Hovering above the markers is the incorrect display of ToolTips

Had an accident and since, when I hover over a marker to see the ToolTip, they display incorrect information. Sequence markers show random clip marker info.

I cleaned my the media cache database. Are there all other caches I could delete this reset? Other thoughts?

Screen Shot 2016-03-02 at 10.33.26 AM.png

I had also developed a problem where I couldn't drag the elements around in the project bin. Figured it out: damaged window layout. Delete the layout and created a new. All good now.

Tags: Premiere

Similar Questions

  • BlackBerry Smartphones display my number above the dialing key

    My phone display "My Number: unknown Number" above the number display and I want to change my real number. "I tried the 'status' in the Menu which will then show my number: unknown" and the times of 'Last call' and 'calls altogether. It is possible to highlight 'Unknown' and to then display a keyboard via the menu button, but I'm not able to change 'unknown '. Any ideas?

    Hello

    See the link attached for more information.

    Thank you

    Bifocals

    This problem may be caused by one of the following:

    1. The phone number is not filled on the map of the Subscriber Identity Module (SIM).
    2. The SIM card was not put into service for the BlackBerry smartphone to recognize the phone number.
    3. The phone number is programmed into the wrong slot in the SIM card

    http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB01889&sliceId=1&docTy...

  • gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the macbook pro battery retina start

    gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the start of the battery. This happens on macbook pro retina 13 inches

    When I try to startup macbook pro retina in battery mode, it will fail to start showing low battery level and an indicator to recharge the battery. It does not start on battery. When I then connect via the power cable at startup (and check the battery level), monitor of battery in the menu bar indicates that the battery is charged to the top.

    It gets really frustrating and remove my ability to use the macbook pro retina as a truly portable device...

    Appreciate any help on this

    Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support

  • I have a HP Pavilion that includes a tactile sound bar above the keyboard. The display is no longer there

    HP Pavilion Entertainment PC Windows 7

    Who has his touch above the keyboard and a display bar says on the bottom of the screen when I touch the bar.

    This view is not there any longer.

    Hello

    Download and install the HP OSD utility on the link below.

    http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55152.exe

    After the installation is complete, restart the laptop.

    Kind regards

    DP - K

  • My I Phone 6 s incorrect display of battery percentage? everyone knows the same problem?

    My I Phone 6 s incorrect display of battery percentage? everyone knows the same problem?

    Hello dipudivakar,

    Thank you for using communities Support from Apple!

    From your post, I understand that your iPhone displays a percentage of the battery which is incorrect. To resolve this situation, I would first of all turn off the option to display the percentage of the battery on your iPhone. If you need information about how to disable this feature, the following article explains this process.

    Display the percentage of the battery on your iPhone or iPad - Apple Support

    After you have enabled this feature, please reboot your iPhone by following the instructions in the next section.

    Restart your iPhone, iPad or iPod touch - Apple Support

    Once finished, restart, enable the option to redisplay the percentage of your battery and test the question.

    See you soon!

  • "I bought a new laptop which has a 60 day trial of microsoft office on this subject, I also bought a copy of ' microsoft office and Student 2007 ' however it displays the incorrect product key when I type in the product key on the box of cdrom.

    "I bought a new laptop which has a 60 day trial of microsoft office on this subject, I also bought a copy of ' microsoft office and Student 2007 ' however it displays the incorrect product key when I type in the product key on the box of cdrom.

    Uninstall the trial version, and then install the CD-ROM version.

  • User account incorrect displayed on the logon screen

    OT: Displayed Incorrect user account
    Hi all
    When you switch on my laptop, instead of my list of normal user account, the screen displays the message "incorrect username and password" - OK.
    If I select OK, a profile of incorrect user account appears. Strangely although perhaps, the specified user name, actually part of my email address?
    I tried to enter all kinds of passwords relevant to me, but of course, who are rejected and I went back to 'bad user' - However, if I then click on the option "change user", then get a screen showing both my own correct profile, right next to the bad. By selecting the correct account, then I can access my homescreen, as usual.  I go to the user account page, expecting to remove "rogue" account, as you would with a guest account - for example - but - hey - he's not here, not anywhere for me to remove I can not just simply get rid of it.  OK - this is something I can live with - but it's so boring, Forums, so far, failed to help. Experts or skilled geeks out there?   I am running Vista Home Premium + SP2.
    Thank you.

    Hi silverfox,.

    You have made no changes to the computer before the broadcast took place?

    Method 1
    Try the following steps:
    a. click on start
    b. type the three letters cmd in the search box, and then click OK.
    c. Enter the following command and press ENTER:

    Control userpasswords2

    d. click your account name.
    e. uncheck the box that requires users to enter a password.
    f. click OK.
    g. When prompted, enter your password.

