How can I configure a port Ethernet NI9792 gateway to communicate with a cRIO CAP?

Salvation OR engineers,

I intend to use my gateway NI9792 in the following way:

1. a single Ethernet port for network connection. That's how I'm developing, download the software and monitor my request through my PC in my office.

2. the other port to communicate with a cRIO device? If so, how can I do it?

It seems to be a stupid question, but I really couldn't work this!

Thanks in advance,

Luiz

Good afternoon, Luiz

Follow the first link to guide the module which can be used and other links to the best part of bore configuration CRIO. For any question, please contact us.

How to set my time on the NI WSN-9791 or NI 9792 gateway server?

http://digital.NI.com/public.nsf/allkb/44FA322FAFF8D58D862575BD00591A54?OpenDocument

Configuration and NI WSN product guide
http://zone.NI.com/DevZone/CDA/tut/p/ID/8710

Configure the Ports of double Ethernet on real-time controllers

http://digital.NI.com/public.nsf/allkb/67F94BB93BCE32CF86257367006B3659?OpenDocument

video installation and installation CRIO

http://www.NI.com/SWF/demos/us/cRIO/outofbox/

Automatic configuration of network for the cRIO-9073 and cRIO-9074 CompactRIO controllers

http://digital.NI.com/public.nsf/allkb/37C790309A210A748625757000570938?OpenDocument

Sincerely,

Mauro Vera.

Tags: NI Products

Similar Questions

  • How can I configure an 802. 1 x in a with IOS 15.0.2 2960 switch?

    Hello

    I'm trying to config a switch WS-C2960-24PC-L IOS 15.0 (2) SE5 and C2960-LANBASEK9-M to use 802. 1 x in my network, but when I type the following commands the IOS does not recognize the interface commands and I can't fill in the parameters:

     Router# configure terminal Router(config)# dot1x system-auth-control Router(config)# aaa new-model Router(config)# aaa authentication dot1x default group radius Router(config)# interface fastethernet2/1 Router(config-if)# switchport mode access Switch(config-if)# authentication port-control auto (or dot1x port-control auto) Switch(config-if)# authentication host-mode multihost Router(config-if)# dot1x pae authenticator Router(config-if)# end 

    Source: http://www.cisco.com/en/US/docs/ios-xml/ios/sec_usr_8021x/configuration/...

    I used the same commands in another switch with IOS 12.x and I have no problem to complete the settings so... anyone know if:

    * Should I use other commands to enable this feature in this IOS?

    * Should I use other IOS?

    Thanks in advance,

    I guess you forgot to paste in the following command:

     switchport mode access

    Orders 'authentication... ". "will not be displayed when the port is always in dynamic/circuit to access mode. These commands are available only after you configure static port to be an access port.

  • How can I configure my magic jack so that it starts with windows 7?

    I am trying to set my magic jack program to start when windows starts, because I lost my phone so the computer will automatically update.  I currently updates off, but I want to be able to grasp the benefits of having updates while using the magic jack service for my phone.

    Hello

    To autostart, a program that does not have this option in its installation just copy the icon to your
    Startup folder.

    All users this copy:

    "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup.

    Click right button start - all users to explore and navigate to this folder.

    ------------------------------------

    For specific copy of users to:

    "C:\Users\The user Name\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup"

    Use start - computer or Windows Explorer to access that.

    ------------------------------------

    How to change, add or remove startup programs in Windows 7
    http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

    Autoruns - free - see what programs are configured so that it starts automatically when your
    system boots and you log in. Autoruns is also the full list of registry and files
    locations where applications can configure start automatic settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • How can I configure a time zone UTC to analog clock with actionscript 3?

    I use this code from a YouTUBE tutorial:

    addEventListener (Event.ENTER_FRAME, timehandler);

    function timehandler(event:Event):void

    {

    var currentdate:Date = new Date();

    second_hand.rotation = currentdate.seconds * 6

    minute_hand.rotation = currentdate.minutes * currentdate.seconds + 6 / 10;

    hour_hand.rotation = currentdate.hours * 30 + currentdate.minutes / 2;

    }

    And this clock work perfect, but how to set different time zone, not a time zone on the computer?

    currDate.time, not currDat.milliseconds.

  • How can I configure reader adobe XI as one of my printer port? Help, please.

    How can I configure reader adobe XI as one of my printer port? Help, please.

    Adobe Acrobat (Windows only) comes with a virtual printer that allows you to create PDF files. The free player does not work.

  • How can I configure Outlook Express to receive messages to different mailboxes (via POP3) but to send messages and responses using a single SMTP account?

    How can I configure Outlook Express to receive messages to different mailboxes (via POP3) but to send messages and responses using only a single SMTP account?

    In other words, I need to download via POP3 messages sent to the * address email is removed from the privacy *, * address email is removed from the privacy *, * address email is removed from the privacy * but I want to send messages using Mar SMTP service associated to * address email is removed from the privacy *

    If I get a message like * address email is removed from the privacy * I want to answer as * address email is removed from the privacy *.

    Is this possible?

    How can I configure Outlook Express?

    Concerning

    Marius

    You can do this if the Server SMTP allows you to send from a location that you are not connected via their internet service.  So if you have this permission, go to tools | Accounts | Add mail.  Then under the account of property | You want to set the server for incoming mail to the POP3 account, and then the SMTP protocol for the other account that you use to send servers.  And then indicate whether or not the server requires authentication, and if yes, then you will need to put in the user name and password for the SMTP server it.  Under properties. Advanced to define appropriate ports that may be different from the default value according to e-mail accounts.  You can also check the "leave a copy of messages on the server" for accounts POP3, if you access messages from multiple computers.

