How can I activate my Microsoft windows?

Similar Questions

• How can I activate telnet in Windows XP Professional?

  I've seen several references to XP Professional with a built-in telnet server and the 'help and support' section seems to indicate that as well, but I darn if I can find detailed instructions on how the hell activate you it after 20 minutes of Googling to pages with forums and ask the same question, people usually being will have a link to the technet database. I tried to look for it, but kept getting instructions for Server 2003 who say to test with telnet in XP command line control.

  I want just a less cumbersome way to stop my main computer of the notebook on the cable network (in my room, the computer and I have a fake ethernet cable so I can access it from the bed I have wireless at home). I want to try telnet as it is less involved than remote desktop, and I can't do 'shutdown m \\slickswintel' at work (http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking/how-do-i-use-the-shutdown-command-to-shut-down/645a45ee-d964-4f87-8c7e-98f446332c0e).

  I thought I'd try to telnet. If I can limit the 192.168.1.X subnet traffic security concerns shouldn't be a problem. Yes, I am well aware of the limitations and why Telnet has been replaced by SSH. It would be a problem if I was trying to participate via the internet, rather than an inTRAnet of small LAN home network with a router/switch device that manages the internet gateway.

  Could someone, give me a link to instructions for XP Professional? I don't even remember if I ever tried to set up telnet on Windows what it (server or workstation, even if it's a piece of cake to put in place under Linux (and SSH is simple too).

  My goal is to turn off the computer from across the room without getting up from the bed, so I can stick this laptop on the bedside table and to sleep with as little hassle as possible.
  Before suggesting the m \\slickswintel stop, read this:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/how-do-i-use-the-shutdown-command-to-shut-down/645a45ee-D964-4f87-8c7e-98f446332c0e

  I found this, which worked:
  http://www.Petri.co.il/enable_telnet_on_windows_2003.htm

  The essential line has been "tlntadmn config s =-NTLM '.
  I do not understand why I needed to disable NTLM authentication when both computers have been running Windows XP Professional, which had been upgraded to SP3. They were on the same switch as well. The firewall on the router/switch stateless only works on inbound connections from external (internet) interface, and I'm sure that it is rather a feature of the NAT because it does seem that the vs TCP UDP and port number...

• How can I get my microsoft windows xp to read my 4GB lexar memory card?

  When I put my memory card in the computer, it does not even recognize that something is there? How can I get my computer to read?

  If you have read never managed a map upper memory to 1 GB (or perhaps 2 GB), the chances are very high that the problem is that your computer has a memory card reader that is too old to read the new SDHC cards (4 GB and more).  In this case, you will need to purchase an external card reader.  They are not very expensive.  For example--> http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=4024&IsNodeId=1&Description=memory%20card%20reader%20usb&name=%240%20-%20%2410&Order=BESTMATCH

  If you have Windows XP service pack 3 (which you should have installed a long time ago), you already have the necessary software.  However, if you only XP service pack 2, see--> http://support.microsoft.com/kb/934428

• How can I activate in the window manager for areo glass can be activated?

  After installation ATS for Microsoft Fix - It, I went to... check areo glass and he pointed out that my 'Windows Manager' was not enabled.   How can I go on the activation of the 'Windows Manager'?

  Execute plug-in software component services MMC (services.msc) find the two services, make a double click and set the startup type to automatic. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How can I activate the microsoft update service?

  I need to get the update from Microsoft for other products.  I already have Windows Update, but also need Microsoft Update.  Error message says:

  Microsoft Update could not be installed on your computer
  Make sure that you log on as an administrator or as a member of the Administrators group, and then try again.
  More troubleshooting options

  • If your computer is connected to a network and the problem persists, contact your system administrator to see if your Microsoft Update settings are managed by using Group Policy.
  • If your computer is not connected to a network, or if your system administrator has not disabled Microsoft Update, check if the Windows Update service is disabled or stopped. For information about how to start a service, search help and Support on your computer. Microsoft Update could not be installed on your computer
    
    Make sure that you log on as an administrator or as a member of the Administrators group, and then try again.
    Note: If you encounter problems with the installation of Microsoft Update, you can continue to get updates for your computer by going to Windows Update in control Panel.
  •  
  •  
  •  
  • 
    I do not understand the instructions above.  I have log on as an administrator.  Where exactly is the place to solve this problem?  Thanks a lot for helping me.

