How can I add a USB host controller high-speed to my PC?

My OS is windows xp home edition. I get this message that the HI-SPEED device attached to Non HI-SPEED USB Hub.

The USB Composite device is a USB HI-SPEED device and will function at reduced speed when plugged into a port not HI-SPEED.

There is no host controller USB HI-SPEED installed on this computer.

Recommendation: You add a USB host controller high-speed on this computer in order to get maximum performance.

So, how can I add this USB host controller high-speed to my PC? Is - this material I must add and physically install to my PC?

As always, any help is greatly appreciated.

Thank you!

drake68

Hi Drake,

Review the devices USB connected to your PC and make sure that there is not a USB 1.x device connected to the same USB HUB (front or rear).  USB 1.x devices will cause the USB HUB at the bottom shift to 1.x speeds.

You have an old PC (2002), it is possible that your PC does not have a USB HUB 2.0.  In this case, you need to install a USB PCI adapter card.

Tags: HP Desktops

Similar Questions

  • upgrade to usb host controller high-speed

    I received a message that my device could run faster if I have upgraded to a usb host controller high-speed. Is this something that I can download or I have to buy a new usb controller? Thank you, Kevin

    If your system is old, it may have have USB 1.1 ports. Only way to fix it (if you use USB 2 devices. Either buy USB 2 PCI cards), or upgrade the system. If you get / have ports USB 2

  • Host controller high-speed USB 2 for Satellite 1110

    I have improved my Z15 Satellite 1110 XP home to XP Pro. I feel that I have 2 USB ports on my laptop. Problem that I face is that when I connect a USB 2 device, it can not find host controllers and operate at 1.1 speed.

    I read maybe it's a problem with the motherboard drivers, is there anything I can download to fix this problem?

    Hello

    If I remember your unit has three USB ports and they are definitely 1.1. There is no way to make them faster. One solution is to use the USB 2.0 PCMCIA card.

    It is not some kind of anomaly or problem and there is no way to fix it.

  • Usb host controller on the motherboard how?

    Usb host controller how on the motherboard, and I want the architecture of the controller on the motherboard usb host?

    Hello

    In practice, if you have only 4 Sockets USB, you can only connect 4 USB devices even if your motherboard could, in theory, face several.

    The manual of your motherboard can be downloaded here...

    http://www.gigabyte.com/products/product-page.aspx?pid=3490#manual

    .. What should give you all the technical information you need.

    Tricky

  • Standard Enhanced PCI to USB Host Controller: a driver (service) for this device has been disabled. Another driver can provide this functionality. (Code 32)

    How to solve: ' Enhanced Standard PCI to USB Host Controller: a driver (service) for this device has been disabled. "  Another driver can provide this functionality. (Code 32). »

    I hv tried to uninstall, shutdown, then reinstall and also put to day, but all to no avail.

    Just to ensure follow-up on the post of joel S can you check the following registry key, which relates to the USB:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

    Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

    If so, what is 'Data' for these names?

  • Standard USB host controller

    Hello

    Failure of the USB connection to connect to a printer. Try to fix it I removed the Standard USB Host Controller Port_ #0001.Hub_ #0009 and so the device is now marked as 'unknown device' with status = error #43.

    How can I solve this problem?

    Thanks, Eitan

    "OK, what exactly should I do if"programs and features "?

    Just look in the software for your printer brand list, select it and then click on uninstall on top.

    It won't appear in programs and features if you have installed the software.

    "If the printer driver was native to the operating system and installed automatically when you first of all connected printer, it should be removed in"Printers and faxes"or devices and printers."

    Also what operating system your PC there? Vista or W7?

  • Standard USB Host Controller 43 error code

    Original title: Code 43, w/PnP problems? Microsoft has disabled my backup storage device (he called unknown device) because these problems have been detected. Standard USB host controller. I need to access the files stored there.

    How can I access files stored on the device, if Microsoft does not detect?  My documents are lost?  What can I do else?  Thank you!

    Hey anewme,

    What is the number and model of your computer and the storage device?

    In addition to the above suggestion, try these too.

    1. check if the device works in another computer to see if you encounter the same problem. If you have the same problem, there could be a problem with the unit. If you believe that your device is defective, contact the manufacturer.

