Hover over the images does not not using HTML in Dreamweaver CS6

Similar Questions

• When I open Photoshop CS6, the image does not appear in Photoshop. The image IS open, i.e. the name of the file is displayed on a tab and the image layers appear in the layer panel. What is going on?

  Photoshop and Bridge is open as usual. But when I open an image, the image does not show in the area of the image. The image filename is show in a tab and the spectacle of layers in the Panel layer. What is happening and how to fix this.

  I solved the problem. It was somehow connected to my using Microsoft

  photos of theme. I put Windows to use the basic theme and the problem

  went. Thanks for the suggestions.

  HA!

• I have a hp m175nw printer. email prints from my iphone, but the image does not work

  M175nw printer. email prints from my iphone, but the image does not work

  If the DPI (dots per inch) is less than 100, the printer will not print the photo because it would be too low in quality. Draw the image on the computer, then right-click on it and click Properties, check the horizontal and vertical dpi and see if these figures are less than 100. Have you tried to connect the iPhone to the same network as the printer and try to AirPrint peak? AirPrint road doesn't have the same requirements on IPR as the ePrint.

• In the program Panel, when I click the SPACEBAR (that is, 'Play'), the image does not advance.

  In the program Panel, when I click the SPACEBAR (that is, 'Play'), the image does not advance. When I click on 'Play' again once (that is, 'Stop'), the fixed image confirms that we went. Please, what should I do so that when I click the SPACEBAR (that is, 'Play'), the image does indeed move forward? Thank you!

  You send messages in the forum Business Catalyst, you should put this in the forums Adobe Premiere http://forums.adobe.com/community/premiere

• Path of the file Visible when I hover over the Images

  Hello

  I converted a PowerPoint document in PDF format. The PowerPoint includes images (GIF, JPEG). When I move my cursor over the image in the PDF I created, I see the path to the file C:\User\User Name\Photo\File Name.JPG.

  Is there a setting in the PDF file that I can "unselect" so I do not see the path of the file when I hover over the images?

  Thank you

  MindForge

  Please try the suggestions mentioned here: http://forums.adobe.com/message/3364072#3364072

  Kind regards

  Deepak

• Why is code to get the center of the image does not?

  Hey there. I'm trying to set up the center of the imags that load so that I can put them in the center of the stage. I do this each image is a different size.

  Here is the code that I learned to work before, but its doesn't now and I've been searching for what I've done wrong with no luck. : (

  Would watch you over and maybe you'll see what I'm doing wrong?

  public function placePicture(e:Event = null):void {
       rawImage = imageData.image[imgNum].imageURL;
       lastImageIndex = imageData.*.length() - 1;
                      
       imageLoader = new Loader;
       imageHolder = new Sprite;
       imageLoader.load(new URLRequest(rawImage));
                                
       imageLoader.x -= imageLoader.width/2; //this should set the image to the center no?
       imageLoader.y -= imageLoader.height/2;
       imageHolder.x = 640; //this is the center of the stage
       imageHolder.y = 100;
       imageHolder.addChild(imageLoader);
       masterHolder.addChild(imageHolder);     
  }
  

  The result when I publish is the image comes on stage, but the upper left corner goes to 640 instead of the center of the image to 640.

  I tried several variations of this all with the same result:

  imageLoader.x = - 1 * imageLoader.width / 2;

  I tried to use setRegistrationPoint with the following tutorial: http://flashscript.ca/set-registration-as3.php

  and I tried to do all this by inserting the charger in a sprite and then in applying the code to the sprite and then adding only another sprite sprite and put to 640 and inserting is not in another sprite and trying to right set up the existing 640 sprite (I hope that all the senses). And I tried to put width/3 and nothing else happens.

  If you have other ideas or you can see what I am doing wrong I would be really gratefull for some tips! : )

  Thanks for any help!

  Oh, and I'm getting no errors on it.

  width and height of the image are not available until the loading is complete.  That is to say, use a Headphone/Earphone full function.

• Impossible to change the wallpaper, the location of the image does not display images.

  Original title: photo location not display images

  I'm trying to access my pictures folder and select a background for my office. But when I search for the location of the image and select the folder of the screen does not display images, even if the pictures are present in the folder. The screen shows only 'solid colors.
  I moved to the location of my pictures, sounds and video to another folder. Then, the default folders are different.
  In Explorer when I just click on the photos forlder ther is a location tab saying my it's the default folder.
  One last thing.
  If I go to explore and navigate to the folder my pictures, right click on a picture and select 'Set as wallpaper', then it displays the content and the folder.

  Any ideas?
  James

  I got it working again.
  And that's a good reason to not mess with the registry.
  I have used a tweak registry to hide the libraries in the Explorer navigation pane. Once I've restored it Windows seems to have found the files for my photos. I then re - hid libraries and everything seems to work ok.

  James

• Change the size of the resolution and the image does not change the result on the screen?

  
  I use Photoshop CS3. I'm changing the resolution of several images that will be printed in a newspaper. So the current images are 72 dpi and really huge - for example 36 x 27 inches (size of the document), and when I change it to 300 dpi, the size of the image to reduce to about 8 x 6 inches, as I hope. But the image I see on the screen does not change. Thus, for example, when I open the image originally, it's 33% and the entire image is visible. After I change the resolution and the size of the image has changed accordingly, the image appears to be always the same and it remains at 33%. The image should not shrink on the screen because its size has been reduced? Or if she stays the same on the screen, the percentage should not change? I mean if the size of the document is now 8 x 6, it should be able to display at 100% and not to fill my whole screen... I'm so confused. Thank you...