  Yes, Mr. Difficulté tried it 50202 and nothing worked.  I was looking forward to a solution, so I ended up doing a system restore complete with discs that I did when I had this computer.  Then I did an inplace upgrade.  Still so many problems.  After hours and hours, I finally got to meet up with a working computer.  Thanks for your help.  You know much more that I do all of this.

• How can I remove a microsoft Windows 8 PC account

  My father has been implemented of his account on our new Windows 8 PC and it has misspelled accidentally from his account of Microsoft and now it is stuck on the computer and we cannot remove it from the computer

  If you do not know the password, you can request the password to someone you think that knows. But if you want to PERMANENTLY DELETE THE ACCOUNT CONTAINING MICROSOFT USER ACCOUNT, you can create a new user with the administrator type account and delete the old user account. Note that all applications that you have installed on the old account will be deleted, but you can decide to keep personal files.

  1. Open the charm > settings > change the settings of the PC.
  2. In the 'Users' section, click or press 'add user '.
  3. Select the account type. If the Microsoft account, enter an address of outgoing e-mail Microsoft account or click on "register for a Microsoft account" If you do not. If Local account, click on connect without a Microsoft account > Local account. Follow the steps below.
  4. When you are finished, do not go to the new user account. Go to Desktop > charm > Control Panel > user account > manage another account > select the new user account.
  5. Click or tap on change the account type. Select administrator and click or type to change the account type.
  6. Sign out of the current account.
  7. On the connection page, select the new user account, enter the password if you have created a.
  8. Go to Desktop > charm > Control Panel > user account > manage another account > select the old user account.
  9. Click or tap on delete the user account.
  10. Decide if you want to keep the files from the old account. If you want, click on keep files, if you are not, click on delete files.
  11. Then click on remove account.

  If you have a user account that exists with the right administrator

  1. Go to Desktop > charm > Control Panel > user account > manage another account > select the old user account.
  2. Click or tap on delete the user account.
  3. Decide if you want to keep the files from the old account. If you want, click on keep files, if you are not, click on delete files.
  4. Then click on remove account.

• How can I activate my raildriver work with MSTS (Microsoft Train Simulator) on Windows 7.

  Original title:

  Microsoft Train Simulator AND Raildriver Desktop Cab Controller Train running on Windows 7, Home Premium / 64 bit OS

  How can I activate my raildriver work with MSTS (Microsoft Train Simulator) on Windows 7, Home Premium / 64-bit operating system?

  www.RailDriver.com ceased to support the Windows 7 feature running MSTS until someone out there in the windows 7 community of players have ideas that could help me?

  Hi Christophe,

  Sorry for the delay in response.

  To work around the problem, you can try to run the software in compatibility mode and check if it works.

  For more information on the same check this link:

  http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run

  I hope this helps.

• How can I activate my Windows Security Center Service?

  Original title: windows security...
  How can I activate my Windows Security Center Service? Whenever I press the button to turn it on it says that it cannot be started. What should I do?

  Hello

  Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
  ThreatFire are some. What antivirus/antispyware/security products you have on machine now. And
  who have you ever on it, even if you have uninstalled them. (These leave the remains that can cause some)
  strange questions.)

  Start - type in the search-> find abuse at top box - click on - RUN AS ADMIN

  Service set to AUTOMATIC (delayed start) Security Center and BEGAN to
  Chech also the serices dependent as below.

  References to Vista also apply to Windows 7.
  
  Start - type in the search box-> find Services at top - click right on - RUN AS ADMIN

  Check the default services and dependencies to ensure that they are running.
  http://wiki.blackviper.com/wiki/Security_Center

  You may need to redefine ALL the Services on their default values.

  Windows 7
  http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989

  Windows 7 Service Pack 1
  http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/

  Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

  How to fix Vista Reporting incorrect information Security Center
  http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

  How to disable or enable the Security Center in Vista
  http://www.Vistax64.com/tutorials/67737-Security-Center.html

  This thread might help as it might be a permissions problem.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/

  ====================================

  To look for the Windows 7 KB and responses for Solutions (most are above).

