Hot KB969897 difficulty installed once downloaded by Windows Update. I need to install this fix.

Similar Questions

• Recently, I installed Microsoft Works 9, and now I have trouble to download the Windows Update update of security for Microsoft Works 9 (KB967044). I am getting error 646. What is a network problem? ___

  Recently, I installed Microsoft Works 9, and now I have trouble to download the Windows Update update of security for Microsoft Works 9 (KB967044). I am getting error 646. What is a network problem?
  I have also recently set up a wireless network.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.

• Error 80246008 when downloading from Windows update

  Original title: I get Windows Update error 80246008 and can not download updates.  Microsoft fix - it identified the problem, but did not solve.   Windows Vista Home premium.

  I use a dell inspiron age of 4 years.  Have had problems with Windows Update several times lately.    Microsoft Fix It has been able to solve it once (only after executing it 3 times), but not until today.  Don't know what to do.

  Hi Joy,

  If you receive the Windows Update 80246008 error when downloading updates, you might need to change the (BITS) Background Intelligent Transfer Service or the Windows event log service settings and restart each service.

  I suggest you to go through these websites and check if it helps.

  Windows Update error 80246008

  http://Windows.Microsoft.com/is-is/Windows-Vista/Windows-Update-error-80246008

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.

  http://support.Microsoft.com/kb/956706

  Hope this information is useful.

• When I go to download the windows updates, it just keeps popping up "Try Again".

  When I go to download the windows updates, it just keeps popping up "Try Again".

  How to ask a question:
  http://support.Microsoft.com/kb/555375

  and/or

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/

• I bought Photoshop elements 14 for my mac, but was sent to a download of windows. How can I change this?

  I bought Photoshop elements 14 for my mac, but was sent to a download of windows. How can I change this?

  Please contact support and ask for an Exchange.  They should be able to provide one without penalty or loss of the ability to change platform in the future.  This seems to happen too often a mistake of the buyer.

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Get help from cat with orders, refunds and exchanges (non - CC)
  http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

• I can download all windows updates, but my system will not configure and install them. I have Vista, what happens?

  nfkgjaLRjh:KF'e; ktg; B; love my lifeE

  Hello

  Do you get any error messages? More detail of what is happening and noted that allows us to help you.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:
  
  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Lack of Windows install is not allowing me to download my Windows updates...?

  My Windows updates are not download... message that the Windows Installer Service is missing... where to find Windows Installer to download on my Vista Premium 32-bit... I tried to download the Windows Installer 4.5 Redistributable but keep receiving the message that the program needs elevation... Please help me...

  Connie

  Try the toll of preparation of system update at the following link.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool

  Download the tool for your version of Vista is 32-bit or 64-bit

• Updates fail to download using Windows Update

  I am running Windows XP Professional Sp3 and when you use Windows Update its identifies I need 88 critical updates. I confirm that I am reuqire to install but they constantly fail to download.

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application already installed on this machine?

  3. do you have a Norton or a trial of free McAfee come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  =======================

  You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072EE2; 0x80072EE7; 0xC80003FA; 0x8024402F] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  -Online skip the section to APPLY to if Win7; Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart [1]
  http://support.Microsoft.com/kb/971058

  ~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• REPEAT THE DOWNLOAD VIA WINDOWS UPDATE

  HI HI! Last week, I noticed that the Windows Update icon continues to show I have a new critical update to be installed. I'll go ahead and make this facility, it strengthens its registry backup and it will say it is successful and if you look in the history of successful downloads it will show there as well for all the times I've downloaded it, BUT when the PC is restarted, the icon will be back once again or sometimes in only a few minutes after that the first case was allegedly downloaded. Update is Windows Malicious Software Removal Tool - December 2009 (KB890830. So far, I have 7 different instances of the same download the update history. I'm using Windows Vista Ultimate, Service Pack 2. I used malwarebytes and SUPERAntispyware to scan the PC and it found no infection. I have AVG Internet Security 9.0 as my anti-virus and firewall. BTW * I noticed my PC is much more slow and made windows Explorer freezes which prompted me to think about an infection, but nothing is found *.

  A last round in my bag:

  Uninstall AVG Free 9.0 & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.

