How can I activate my touch Pad? a light is on and the touch pad does not work

Similar Questions

• I have a Hp and the micro build does not work how to fix this?

  Can someone help me please? I have a HP T5800 and the micro build does not work how can I solve this problem?

  Hello

  Check with HP, their drivers support and documentation online and ask in the forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  It's probably the pilots who are responsible and who may not really be later or they need to be
  re-installed anyway. The best way is to manually review using the methods below.

  References to Vista also apply to Windows 7.
  
  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
  Audio definition (this is an example and you can have an other name/maker).

  Write the description and the model double click on it - tab drivers - write down
  Version. Now click on update drivers who cannot do anything as MS is far behind certifying
  drivers. Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver
  stack.

  You can have the default windows or a former certified pilot and it's all or part of the
  issue.

  Now, go to the site of the manufacturer of the system and get the latest Audio/Sound drivers - download - SAVE - go to
  where you put - right-click on Reboot - RUN AS ADMIN-

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
  operating mode. Download - SAVE - go to where you put them - click on - RUN AS
  ADMIN - Reboot

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is less than
  in Windows XP (or Vista)
  http://support.Microsoft.com/kb/973446

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I installed Vista in a Virtualbox VM and the product key does not work, how to fix this? I use the same product key supplied with the computer originally.

  I bought a Dell Precision T3400 of Dell Financial Services and it came with Vista Business installed.  I installed a new hard drive and installed Vista in a Virtualbox VM by using the recovery disk that came with the computer, and the product key does not work for activation.  I get a message that says I need to activate Windows, but he says that the product key is not valid.  How can I fix it?

  Thank you

  If you have reinstalled the OEM of Vista Business copy on the new hard drive, as Bill says you can't also use it in a virtual machine.

  You can only reuse your OEM of Vista professional copy if it is no longer used on the computer. Do you have what operating system installed on the new hard drive? It was an upgrade copy or complete the license?

  If you used a license to upgrade to another edition of Windows to replace your copy of company then Vista Business license is still in use (for upgrade) and you cannot reuse it in your virtual machine.

  However if you replaced Vista business with a copy of the full license of another edition then you are able to use the OEM copy in a virtual machine, but only on the same computer. You must use the product key from COA to the label on the computer. The product key is put in the copy OEM cannot find the SLIC table on the host motherboard. You must use the phone activation from within the virtual machine. Click on start in Vista Business and typing "slui 4. Do not meet the audio guests until it asks you if you want to speak to an agent. Explain that you have completely replaced the OEM copy with a copy of the full license of the new windows and now want to use the OEM copy in a virtual machine on the same computer. Agent will then give you the activation string. Remember that the virtual machine is not transferable to any other computer.

  This information is offered by Darin Smith (MSFT) and the team of Windows licenses, November 18, 2011.

• I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  update by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/

  If this fails, attach a screenshot of the error message if it is in English.  otherwise, quote it.

• How to check the system configuration of the SX20 if the touch screen and the remote control does not work

  Hello friends, would like to know how can we access/check the system configuration of the SX20 if we not touch and remote control or they are not in working condition.

  I think that we can check this Switch interface, but unfortunately, I don't have access to the local switch right now.

  Hello

  option is to have access to the local switch and run "show cdp neighbors detail."

  or

  Connect the mobile to PC/computer LAN, run tftpd32 with affected DHCP pool. Then you can login to get the config.

  regds,

  Aman

• I don't want to upgrade to 7.0, I attend college online, and the update version does not work with my school. How can I stop Firefox upgrade? I have to keep uninstalling the upgrade and install the old.

  How can I stop Firefox automatically upgrade? My college online is not compatible with the upgraded version. I have to keep a new uninstall and reinstall the old.

  Tools > Options > advanced > update

  Uncheck the box automatically updates to Firefox.

• How can I get Service Packs, 2 or 3, for XP Pro, if automatic updates does not work?

  I have an Office I just bought 2nd hand for my son who is in grade school, but when I put the automatic updates to run that nothing comes however. Then I tried to install Norton Internet Security and I got an Error Message which said Norton was not able to complete the instalation like Service Pack 2 was not available, so I tried to locate a download of Service Packs 2 and 3 without success, can anyone help me please. As my son is a little off color on the PC does not.

  Say8tan.

  I agree with PA bear "you can't trust the security of ANY computer used until you've formatted the hard drive & then made a clean installation of Windows.  "

  But if you do not want or you cannot perform a clean install and are willing to take the risk of infecting other computers on the home network, read on:-

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• How can I get or create a windows vista recovery disc? My system restore does not work!

  Attempted to purchase the HP recovery Dics... Has said that Vista is obsolete!

  You can read the product key on the COA at the base / side of your system? If so go here "Microsoft Downloads wiki":

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/Microsoft-Windows-and-Microsoft-Office-standalone-downloads.aspx
  Follow the instructions to make a USB bootable stick for Vista, and then select 32-bit or 64-bit according to availability of the driver and the amount of RAM you have etc.
  You will need your key and you will need to activate by phone. I give full instructions doing so here 'a clean install of Windows Vista/7 wiki:
  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/1434.aspx  
  The clean install above applies to a Dell system; that you do not use a Dell when I say press F2 or F12 (step 6), you'll probably need to press another button. In step 4 you will need to go to go on the site of HP opposes the Dell one. Step 11 ignore any mention of specific software Dell mentioned however the recommended software mentioned is always useful.
  Note for Vista I only did a Dell via this method, and it worked fine. I couldn't try all other systems because the COA is faded and product keys were unrecognizable. For Windows 7, however I did 2 HPs through this method and many valleys.
  You can also look on eBay for reinstallation of Vista HP DVDs, but they can be hard to find.