  Searck of Ko &-> 1058 Security Center
  http://support.Microsoft.com/search/default.aspx?mode=a&query=1058+Security+Center&SPID=14019&catalog=LCID%3D1033&AST=28&RES=10

  Search KB &-> 1079 Security Center
  http://support.Microsoft.com/search/default.aspx?mode=a&query=1079+Security+Center&SPID=14019&catalog=LCID%3D1033&AST=28&RES=10

  I hope this helps.

• How can I activate my genuine copy of Windows XP Professional? When I try it says: "activation could not be completed right now online.

  original title: How can I activate my genuine copy of Windows XP Professional?

  Hello

  I wonder if there is another way to activate my genuine copy of Windows XP Professional, because when I try to activate via the activate Windows

  Assistant, all I get is a message saying that the 'online activation could not be completed at this time. "

  Its weird because this is the first time I met this kind of problem after format and do a clean install of Windows XP in which, incidentally, I do

  every year since 2006. (This is to keep my computer and working properly).

  And also, if I tried to validate my copy of Windows XP by using Mozilla Firefox and Internet Explorer 8, but I keep getting "Validation failed".

  Any ideas what could possibly cause this? coz I already formatted my computer three times since yesterday in the hope that it could solve the problem, but with no luck.

  I hope someone could help me with this.

  Thank you and happy holidays to all.

  See you soon!

  Hello

  Please help us, but it seems to be a problem with the end of Microsoft after all. Perhaps, they were low maintenance, when I tried to activate my Windows XP Pro yesterday.

  In any case, my Windows XP Pro is now enabled.

  Thank you and happy holidays!

  See you soon!

• How can I activate Windows Defender when I receive 0x800106ba

  How can I activate Windows defender when I receive 0x800106ba? I got IE9 and use a Vista home

  Hello

  Are you running MSE or other antivirus/security programs stop Windows Defender from
  running? Whether Windows Defender is blocked from running by them. McAfee, AVG, and
  others do this. MSE includes Windows Defender features in it run
  separately would be redundant.

  ------------------------------------------------

  Troubleshooting of Windows Defender
  http://support.Microsoft.com/kb/555957

  "%ProgramFiles%\Windows Defender\MsAsCui.exe" is the folder of the default Defender

  Start - type in the search box-> Windows Defender - find top - make a right click on it.
  RUN AS ADMIN

  If no joy using Start - computer or Windows Explorer to access this folder and create a
  Shortcut to put on the desktop and the Start Menu. You can also right click on a shortcut this and
  see if they point to here.

  Goal
  "%ProgramFiles%\Windows Defender\MsAsCui.exe".

  Start in
  "%ProgramFiles%\Windows defender.

  How to enable or disable the Windows Defender
  http://www.Vistax64.com/tutorials/93118-Windows-Defender-off.html

  --------------------------------------

  Maybe something here if necessary:

  What is display / causing the error message? Some anitvirus/security/antispyware products can
  cause this error. On those who use you, including those that your never had even those
  uninstalled (the remnants can cause problems). McAfee is just an example of what many can do.

  Start - type in the search box - Services - find top - Right Click - Run as Admin

  Windows Defender - value STARTED and AUTOMATIC

  or set MANUAL and STOPPED if necessary

  Fix for the problem of 800106ba.
  http://support.Microsoft.com/kb/931849

  Error (an example) of McAfee report.
  http://service.McAfee.com/faqdocument.aspx?ID=TS100610&lang=en_US&prior_tid=2&AnswerID=16777216&Turl==http://KB.McAfee.com/InfoCenter/index?page%3Dcontent%26id%3DTS100610%26actp%3Dsearch

  Check also:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/574fb871-034C-4B42-B800-328af16a9177

  --------------------------------------------------------------------------------------------------

  If you need to control startup programs:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• tried to activate my windows 7 since the time that I change my motherboard trying online and phone how can I activate it

  been trying to activate my windows 7 since the time I change my card mother try online and phone when it comes to giving the confirmation ID it say due to an error could not proceed. When you try to install Windows 7 I enter my product key and get Windows error repeatedly warns me that my product is a counterfeit. I tried to activate Windows 7 online, only to be returned with the error Code how can I activate it now because I bought at a retail store and not had this problem then this started from the day my motherboard was cause of change that it was under warranty how to activate now.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• How can I activate back my administrator account after my windows automatically restarts with an administrator.user (new) account and so on

  How can I activate back my administrator account after my windows automatically restarts with an administrator.user (new) account and so on.