    Method 2
    Follow these steps and check if that helps:
    a. Click Start, type regedit.exe in the start search box and press ENTER.
    b. open the registry at:
    HKLM\Software\Microsoft\WindowsNT\CurretnVersion\winlogon

    a. check whether the automatic admin logon is enabled.
    b. Add a new string value called AutoAdminLogon and set the value to 1
    c. Add a new string value called DefaultPassword entry and set its value to the password for the user indicated in DefaultUserName

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Method 3
    Check to see if the same problem persists in safe mode.

    Start your computer in safe mode
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Additional information:
    The Windows password problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Windows-password-problems

    Microsoft's strategy concerning lost or forgotten passwords
    http://support.Microsoft.com/kb/189126

  • Incorrect display using the loop format for

    Hello

    I have a digital painting using a hexadecimal display format that is autoindexed by a loop for. Within the loop for each unique value is passed to a Subvi needed the hexadecimal display format. Unfortunately, indexing is not keep this hex format but transfers back to a decimal number.

    No idea how to solve this problem?

    Thanks in advance and best regards

    Simon

    Thanks for this tip. The problem was an another Subvi where I created the num-array that will subsequently in the loop for., all the digital elements where the value instead of I32 I16. The controller could not handle these false values, so I got a nonsense.

    Thank you very much for your quick responses!

  • Incorrect 'display the contents of the iframe on smartphone and tablet.

    Hello, I am writing because I do not understand how to solve a problem. The content of the iframe displayed in a smartphone or Tablet is not in the right position relative to the screen in any computer. In addition, the effects of the smartphone page or scroll Tablet seem to be active. How can I fix these problems? The site is available at: www.ilcalamaioelettronico.it

    Thank you!

    Please do not hesitate after that our corner of the encoder:

    https://forums.Adobe.com/community/coding-corner

    Thank you

    Sanjit

  • Reactive projects displayed the incorrect content due to the orientation of the tablet.

    In a sensitive project, how Captivate to determine which view should display on the type of device? For example, should I use pixels in width or device type?

    We had problems of design for tablets because when the Tablet is held in a landscape position, the main display is shown. When the device is held in portrait position, the Tablet is displayed. Because some tablets are higher resolution than desktop computers, how do we ensure that the view of the Tablet is displayed regardless of the orientation of the Tablet?

    This is by design: landscape on tablets show see first breakpoint, Portrait shows the tablet display.

    It is not the resolution of the Tablet, but the browser which is important. You can find them on viewportsizes.com. You will see that, although many smartphones have very high resolution, browser resolution is very low.

  • Spry MenuBar - IE6 - how this submenu is displayed above the parent element

    Hi you all,.

    I need the menu bar to open the submenu above the parent element.

    Here´s what I did: I inserted a spry menu bar and the only css change I did was one shown below in red "botom: 2em;"

    It works exactly as I need - in Safari, Firefox and Opera.

    However, in IE6 the submenu appears well below the parent element. Is there a solution?

    Greetings from the Germany

    Alex

    / * Submenus should appear under their parent (top: 0) with a higher z-index, but they are first the left side of the screen (-1000em) * /.
    UL. MenuBarHorizontal ul
    {
    margin: 0;
    padding: 0;
    list-style-type: none;
    do-size: 100%;
    z index: 1020;
    cursor: default;
    Width: 100px;
    position: absolute;
    left:-1000em;
    bottom: 2em;
    }

    However, in IE6 the submenu appears well below the parent element. Is there a solution?

    Perhaps.  It is difficult to say without seeing your page, however.

    The position of Spry menu bar submenus is controlledby the margin on submenu ul tags property.

    1. Locate the ul. MenuBarVertical ul or ul. Rule MenuBarHorizontalul.
    2. Change the margin:-5% 0 0 95%; default values the values you want.

    http://livedocs.Adobe.com/en_US/Spry/SDG/help.HTML?content=WS895F3A6D-6D73-42ef-B568-3D04A BD2F171.html

    In addition, browse the CSS for IE hacks coments. Often, these workarounds for older browsers may be commented or removed.  Test before you remove anything permanently.

    Nancy O.
    ALT-Web Design & Publishing
    Web | Graphics | Print | Media specialists
    http://ALT-Web.com/
    http://Twitter.com/ALTWEB

  • How can I stop Firefox toolbar pop up when the mouse is above the screen mode full screen (without kiosk mode, please)?

