How are you supposed to activate your windows vista professional when he made a mistake 0x8007232B

Similar Questions

• How do you want to re - build windows vista 32-bit.

  How do you want to re - build windows vista 32-bit. My computer crashed while it was up-to-date.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  _________________________________________________________________

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• How do you download music on your RCA easy rip when you get a new hard drive?

  How do you download music on your RCA easy rip when you get a new hard drive? When I plug my mp3 player it is not do anything but wonder about stuff that's already on mymp3. I want to download music does not stuff that is already perfect?

  Hello

  1. How do you try to download music?

  2. that you get an error message when downloading music on the MP3 player?

  Click on the following link to synchronize the media player with your MP3 player.

  Set up a device to sync in Windows Media Player

  Hope that helps.

• How can you write a resume using windows Vista Home Basic?

  How can I write a resume using windows Vista Home Basic? I put t have microsoft word or office.

  Start menu -All Programs - Accessories - Wordpad.

• How are you supposed to go back to these guys here isolated?

  I would like to comment on stupid things, they need to fix.

  Is there a way to do it?

  Post here: Acrobat Feature Requests

  Two tips.

  1. don't expect a response. Suggestions go in a big pile resembling a day.

  2. be nice. You're dealing with human beings who do not like to be told that their stuff is stupid. Even if this is the case.

• How do you delete old backups of Windows Vista?

  I've been back up my Vista box by using Backup complete PC for quite a while now, and I was wondering how it is that you remove older backups when your backup disk is in full for another backup.

  Recently, I received the following error message:

  > The backup did not complete
  > successfully.
  >
  > An error has occurred.  What follows
  > information might help you solve the
  > error:
  >
  > There is not enough space to save the
  > backup files.  Free up disk space or
  > change your backup settings.
  > (0 x 81000005)

  I see nothing in the settings for the backup to change that.  I need to mount the backup to delete an old backup?  If so, where is this file which is located?

  Change backup settings means by selecting another type of backup that does not have a lot of space and you do not want to.  The backups on the backup drive are labeled with dates.  Just go to it and select the oldest and don't remove it as you would any other folder.  This should give you enough space to make the new backup.  If it isn't, then delete the next oldest backup, and then try again.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I transfer photos from your Windows Vista PC to Nexus 7 tablet?

  Original title: Mr
   
  MY PC WORKS WITH VISTA - HAVE A TABLET (NEXUS 7) HOW CAN I TRANSFER PHOTOS FROM MY PC TO THE NEXUS 7?

  Hi John,.

  Thanks for posting your query in Microsoft Community and we give the opportunity to help you.

  If you have any documents on your old computer, you must copy the files like documents or photos on your USB Flash drive first. Connect the USB stick or external hard drive to Nexus 7 tablet and manually copy photos or documents.

  Alternatively, you can use SkyDrive to access any file from anywhere. For more information, see the following article:

  SkyDrive advice to try - synchronization of files between all your computers

  http://Windows.Microsoft.com/en-in/SkyDrive/any-file-anywhere#1TC=T1

  Hope this information helps.

  Let us know if you encounter problems under Windows in the future. We will be happy to help you.

• How do you get or reset your password for Hotmail when you only have one account email & this is the account you can't access?

  It's a good thing I have my password to post this question. My question is for anyone who tries to reset their password to a Hotmail account, only to find the link for the reset will be sent to the same e-mail Hotmail account, they are unable to access because the password does not work or they forgot!  How can someone get the reset link if it is the only email address, you have?  What other options are there or are there any? Thank you!

  You can have a TEXT message sent to a mobile phone that you have nominated.

  You can designate an approved computer that can be used to reset your password.

  You can add security questions.

  Go to account.live.com and manage security information

• How many times can I activate my Windows Vista Ulitmate detail key on my PC even

  I format my PC frequently, I heard that you can activate a particular about 10 times on the same PC, is product key - it true?

  What types of changes in the computer, can affect my activation I hear by material as changes update graphic card...

  Thank you

  Rannvijay Kapoor

  "Rannvijay" wrote in message News: ed2f57b0-2972-48dd-8375-ddaf9bbce7a6...

  I format my PC frequently, I heard that you can activate a particular about 10 times on the same PC, is product key - it true?

  What types of changes in the computer, can affect my activation I hear by material as changes update graphic card...

  Thank you

  Rannvijay Kapoor

  Why?

  If for some reason you need to reformat frequently, then it would be better for you to create a system image and use it to return to the initial installation (fully activated) - it is much faster in general that reinstall all and updated.

  In general, you can change just about any material except the motherboard without requiring a reinstall - change the motherboard will generally result in reinstalling Windows and reactivation of.

  As long as the material for the initial installation is always present, no additional hardware can be changed at will - if you start to change the initial material, so we can, if you change enough, be asked to reactivate (Tip - always leave the original NIC installed, even if disabled in Windows, because it has a higher probability of causing a request for reactivation than almost anything else).

  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• How can you make Maplestory compatible with Windows Vista?

  I have a 17 Studio and just download Maplestory successfully. When I try to play the game, it says 'known complatibility issue blah blah blah'... and then said the game is not compatible. ?? Obviously, I'm not the only one facing this problem, and I think it's shocking the heart of Maplers everywhere. Thank you!!!

