How can, during the collection of data, start a new column in my table every 100 data points?

Similar Questions

• How to find the value max and min for each column in a table 2d?

  How to find the value max and min for each column in a table 2d?

  For example, in the table max/min for the first three columns would be 45/23, 14/10, 80/67.

  Thank you

  Chuck,

  With color on your bars, you should have enough experience to understand this.

  You're a loop in the table already.  Now you just need a function like table Max and min. loop.  And you may need to transpose the table 2D.

• How can change the bookmarks system wide for each new user?

  I wish that every new user who creates a count in a Debian linux system to achieve a specific set of bookmarks. I can't find where to put my custom bookmarks.html file to do this.

  Create a folder/defaults/profile in the Firefox installation folder and place a bookmarks.html file in this folder.
  
  This is the same folder of models for the new profiles that used in previous versions of Firefox, but all files that were there, then are now in archive omni.jar and the profiles folder in are no longer present.

• How to write the trigger for update or delete multiple columns in a table?

  Hello

  I create one in the form of table of sample_emp. In that, every time I want to change of name, team_id, team_leader_id, supervisor_id, manager_id it must store the update-able and old values of those in the job_history table. When I write the trigger for which it shows "ORA-04082 new or the old value not table level triggers. Here is my emp_table. My table also similar job_history like this. Need your help.

  Header 1	Header 2	Header 3	Header 4	Header 5	Heading 6	Heading 7	8 header	Header 9
  EMP_ID	EMP_NAME	DESIGNATION	TEAM_ID	TEAM_LEADER_ID	EMPLOYEE	MANAGER_ID	HIRE_DATE	RELIEVED_DATE

  --

  Thank you.

  Hi Joel,.

  Venky_prs wrote:

  Hello

  I create one in the form of table of sample_emp. In that, every time I want to change of name, team_id, team_leader_id, supervisor_id, manager_id it must store the update-able and old values of those in the job_history table. When I write the trigger for which it shows "ORA-04082 new or the old value not table level triggers. Here is my emp_table. My table also similar job_history like this. Need your help.

  Header 1	Header 2	Header 3	Header 4	Header 5	Heading 6	Heading 7	8 header	Header 9
  EMP_ID	EMP_NAME	DESIGNATION	TEAM_ID	TEAM_LEADER_ID	EMPLOYEE	MANAGER_ID	HIRE_DATE	RELIEVED_DATE

  --

  Thank you.

  You can try something like this given below to complete the historical table on update and delete.

  create or replace TRIGGER  "CLONE_EMP_UPDATE_DELETE"
  BEFORE DELETE OR UPDATE ON EMP
  FOR EACH ROW
  DECLARE
      PRAGMA autonomous_transaction;
  BEGIN
  INSERT INTO JOB_HISTORY("EMP_ID","EMP_NAME","DESIGNATION","TEAM_ID","TEAM_LEADER_ID","SUPERVISOR_ID","MANAGER_ID"
  ,"HIRE_DATE","RELIEVED_DATE")
    VALUES(:OLD.EMP_ID,:OLD.EMP_NAME,:OLD.DESIGNATION,:OLD.TEAM_ID,:OLD.TEAM_LEADER_ID,:OLD.SUPERVISOR_ID,
  :OLD.MANAGER_ID,:OLD.HIRE_DATE,
  :OLD.RELIEVED_DATE);
  COMMIT;
  END;
  

  Hope this helps you,

  Kind regards

  Jitendra

• Hi, after all stages of extraction of data from oracle to oracle during the execution of command "start extract ext1" his error giving the Manager does not work, can you please help me. Thank you

  Hi, after all stages of extraction of data from oracle to oracle during the execution of command "start extract ext1" his error giving this handler does not run both source and target, can you please help me. Thank you

  Hello

  The setting should be as below, and not only the port number should be...

  PORT 7809

  Kind regards

  Veera

• HP Elitebook 8740w: How can remove the text / name of the company that is displayed during the boot process?

  Hello

  I bought my work laptop from my employer. During the startup of my employer's legal name is still displayed on the splash screen ' "(the screen with the HP logo).