  Why you don't need your anti-virus to scan your email
       http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When I try to download the Windows updates, getting errror 802460208

  I'm offered update, but whenever I try to upload the error message will appear. I download repair fix, it says that I need to repair the windows update component. I try to go to the Services but I can't locate the BITS. Help, please.

  Hello

  1. what Fixit did you use for the repair?
  2. What is the full error message?
   
  Method 1:
  Perform a clean boot and then try to install the updates. Check out the link and follow the steps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once the diagnosis is made, follow step 7 of section to configure the computer to start the Normal start.

  Method 2:
  Check out the link and follow the steps.
  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   

• Driver HP Deskjet 3745 not downloadable via Windows Update in Windows 7.

  Dear Sir / Madam,.

  I use a HP Deskjet 3745 now for several years at home. Recently I got a new laptop from my employer with Windows 7. I would like to install the driver for my printeron this laptop, so I can also print at home. Unfortunately, the update of windows is managed by my employer, if I can't download the software via Windows update.

  Is there another way to get this driver?

  With sincere friendships.

  Martin

  The driver can be downloaded from the Microsoft catalog Site, but the site is not very user-friendly.  The catalog site supports Internet Explorer, other browsers will not work.  Copy this link and paste it in IE: http://catalog.update.microsoft.com/v7/site/Search.aspx?q=deskjet%203740

  You have an 32-bit or the 64 bit version of Windows 7?  The 32-bit driver is one that is 11.4 MB in size, the 64-bit version is 11.6 Mb in size. 13.9 MB system is for Server IA64 systems.  Once the file has been downloaded, open a DOS command prompt and change directory to the location where the file was downloaded.  Then insert your USB key (I'll assume it's the X: drive in what follows) and in the BACK of the box type the following:

  Expand * .cab-F: * x:\

  This will extract the files and develop on your X: drive.  You can then take the USB drive to your work machine and start, devices and printers, click Add a printer, have a disk and point to the INF on drive X:.

• After win7sp1 clean install on a new hard drive, Windows Update runs forever - have tried MANY fixes

  April 2, 2016

  For several days, I have reproduced this problem by starting with a W7Sp1 drive and also start with a considerably older drive of W7.  The old installation of W7 is going very well, first run of WUpdate receives a few fixes, apply and restart.  Rerun WUpdate and she finds Sp1.  Installation of Sp1.  Rerun Wupdate and it says to upgrade to a new Wupdate.

  After the SP1 update and the new windows update, this system offers the same WUpdate symptoms as if from the W7Sp1 disk.  Immediately after the installation of the drive, run the wupdate.  He said: it must be updated to a new Wupdate.

  (PS in each Installer Win7, I authenticated the product key and activated windows.)

  After that, Windows Update never runs you want fixed.  (Left running 10 hours overnight).

  (NO OTHER programs or anything like that is installed after installing Win7 and starting with Windows Update problems).

  =============================================================

  I found 2 programs: FixitAllUp.

  http://support.microsoft.com/kb/971058 - downloading "MicrosoftFixit.wu.MATSKB.Run". (Chasing a "minimal boot"). The last time I have raced, he said if found 2 problems, but only fixed a.  I hit the button Details where he says that he finds the same 2 problems and fixed them BOTH.  It corrects "Missing or damaged registration Service" he said: he can't solve 'Installation problems of the recent updates' - but when you hit details it button show both under "green checkmark" FIXED.  (I also tried to run this several times, and he always finds and he said exactly the same thing, as did the first round).

  Also have run "WindowsUpdateDiagnostic" downloaded from the microsoft site.  It's the same notes 2 problems and fixed one or both depending on if you are looking the summary or detail.

  I read many many cases of a problem that dates back to 2011 and with various assumptions for this problem.

  AND YET, Windows Update checks the updates for EVER and EVER.

  Help

  There is a solution and it works very well...

  Windows Update problem (new)

  The following procedure applies in the case of installation (reinstall) Windows 7.  It does not apply to a usual, normal day.

  I'm afraid that you will do the reinstall again.  Not a terrible penalty to pay.  Usually takes less than an hour.  Then immediately proceed to the next procedure.   It's strange, but it really does work and many people have proved it.