    I don't want the toolbar always there (so disable auto hide does not solve the issue). I would prefer a right-click or use a combination of keys to retrieve the toolbar. The toolbar arise at any time that the mouse is near the top of the screen is too distracting. It should be an option, users can enable or disable or card for anything other than the mouse hovering. The only solution I've seen mentioned is to go the full kiosk with something like R-kiosk, but it's really a too extreme solution to a simple problem. Is there a setting already hidden in the topic-config for this problem or is it a feature request? Thank you.

    There is no built-in way to disable this feature to display the toolbars when you move the mouse to the top.

    Add code to the file userChrome.css below default @namespace.

    @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    
    #fullscr-toggler { display:none!important; }
    

    The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

    You can use this button to go to the current Firefox profile folder:

    • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
    • Use a text editor like Notepad to create a userChrome.css (new) file in the folder chrome (file name is case sensitive)
    • Paste the code in the userChrome.css file in the Editor window
    • Make sure that the userChrome.css file starts with the default @namespace line
    • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userChrome.css.
      Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userChrome.css.txt file
  • Is it possible to get the expression of quick filter above the list of messages in the vertical view?

    See the attached screenshot.

    I have a fairly big screen so I prefer to use the vertical display (with message pane appears to the right of the message list pane).

    I use quick filters / lot of research in the search for old messages. In doing so, my attention is focused on the message list pane, but to type an expression that I have to drag my focus on the far right of the screen, above the message pane. Logically, this area of the screen should be associated with the message, not the list of messages.

    If a simplistic solution can be available if I ask you if there is a way to customize the location of the elements in the quick filter bar, as I illustrated on the screenshot?

    But I think that the fundamental solution is to make the bar area of quick filter in the list pane message, instead of the current arrangement where it is part of the largest component that contains the message list pane and message pane.

    I welcome any advice on how to solve this problem, for me, or get it repaired for others to share.

    Ah, found the bugzilla database - was looking for link to support the site, but as I couldn't find one, I assumed that this channel has been used on the screen of the excessive defects in bugzilla.

    In any case, a quick search found me https://bugzilla.mozilla.org/show_bug.cgi?id=592248 - where someone complained the quick filter bar was too short in vertical view and this has been resolved by extending the bar on the top of the message pane.

    I guess that preference will depend on the size of the screen. I will take the question through bugzilla and can provide a patch to satisfy both sides, if I have time one of these days.

  • Thunderbird opens in a miniature screen just above the taskbar

    I deleted thunderbird and re3booted my machine and then I reinstalled Thundeerbird but still only a thumbnail above the taskbar.
    However, I can open the address book, and it opens in a normal window. Please help need my Thunderbird UI

    try to hold ctrl and press the tab... When Thunderbird is highlighted let go and get him. It's probably almost invisible where it was pushed almost immediately display the taskbar

  • British English chosen for keyboard but my @ above the number 2 has changed "since the last Update. He want to come back...

    Since the last OS update two or three days ago my pre-selected keyboard has changed.  They keyboard watch my @ sign is greater than the number 2 - and it has always been up to was last updated.  Now he has changed places with the "display sign beside the semicolon key.;  I have UK chosen as my favorite keyboard, but this seems to be too governed by something else. How can I fix this to what it was?

    If you go to System Preferences-> keyboard-> input methods is your keyboard the value 'British' or 'British PC?'

    I ask that the keyboard layout of the standard British PC has quotation marks ("") above the 2:

Maybe you are looking for

  • Spacing of paragraphs

    Since I upgraded to El Capitan I can't After/Before leading into Pages.  Can someone point me in the right direction please?

  • Satellite Pro U400 - BT does not work after installing Win 7

    Hello. I have a problem with my bluetooth device. I have Toshiba Satellite Pro U400.My previous operating system was Windows Vista business and I just replace it with Windows 7.Since I installed it my device Bluetooth does not work anymore. I have ha

  • Someone at - it a problem with the iPhone (6 more) random quits responding to touch?

    It started at the time update 9. carried out once - with support and they had me to do a clean install. Seemed to help for a while-, but began again in December (is there another patch/fix ousted?). Reboot solves almost always-so it leads me to belie

  • CD recovery set for Pavilion DV - 6000

    When I bought the DV-6000, I made a set of recovery CD (1,2 & 3).  When I boot from CD bay, I get a message "these PC recovery disk do not support this model of PC.  I've had no luck trying to find on HP's site on how to buy a "package of recovery." 

  • Phot individual icons displayed a picture of Mount deafualt

    Hi, I have a Lenovo laptop woth Windows XP. After an isntalled update I can view is no longer the icons of my photos. They appear quickly and then turn into a default icon from the mountains. So, I don't know which photo is that. I went into the cont