    Once you have an account set up, then you can set others upward in the same way, but change the POP3 properties for each while leaving the SMTP ones the same.

    Once you have all that in place, you might want to backup things in case something goes wrong: www.oehelp.com/OETips.aspx#6

    Steve

  • How can I configure computer mi to ACCEP https connection

    How can I configure computer mi to ACCEP https connection

    original title: my device does not accept the connection of the https port, I have Windows vista

    Hi, Rosariopenaranda,

    Do you get any error Messages?

    Tools > Internet Options > Advanced tab

    Scroll down to the Section navigation

    Uncheck Show friendly https error messages

    Click on apply, Ok

    Tools > Internet Options > Connections tab

    Click the Lan settings button

    Check automatically detect settings

    Click Ok, apply, Ok

    Change proxy settings in Internet Explorer

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-proxy-settings-in-Internet-Explorer

    HOW to: Use Wfetch.exe to troubleshoot HTTP connections

    http://support.Microsoft.com/kb/284285

  • How can I configure proxy credentials to WebEngine

    Hello.

    How can I configure proxy credentials to WebEngine?

    I found how to set the port via SystemProperties and the proxy host.

    System.setProperty ("http.proxyHost", "some.proxy.host");
    System.setProperty ("http.proxyPort", "8080");

    But I couldn't find the definition of authentication information.

    Thank you.

    For the moment, WebEgnine provides no special support for proxy or, more generally, HTTP authentication, but relies on what the pile of java.net. * offers in this area. So, to make your application use specific credentials when connecting to a specific host, create a subclass of java.net.Authenticator, implement the method getPasswordAuthentication in it as you see fit and install an instance of your subclass as the default authenticator by calling Authenticator.setDefault. See also http://javafx-jira.kenai.com/browse/RT-19215

    Published by: Vassili Baranov on February 14, 2012 08:28

  • How can I configure on a second two-factor authentication apple that isn't an icloud but rather my itunes account account ID? Only, I seem to be able to use two steps on the second account.

    How can I configure on a second two-factor authentication apple that isn't an icloud but rather my itunes account account ID? Only, I seem to be able to use two steps on the second account.

    You can not. Two Apple factor authentication is a feature of iOS and OS X, based on your AppleID being associated with iCloud account to send and receive authentication 6-digit codes. An AppleID that is not associated with iCloud account cannot be used for 2-factor authentication.

    For Apple ID - Apple Support two-factor authentication

    You can set up validation in 2 steps (which is different) with any AppleID - see frequently asked questions about check in two steps for Apple ID - Apple Support

  • How can I configure the cell data format

    How can I configure data format of cell numbers: for example, I want to capture 123456.78 and need to be 12A3456.78?

    I tried to put #A # #. # format option, but it didn't work a few time and it became A123456.78.

    I also tried on excel and it worked very well, but I like the numbers better. is there a solution to this problem?

    Thank you

    HEY Chi - Lun,

    I don't think that this is possible as many number format. You should be able to insert A in a text string using a formula, but this would happen in a second cell, not that the number has been entered.

    "Assuming all the"numbers require the same inserted letter after the second number, this should do the work."number" entered in column A; the formula in column B. In the table below, your value as an example is A6.

    = Left (A, 2) & "A" & RIGHT (A, LEN (A) - 2)

    Kind regards

    Barry

  • How can I configure firefox to play a beep sound when my yahoo or gmail mails to the?

    How can I configure firefox to play a beep sound when my yahoo or gmail mails to the?

    Hi, you could try the add-on x - notify .

    If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

  • How can I configure my Mozilla Thunderbird to me for new confirmed before leaving?

    I used to use Microsoft outlook. In outlook, we use the button 'close' at the top right of a mail to close this letter.
    In thunderbird, this 'x' is available on the top somewhere in the middle.

    To close a mail, I click on the upper right corner by mistake and the release of Thunderbird (which I didn't) by mistake.

    How can I configure my Mozilla Thunderbird to me for new confirmed before leaving?

    As far as I can see there is no easy way to do this. However, an easy option is to have the Thunderbird in the system tray on hitting the close instead of closing button. The add-on "Minimize on start and close" for Thunderbird accomplishes this mission and to close all what you need to do is right-click on the icon in the taskbar, and then click close to close actually it. I hope this helps.

  • How can I configure my chosen default font?

    How can I configure my cast chosen to send e-mail messages to the default position in order to avoid selecting each time?
    Any help for a novice like me would be appreciated.
    Thanks in advance.

    Go to Tools > > Options > > display > > formatting

  • How can I configure mobile android password manager copy all of my passwords from firefox to my office?

    How can I configure my new mobile password manager for my android phone copy all of my passwords from firefox to my office?
    Right now, I noticed there is only about 8 passwords listed.
    But my office saved password manager has about 50 listed.
    This makes me think that the android app is to choose only to remember what I saved directly with my android. I want to capture all my saved passwords from my desktop also.
    I tried recheck my firefox sync options, but only confirmed that I don't have this game automatically synchronize all my data (including passwords.)

    I found that I have to press the 'Menu' (three horizontal lines in a square) in the mobile view and connect until I'm able to meet Firefox on Android.

    Now that you're on your desktop: try passwords uncheck in synchronization preferences, wait a few seconds, then check again. Then on your phone, the settings of the open Android app, accounts & sync, choose your Firefox Sync account, then Menu > sync now.

  • How can I configure Firefox to automatically zoom when a site regularly?

    Some sites have a fixed width, and I like to zoom in some of them so that I can read the text better. How can I configure Firefox automatically zoom-in in some of the sites that I visit regularly?

    You can use an extension to set a page zoom and the size of the default font on the web pages.

Maybe you are looking for