  I got this without my notice:
  Administrator
  Administrator.User
  Administrator.User.000
  Now, I want to go back to my old files with the first administrator account. Also, I would like to know why.

  Hello

  Thanks for the reply.

  I suggest you to refer to this article to check if this help.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

   

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

   

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Windows that display no real sign and how can I activate it now? Display of error 0xC004c008

  Windows that display no real sign and how can I activate it now? Display of error 0xC004c008

  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-0xC004C008

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your problem clearly to the support person.

• How can I print my Microsoft Surface running Windows 8 RT?

  How can I print my Microsoft Surface running Windows 8 RT?

  Most new wireless printers have an impression of the Microsoft Surface with Windows 8 RT problem.  Everything you need to make these printers is tell them to print and they will.  Older wireless, Ethernet and USB printers should not have driver officially supported in Windows 8 RT, but there is a way to get the printer working.  There are different requirements depending on how the printer is connected to the Surface.

  Note: All the steps below are only for other HP ink Jet, DeskJet, PhotoSmart and OfficeJet printers.  These steps are not for Laserjet printers or printers from other manufacturers.  These steps may not work for all inkjet printers.  If these steps do not work, try different drivers in the list until you find the one that works (you'll understand what I mean once you follow the steps below).  If none of the drivers work, your printer does not work with the Surface.

  For (Ethernet or wireless) network printers, all you need is Surface keyboard or a USB keyboard to connect to the Surface.  It is simply what you have to type more easy to type.  You will also need to have the Surface and the printer connected to the same network.

  1. From the right edge, drag your finger to the left on the screen Surface to appear charms bar.
  2. Press search.
  3. Under the search box, tap Settings.
  4. In the search box, type devices and printers.
  5. Press devices and printers.
  6. Contact add a printer.
  7. Tap "my printer is not listed.
  8. Select the TCP/IP option and then press Next.
  9. Enter the IP address of the printer and press Next.  Note: You can get this from the network printer, or list DHCP in your router Configuration Page.
  10. The Surface will locate the printer and try to install it.  Installation fails, and the Surface will be asked what you want to do, look on the internet for the driver, or manually install the driver.  Choose to install the driver yourself.
  11. Press 'I want to choose from a list of drivers.
  12. If no driver is in the list, make sure that the box next to 'Show compatible drivers' is not checked.
  13. Choose HP in the production list.
  14. Choose driver DeskJet PCL 3 class in the list of drivers.  If this driver does not work, try using the Photosmart PCL3 driver, or the driver Officejet PCL 3.  (Thanks JonW for letting me know about these other alternates.) )
  15. Press Next.
  16. Tap Finish.
  17. Test print.

  For USB connected printers, need you a USB cable to connect the printer to the computer.

  1. Connect the printer to the computer via USB.
  2. Windows will try to find the drivers but will not be able to.
  3. Here Windows may ask you if you want to choose the driver to install.  If she go to step 14 below.
  4. From the right edge, drag your finger to the left on the screen Surface to appear charms bar.
  5. Press search.
  6. Under the search box, tap Settings.
  7. In the search box, type Device Manager.
  8. Press Device Manager.
  9. Tap view and select Show Hidden.
  10. Search for the printer in Device Manager.  It should be in the other devices section with a yellow warning next to her sign.
  11. Select the printer in the list.
  12. Press Action.
  13. Update driver to touch or to install any what it displays.
  14. The Surface will ask you what you want to do, look on the internet for the driver, or manually install the driver.  Choose to install the driver yourself.
  15. Press 'I want to choose from a list of drivers.
  16. If no driver is in the list, make sure that the box next to 'Show compatible drivers' is not checked.
  17. Choose HP in the production list.
  18. Choose driver DeskJet PCL 3 class in the list of drivers.  If this driver does not work, try using the Photosmart PCL3 driver, or the driver Officejet PCL 3.  (Thanks JonW for letting me know about these other alternates.)  )
  19. Press Next.
  20. Tap Finish.
  21. Test print.

  I hope this helps.

• I want to install a HD floppy Microsoft 2002, I have the keycodes, how can I do this? Windows XP, Works Suite 2002.

  I want to install a HD floppy Microsoft 2002, I have the keycodes, how can I do this? Windows XP, Works Suite 2002.

  Hi, Edward.

  Follow the steps listed here