    2. before Windows can find and install a driver for your USB device, it must be able to correctly identify the device. Sometimes, you might have a USB device that Windows does not recognize and which came with a disc containing a driver. In this case, you can look for a driver on the device manufacturer's Web site. You can often download drivers from the support of these sites section. Reference: update drivers: recommended links

    3. download and install all the drivers for your motherboard. See how it goes.

    This should be it.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • FAILURE of STATE DRIVER / USB - IF xHCI USB HOST CONTROLLER

    My ASUS Zenbook UX32VD takes 10 or more minutes to start and just to display a blue screen with the text of "an error occurred...". DRIVER_POWER_STATE_FAILURE.
    The tha solutions technical support gave me did not work
    (Restart the factory system and lose all my programs... ¬ twice)

    After travel a lot, I found a video (youtube. com/watch? v = QYY2IHpI8Ow), the guy says, the problem is caused by the driver of a device

    But the driver that represents a yellow mark is of the WiUSB from Intel, USB - IF USB HOST CONTROLLER xHCI (I Don t know what - this, sorry for my ignorance, but I just know I do not have any device USB D :))
    I tried to update automatically, but just what the latest version shows...

    I don't know what to do, I've tried everything!

    (Sorry for my English)

    Hello

    Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
    According to needs). Win + D key calls the office and using Win Key active / disable the Office
    and the splash screen.

    Translate Windows 7 methods and use them on Windows 8.

    Resolution of the blue screen in Windows 8/8.1 errors
    http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

    Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
    Start Windows (applies to Windows 8).
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8).

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can analyze the minidumps if you make them available at the SkyDrive or other
    file
    -sharing sites (such as MediaFire). If you have problems downloading the minidumps
    Copy it to the desktop or Documents folder and download them from there. (This is
    Likely NOT of great help on new construction).

    ZIP or download the content of the C:\Windows\minidump (only once you have made
    suggestions initials at the top of this answer and IF the BSOD problems).

    Use SkyDrive to upload collected files
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7 and 8)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ==========================================================

    This "might" be a power problem, even if it's not the most common cause.

    9F is probably a driver issue. Antivirus/antispyware/security programs can also cause these problems.
    Have you added the recent devices or the updated drivers - do not forget to check in Windows updates of
    see if a driver has been updated before that happens. This can also be caused by a loose card
    or cable and even a weak power supply.

    This error means that a driver does not properly support the power state. Check in Control Panel-
    Device to be sure management of great drivers are stopped not for sleep - double-click on display
    Adapter - card NETWORK and WIFI - healthy and others - tab power management - uncheck allow
    computer to power off. Maybe the only has a problem.

    (Use EXECUTION instead of start - search such as used on Vista or Windows 7)

    WINDOWS key + X - RUN - type MSCONFIG.exe

    General tab - tick this box start Diagnostic - APPLY / OK - REBOOT

    Try it now. If the computer still blue screens thinks that video driver. Otherwise think the card NETWORK, Wifi, sound, or...
    (and it might still be video interacts with something else). See link to the troubleshooting tool
    above my generic driver update methods.

    Bug Check 0x9F: DRIVER_POWER_STATE_FAILURE<-- read="" this="">
    http://msdn.Microsoft.com/en-us/library/ff559329 (v = vs. 85) .aspx

    BCCode: 9F 0x0000009F<-- read="" this="">
    * 1167.html? order = date http://www.faultwire.com/solutions-fatal_error/Driver-Power-State-Failure-0x0000009F-

    ------------------------------------------------------------

    Driver Verifier can help find some BSOD problems:

    Using Driver Verifier to identify issues with Windows drivers for users advanced
    http://support.Microsoft.com/kb/244617

    How to solve the problems of driver in Windows Vista or 7 (and Windows 8).
    http://www.WinVistaClub.com/T79.html

    Using Driver Verifier
    http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

    How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

    Driver Verifier
    http://www.techsupportforum.com/2110308-POST3.html

    Using Driver Verifier
    http://www.faultwire.com/solutions/using_driver_verifier.php

    How to use Windows drivers check Manager to solve problems and identify the Driver questions
    http://www.YouTube.com/watch?v=_VwIDD9xngM

    You can disable the driver verifier
    http://support.Microsoft.com/kb/244617

    WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

    BlueScreenView lets you know if there is a driver specified in the error message. Also check with
    MyEventViewer at the blue screen.

    If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

    --------------------------------------------------------------------------------------------------------------------

    It's my generic how updates of appropriate driver: (update of your key drivers and BIOS)

    This utility, it is easy see which versions are loaded: (VIEW of the value for hide Microsoft drivers
    (-update those without drain in their names.)