• Whenever I have reset my password for my account and the new password does not work I can not connect?

  Any ideas? I have set up a new account as happened for a while, but I want to just get on the old account for a moment in order to change the address associated with my Xbox Live and anxious a few emails.

  Any help is appeciated.

  Hello

  Are you referring to Hotmail?

  I'm sorry, but we cannot help with hotmail problems in these forums in response to vista

  Please repost your question in hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

  Forums

  E-mail client and the appliance issues

  Hotmail Sign In questions

  Lost or deleted emails

  People and Contacts

  Reading, writing, and formatting mail

  Sending and receiving mail

  Sign in, and sign to the top and account security

  Using the Hotmail calendar

  Using Web Messenger

   

   

  Consult with Microsoft Certified Solutions

  How to work the views Active Hotmail?

  Your account has been temporarily blocked

  What to do if you can't connect to Windows Live Hotmail

  Compromised account - unauthorized account access

  Reset your Windows Live ID password

  Error when you try to send an e-mail: your message seems to have triggered our spam filters.

  Change your Windows Live ID password

• How is it possible that Firefox 3.6.28 with intelligent search functions and the latest version does not work?

  I noticed that when I'm on Firefox 3.6.28, try to look for something, not looking but sometimes opens directly the most appropriate result. It's amazing and really fast. Why this feature is not included in the latest version.
  Thank you

  When you type words in the address bar, Firefox will search using any motor is selected in the search bar. You can install a "Browse by name" or a "I m Feeling Lucky" search engine

  • "Browse by name | Mycroft Project
  • "Google (I'm lucky). Mycroft Project

  If you want the search engines separate in the address bar and the search bar, install the module keyword search.

  • https://addons.Mozilla.org/firefox/addon/keyword-search/

  The reasoning was that 'Browse by name' and "I m Feeling Lucky" are far from perfect. Rather than risking to send users to sites that are not what they were looking for, it was decided that always show the results of the research was a better option.

• My computer is stuck on the Welcome screen and the power button does not work. How can I activate it finish (and on)?

  My computer is a Windows XP laptop. It actually worked fine this morning, but now my power button does not work and the computer does not start correctly.

  Hello

  Its best to contact the manufacturer of the computer as it might be a hardware problem.

• the light on the power button does not work. How can I activate it?

  HP pavilion dv7

  Windows 7.

  the light on the power button does not work. How can I activate it?

  If the key light is not lighting up, then more than likely that the LED is just out for your power button. If the laptop is still under warranty, you can it be repaired or replaced, but as long as its not causing you any serious issues, I worry too much with it.
  
  BRAVO is just a system we use to say thank you to informative messages.

• Satellite C50D - B - 11 X - touch pad does not work

  Hi I have a C50D - B - 11 X Satellite, I've upgraded to windows 10 and now the touch pad does not work, the cursor is located in the middle of the screen, can anyone help.

  Check if the touchpad would work after uninstalling the driver for touchpad of programs and features that you can find in the control panel...

  I'm not sure that the touchpad driver developer but the Synaptics touchpad driver or MOMENTUM... you may need to check this...

  After removing the touchpad driver, please restart the system.

• I have a Toshiba satellite L455D laptop and the touch pad does not work

  If I plug my usb wireless mouse that works, but when I unplug it the touch pad does not work

  Have you checked to see if your laptop model has a physical button around the mouse pad that allows & turns off?  If it does not, many cell phones often have a software switch that can toggle the on & off power mouse pad.  It is usually triggered by a combination of function keys (key Fn + one of the F1 to F12 keys).

  Take a close look at the row of the top of your keyboard and see if you can find a key that has a small symbol that looks like a mouse pad.  If you find one, try pressing it in combination with your Fn key to see if your mouse pad features returns.

• Re Windows XP: At the opening of the hearts, the window is very small. How can I increase the window to fill the screen. Double click on the top panel does not work.

  Re Windows XP: At the opening of the hearts, the window is very small.   How can I increase the window to fill the screen.   Double click on the top panel does not work.

  Hi Rosa,.

  The size of the window for Hearts is actually design in Windows XP.

  However, there is a solution. You can follow these steps:

  
  Step 1

  a. first of all, copy the game.

  b. click Start, all programs, games.

  c. right-click on the game of hearts .

  d. Select Properties from the list.

  e. press the button find the target on the next window.

  f. right click on the highlighted file and select copy.

  g. then paste the copy on your desktop.

  h. right click on your desktop.

  i. Select Paste from the list.

  Step 2

  Finally, we will change the resolution for the game setting:

  a. right click on the game you just pasted on your desktop.

  b. Select Properties from the list and click the Compatibility tab.

  c. put the check box marked "run in 640 x 480 screen resolution.

  d. now whenever you want to play, click on that game on your desktop and it opens in mode full screen using the widest possible cards and numbers.

  Hope the helps of information.

• All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work.

  Original title:. Nothing works.

  All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work. I can't install a fixit program or run anything at all.

  Safe mode?

  Looks like you have a virus/trojan/worm infection pretty good...

  Actually, even if you get executables run again - you can be (read as "will be") better off the coast of a new facility.  Wipe and install media with your product key and other serial numbers and installation for other products media you own and restore your last recognized reliable backup for your files.