, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Method 2: If the problem persists in safe mode, then check the observer after return with details and events for the cause.

  What are the information in event logs? (Event Viewer)

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  See the Microsoft article below and install them updated if the problem occurred after you download updates from Windows Updates.

  An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer

  http://support.Microsoft.com/kb/940520/

• Windows Service host process has stopped working... online and are looking for a solution

  I have a Lenove with Windows 7 Home Premium 64-bit of the system.  Yesterday I got stuck in a loop while looking for a dog boarding on Google.  I had to do a system shutdown to break out of the loop.  Since then, I get the message: «Host process for Windows services has stopped working...» "Also, I heard the music or script play twice since then and did a reboot to get rid of the problem.  I don't know that it will continue if I do not resolve what has caused the problem initially.  Also, I went into the control panel one checked all the sound icons and they are all OK.

  I'd appreciate if someone could give me some instructions on how to solve these problems.  Thank you!!

  Click on Start and open the Control Panel
  Click on System and select Advanced system settings in the left menu.
  Under performance, click settings.
  Click the Data Execution Prevention tab, then enable DEP for all programs and services except those I select.
  Select the check box next to the program that you want to turn off DEP for and then click OK.
  For older (if you want to turn off DEP for IE. Click Add: enter OS 32 bit (Internet program
  The Explorer and select iexplorer.exe) | 64 bit OS (Program Files (x 86) \Internet explore and select iexplorer.exe)
  Select the check box next to the program that you want to turn off DEP for and then click OK.
  Restart the PC and use the IE32 again
  Note: You can not set DEP to 64 bit IE

• my window vista home edition (rundll32) host process has stopped working.how to overcome this problem

  Windows vista has been giving messages: window has recovered from unexpected shutdown down and showing process (rundddl32) also host windows stopped working. Internet Explore has been blocked or does not. Please tell us the solution-thanks

  Hello

  Thank you for your response.

  I suggest you follow the steps from the link; It will help you solve the problem.

  Method 1: An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer: http://support.microsoft.com/kb/940520

  Method 2: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 3: If this is a recent problem, then you can try a system restore and check if it helps.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can see the following link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Please perform these steps provided recommended and post back if you still have the problem.

  Hope this information is useful.

• Windows Shell common Dll does not respond and the Windows Rundll32 host process has stopped working

  I got two errors above and try to solve them without my success. My computer is slow, and several programs say "not responding" for a while until what they caught finally upward.  It seems that I have a driver problem. Any advice?

  Hello riondet,.

  Thank you for using the Microsoft Windows Vista Forums.

  How long did you receive these error messages?   Did you change your operating system before thses errors?  All new software/hardware installed or new Windows updates?

  It seems that a dll is missing. You can fix it easily if you have a vista bootable disk.  Just boot from the disk and click on repair your computer and then click on start option repair and it will do the rest.

  or, if the problem is not resolved, then insert the vista dvd and then open the command prompt as administrator, and then run the following command...

  C:\sfc scannow

  and then press ENTER.

  Please let us know status.  Thank you! Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Host process has Sopped working and Windows will close the program...

  I get errors on the host process has stopped working and will end the program... when I open Windows Media Center on my laptop Acer 6930 G. Also I get error messages whenever I lose a web page, IE Internet Explorer closes and the problem lies...

  Hello

  Try it it will help u.

  http://www.online-tech-tips.com/computer-tips/host-process-for-Windows-services-stopped-working/

• Why my Catalyst Center: the host application has stopped working?

  When I log on my computer, a window opens in two separate occasions stating that Catalyst Center: the host application has stopped working... How can this be repaired?

  Hi Missy,

  This probably isn't a problem MSE or malware.  It could be a problem with the video software (which is otherwise commonly) and I have it on my system as well for my ATI graphics card.

  This just started recently - as the last day or more?  If so, try a system restore to before it started to see if that helps. If you use Windows 7, seehttp://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, seehttp://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, seehttp://support.microsoft.com/kb/306084. Sometimes this simple process made the rounds and sometimes that doesn't help - but it is easy and worth if she has recently begun.

  Good luck!

  Kosh

• Satellite L500D-144 - CCC of the host Application has stopped working

  Ladies and gentlemen,

  My PSLT6E - 007004GR is almost a year.
  This month, there was an update - possibly to leave Microsoft - and since then popt always at startup in Windows 7 this window and look for solutions:
  Catalyst Control Center. The host Application has stopped working, it is looking for a solution.

  A new installation of the driver graphics card and Catalyst Control Center has not changed. Instead, a standard Microsoft graphics card driver is installed.
  Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
  Is it reproducible.

  Have already reported more customers or I'm the first?

  What can you do to the problem?

  Sincerely,

  CBluebaerchen

  Hello

  > Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
  To do this the display of Windows Update driver update?

  If so, restore the system to an earlier point and disable this update of the display driver and choose only the updates of Windows. That s enough.

  Otherwise, you can try running CCleaner. It can clean and fix registry problems.

• Want to m6: Catalyst Control Centre: host application has stopped working

  Whenever I start my computer, I get the following message every time that a few months:

  "Catalyst Control Centre: host application has stopped working".

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  Please how can I get rid of this or get whatever the problem is solved?

  Thank you.

  Hello

  Try to use Recovery Manager to reinstall your original graphic AMD software package - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

  Recovery Manager - Windows 8.

  Recovery Manager - Windows 7

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• Issue of satellite A300 Catalyst Control Centre - host application has stopped working

  At startup, and whenever I try to open the Catalyst Control Center, Windows displays the error message ' Catalyst Control Centre: host application has stopped working ".

  Has anyone else with similar problems.
  I tried to reinstall the drivers on the toshiba site, and install the new drivers on the ATI site and all I could think about. Given that the two pilots do not work im not able to exceed the resolution 1024 x 768.

  Any suggestions?

  Hello

  I googled for this error message and found many people having this problem.
  It s not related to the laptop, but for the driver
  Who knows why.

  In any case, in most cases the people solved this problem by the new driver Catalyst installation.
  You should do this;

  -upgrade your Vista to the last State
  -remove the old system catalyst
  remove/uninstall the graphics since the device manager driver
  -Restart the computer and reinstall the driver and catalyst

  Should work!

• Catalyst Control Center host Application has stopped working

  I get this promt twice when I start the computer. I tried something that has been recommended who was clicking on tools in CCleaner and see if it was on the list that he was. I deleted it then as recommended but the guests still appear.

  Check these related discussions

  Catalyst Control Centre: host application has stopped working - Windows 7 Pro
  Catalyst Control Centre: host application has stopped working disk failure / hard
  Catalyst Control Centre: host application has stopped working
  Catalyst Control Centre: host application has stopped working
  Catalyst Control Center has stopped working: the Application host

• Catalyst Control Centre: host application has stopped working Windows xp prefessional

  Catalyst Control Centre: host application has stopped working Windows xp prefessional. ididnt get what do that means.

  Catalyst Control Center is a Radeon video card component. I recommend that you go into Add/Remove programs and uninstall. Once you have uninstalled it click HERE to download and enable the parser should automatically detect and install the appropriate driver. If the installation of the latest version does not resolve the problem, you should scan your computer for malware using Malwarebytes. Make sure that you update the parser prior to analysis.

• using win vista sp2 64-bit overpriced home, the catalyst control center host application has stopped working

  Using windows VISTA Home overcharging sp2 64-bit, the catalyst control center host application has stopped working

  Hello

  You will need to download the correct drivers for the graphics card. You can also contact the manufacturer for assistance on this issue.

  Support for drivers &

  http://support.AMD.com/us/pages/AMDSupportHub.aspx