How can I change the owner of a computer or a cell phone
need help
How can I change the owner of a computer or a cell phone
Hi Wayne,
In order to change your username registered on the computer, you need to change information in your registry.
a. Click Start, type regedit in the search box and press ENTER.
b. navigate to the
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
Note: The current Version will be two editable sections called RegisteredOrganization and RegisteredOwner in the right side.
c. double-click on RegisteredOwner and enter your information in the "Value data" section, and click OK.
d. exit the registry editor and restart the computer.
Your new values will be present when you open the properties of the computer.
Important: The above article contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information about how to back up and restore the registry, follow the steps from the link below:
Hope this information is useful.
Tags: Windows
Similar Questions
-
How can I change the OWNER of a table?
How can I change the OWNER of a table entr2009mm?
Or the OWNER of all TABLES including tablename match the pattern * 2009 *?
PeterHello
There are different posiibilities, Import/Export can do.
But, if it is not a too large Table, you can use ETG (from a user with DBA privileges for example).
Create Table
. as select * from . ;. Then, you must re-create the dependent objects (Index,...) and remove the Table Source.
If you have a set of Tables, it is preferable to use Export/Import.
Hope this helps.
Best regards
Jean ValentinePublished by: Lubiez John Valentine, February 9, 2010 20:20
-
How can I change the owner of the activity?
Hello
How can I change the owner for an activity through a web service?
I can put owner = {name of desired owner string} and use the update?
Can I give an empty value for the owner?
Links to other discussions on this topic will also be welcome.
Thank you.
Published by: Yossi Lempert at 02:09 28/12/2009Hi Yossi,
Changing the owner to an empty value did not work properly for some reason any.
This error message do you receive? I would not recommend this approach even if it happened to save the update, as you noted, it is safer to perform explicit reassignment as below to make sure the correct visibility on the issue.
Change of ownership of a specific owner id has worked, including the administrator and the web service ID, and it seems like a safer way to do it.
1 CXFPE
1 D1COH
Thank you
Sean -
How can I change the time on my computer from 24 hour to 12 hour clock clock?
How can I change the time on my computer from 24 hour to 12 hour clock clock?
How can I change the time on my computer from 24 hour to 12 hour clock clock?
Here is the method for Windows 7. If you are using Vista, there may be a slight difference, but basic procedures should be similar...
Start > Control Panel > region and language > Format > more settings > time tab >
under time format, set hh: mm hh: mm
H = 24 hours
h = 12 hours
Click OK when finished.
-
How can I chang the name of my computer?
original title: help ^^
1. How do I chang the name of my computer?
2 - when I put my helmet and I opened the video and then I took her out of the laptop sound not why?
Here's how to change the name of your computer: http://www.howtogeek.com/howto/windows-vista/change-your-computer-name-in-windows-vista/
-
How can I change the owner of a Mac while keeping the software?
Hello
I saw online sales of used sellers Mac with the included software. A part of the software includes Adobe CS6 Master Collection, Final Cut Pro X, Microsoft Office, etc.
If I buy the laptop, how I would change the possession of the laptop to me while keeping the software on the computer?
If I have to use my Apple ID, wouldn't that let me use Final Cut Pro as it is allowed to the former owner ID and not mine?
In addition, is there advice on how to move from Final Cut Pro X (and other software) to another Mac if I happen to get another?
Thank you
Matthew
Unless sellers are explicitly including transfers of software license, you cannot continue to use the software without eventually getting into trouble. Adobe CS apps can be installed on multiple machines, but they cannot be activated on two. If the 'included' software has already been activated by the previous owner, you won't be able to use it.
The inclusion of the high-end systems used on applications should be a red flag: avoid sellers.
-
How can I change the owner of a history of Adobe project?
Hello
I'm changing the "owner" of an Adobe Story project. I signed up for an Adobe Story Plus account through my business e-mail, and I want to transfer personal property of my scripts of my email to the business Edition. How can I do this?
At the moment I just "shared" with my new email, but this means only I'm a co-author and do not have total control over my documents. Any help is appreciated, thanks!
Sorry, but the story doesn't have a function to change the owner of a shared project.
In this case, you will need to manually export and import of each document from one account to another.
-
How can I change the owner of my newsgroup
I need to change the owner of our discussion group (or add more admin group) for other users can remove users from the group. Currently the only person who can remove users from the group is the person who created the group. Any help much appreciated.
Do try saw the cat Creator who has permissions "/ setrole [Skype Name] MASTER" for someone they would like to add as a mod
-
I bought a used computer, how can I change the owner registered in my name as the owner?
I bought a used computer, it works well a bit slow
My question is, how do I change owner registered in my name as the owner?
It has windows xp, version 2002
Charlotte Pierce
E-mail address is removed from the privacy *.
* original title - nine computer opportunity *.
I would recommend a complete reinstallation, which put you as the owner and you give a fresh windows to use.
It may be slow because of everything that was on the computer when you guessed it.
http://aumha.NET/viewtopic.php?f=62&t=44636
I used these instructions PA supporter when I reinstalled my OS.
I hope this helps.
-
How can I change the owner when you give a laptop to a family member?
I give my laptop running Windows 8 to a member of the family, so need to change the property to them.
any help would be greatly appreciated.
The best way to do this in Windows 8 is to do a "Reset PC" which restores the computer to the new brand terms, just as it came from the factory. After that, it will be display "enter the name of the owner" basically ready for the 'first use' by the new owner.
