How and where should I go to find out how to configure my joystick so I can use the joystick to use the flight simulation game that I bought from microsoft?
I can't find out how to configure my joy (attack3) stick to play Flight Simulator. I don't want to use the keyboard on my computer to steal the game... Where can I find the instructions on how to configure and use the joystick?
Hello
1. what happens when you connect the joy stick?
2. do you get an error message?
3. what version of Windows are you using?
Perform the steps mentioned below and check if that helps:
Step 1:
Flight Simulator x: using a gamepad
http://www.Microsoft.com/en-US/Download/details.aspx?ID=16624
Step 2:
Usually, vista Windows 7 will find and automatically install the necessary drivers when you plug your game controller into your computer.
(a) connect the joystick to the USB port via the adapter.
(b) see if it is detected.
(c) Windows should recognize the new hardware and set in place to work properly.
If this isn't the case, install the relevant drivers for gamepad for the manufacturers Web site.
Step 3:
I suggest the following steps and check for the device.
1. in Control Panel, open game controllers. To do this, use one of the following methods:
a. click Start, typejoy.cpl in the Search box and press ENTER.
2. click on your game controller, and then click Properties.
3. on the Test tab, test the game controller to verify functionality.
Here is the link:
http://support.Microsoft.com/kb/831361
I hope this helps.
Tags: Windows
Similar Questions
-
How do I know how is Administrator and where should I put the password to?
My computer keeps asking for a password
I have 3 standard users on my computer & no one is assigned to be administrator
Cannot install updates because do not know or do not have a password
How do I know how is Administrator and where should I put the password to?Hello
The manual installation of the operating system on the Microsoft Update Web site updates requires the Office of the operating system to run with administrative rights.
Please follow the steps mentioned below.
a. click the Start button.
(b) in the search box of start, type user accounts and click on user account.
c. click on Manage.
d. check which account is designated as administrator account.
Also check out the links below.
Why use a standard account instead of an administrator account?
What is an administrator account?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-an-administrator-account
Change the type of user account
http://Windows.Microsoft.com/en-us/Windows-Vista/change-a-users-account-type
Install Windows updates
http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates
Updates: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions
-
How and where should I go to re-installed asusvire2.0?
Original title: asusvibre2.0
How and where should I go to re-installed asusvire2.0?
http://vibe.ASUS.com/asusvibe_win/
It asks for the connection information before letting download you, don't know whyAfter installation if it does not appear on vibe of desktop search in the search box for the start menu -
I need to know how to remove the most recent version of Firefox. I JUST downloaded tonight and my computer does not have this edit bar little to work with, so I can download the reader good Adobe and my internet was screwed up, since I downloaded the new version of Firefox. I want just the old version of this back because I can't download the Adobe stuff which is necessary to protect my computer against hackers apparently not. It would have been nice to know he had a problem with the new update of Firefox BEFORE I downloaded it. I have Vista, which is usually a problem with Adobe and Firefox. I don't seem to be able to run a lot of Adobe at all on my computer because of the Vista.
This has happened
Each time Firefox opened
http://support.Mozilla.com/en-us/KB/installing+a+previous+version+of+Firefox
-
I can't open the Adobe Premiere Pro that I bought in my cloud of Adobe creative. What should I do? There is no button 'Open', just like what the tutorials and I can't find it in my application files too.
Please see:
- Adobe first Pro CC crashing on the difficulty of starting - YouTube
- https://forums.Adobe.com/thread/1238178
Hope this helps you.
Concerning
Stéphane
-
How to unlock my iPhone so I can use another carrier?
How to unlock my iPhone so I can use another carrier?
The only person who can unlock the iPhone is the carrier that she is currently locked. You must apply to open for you.
Sites that claim to be able to unlock an iPhone for you are just scams.
-
a call from a guy that he was from microsoft and the computer has a virus
My friend got a call from a guy that he was from microsoft and that they had tried to him (by pop-up texts) she had a virus message. He was called to help set and wanted remote access, but would not give him any id to verify that it was legitimate, including any phone number or email address. He rang back the next day for a new attempt. He him verbally ordered a little in his computer saying that it had received these warnings pop up, but it will not allow access just in case. We believe that it is a scam. are us correct? and she inadvertently gave them access to certain form eventhough she has not allowed their remote access. He also could not give all the names of what virus he had which sounds too suspicious if they could detect the threat etc...
Fake phone calls to technical support
Calls unrequested telephone of this nature are almost always a common scam. Do not let them give any info, do not give access to your PC, not give them all the money and do not go to all the websites that they suggest. One moment.
Please see:
http://www.microsoft.com/en-gb/security/online-privacy/msname.aspx .
Microsoft issues never not solicited for phone calls of support or security.