  -J' already started back and ran the EREPLOGO. EXE utility to remove the logo (ereplogo.exe/e). The utility said that the logo has been removed;

  -in the BIOS 'view custom logo' is unchecked, so it will not use an image of the partition tools hp;

  However, during the startup the company name is still displayed on the top of the screen... :-(

  (1) how can I change this text to start or remove it completely?

  (2) what can I do to display the specifications of hardware during startup instead of this "splash screen"?

  Thanks in advance,

  SJW

  PS I have the latest BIOS (F.60 Rev.A, November 30, 2015)

  Hello

  I managed to change the line of text with the BiosConfigUtility64.exe.

  With "BiosConfigUtility64 getconfig:config.txt", you can write all the values in the bios and a text file with "BiosConfigUtility64 setconfig.config.txt", you can set all the values after you change the values you want to change. In my case, that I had to change the value of "property tag", which is the value that appears in the home screen during the boot process.

  Later, I discovered the tag 'property' can also be changed under the Security tab of the configuration of the BIOS (F10) normal... until I knew what the property tag, I associate the line of text to security so I did find the text before :-) field

  Best regards

  SJW

• How can I recharge my sim data in the air of the ipad 2 and activate?

  How can I recharge my sim data in the air of the ipad 2 and activate?

  Hi asherfromqatar,

  The resources below explains how to activate cellular data on your iPad 2 Air service.

  Activate the service of cellular data on your iPad iPad, iPad 2 Air and Pro 3 mini or later

  Check or change your cellular data plan

  To check the status of your cellular data or make changes to your plan, go to settings > cellular data.

  To add another data plan to your iPad, tap Settings > cellular data > Data Plan > add a new Plan.

  When you activate a cell data with some carriers plan, your SIM Apple could be dedicated to the corporate network. Your iPad is unlocked so that you can buy an another SIM Apple or a standard carrier nano-SIM allows you to change networks. Learn more about dedicated SIMs.

  Get help

  Get help with your Apple SIM if you have one of these problems:

  • You receive an alert on your Apple SIM
  • You cannot activate a service or can't find certain support
  • You cannot connect to the cellular data network

  Take care

• How can I find out what programs start or stop to start the computer?

  How can I find out what programs start or stop to start the computer? Now there's like 68 programs that start at startup of the computer, I know that this is the way to much, I just need if bought a laptop with windows7premium installed and the problem im having is that for a lot of programs running at startup the computer does runslow and being online is difficult. Can I just go back to the factory because im settings only to learn about computers. Any help would be late thanks all sorts niceome here

  Original title: need HELP

  Go in run and msconfig!

  Under the control of services tab hide all microsoft processes
  These are the programs that are running at startup you can go through the menu of your program and configure each individually to run at startup.
  If you decide it's not worth having to go to control panel and then programs and then decide to uninstall the program.
  If you decide to use your drive to factory restore do not forget to install the programs you need.

• How to set the time of data collection for information Publisher report

  Hello everyone,

  So, I'm trying to set up a report, which contains some information of tablespace. The report must be sent to my e-mail account around 07:00 every day, so I have an overview if we run into a few problems with some full tablespaces. the report and mail notification works well but my only problem is, the data are not updated. There is a comment under each data table in my report which said that the data had been updated on 8 to 13 hours ago according to the target database. is there a way I can trigger the update of data report on a specific time? So I can update the data before you run the report job every morning around 07:00? I'm totally noob, so I hope someone can help me, I tried to google it but I couldn't find anything useful.

  Unfortunately, there is really no good way to 'schedule' collection for this because it is perceived with a dozen of other data points and likely to cause problems.   What you could do, is create a metric custom extension with query data file you need (simple Dungeon it do not go beyond what you really need to prevent performance problems), deploy the metric on all target databases, then disable collection of gui (metrics and collection parameters) and cron the collection to run at a period determined using emctl control agent runCollection : .   You can then create a report about the data collected in mgmt$ metric_current.

• How can I get audio to not start when the button is clicked?

  I am new to adding audio to slides, buttons, click boxes.  Import the recorded voice on the overall slide of files sounds easy enough.  However, there are several buttons that display a legend I want audio to not start when the button is clicked.  I added audio just for this button, but it starts when the slide begins.

  How can I get audio to not start when the button is clicked?

  Hello

  Audio playback when the assigned object with the audio appears. That's why hear you when the button appears.

