Hotmail does not play back, today lost all my messages on the Omnia 7

Similar Questions

• Video does not play back. Clips are blacking out.

  Not sure why my videos don't play back in the Viewer. Audio seems to be well - all of this. Some clips are "dead".  It has not been done until I stopped and restarted.  I stopped him because some clips were black in the clip project tree, while the timeline plays very well.  After stopping and restarting the computer, the clip project browser is a little better, BUT my calendar was wrong.

  Here's a video to see my videos and what's going on:

  https://youtu.be/HE6ni1Frka0

  I would try first choice of deletion, then eliminate all make files.

• LIGHTROOM6 CC 2015 2 UPDATED VERSION DOES NOT ALLOW UPLOAD CHOICES & is ALLE UPLOAD DIRECTLY to THE LAST SETTING

  I HAVE DOWNLOAD PROBLEMS.  I have a MacBook Air and recently updated to 2015 2 version and I checked 'Show add photos screen' in the preferences as suggested to stop it crashing.  Still, it breaks down or could not load several times, but less frequently.  What struck me the most upset is it does not show the choice of the right hand before downloading and just uploaded immediately.  He has not shown me the destination drive or he asked me first what format I want to use (for example to date before the number of the image), and only allows put me in key words first before hitting the import button.  It is a big problem that I don't see where he's going.  Fortunately photo files went to the last location that I used.  It is not acceptable that I can use a second external drive in the near future so I don't want to order the photos to go to a different place and NOT the last I used!  Let me know when you all these difficulty.  Adobe, you messed up of course upload!

  Hello Susi,

  Lightroom allows you to choose the destination at the time of importation, however, the structure of the hierarchy for destination has been removed from the last update.

  And you can put the keywords before importing

  Here is a screenshot:

  

• When I load a piece, or the movie disc wmp does not play automatically. It was, how do I get that back

  WMP does not play automatically when a disc is inserted. How to bring back this feature

  Hi billsinor,

  1. did you of recent changes on the computer?

  2. what happens when you insert a disc in the drive?

  See the Microsoft article below and try the steps mentioned, check if it helps.

  The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  http://support.Microsoft.com/kb/330135

• Windows 7 does not play Audio or Audio files into video files

  I recently had trouble with my permissions of file being messed up because of a bad Windows Update and after to find most of my problems and access to almost everything I find I can't play audio files such as mp3 or wav in any player (Winamp, iTunes, etc.) or have game audio while watching a video file (I tried VLC).

  The strange thing is that audio plays very well while doing something in my web browser, Google Chrome, and I can even open the mp3s in Chrome and have them play. When I try to open an audio file in Windows Media Player, I get an error C00D11B1, else hangs the program or does not play at all, the timer remains at 0. I tried to recharge my programs, codecs and drivers, but to no avail. System Restore is not an option I lost somehow those I had over the screw up that changed my permissions.

  Any help or ideas would be very appreciated.

  Solved here...

  Windows Media Player C00D11B1 - Microsoft Community error code
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-Media-Player-error-code-C00D11B1/4a80bfc9-c849-49ff-8AF3-96efcf0867af

  And if it does not help, Vivian Xing [MSFT] another method.

  Windows Media Player 12 error C00D11B1 problem
  http://social.technet.Microsoft.com/forums/Windows/en-us/e3fc642b-d4db-4DEB-bba3-dc239ae684c0/Windows-Media-Player-12-error-C00D11B1-problem?Forum=w7itpromedia

• Does not play his helmet

  Yesterday my computer worked fine. I was listening to music through my headphones. So, today he did not play sound via the headphones. I tried to do everything. I clicked on all that existed. I configured the speakers. I checked if it was cut, which was not the problem. I need help! Sound does not play through the headphones.

  Hi Andie,

  Could you let us know if you have tried to connect a different listener to the computer?

  I suggest you to set the headset as default device to read the audio data and check.
  a. on the start screen of Windows 8 press the Windows key + X key on the keyboard, then on Control Panel , then hardware and sound.

  b. click on the its. Select the playback tab, right-click in the window and check the Show Disabled devices.
  c. now check if the headphones are listed and do a right click on it and Choose Activate.

  d. Select this headset, and then click set as default.

  Reference:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know if you have any additional questions.

• Audio does not play when you press the arrow keys.

  Hello

  When I'm working on a project and I press the left or right side of the keyboard arrow keys to move a picture in the timeline, the audio does not play.

  He used to play and also appear in the audiometer as a level, but recently he has ceased to be. Maybe it was because of an update?

  Is it possible to turn it back on? Maybe I hit a button by accident and disabled the function.

  If it is due to an update, is there a way to revert to a previous version?

  Looking forward to you soon.

  Thank you for your time and help in advance.