  Gradded,

  The "Size of the Document" of the dialog box size of the Image is just to specify the size (in inches) that your document will be printed. The ppi adjustment has nothing to do with what is displayed on your monitor. Your monitor does not care something about PPI. The monitor contains a number of pixels and after you change this setting, ppp, the monitor will always be the same number of pixels.

  As long as you leave the box "Resampling" disabled, will not change the size of your image (pixel Dimensions). You won't see any change on your monitor. If you check "Resample", then the size (in pixels) of your image will change.

  I hope this helps.

• Hover over the images in a slide show

  I am doing a slideshow of images before and after for a customer.

  Rather than having just all one after the other, I want all the images after to display as usual and the front to display the overview of each slide.

  I can do this job in a basic slide show when, rather than add a picture to the area of the Image of heroes, I use the fill and the States.

  However it only allows me to make one, that I can not add any more empty hero Image boxes (or I don't know how to do, is it possible?)

  When I add a picture from the slide show menu, it appears on top of the fills, and I can't give pictures added in this way a roll on the State.

  Can someone tell me how to add either extra blanks to hero Image, or how to apply the effect, I want to the images in the areas of the Image of heroes.

  Thanks in advance, if there is no additional info I can provide my problem, please let me know!

  M

  Hello

  You cannot add several boxes of hero image in the slideshow even. Now you can use different slideshows for your different images but usually you give the effect of the slide show but you'll be able to see all your images at once and then after if you flipping them you would be able to see the images before.

  Now, in order to create the effect you want, what I suggest is to use "Composition something". In the widget of composition, you can the triggers as small thumbnails for your images in the target, you can set the fill as your image after and in the rollover state you can use the image before. After that, you can use the feature of AutoPlay available in the widget of composition, and you will get the desired result.

  Hope this helps

  Kind regards

  Rohit Nair

• Hover over the images and the text

  Hello

  Cannot find this answer on the forum.

  How can I show a picture and some text using the roll on.  I have a small that by clicking on the image or hover over shows but a larger image with the text.

  Thank you

  Hello

  Assuming you are using Captivate 3 or 4 Captivate, you have an object known as a 'slidelet"can be used for this. When you insert the slidelet, you get two areas. One is the area that you hover over. The other is what appears when you hover over the other domain. In the box that appears you can insert images, captions and other elements.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• By clicking on the image does not show in the links Panel

  Has this changed?

  When I click on an image (within a framework of) the selected image used to be highlighted in the links Panel, so you can easily identify what image you are using.

  This does not happen on my version (v11.4.0.90). I guess this or has this already happened?

  Try restarting indesign.

• Place the image does not show up once I have save to PDF

  I checked the link again and again. The link is fine. Initially, I had a .psd file in there, I thought that maybe the problem, but then it changed to a .eps and he always did the same thing. However, the strange thing is that the placed image appears so fine when I discovered the pdf on my computer. I also checked on the computer of a friend and it was beautiful. But on mac of the client, it does not see it... Anyone know what is happening here?

  sarahpeller wrote:

  . But on mac of the client, it does not see it... Anyone know what is happening here?

  Good possibility your PDF is complex, using transparency, perhaps, and your friend (s) with the Mac uses an excerpt to see. Make sure she's using Acrobat or Adobe Reader (FREE) before doing anything else.

• The image does not load in dreamweaver, but can see it everywhere else

  I have an image I need to imagemap, but it will not be displayed in Dreamweaver and I can't understand why. I checked the link to the image and it worked, and the page works fine when I saw in firefox, but I still need to imagemap. I saved the html page from photoshop with save for web and devices. Its all a big picture, none of the slices. I tried Dreamweaver shut down and reboot several times, but it does not work. I imagemapped other simular pages and they have loaded correctly.

  You use an absolute reference to the image. Is this image remote or local? If local, then use doc relative or site root relative links. If remote, then you must enable the remote image showing in DW. I am now on a computer without DW and don't remember exactly where in preferences it is.

• Save the image does not remember last location recorded for Firefox 9

  Just updated for FF9. I'm is not just disappointed, but which are checked the the bug that causes save slot to remember where it was recorded the last file of individual sites instead of just where the last file has been saved to has not been set. Why is this? How can be addressed?

  For example, I have save a folder A Motifake image and an image of ihasahotdog to folder C. Then come back to Motifake and save a picture. Instead of folder C, save under opens to the folder instead of the folder C. I have direct save as to save the image in A file. The I'll go back to ihasahotdog, save a picture and instead of A folder, save under opens to folder C.

  This bug also occurs with all types of files, not just of images.

  The FF developers know that the "added functionality" that started with FF7 causing the FF remember the last download save the folder based on the domain in the URL instead of use the last folder saved on annoys many users both directly and by the lack of preference to toggle. Yet they will not fix it.

  Why they do that little matter how much a good idea, they think it is, most users hate it and do not want? And what is this B.S. "is under development"? They added in an updated version, why can't they get out as fast as it was added?

  Firefox 11 should be released about 12 weeks after the release of Firefox 9, so it should be in March.

• Download the image does not match the selected image - incorrect cataloguing.

  Hi have downloaded an image but it does not match the selected image.  He has obviously been catalogued incorrectly.

  AdobeStock_40645074

  Can you please SRS.

  

  The image image / I download who is it

  

  Thank you

  Hi Karen,.

  I have a license of the image on my end. You are right, that the preview is incorrect for the file I.

  We would get the image inspected and you will receive a credit on your account by Monday, May 16, 2016.

  Kind regards

  Gerard