Hotmail froze both my actions and will not respond

Similar Questions

• With Firefox my fonts e-mail decreased and will not respond to reset, but problem goes away when you use Explorer

  With Firefox my fonts e-mail decreased and will not respond to reset, but problem disappears when you edit from Internet Explorer. This happened with no incentives from me about two weeks ago, and no resets respond to the email. Occurs only with Fox. With ie I enlarged and adjustable policies.

  Have you tried to resize the text size by pressing CTRL and + at the same time (increase font size)?

  Otherwise, you can reset Firefox on its default settings by following the steps here: https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems

• Satellite Pro L450D black screen and will not respond to any keys

  Hello

  My niece has used his Toshiba L450D for almost a year now and he really liked it, who was until last month. She turned on her laptop and when she presses the button of the mouse, the button cracked and he fell into the laptop.

  Now my brother contacted Toshiba and I was told because it is under warranty it might return for repair because it was a common fault. Then he he packed in loads of air bubbles and a box to make sure it was safe.

  A few weeks later he came back repaired but we were all shocked that the laptop was put in a very loose box and you could hear this rattling noise. When we turned on the battery was flat and we had a new boot menu.

  As she installed it Windows 7 laptop would boot directly into Windows 7, but now after the repair of the laptop shows a menu black screen with as follows:

  + Windows 7 +.
  + Recover Windows to Factory Settings [active EMS] +.

  So we started in Windows and everything went well, but now after 5 or 10 or even 20 minutes, laptop displays a black screen and will not respond to keys or mouse movement. There is nothing on the screen its just black.

  I started in SafeMode (which was more difficult with the new menu) and it does the same thing. I even managed to do a virus scan quick who took 3-4 minutes and was clean.

  I would like some advice on what my niece is very angry, and it's difficult to explain what is happening to a child in the primary school.

  Any help would be grateful.

  Hello

  Have you tried the option of HARD drive recovery?

  If this is not the case, try to set the notebook back to factory settings using HARD drive recovery.
  Turn on the device, press F12, choose repair my computer, then select Toshiba HDD recovery.

  I hope it will work!

• iPhone 6s just exploded and will not respond

  iPhone 6 s.  I don't know the rest of the spec, because I can't access my phone.

  I took a picture.  A few minutes later, I tried to open my phone and look at the picture, but the phone does nothing.  I tried the home and power buttons.  No response.  He must be about 60-80% power after it loads this morning.  There is no other symptoms I can think of the report.

  Try a Reset: press and hold the sleep/wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears. -Note: no data will be lost

• my ipod classic shows a red circle with a cross ared next and will not respond

  my Ipod classic shows a red circle with a red x inside, and it's making a clicking and whirring sound.
  can you tell me what is the problem?.

  Dead IPod I'm afraid.

  See iPod displays an icon 'X' Red - Apple Support. Despite the date of the last update of this document, I doubt Apple have much interest in the classic iPod service. The line was removed some time ago. See also Re: corrupted iPod classic. You can try to get the stats, but my guess is that it will fail open player.

  TT2

• Lightroom 6 crashes when opening and will not responding do not state [was: Lightroom 6]

  My 6 Lightroom has stopped working after only 4 months.  What can I do?

  Thanks for the update.

  Please follow the steps below:

  • Stop Lightroom
  • Go to %appdata%\Adobe\Lightroom\Preferences\Lightroom 6 Preferences.agprefs
    [appdata would be hidden by default so you will need to press windows and r key to open the run window and type %appdata%\microsoft\windows\sendto then follow the additional path.]
  • Open the Preferences.agprefs 6 Lightroom file in Notepad
  • Change the following line: useAutoBahn = true to the useAutoBahn next = false
  • Save and close the file Lightroom 6 Preferences.agprefs
  • Restart Lightroom 6

  Reference article: using Adobe Photoshop Lightroom | Graphics processor (GPU) acceleration, troubleshooting & FAQ Lightroom

• Lightroom CC 2015 continually freezes and will not respond.