These types of callers can use completely fictitious names or bogusly claim to be of real companies other than Microsoft as well.
-
My previous question was using a Flight Simulator on my HP laptop using Vista. Thanks for the reply, but I guess I have myself not clear. Vista will support the
Basic Flight Simulator manufactured by Real flight Manf and distributed by Great Plains model Manf. ?
Hi GoldwingerYW,
Yes, manufactured by actual flight Flight Simulator is supported by Windows Vista. For more information I suggest you to contact the manufacturer.
http://www.GPSoftware.com/
http://www.GPSoftware.com/realflightbasickb.shtml#installationNote: Since the next time try to pursue a particular issue in a single thread and do not create a new thread.
-
I use Acrobat DC and I'm unable to open a PDF file on a Web site. Whenever I click the link it says that my drive is not updated. I've updated the player several times now and it always used open. Other documents open on this Web site. http://www.cic.gc.ca/english/pdf/kits/forms/IMM1344E.pdf
It is an XFA file that is not detected by the PDF viewers in the web browser.
Please right click on this link http://www.cic.gc.ca/english/pdf/kits/forms/IMM1344E.pdf & select ' Save As... ', now, to save the PDF file to your desktop & open with Adobe Reader.
I'm sure that it will work as it worked on my end.
Kind regards
Nicos
-
Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any way around this? sounds to me ridiculous
Contacted Adobe Support and they recommended to configure the new Adobe ID?
-
How to disable a computer so I can use a third computer?
How to disable a computer so I can use a third computer?
Welcome to the Adobe Forum,
When install you it on the third computer or for the third time & when activate you, if it installed & activated twice already, there will be a possibility to disable previous computers, please click that.
Then it will allow you to activate on your new machine,
Now you can go to your first computer, disconnect & reconnect CC Desktopp app, launch any product, if there is no product to buy, which invites there will be an option for "software license", please click on the & sign.
It will reactivate the CC on the first machine.
You have already disabled it a machine, so you can activate it on the third computer.
Kind regards
Baudier
-
How and where should I send the log file in the crash Muse?
What muse crash - I see the message something like that... muse crash - send the log file for developers. and the ok"" button.
Hmm... strange - after google search as send muse log - I can't find solutions! I think that I find good plase to shere my question!
So... Developers - I can send you will break the log files to better muse! Tell me where to send!
See the answer of Zak in this post on the forum. Let us know if this helped.
Muse: error 1009: site does not open
Adobe Muse CC error 1009. Need help!
Thank you
Preran
-
Where can I download v 13 items that I bought? Adobe (my account) shows nothing.
Thank you
PES 10, 11, 12, 13 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
PE 10, 11, 12, 13 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html
Make sure that you save the Adobe software. If you have not purchased it through Adobe, they will not have a record of the purchase in your account.
-
Seems that my computer is running more slowly than normal. Went to Microsoft Fix & this was the answer I got from them. They will fix it if I pay a fee. I just don't have the money now. Help!
Thank you... Bette
HelloUse the startup clean and other methods to try to determine the cause of and eliminate
the questions.---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
where should I look to find an eprint forgotten email address?
I created my new printer as an eprint machine a few days ago so I can email prints to it. Unfortunately, I forgot the e-mail address that I gave him. Where should I click to see who? Or is the printer not somewhere?
Hi CAPSarge,
If you have saved the printer to www.eprint.com, you can locate printers email address after login. It will appear under the photo of your printer. If you do not register your printer to the ePrint Center, you must disable and then re-enable Web Services on your printer. This will generate a new code for you, like the old code will become invalid after 24 hours. If you need help with Web Services, please let me know what model of printer you have and I can walk through you that.
Maybe you are looking for
-
the file, history tabs are no longer top of the screen and available
on the top of my screen, there was a place to click on file, history, start the private and other navigation buttons... I clicked on something and they disappeared. don't know how to recover
-
Touchpad gestures works do not correctly on Z510 with W8.1
I think the problem is that if I go into settings / mouse and touchpad, it does not recognize that I have a touchpad of accuracy if I can't change anything. The important thing that is missing is edge by scanning and pinch of course etc. It used to w
-
I think I gave enough information in the question? First time here! Thank you, Tom D.
-
It is not focused on photo paper
My printer is HP Photosmart C4480 all-in-One Printer serial number: [redacted for privacy] product number: Q8388B and the solution Center HP tells me I have the latest software update. I use mostly hp 10 x 15 cm Photo paper to print .jpg picture, but
-
APPCRASH, Exception c0000005, 0a9e
Everytime I open the download folder, that this message keeps popping up: Problem event name: APPCRASH Application name: explorer.exe Application version: 6.1.7600.16450 Application timestamp: 4aeba271 Fault Module name: MSVCR80.dll Fault Module Vers