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now click on
    Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
    Click on - uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Microsoft - hardware and drivers
    http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

    Why Windows is not find my device?
    http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

    What happens if a device is not installed correctly
    http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • DRIVER_POWER_STATE_FAILURE & USB - IF xHCI USB host controller problems

    Greetings,

    Recently I've known APC with pilot failure current state every time I try to turn it on or reactivate my new Zenbook from ASUS. It takes forever so she actually turn on which is also a new problem. I tried to run a Windows troubleshooting from the center of the action and he said that there is a problem with the USB - IF xHC USB HOst Controller driver. He recommends that I re - install this driver, but does not give me the opportunity to do so. I am downloading a link to my Minidump with the hope that someone could help me.
    Minidump SkyDrive link: https://skydrive.live.com/redir?resid=2FA3EA1D7C87B0CD! 300 & authkey =! AMQqBm28WoEP7Jk
    Thank you in advance.

    Just to add to the excsd.sys advice of zig - zag seem to be also involved in the accident:

    1: kd >! devstack fffffa80046e97f0
    ! DevObj! DrvObj! DevExt ObjectName
    fffffa80051738a0 \Driver\partmgr fffffa80051739f0 InfoMask field not found for _OBJECT_HEADER to fffffa8005173870

    fffffa8005172880 cannot load image \SystemRoot\system32\DRIVERS\excsd.sys, 0n2 error Win32
    WARNING: Unable to verify timestamp for excsd.sys
    ERROR: Module load completed but symbols can be loaded for excsd.sys
    \Driver\excsd fffffa80051729d0 InfoMask field not found for _OBJECT_HEADER to fffffa8005172850

    fffffa80051dd060 \Driver\disk fffffa80051dd1b0 cannot read the offbeat info from nt! ObpInfoMaskToOffset fffffa80046e75d0 \Driver\ACPI fffffa8003bfb590
    > fffffa80046e97f0 \Driver\iaStorA fffffa80046e9940 cannot read the offbeat info from nt! ObpInfoMaskToOffset

    The excsd.sys is a component of ExpressCache.

    The same laptop with a similar error has been reported in the following thread:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-performance/driverpowerstatefailure-Windows-8-Pro/572259fe-7525-4056-ABAA-1868286e3018

    As in this thread study ExpressCache uninstall, update the driver of the TSRI and then, if you wish, reinstall the latest version of ExpressCache.

    ExpressCache is not a required software, you do not have to reinstall if uninstall you.

  • Satellite Pro 6100 - USB host controller

    USB host controller

    Hello

    And what do you know about USB host controller? Do you need drivers or you have problems with the USB ports?

    Please explain your problem detailed in a few English phrases that others here can help you.

  • How can I add my wife's mobile phone number to send it

    IPad to my wife (serial number DM * 191, iOS version 9.2.1 if one of the people of importance) do not include his cell phone number on send it & receive list. How can I add to this list?

    < personal information under the direction of the host >

    According to me, there was 33 views and no response, then maybe that's not a question for the people of Apple. Should I ask Verizon about this problem?

  • How can I add a HD to my time capsule

    My old man (8 years) 2 t Time Capsule is running out of backup space for 3 machines that use it in our House.  How can I add 2T HD expansion make it last a few more years?

    It is easy to add a USB drive to the USB port at the back of the time Capsule to increase storage capacity, but this will have nothing to do with the internal player on the Time Capsule.  In other words, you have two drives separated ... one on the Capsule and the other on the USB attached to the time Capsule.

    If you begin to move the USB disk attached to the time Capsule backups, then Time Machine will do a new full backup of every Mac and then continue with incremental backups.

    Make sure that the USB to the Time Capsule that is formatted to work with Mac.  This would mean that it must be formatted in Mac OS extended (journaled).

  • How can I get my xbox 360 controller to work with my computer... Im running the 64-bit version of Vista... my computer does not even recognize the hardware?

    How can I get my xbox 360 controller to work with my computer?... I can't even recognize the hardware? Im running Vista 64 bit on a quad core rig any help would be appreciated... Thank you

    Hello Ghostdogaln.

    How do hang you the controller?  You must either use a * wired * controller, or use a wireless controller with receiver game Xbox 360 for Windows.