  I uninstalled, updated, reinstalled, rebooted the computer, everything I know to do.  But he continues to freeze and unresponsive!  I stop, then restart the app again and again!

  Hello

  Try disabling the option of GPU on the Lightroom > Preferences > Performance tab

  Note also what video card is in use by Lightroom

  Hope this helps

  Assani

• Export and save freezing boxes and will not respond to change settings

  I use a MacBook Pro OSX Yosemite 10.10.1 and InDesign CS5, this problem has just started persistent while I finished a design for a client project and keeps me to manage and modify my export settings. I have not received the error messages and I restarted the program as well as my computer still to find the problem still persists. Essentially the entire program is sensitive and I can still save or export my work using Enter to navigate in the boxes, but the box acts as if it was in the background (unresponsive and frozen) when I try to select anything with my cursor. I looked through my program settings and preferences and can't find anything that seems to be the root of my problem, which seems to be a very strange for me.

  Many things may conflict with the code. We have sen a rash of trouble caused by the Chrome plugins, for example. If you have not installed anything new, see replace your preferences

• Adobe Digital Editions is blocked and will not respond.  How do I unblock this program, so I can reinstall it?

  How can I close Adobe Digital Editions?   It is completely insensitive and nothing works.  I tried to reinstall but tells me it must be closed before I can do that.

  You used Windows or Macintosh?

• I have Photoshopp CS3 on a PC running Windows 8.1.  Bridge froze.  Can I upload photos with the bridge but bridge itself will not respond to the commands of sny, and is the only way to leave the bridge to close.  I tried to use my originsl disc for repair

  I have Photoshopp CS3 on a PC running Windows 8.1.  Bridge froze.  Can I upload photos with the bridge but bridge itself will not respond to the commands of sny, and is the only way to leave the bridge to close.  I tried to use my originsl disc for repair and also tried to uninstall and reinstall and the problem persists.  Any help?

  Hello

  Bridge closing

  Go to this site C:\Users\schawla\AppData\Roaming\Adobe\Bridge (Version) \Cache
  Shift + delete all folders inside this folder cache.

  Reopen the bridge and use

  Concerning

  Jitendra

• When I want to send email from the Explorer, it goes to outlook express and will not let me send email. How can I fix it?

  Why can't I send an email from the Explorer, it goes to outlook express and will not let me send e-mail

  Hotmail questions need to be asked here: www.windowslivehelp.com

  This forum deals only with Windows.

  Steve

• Windows 7 sees my second monitor as "generic non - PnP" and will not let me set the correct resolution

  Hello

  I just installed Windows 7 Professional 64 bit on a new hard drive on my Dell Studio 540. The PC has a graphics card ATI Radeon HD 3450 and has a Samsung 226bw 22 "monitor on the digital output. This works very well, and has the resolution of 1650 x 4050. When I am running Vista (on the previous hard drive), I got a monitor flat 14 "old on the other out, and it worked fine (although at a lower resolution).

  I added a monitor AOC F22s + on the other output, expecting to be able to put this to the recommended 1920 x 1080 resolution. Unfortunately, Windows has developed the driver for this monitor "Generic non - PnP" and will not let me set the correct resolution. To the maximum it will allow is 1600 x 1200, (as well as all other resolutions it allows) do not use the monitor at maximum capacity, which is the ratio of evil anyway, so the display seems tense.

  I run Windows Update, so have the latest drivers. I tried to install the other drivers, but nothing helped.

  I tried to unplug the Samsung monitor and restart the PC, so that the AOC, one was the only monitor it and he always had as 'Generic non - PnP' with the wrong resolution.

  Someone at - it ideas? I'm at my wits end. AOC support did not understand and could only suggest that the monitor was faulty, but the place where I bought it insist that it works very well and so no Exchange or get a refund (no restocking fee, which is a RIP-OFF).