  Try to assign audio instead to the object that is displayed when you click the button. Perhaps the legend.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• In the date picker, how can I default to select * dates if the user has...

  In the date picker, how can I default to select * dates if the user does not select a date.
  Thank you
  Doug

  Doug,

  Now lets say l want everything
  

  Could you post some sample data and the output you want to get... ? It would be very easy to understand the requirements...

  When you mean everything, I guess you need all possible dates between date1 and date2.

  You can use... (to asktom.oracle.com).

    1  select to_date('12-jan-2009','DD-MON-YYYY') + rownum -1
    2    from ALL_OBJECTS
    3    where rownum <= (to_date('20-jan-2009','dd-mon-yyyy') -
    4*                     to_date('12-jan-2009','DD-MON-YYYY') +1 )
  sql> /
  
  TO_DATE('
  ---------
  12-JAN-09
  13-JAN-09
  14-JAN-09
  15-JAN-09
  16-JAN-09
  17-JAN-09
  18-JAN-09
  19-JAN-09
  20-JAN-09
  
  9 rows selected.
  
  For your case, since you have date1 and date2...
  
  select to_date(:p12_date1,'DD-MON-YYYY') + rownum -1
    from ALL_OBJECTS
    where rownum <= (to_date(:p12_date2,'dd-mon-yyyy') -
                      to_date(:p12_date1,'DD-MON-YYYY') +1 )
  

  Should work... in my opinion... Have not tested the other by their Summit.

  Is that what you're looking for... ?? If no, please give details...

  Thank you
  Rajesh.

• How can change the end of thick disk when a virtual machine has been placed on the disk?

  After you have moved the virtual computer to another stage, chose the thin disk bad. Now, the virtual machine cannot start. the error message says that it must be thick for clustering. So, I need to change it back if possible. Then I moved it back and thick chosed. But, after that, I got a same error. So, after you move, the atatuse disk was not be changed. Is it a way not both directions? How can change the staus thin to thick?

  Thank you!

  George

  Hello George,.

  You can also convert virtual disks in eagerzeroedthick from the command line.

  vmkfstools-j VMname.vmdk allows to convert a thin disk in eagerzeroedthick

  vmkfstools k VMname.vmdk that will do it on a thick disk

  It can also work for a thin disk, click with the right button on the vmdk in browser data store, and then click 'inflate '.

  André

• Columns of folder: by default, how can return the first column 'Name' without having to move it manually every time?

  Something's happened awhile and when I create a folder which appears the first column is the column 'Date modified '. By default, how can return the first column 'Name' without having to move it manually every time?

  Hello

  I suggest you to visit these links and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-files-and-folders#section_4

  http://Windows.Microsoft.com/en-us/Windows-Vista/folders-frequently-asked-questions

  It will be useful.

• How can set the background color of the status bar?

  Quote from the old forum:

  Comments: comments	How can set the background color of the status bar? Posted the: July 17, 2008 02:56
  	How can set the background color of the status bar? Using this code for the status bar: LabelField statusField = new LabelField ("Good Morning", LabelField.USE_ALL_WIDTH |) LabelField.NON_FOCUSABLE | LabelField.HCENTER) { int _backgroundColour = Color.LIGHTGREEN; public void paint (Graphics g) { g.setBackgroundColor (Color.RED); g.Clear (); Super.Paint (g); } }; Font defaultfont = Font.getDefault (); Police smallfont = defaultfont.derive (Font.PLAIN, 12); statusField.setFont (smallfont); setStatus (statusField);

  When I ran the code you have above, my status background color was red.  Is not what you see?  If so, please provide the BlackBerry model and software version that you are testing.  You can find this under Options.

  Or if you try to do something else, please provide details.

  I tested this in the BlackBerry Simulator included with version 4.5.0 BlackBerry JDE (4.5.0.44).

  To do this in version 4.1, first call getColor and save the current color.  Then call setColor, setting the color to the color you want to use for the background.  After this call call fillRect, starting with 0, 0 and go to the size of the field (use this.getWidth () and this.getHeight () to get this).  This must fill in the field with your specified color.

  To allow the drawing of the default content of the field call setColor once again, passing in the original color, then call super.paint.

• How can I select a different data store for vm swap files?

  In Esxi 5.5, how can set up a separate data for the swapsfiles store.

  5.5, default will be in the same data store