See this link for more on this topic and how to do - it is only 3 clicks :)
Microsoft Windows: how to restore, Refreshor reset your PC
Windows.Microsoft.com/en-US /windows-8/restore-Update-reset-pc -
OK, I'm the administrator on this computer, but when I want it, clean, System Restore, defrag download something on it, he said I don't have the right permission, also it will not hook up to our internet ipad but it works anywhere else... How to change these settings during his don't not let me, and also I can not update my computer it says there is an error
Hello
You did changes to the computer before the show?
Method 1
The issue could be due to the settings of the user account on the computer. I suggest you to disable user account settings and check if the problem persists.Enable or disable the User Account Control
http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-offNote: User Account Control (UAC) can help prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.
Method 2
I suggest that you enable built in check and account administrator if the problem persists.
To activate the built-in Administrator account, follow these steps:
a. click Startand type cmd in the Search boxof start.
b. in the list of search results, right click Guest and then click run as administrator.
c. When you are prompted by user account control, click continue.
d. at the command prompt, type net user administrator / Active: Yesand then press ENTER.
e. type net user administrator, , and then press ENTER.
Note: Please replace the tagwith passwords which you want to set for the administrator account.
f. type exitand press ENTER.
f. disconnect from the current user account.Method 3
I suggest you to create the new user account to check whether the user account is the origin of the problem.Create a user account
http://Windows.Microsoft.com/en-in/Windows7/create-a-user-accountIf everything works well in the new user account, then I suggest you to transfer data and settings to the fixed aid corrupt profile.
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-in/Windows7/fix-a-corrupted-user-profile -
When I cut on my computer it starts a program called frost wire and it freezes I want to remove where it starts automaticlly and just start up when I open
Hello
FrostWire is a BitTorrent software or any bit torrent software can be dangerous to use that you can end up with a Malware infected computer.
FrostWire forums:
http://Forum.FrostWire.com/viewtopic.php?f=1&t=12469
FrostWire FAQ;
As your computer freezes because of this, I would like to download Malwarebytes anti-malware update and scan of Malware:
http://www.Malwarebytes.org/products/malwarebytes_free
You can manage through Windows Defender startup programs.
But if you use McAfee, Norton, AVG and MSE, etc as an Anti Virus they disable Defender, which is the best thing for them to do.
There are a couple of other ways to manage startup programs:
How to use MSCONFIG in Windows Vista
Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup. Disabling these programs will help your computer boot faster and crash less.
http://netsquirrel.com/Msconfig/msconfig_vista.html
Alternatively, you can use this free Autoruns program:
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.
Autoruns' hide signed Microsoft entries allows you to zoom in on images of automatic start of third parties who have been added to your system and it has support for looking at images of Autostart configured for other accounts configured on a system. A command-line equivalent that can display in format CSV, Autorunsc is also included in the download package.
You may be surprised how many executables are launched automatically!
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
And some programs under Tools > Options give you the choice to know if they start when Windows starts, or not.
See you soon.
-
How can I change the name of my computer that I assigned to Setup?
I just did a system recovery and have an external hard drive to backup and realized I should have renamed the computer reconfigured slightly differently so I have separated on the external hard drive backups.
As it sounds, as there is no involvement of the field...
Use the computer name tab in the System Properties dialog box. To find this tab, use one of the following methods:
- Click Start, right-click my computer, and then click Properties.
- Click Start, click run, type sysdm.cpl, and then click OK.
- Click Start, click Control Panel, double-click performance and Maintenanceand then click System.
Change the name of the computer
To change a computer name, follow these steps (in light of the foregoing...):
- Click the computer name tab, and then click change.
- Type the new computer name in the computer name dialog box.
- Click OK three times, and then restart the computer.
-
I have to start from scratch and rebuild my albums and put my photos on USB to transfer on laptop?
http://lightroomers.com/migrating-you-Lightroom-Catalog-and-photos-to-a-new-computer/1155/
-
How can we change the LR 6 computers is tagged on?
My friend has LR 6 single license installed on 2 computers. It is only allowed on 2 computers but getting ready to fail, and she wants to install LR on another computer. How can we change the record to another computer?
Thank you
See the instructions on this thread.
How to turn off a computer from Lightroom 6?
Also look at this web page.
http://www.lightroomqueen.com/how-move-Lightroom-to-new-computer/
Maybe you are looking for
-
Cannot disable dragging in the last update of iTunes
Since the update to the latest version of iTunes on my MacBook Pro, my music mix of the entire library, so I can't listen to an album from start to finish. None of the buttons shuffle seem to turn it off or seem to be chosen. I found a suggestion to
-
I use my mac in Britain, as I've always done, and all of a sudden without me changing anything voluntarily, all the Google bar results sre in greek?
-
Need to purchase Satellite X 200
Guy; I intend to get nine X 200, however through the forums found many problems in terms of driver XP. The machine is really nice and I'm really feeling for these stupid incompatibility problem concern. Otherwise I'll change Toshiba and another :)))
-
Start stopped Equium A110-276 - seems less RAM slot is defective
Hey there. I am trying to sort my latop comrades. He just stopped start one day, when the power button was pushed the power light light up, the DVD - RW would scan for a disc and the brief of HDD LED illuminated. The screen never showed any output, r
-
Communication speed Internet &; Android version
I'm in Egypt and my os Atrix is Gingerbread for my region, one of my colleagues has an Atrix with the same operating system, but from Bell Canada. I realized the same situations (network, time and place) its mobile is faster to download. Also, I real