  Click with the right button on the Launcher, click Properties, and then select the Compatibility tab and choose the Windows XP Sp2 compatibility option and it will work for you.

• How do activate you the built-in in Windows Vista administrator account?

  How do activate you the built-in in Windows Vista administrator account?

  1. http://technet.microsoft.com/en-us/library/cc766343 (WS.10) .aspx

  2. http://support.microsoft.com/kb/555910

  To activate the built-in Administrator account, follow these steps:
  1. click Startand type cmd in the Search boxof start.
  2. in the list of search results, right-click Guest, and then click run as administrator.
  3. When you are prompted by user account control, click continue.
  4. at the command prompt, type net user administrator / Active: Yesand then press ENTER.
  5. type net user administrator , , and then press ENTER.
  Note: Please replace the tag with passwords which you want to set for the administrator account.
  6. type exitand press ENTER.
  7 log off the current user account.

• How to create a wifi Hotspot on your Window Vista?

  I surfed the Internet on how to create a Wifi Hotspot on Windows Vista Edition Home Premium, but nothing works...

  They show an option on the create an Ad-hoc connection after creating "activate Internet sharing, but all it by creating no option appears on the window."

  Hey

  Try these steps to create an access point in Windows Vista
  
  Step 1: Plug the Ethernet cable into one of the laptops.
  Step 2 - on the laptop you plugged in, press Windows Start button and open "Control Panel", go to "Network and Internet" and then go into "network and sharing Center."
  Step 3 - Choose "Set up a connection or network" and choose to create an ad - hoc network.
  Step 4: configure your network name and password WEP2 to protect.
  Step 5 - have the second search for laptop for wifi stations.
  Step 6 - ask them to choose the one with the name that you created, and enter the password you used.
  Step 7 - two laptops should now be able to use internet safely.

  Bravo!

• Do I need another new Windows Update to activate my Windows Vista to access the free secure recommended downloadable program for downloading various files and any other information you want?

  Original title: I need an another new Windows Update to activate my Windows Vista to access the downloadable recommended secure free program for downloading various files and any other information you want? Thank you! Randle

  Please help if you have the time giving me the name of a free secure downloadable software that works for Windows Vista, when the word is not on my PC for

  downloadind attached to power open, save, display, print and other means that this downloadable can help. I would be very grateful for your help! I works but not Word and PowerPoint if you have any suggestions that will be very solve my delimma of not be able to successfully download these things I just Gillies

  Your expert advice, patience, attention to my request, time, are all valuable and appreciated! Thanks again and have a wonderful day! Randle

  Hello Randle,

  You can use your favorite search engine & download any third-party software that might be used to.

  
  Note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  Hope the helps of information.

• How can I decrypt my files on windows vista that are coded on windows xp? __

  How can I decrypt my files on windows vista that are coded on windows xp?
  I tried my best, but I can't solve my problem that the comis is error that
  (an error occurred applying attributes to the file: the location of the file is displayed then access is denied is written)
  There are 4 options ignore, ignore all, tryagain and cancel) Please help me

  If you did not save your certificates to external media before you reinstalled XP, data is almost certainly inaccessible forever. You can contact Elcomsoft to see if their software can help, but there is no backdoor to EFS encryption. This is why you should always follow best practices and know what you're doing * before * encrypt you anything. A lesson of sad and difficult.

  http://www.ElcomSoft.com/aefsdr.html
  http://technet.Microsoft.com/en-us/library/bb457116.aspx - system file (MS) using EFS

  MS - MVP - Elephant Boy computers - don't panic!

• "do you want to activate your reader now?" - Cyberlink wants uninstalled HP MediaSmart

  Have a dv8t-1000. For the first time I watch a blu - ray (or DVD) movie. He asks "do you want to activate your reader now? So I clicked 'yes '. IE open the cyberlink Web site. Downloaded file "HP - CNB.v3309_1621_Medi_HTS090825 - 02_Normal.exe.» Run this file and I get the following message "HP MediaSmart DVD has been detected in your system. Please uninstall first. "What? So I restart the entire process and say 'No' to activate the player. He keeps asking me to "check for updates". It's an endless loop of questions. He will not play the movie. I ran HP Support Assistant, who says that everything is fine. What's wrong?

  Any help would be greatly appreciated.

  Paul

  Hi Paul,.

  This assumes that you are running Windows 7.

  Download and install Revo Uninstaller from the link below.

  http://www.revouninstaller.com/download-freeware-version.php

  Run revo and use it to uninstall your HP MediaSmart DVD software.  Make a right click on the program icon you want to remove and select uninstall.  During the process, that you may be asked to remove the registry entries, simply select all and then click on remove.  Do the same for any left over files and folders.  Once the uninstall is complete, reboot the PC.

  Then, download the latest installer for MediaSmart DVD on the link below and save it to your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp50501-51000/sp50935.exe

  If you do not have an extraction utility installed, download and install 7-Zip.  Right click on the installation program you download, select Extract 7 - Zip, select the files, and then click Ok.  Open the newly extracted folder, open src and scroll down until you see the application setup ( 6th in the background with a size of 310 KB ).  This Application Configuration right click and select "Run as Administrator" to launch the installation.  Once the installation is complete, restart the computer and see if you can now read your Blu - ray discs.

  Kind regards

  DP - K