  I really want to use both screens and would appreciate greatly any help that anyone can give. I hope I gave enough information. If I didn't, please let me know.

  Thanks in advance,

  Alan

  PROBLEM SOLVED!

  It turned out that my VGA cable was wrong and that it was not send the right signal to the computer. The screen worked fine with a VGA monitor, but the PC has not said that the new monitor is a PnP I tried a different cable and it worked fine.

  Thanks again to all who have suggested things.

• The update of Microsoft Windows KB3134214 file is suspended and will not be, nor finish the rest downloads to install.

  * Original title: Microsoft kb3134214

  The update of Microsoft Windows KB3134214 file is suspended and will not be, nor finish the rest downloads to install. I downloaded the updated individual security file. I'll wait to install pending a possible resolution here. If anyone has experienced this problem and has a resolution, I would be grateful to receive information and repair.

  Hi Nathalie,.

  Thanks for the reply and the link to the article. I appreciate it. While I was not having trouble to download updates, it was one of the update of the files froze during installation. I had gel resulting set before your answer.

  I'm not sure what I did to fix it, but the installed annoying file itself. Here are the steps I took to learn that annoying file has been installed:

  "I restarted my computer.

  "then stop it showed that he was trying to install the file again

  "I hit the reset button on my machine.

  "My machine is restarted, I received the message that my machine was not correctly stop and choose Safe mode or start normally.

  "I chose boot normally.

  "Somewhere during the start-up, something installed or flashed a message

  "My system automatically restarted by itself.

  "On my screen, my computer displays a message saying it was set up my system.

  'My computer restarted again

  "Back to my login screen, I had a repeat of the previous message from my computer's configuration.

  "After that over, I arrived at my office

  "I've manually run Windows Update

  "After Windows Update, I checked the files available, disabled the original file in question and click the button install.

  "These files correctly installed and gave a message requesting to restart."

  "I rebooted my system manually.

  "Back in my office, I manually tried to install the file in question.

  "It gave me a message that it was already installed.

  How he installed himself is a mystery. Other than on the first attempt to update my machine, it has NEVER included in my another attempt to update. Anyway, my machine is purring along as if nothing had happened.

  You can mark my question.

  Thanks for your help,

  Robert

• CPU on HP p6130y will not respond unless I have unplug and reconnect.

  CPU will not respond unless I have unplug and reconnect.  The power light turns on but the screen remains black.  Monitor works.  Sometimes it will come around after a disconnect - reconnect.  This morning I had to unplug and reconnect six times before would respond to the computer.  HP model p6130y.  AMD Phenom 9750 Quad Core processor.  Windows Vista.

  23Scorpio wrote:

  Hi old_geekster and thanks for your reply.  I tried to find a site that has the power to my computer and I'm having no luck.  Same HP does not list that they carry the power supply for my p6130y.  You have no idea where I can get this?  Do you know how much it costs?  Thanks again.

  ___________________________________________________________________________________________

  23Scorpio, it's my pleasure.

  You should be able to use any standard ATX PSU in the computer.  I suggest to measure the current PSU and comparing measures that you choose.  I like Corsair and OCZ.  The PSU is the backbone of the computer, it is not the place to save money.  Both in the links I provided are good examples of what you can use.  Read the reviews to see what users have to say about them.

  If your problem is solved, please click "accept as a Solution.

• 755 p frozen and will not be awarded to zero...

  I have a 755 p (Alltel). Last night, he froze and will not be reset. I tried a soft reset, hot and hard, but whenever I put the battery in the numbers/screen just flashes on and outside, with no screen.

  I go to school in Tennessee and do not have access to an Alltel store no more than 3 hours of driving...

  I NEED A FIX!

  I disassembled the phone and discovered that it is the key part of volume that was stuck and was not allowing me to push any other button or reset the phone! I pulled the button up and now the phone works great! Thanks for your help...

  Message is about: Treo 755 p (Verizon)