  All the best

  George

  Mac OS X El Capitan 10.11.1

  iMac 27 inches, end of 2013

  Processor Intel Core i7 3.5GHz

  16GB 1600 MHz DDR3 memory

  NVIDIA GeForce GTX 780M 4096MB graphics

  First Pro CC 2015.1

  9.1.0 (version 174)

  Please let me know if you need more information and I will be happy to provide it.

  Try pressing SHIFT + S, which is the shortcut for "toggle Audio while Scrubbing."

• HPa1519h Pavilion Media Center does not play audio

  I bought a HP Pavilion of a1518h with a sweet WinXP Media Center Edition 2005 from someone, and it does not play the audio files. I noticed, the called program manager of sound effects is not found, and also, I do not see any what PCI sound card to come with him despite all the buttons mute and volume on his keyboard. If I chose the control panel / sounds and Audio devices, volume is just not said 'No audio device' now. Hmmm.

  I buy a sound card M-Audio 2496 since to use its MIDI in / out, but audio in/out-wise, I still prefer to use the resources of the HP (if I can get them work), so that I can plug both cables in the HP front and rear outputs stereo, and, more important still, the computer reacts to the volume buttons and mute the keyboard. (2496 card does not work). Could someone give advice what Miss me exactly and how do I proceedto back the sound capabilities of the HP?

  I tried to use HP application recovery to see if I can restore sound effect Manager, but he has not been listed as a recoverable application / choice of the driver. I tried to restore XP to an earlier date (maybe?), but the system restore reported that is not possible. I do not have a Windows HP disk, but XP is installed in a 10 gig recovery partition. I tried to locate a Setup program the sound effect Manager on this partition and my recovery of HP DVD system without success. Where should I go from here?

  This document from hp should help:

  http://support.HP.com/us-en/document/c01427349

  If this does not help, try the procedure described in this doc:

  http://support.HP.com/us-en/document/bph07154

  Let us know how it goes.

• Looping FLV does not play when I use addChild

  Hi all

  Kglad wrote the code below (located in a frame of a clip to child script). It works very well to seamless loop the FLV in an FLVPlayback component in this clip.

  In the main timeline, I use removeChild to remove this clip of film when it was used. Can I use addChild to add at the time where the clip must be used/seen again. (I do it to preserve the resources of the machine).

  However, when I use addChild to add the MC back, for some reason, it does not immediately play like the first time it times. He expects a cycle before it begins to play again. Does anyone know why it does not play the moment where it is added in? ('Auto play' is checked in the FLVPlayback properties.) I can post more code if necessary.

  Thank you very much!

  The code in the script of the frame of the child clip that holds the FLVPlayback:

  Fl.video import. *;
  
  FLV animation loop
  var int index = 0;
  childMovieClip.addEventListener (fl.video.VideoEvent.COMPLETE, completeHandler);
  childMovieClip.source = "FroggyTop.flv";
  childMovieClip.play ();
  readyNextPlayerF();
  
  function completeHandler (e: fl.video.VideoEvent): void
  {
  childMovieClip.play ();
  childMovieClip.visibleVideoPlayerIndex = index;
  readyNextPlayerF();
  }
  
  

  function readyNextPlayerF (): void
  {
  index ++;
  childMovieClip.activeVideoPlayerIndex = index;
  childMovieClip.source = "FroggyTop.flv"; assign the source

  }

  Post edited by: paul_james123

  The game of the FLVPlayback instance is not dictated by its presence as a child.  Using addChild does not reset it to a starting state.  If you remove it, it remains to do everything what is done out of sight of the scene.  When you add to this is probably in the middle of everything he did while sitting in its limbo deleted.  When you remove it, you should stop it, and when you add it back in you should start it.

• For the second time in two months, all my messages in the Inbox are not there. Only the SUBJECT and the FROM is left. Tried to 'fix this folder' and lost ALL

  For the second time in two months, all my messages in the Inbox are not there. Only the SUBJECT and the FROM is left.

  Tried to 'fix this folder' and ALL - lost ALL the Inbox.

  The file is still there and works well...

  How can I stop it and what are the causes?

  Thank you all, Gabe

  If you have the file somewhere on your hard drive, export and import tools it will be important back to Thunderbird.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

  Instructions http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html

• I made a backup once, but I lost everything, but not know I need how to restore all my message of the whatspp from the beginning

  I made a backup once, but I lost everything, but not know I need how to restore all my message of the whatspp since the beginning thank you

  < re-titled by host >

  IF you have lost the backup iPhone info WhatsApp went as well. WhatsApp does not keep the conversations in the cloud, only on your phone.

• Hotmail does not properly in Firefox

  Hey people,

  This morning I can't open any messages or folders in Hotmail. It was working fine last night. Everything looks like normal (although I noticed that ads on the side load is no longer?) and messages appear in my Inbox as usual. However, if I click on messages in the Inbox or you try to select another folder on the left, there is no error messages or pop-up windows, everything that happens is literally nothing. The message looks like it is selected in the Inbox link when I click on it, but it never loads... the same browser never shows that load the folder or message. Browser is Firefox 12. It works fine in Internet Explorer (which I hate).