    If you use a wireless with a Play and Charge kit controller, it will not work as long as the USB cord only actually plug into the battery for the controller itself. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

  • How can I add a printer to my wireless network

    How can I add a printer to my wireless network

    John

    I assume that you have a wireless printer. If so, the software is different from each manufacturer, but it is similar to this. Before starting the installation, make sure that you have a USB cable at your fingertips and you know your network name (SSID) and wireless key. Install the software and follow the prompts to set up the connection Wireless for the first time. Once it has been set up you can unplug the USB cable.

    The USB cable is not required on subsequent computers, simply install the software and follow the prompts on the screen of an additional computer (or similar wording). You may need to enter an SSID and Wi - Fi key, after which the printer must be accounted for.

  • How can I get my USB printer doesn't work?

    I am trying to install a Dell 3000cn laser printer in my computer. He started by putting a virtual printer in my control panel that would not print it had nothing on the Hardware tab, under its properties and real hardware was still on the list of unknown devices in the bottom.  I removed both and removed the driver and tried to install the printer before I plugged it in which does the same thing as before so I went into the Device Manager and there was no printer listed. I've uninstalled the usb printer support and removed everything that are associated and tried. Now I get support of usb error has a printer driver problem.

    I tried to support the customer of Dell they got hung up, I tried Windows customer, they want me to pay.
    I've exhausted the research online and can't find 5 people with the same question online all back in 2008 to 2010 which was never resolved.

    How can I get the USB printer to work?

    Generally, printers do not appear in Device Manager.  You will see, however, registrations for "IEEE 1284.4 devices ' or ' IEEE 1284.4 compatible printer" in particular for HP printers.  It is possible that your Dell printer is really a re-badged HP.

    What exactly did you delete when you have uninstalled the "usb printer support '?

    Please provide the full error message text that you do when this error.

    Why do you think you had a 'virtual' printer is installed?

    Click Start, click devices and printers.  What are the items in the category 'printers and faxes '?

    Did you download the driver appropriate for your version of Windows (including 32-bit or 64 - bit) from here--> http://www.dell.com/support/home/us/en/04/product-support/product/dell-3000cn/drivers?

    Did you follow these installation instructions:

    Download

    1. click on the link download now to download the file.
    2. when the file download window appears, click Save to save the file to your hard drive.

    Extract the files
    1. navigate to the location where you downloaded the file, and then double-click the file to decompress the download package
    2. click on continue.
    3 specify the location where to unzip the files.
    4. click on the OK button to extract the files.
    Once the file extracts the message all files have been unzipped will appear.
    5. click on the OK button to exit the installation program.
    6. go to the Start button.
    7. go to settings, click Printers.
    8. Select Add a printer.
    9. follow the instructions to set up your printer.
    10. Select Have disk and point to the location where the drivers were extracted.

    Install the printer driver:

    1. install the printer driver using Add Printer method.
    2 follow the instructions that appear in the Add Printer Wizard dialog box to install the printer driver on your computer.

Maybe you are looking for

  • MacBook Pro (15 inch, end 2013) with MacOS Sierra 10.12: kernel_task maxing out CPU with external display

    I have a maxed out end 2013 the MacBook Pro Core i7 to 2.6 GHz, 16 GB of DDR3 RAM, 1 TB SSD, NVIDIA GeForce GT 750 M 2048 MB, Intel Iris Pro 1536 MB. Also, I have a DELL P2415Q Display 24 inches (3840 x 2160) using Thunderbolt, are involved through t

  • Webcam HP Probook b 6450

    Hello I have a HP Probook 6450 b and it incorporates a webcam but when I tried to use it, he said that it was not on and I need to turn it on. How do you turn it on? Please help me. Kind regards Asim Ijaz

  • Compaq EVO D510 SFF: Compaq EVO D510 SFF CPU Upgrade

    I'd like to update this pc cp and would like to know if it is compatible Intel Pentium 4 3.06GHz 512 KB 533 MHz SL6PG/SL6NN Socket 478 CPU processor

  • Y580 startup failures

    I own my Y580 for 2 weeks now and everything is fine. Since yesterday, the startup fails with a blank screen and the light of the lit keyboard. Disable the Y580 with button / stop and try 5 - 10 times to boot, Windows 7 starts up and runs very well.

  • Radio e280v2 FM

    My FM Radio just stopped working the other day.  I tried the soft reset and reformat, but still no radio.  The display works fine, just no sound.  Any ideas? Thank you Tim