  NEVER install anything other than Windows updates until your system is up-to-date.  Once you have the list update, install all together.  Installation of updates in batches is not expedite the process or do better.

  1. Before you begin to re - install, download (32 or 64 bit) KB3083710 and KB3102810 in advance and store on a USB
  2. Start and end the re - install Windows 7 SP1
  3. Before that the newly installed system can go online for the first time, Disconnect the computer from the Internet.  This chronology is essential.  The system should NOT have access to the Internet when it starts.
  4. Install KB3083710 and reboot manually.
  5. Install KB3102810 and reboot manually.
  6. Restore the Internet connection, and run Windows Update as usual.
  7. After a few minutes, you should have a lot of updates to download and install.

  Thanks to Ken Morely

• Delete files from downloaded on Windows Update

  I use FF 32, and I don't want to update 33 FF. The update has already been downloaded. How can I delete the update files and turn off the dialogue "Install updates"?

  Windows 7 64 b

  Try changing the settings of update to 'never '. Although, I don't see why so many people have problems with keeping browsers updated. Updates solve problems, add features and fix the security risks!

• SoniX - streaming media and broadcast - YooStar camera got downloaded from WINDOWS UPDATE through MICROSOFT

  I friggin do not know if this is a real update... I think it's a fake but its on my system and can not get rid of it. I did a system restore to an earlier date and its always there, so this is a spyware crap that needs to be taken out of microsoft windows operating system. If this is not true then please someone Microsoft please invite you to my computer and look for yourself. Who has heard of an update of the program called youstar by sonix camera?

  I feel my system is compromised and WINDOWS UPDATE is fracked if it contained in this new trojan spyware virus whatever being downloaded in this way. SOUNDS DANGEROUS TO me.. .Please help!

  On my windows update page it reads this with other optional updates.

  "Sonix - running and broadcast media - YooStar camera.

  Download size: 4.8 MB

  You may have to restart your computer for this update is taken into account.

  Update type: recommended

  SoniX Streaming Media and software distribution updated June 2009

  More information:
  http://winqual.Microsoft.com/support/?DriverID=20283737

  Help and Support:
  http://support.Microsoft.com/select/?target=hub

  I can't imagine how MICROSOFT is allowing us to download this tool which is probably a bug or another infection, but the way we think that we are Microsoft download is not Microsoft.

  MICROSOFT SOFTWARE ENGINEERS, you can call me to remedy this situation and go to the heart of this new problem. Of course sounds like a chineese bug. Who has heard of a device called YOOSTAR CAMERA?

  RobertSaikaley

  Try to do the following

  1 disconnect Internet completely until told to reconnect
  2. go to the device, imaging devices Manager, select the Sonix Webcam device and choose to uninstall the driver, without forgetting to select [] delete the driver for this device
  3. restart the system and allow it to install the Microsoft Inbox driver
  4. go to control panel, Classic view, Windows Update and change the setting/configuration, Opt to download only the updates, but do NOT install, let me decide
  5. connect to the Internet and then go to Windows Update windowsupdate.microsoft.com
  6. check updates and click on update driver option
  7. RIGHT mouse click on the Sonix webcam driver and opt to hide the update, and then click OK
  8 return to Windows Update and opt-in settings on the automatic updates and the recommended updates
  9 Windows Update will never ask you to install this new driver

  Also, if you have Windows Live Messenger installed, go to Tools/Options, Sign In and check the box automatically connect to Windows Live Messenger when I log in to Windows

  Restart the system and see if the webcam is working normally

• I am running windows 7 64 bit, I get #8020053 and #80070570 error while trying to update using the automatic download of windows update system I have 28 updates that don't is not loading.

  I have tried to change the clock, several computer reboots, software antivirus removal, (after running to make sure that there are no viruses etc.)

  Is this a sudden, new problem?

  Makes you upgrade to Win7, or is this a brand new computer?

  What application or anti-virus security suite is (was?) installed and is (was) your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  The foregoing despite...

  How to reset the Windows Update components?
  [Skip the section will APPLY to & run the difficulty in the default and aggressive modes]
  http://support.Microsoft.com/kb/971058

  -NB: online access KB971058 via IE8 32 bit, not any other browser.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft