How can I check if Windows is running in safe mode on my pc.
Original title: Mr. Thompson
How can I check if Windows is running in safe mode on my pc. I'm trying to uninstall windows defender but I can't run the windows installer, I am still running windows xp. Thank you.
Hello
On the four corners of the screen that indicates that you are in safe mode, safe mode will be written.
For more information on installation of windows defender, chk issues this link
http://www.ehow.com/how_6293303_uninstall-Windows-Defender-XP.html
Tags: Windows
Similar Questions
-
How can I check my window of downloads as a tab in the main window
How can I check my window of downloads as a tab in the main window
This has happened
Each time Firefox opened
-
How can I check that Windows is authentic when buying a new laptop or used?
original title: How can I check if the windows are authentic, while buying a new laptopHow can I check if the windows are authentic, while buying a new laptop
Of course make sure you buy laptop from a trusted source, such as places that are trustworthy.
If the price is very cheap, be careful.
Also check label WGA, you can find some information from:
-
How can I check for other versions running of Foxfire
received pop-up which until now has no one to check other versions running of foxfire, how can I do this?
If this message said Foxfire, there could be malicious.
-
Vista update last night, now I can not even do Windows or restore from safe mode.
I have a Vista 64 bit machine.
Last night my computer needed to install updates before shutting down, so I left it (as usual). This morning, when I turn my computer on it is stuck in a cycle of perpetual start-up. It restarts, concludes windows, gets a blue screen of death, reboots, etc etc. I disabled automatic reboot, so I could find the error message. It is a stop error message: 0x0000007E. I tried the analysis, through the prompt, the EFA one. It found errors but it unable to fix/replace.I can run my machine in safe mode. But I am unable to run a system restore. Using the option on the start menu, it gives an error message. If I use the suggested path since I was able to get the system restore to start via the command prompt. I tried several dates for a restoration of the system (the only thing that has happened to my machine in weeks is the installation of the update of mystery last night and windows update). The system restore is unable to complete. It comes up with the following error message: 0 x 80070057.I ran AVG and Malwarebytes. According to the two, which are updated, I do not suffer from any virus, spyware or anything. Now the only option that works in safe mode. Everything that involves repairs or last config of success (from the option menu F8 when reboot) just does enter the loop.Whenever I do windows an option, ask questions about the parameters name, workgroup and starting up my computer. I don't know if this affects what it is.Thanks to all those who might have a tip or two to throw my way. I'm about to pull out my hair.Hello
If you have connected an external equipment to the computer, and then try to disconnect all external devices and then tries to start and check if it helps.
It will be useful.
-
where can I find the dialog box run in safe mode with networking
I can't run in normal mode, safe mode with networking is the best I can do. When I start in reg mode I get Rainbow lines? How can I fix it?
Hello
'Rainbow' on your screen lines is a sign of a corrupted graphics driver or graphics hardware fault
If gettting the latest graphics drivers from the manufacturer does not resolve the problem contact the manufacturer of the computer, if under warranty
If it is under warranty, contact a local reputable computer repair store
-
How can I check my windows 7 is valid
I have ben using this software for many years and up to date, some anaucement shows that my windows 7 is not legal. help-
To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
(download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
Once saved, run the tool.
Click on the button continue, which will produce the report.
To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
-* in your own thread *, pleasePlease also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
http://www.Microsoft.com/en-us/howtotell/hardware.aspx -
How can I check my windows is genuine?
6.3.9600.16384
SL_LICENSING_STATUS_LICENSED
0x00000000
SL_GEN_STATE_IS_GENUINE
1
0x00000000
0
0
VT8K9
00262 30245-36325-AAOEM
6.3.9600.2.00010300.0.0.100
Windows 8.1 single language
x 64
CoreSingleLanguage
9600.winblue_gdr.140305 - 1710
India Time (GMT + 05:30) Standard
e2ca509a-a2f4-498B-BA09-297685d369ac
Operating system Windows (r), channel OEM_DM
55c92734-d682-4D71-983e-d6ec3f16059f
530be0d0-8398-d066-4160-72fb0e86601b
06401-02623-024-536325-02-1033-9600.0000-1882014
OEM:DM
291453545145825822283590625571061959208374630008057024760845440
fake
S-1-5-21-4127572714-2345129018-40292555
1033
16393
1033
SIGNED_INFO_PRS_SIGNED
true
Hewlett-Packard
HP Pavilion 15 laptop
20140730112541.000000 + 330
PASS
GenuineId = 55 c 92734 d682 - 4 71-983e-d6ec3f16059f d; OemId = 0000064397; OptionalInfoId = rm7K9LG92Dco11s70OuczmnD7Ig, gZht4Iau5VA2XX, amRw4a, 49Q93g + yudc0g0; PID = w9Z/c08adbWzQSpYjXr3ZkGqFPc82mjPzghAexNOuU plus; SkuId = e2ca509a-a2f4-498b-ba09-297685d369ac; TimeStampServer = 2014-07-30 T 05: 57:36Z;
Please I HAV buyed mah new HP laptop of HP please please anwer reseller fast
Hi Ravi,
I'll try to help you with your concern. If you want to know if your Windows is genuine or not then you can have a look at the following article that deals on get answers to common questions about Windows genuine.
Also, as you mentioned that the laptop is bought at HP I don't think you need to worry about this. Let us know if you have any questions.
Thank you.
-
How can I get PSE11 to always run in Expert mode?
I have PSE11 defined as default program to open .jpegs, for example... so, if I double-click a picture icon it will launch PSE11, but it is still in mode 'Quick' initially... is possible to configure it so that it starts in Expert mode every time? Thank you...
You may need to do something in Expert Mode for example open a picture and he re - save and close.
-
Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities free ware. Also, windows Explorer does not display dimension and other video related information for the file. Y at - it a tool that can indicate what exactly is the problem with the file.
Ritu
Hello
1. you get any error message?
2. don't you make changes to the computer before the show?
Please follow the steps from the link below.
-
How can I print my Microsoft Surface running Windows 8 RT?
How can I print my Microsoft Surface running Windows 8 RT?
Most new wireless printers have an impression of the Microsoft Surface with Windows 8 RT problem. Everything you need to make these printers is tell them to print and they will. Older wireless, Ethernet and USB printers should not have driver officially supported in Windows 8 RT, but there is a way to get the printer working. There are different requirements depending on how the printer is connected to the Surface.
Note: All the steps below are only for other HP ink Jet, DeskJet, PhotoSmart and OfficeJet printers. These steps are not for Laserjet printers or printers from other manufacturers. These steps may not work for all inkjet printers. If these steps do not work, try different drivers in the list until you find the one that works (you'll understand what I mean once you follow the steps below). If none of the drivers work, your printer does not work with the Surface.
For (Ethernet or wireless) network printers, all you need is Surface keyboard or a USB keyboard to connect to the Surface. It is simply what you have to type more easy to type. You will also need to have the Surface and the printer connected to the same network.
- From the right edge, drag your finger to the left on the screen Surface to appear charms bar.
- Press search.
- Under the search box, tap Settings.
- In the search box, type devices and printers.
- Press devices and printers.
- Contact add a printer.
- Tap "my printer is not listed.
- Select the TCP/IP option and then press Next.
- Enter the IP address of the printer and press Next. Note: You can get this from the network printer, or list DHCP in your router Configuration Page.
- The Surface will locate the printer and try to install it. Installation fails, and the Surface will be asked what you want to do, look on the internet for the driver, or manually install the driver. Choose to install the driver yourself.
- Press 'I want to choose from a list of drivers.
- If no driver is in the list, make sure that the box next to 'Show compatible drivers' is not checked.
- Choose HP in the production list.
- Choose driver DeskJet PCL 3 class in the list of drivers. If this driver does not work, try using the Photosmart PCL3 driver, or the driver Officejet PCL 3. (Thanks JonW for letting me know about these other alternates.) )
- Press Next.
- Tap Finish.
- Test print.
For USB connected printers, need you a USB cable to connect the printer to the computer.
- Connect the printer to the computer via USB.
- Windows will try to find the drivers but will not be able to.
- Here Windows may ask you if you want to choose the driver to install. If she go to step 14 below.
- From the right edge, drag your finger to the left on the screen Surface to appear charms bar.
- Press search.
- Under the search box, tap Settings.
- In the search box, type Device Manager.
- Press Device Manager.
- Tap view and select Show Hidden.
- Search for the printer in Device Manager. It should be in the other devices section with a yellow warning next to her sign.
- Select the printer in the list.
- Press Action.
- Update driver to touch or to install any what it displays.
- The Surface will ask you what you want to do, look on the internet for the driver, or manually install the driver. Choose to install the driver yourself.
- Press 'I want to choose from a list of drivers.
- If no driver is in the list, make sure that the box next to 'Show compatible drivers' is not checked.
- Choose HP in the production list.
- Choose driver DeskJet PCL 3 class in the list of drivers. If this driver does not work, try using the Photosmart PCL3 driver, or the driver Officejet PCL 3. (Thanks JonW for letting me know about these other alternates.) )
- Press Next.
- Tap Finish.
- Test print.
I hope this helps.
-
How can I check to see if I have the latest version of Windows XP?
How can I check to see if I have the latest version of Windows XP? If I don't have the latest version of XP, how can I install it?
There is not "later" version of XP - XP there and there is that Service Packs added to it.
To know what Service Pack level you are to start - run and type in "winver" (without the quotes)
If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
My Windows Blog -
How can I check ink using Windows 8.1 levels
How can I check the ink levels using Windows 8.1. for my Deskjet F2100 to all-in-one series printer.
I got a new computer with Windows 8.1. already installed and well that my
printer works normally, I have no ink or HP support or a level indicator
other tools, HP etc. I checked the HP website offering me to go to START >
CONTROL PANEL > PRINTER & DEVICES. Right click on the printer preference.
Services and choose the LEVEL of INK. But there is no photo ink level click on.
Consider that HP did not compatible for this printer software and Windows 8.1?
Help, please.
Hi Elsie, welcome to the forums
I will examine with pleasure for you to see if your model of printer available with Windows 8.1 full software. First of all, please let me know what model Deskjet F2100 you have and I'll do some research!
In the meantime, you can run the HP printer install wizard for Windows to see if the tool installs the complete driver. If it is available, you will have the available printer software on your desktop that you can open to view ink levels.
- Range of all-in-one printers, HP Deskjet F2110
- Range of all-in-one printers, HP Deskjet F2120
- Range of all-in-one printers, HP Deskjet F2140
- Range of all-in-one printers, HP Deskjet F2180
- Range of all-in-one printers, HP Deskjet F2187
Happy Monday
-
How can I check the levels of ink on deskjet 2050 on Windows 8?
How can I check the levels of ink on deskjet 2050 on Windows 8?
Hello
If you do not have the full features software download and follow HP printer Installation Wizard to obtain and install the latest version of the software automatically:
Once you have the complete software use the Hp software to locate the estimated ink levels, you can access it from Windows 8 start screen by clicking on the icon HP Deskjet 2050:
-
How can I check that my windows licenseed or not
I have several computers in my office with different types of windows (win xp, win vista, win7). How can I check that versions of windows installed on each computer is authentic (licensed) or not
The Genuine Microsoft website provides information about the Genuine Advantage program:
http://www.Microsoft.com/Australia/genuine/how-to-tell.mspx
Maybe you are looking for
-
ZBook 17 G3: G3 Thundberbolt 3 dock of Zbook 17 questions
Has anyone gotten the 200W 3 Thunderbolt Zbook dock and all managed to make it work? I recently took delivery (a few months late) and cannot operate. When I plug it (and I made sure each driver I have is also present on the HP site), I start runnin
-
How can I download service pack 1A
original title: How can I download service pack 1a for my computer to install on the laptop got for her grandchildren bought 2 varbook computers cell phones of our elementary for her grandchildren when they are home, I installed XP but I am unable to
-
Computer hp pavilion ze4900 laptop use with the Windows XP operating system and a range of printers hp psc 2110, both were Setup at the same time. Recently, whenever I turn on the computer, these windows are: firstly, they say '2100 Tour', then a '21
-
Driver Canon BJ-30 in Vista, but not Windows 7?
I have a Canon BJ-30 I use when awaay from home. I previously used it with Vitsa and the built-in driver, but there is not driver built into Windows 7. This printer from Canon since XP did not support. Is it possible to transfer my PC Vista drivers?
-
Graphics.ROP throws IllegalArgumentException
I'm an IllegalArgumentException (with null backtrace and message) when I do the following in the paint for a custom field method: g.ROP (Graphics.ROP_SRCMONOEXPAND_COPY, x, y, FONT_CHAR_WIDTH, FONT_CHAR_HEIGHT, font_, left, top); However, the followi