  I tried on three different computers, two running Windows XP Professional with SP3, with Windows 7 Ultimate 64 bit with SP1, all three 12 of Firefox running. Hotmail works very well with them in IE, but not Firefox. Tested also 12 of Firefox on a machine of Puppy Linux 5.28 with Hotmail and who has worked surprisingly well.

  I tried to clear the cache and cookies completely and Hotmail still not working properly... I think remember me something like this is happening before, but I don't remember how I got it... all other fixed sites on work computers perfectly, only Hotmail is acting weird and has been doing for 4 hours about now.

  .. .anybody have thoughts?

  EDIT - I should also mention that I does no update, no plugins installed addon or whatever it is in no way changed since it has been changed to work properly on all computers.

  EDIT #2 - I tried to start Firefox in Mode safe mode with all disabled... same question, Hotmail does not work.

  Please read this thread:

  https://support.Mozilla.org/en-us/questions/926740

• Firefox prompts to save passwords of websites. The key to the Password Manager icon appears on the left side of the address bar, but the corresponding window asking if I want to save the password or not, does not appear. I tried all the possible solutions

  I installed the latest version of Firefox on my laptop (Windows 7 Professional 64-bit). The thing is that firefox prompt to save passwords of websites. I'll explain you a little more away with an example: suppose I load www.gmail.com. When I login, the password manager key is displayed on the left side of the address bar, but the corresponding window which would ask if I want to save the password or not, does not appear. I tried all the possible solutions. It is true that when I restart firefox with disabled modules (safe mode), password manager works fine. But I don't really use Add-ons that could prevent firefox to save passwords. I disabled all add-ons and ran firefox in normal mode, but the password manager does not work yet. Please keep in mind that I tried everything and that any post not published so far describes a similar problem to mine case. Consider that I have the same I have configured the entire system from the beginning. The problem appeared again from the first time I launched firefox. At that time, I had not installed any antivirus software and there is no add-on with firefox. Hope someone can give me a valid solution...

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

  It is possible that there is a problem with key3db and signons.sqlite files that store the encrypted names and passwords in Firefox.
  
  Rename signons3.txt and signons.sqlite files in the Firefox profile folder.
  
  You can add .old files (key3.db.old and signons.sqlite.old) names or move them to another folder to make it possible to cancel the action.
  
  You must define a new master password after renaming or removing the signons3.txt and all the currently saved passwords are lost.
  
  If that worked, then you can delete the renamed files that are no longer needed.

  See:

  • "Troubleshooting" in http://kb.mozillazine.org/Password_Manager

• Pavilion dv6 - 3163cl does not play blu ray movies

  The game screen comes up and it goes into the updates and I have select or not it returns to this message.  I tried to use the touch pad to select the game, rather than the mouse, but that does not make a difference.  I couldn't play this blu - ray disc library at home, without the internet.  at the library, with the internet, I still can't play.

  also received a message that the sp50935.exe should be uninstalled.  given that I just downloaded worries me to uninstall.

  see the post about? power play DVD and not uninstall HP DVD media, but if it works I am unsure of how to bring that?

  Hello

  First of all, if you still wish to reinstall HP MediaSmart DVD, the latest installer can be downloaded from the following link.

  HP MediaSmart DVD.

  However, the issue of the update with MediaSmart DVD is well known, so I would really say that replacement by the version of HP from Cyberlinks PowerDVD 10 that seems to be a much better solution. You can install this software as follows.

  First, download the latest installer for this on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56904.exe

  Once the download is complete, open windows control panel, open programs and features, make a right click the entry for HP MediaSmart DVD and select uninstall - when this process is complete, restart the laptop.

  When windows has completely recharged, open your download folder and double-click the installer for PowerDVD 10 start the installation.  Once this done, see if your Blu - ray disc now plays OK.

  Kind regards

  DP - K

• Can Windows Media Player XP play MTS file type? I tried, but the video does not play smoothly. Is this fix really?

  I tried, but the video does not play smoothly.  Is this fix really?

  There is a possibility that Windows Media Player could
  read the file if you rename the MTS to MPG or AVI.

  And/or...the suite of freeware Media Player can be
  worth a try.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)
  (The name of the file to download is: "MPC - HomeCinema.1.5.2.3456.x 86 .exe ')

  If this fails, it may be worth trying to convert the MTS file
  WMV format:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converters are a few examples:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  You will need to unzip the file... or you could just drag
  the Setup.exe from the file out of the folder and drop it on your
  desktop and install from there.

  Once installed... Open Sothink and go to... Add the files button...
  Find and select the clips you want to convert.

  Next... in the encoding settings... Choose... Video credits.
  WMV - Windows Media Video (*.wmv).

  Choose an output folder and on the left, click on the button convert.

  You can experiment with other settings later but
  This should help you get started.

  (2) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...