How can I configure APN with B2G 2.0 on Geeksphone revolution with cellular consumption (AT &; T) in the United States?
Tried many settings and has worked with the staff of cellular consumption. (Consumer Cellular is an MVNO using AT & T). I had this work with ZTE C open (FFOS 1.3) after a few tries. (I should have written down all the settings before moving!)
At the moment I get a voice connection and a Wi - Fi connection, but no data connection. Network shows such as AT & T.
Here are some suggested parameters of cellular consumption:
Name: Consumer cellular
APN: ccdata
Proxy: Not set
Port: Not defined
Username: undefined
Password: not set
Server (if available): http://mmsc.mobile.att.net
MMSC: http://mmsc. mobile.att.NET
MMS proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: PAP
APN Type: default, mms, supl
Carrier (if available): unspecified
Another was CC LTE to identify
Android Samsung Galaxy Nexus my wife has no ccdata for AFN and IPv4 set for data and roaming protocols. None of the other things.
Thanks in advance for any help you can give me!
After the loading of 1.3 B2G (adb sideload, a lot of fun to help), then get an automatic update to B2G 2.0, I went to the page web consumer cellular, where I found the settings to update the tech support guy does not give me the previous night.
For anyone else who might meet this, here, they are for B2G 2.0:
Data settings
(Custom settings)
AFN - att.mvno
Host of the proxy HTTP - 66.209.11.32
The HTTP proxy port - 80
Authentication, Protocol and protocol - undefined Roaming
all other virgins
The message settings
(Custom settings)
AFN - att.mvno
Proxy MMS - 66.209.11.32
MMS - 80 port
MMSC - http://mmsc.cingular.com
Authentication, Protocol and protocol - undefined Roaming
all other virgins
Tags: Firefox OS
Similar Questions
-
Can I configure NISE with a switch of party - if the switch is not installed?
I've never used NOR Switch before Executive - we hope to use it on a new project.
We do not have equipment at the moment - we will use a Pickering 40-540-021 '132 x 4' switch.
I would like to configure NI Switch Executive before Pickering delivered cards, is it possible? I get an error when I create the NI Switch Executive virtual device. Seems that MAX is trying to communicate with the switch card before allowing me to configure routes/exclusions/groups etc..
Here's what I've done so far:
-Install the drivers of Pickering.
-To the MAX (v5) I have setup a session driver IVI and logical name.
When I try to create a new NI Switch Executive peripheral virtual, I add the logical name of the switch, click [next] and get the NISE error...
"An error occurred so they were trying to access the devices PROJECTSWITCH. The primary error: unknown status code (Hex 0xBFFA400C).
I see that a virtual device is created with no logical switch assigned. I get the error even if I try and add a logical switch manually to the virtual device NISE.
Is it because the switch Board is not available for the system? Can I configure the routing/groups/exclusions without the device being mounted physically switch?
Thank you
Alan
Alan.
Seems that MAX is trying to communicate with the switch card before allowing me to configure routes/exclusions/groups etc..This should be the expected behavior. NEITHER Switch Executive tries to communicate with the instrument before allowing you to configure routes to ensure that there is no problem that would affect the operation of the Switch Executive. In your case the pilot trying to communicate with a non-existent device.
I would like to configure NI Switch Executive before Pickering delivered cards, is it possible? Can I configure the routing/groups/exclusions without the device being mounted physically switch?
It is possible that all compatible IVI devices should have the ability to simulate.
It seems that you have configured your session of IVI driver incorrectly for a simulated device. I try and make sure that in the session driver, under the 'Général' tab, select the drop down menu to "Simulate with" and select 'Specific driver' and then click 'Save the IVI Configuration'. This will return the Pickering driver selected in the 'software' tab and simulate a device. This should allow you to create a virtual device NI Switch Executive and develop and test the code on the simulated instruments.
I would like to know if you have any other questions.
-
How can I create VI with inputs that run immediately when the update?
I'm using LabView for controlling stepper motors. I would create a VI with a front panel that has 4 arrows, 2 per engine. My goal is to be able to run the VI and then press a button to move the engine.
I created separate VI for each funcition of engines - one vi to set current operations, to determine the current travel, another to move up by a certain amount and so on. Work of these vi and I can move and adjust engines, but only by running separate VI.
How can I combine them into a single VI and make them run to the pressure of a button or the change of a property? An example would be to establish a new current holding company and place the operation current vi run immediately and send the order to the engine. Then continue to press the arrow keys without having to hit 'run' on an another vi.
Thank you very much
-
How can I access MSN with digital images and records of the captain.
How can I downloan on vist MSA workikng with digital camera
I HAVE VISTA PACK 2... How DO to DOWNLOAD or ACCESS MSN WORKS WITH DIGITAL PHOTOS AND WORKING WITH PIX FILES? JMCULPEPPER
Hello
For the different Forums for Windows Live Applications, select the link below
Welcome to Windows Live Solution Center
-
I am interested in establishing a VPN for my computer. I looked at some of the information to help Ms. I'm missing something in the way of understanding how do or end the connection.
You can configure VPN regardless of static or dynamic IP, both are possible. You can refer to:
-
THIS COMPUTER IS NOT ONE I HAVE PROBLEMS WITH. I HAVE THREE THAT WORK FINE.
- Click Start, then Control Panel
- In Control Panel, if you are in Classic view, click Control Panel Home (upper-left)
- Open the clock, language and region
- Click on regional and Language Options.
- Click the keyboards and languages tab and then click Change keyboards.
- Under installed services, click Add.
- In the add input language dialog box, select the keyboard layout that you want to add in the available list, and then click OK.
- The keyboard layout that you added will appear in the list. To set the new layout as a default, select it in the list. Click OK to save your changes
- You can switch between different input languages (= keyboard languages) by clicking on the button on the language bar, or by pressing the Alt + shift.
-
How can I configure my PCG 61611 laptop to automatically play CDs and DVDs?
It does nothing when I insert a CD or a DVD. How can I configure t automatically play them when I put them.
NNNNN,
Here are the instructions to activate automatic playback. Here is a link with the AutoPlay of Microsoftutility.
-
How can I configure computer mi to ACCEP https connection
How can I configure computer mi to ACCEP https connection
original title: my device does not accept the connection of the https port, I have Windows vista
Hi, Rosariopenaranda,
Do you get any error Messages?
Tools > Internet Options > Advanced tab
Scroll down to the Section navigation
Uncheck Show friendly https error messages
Click on apply, Ok
Tools > Internet Options > Connections tab
Click the Lan settings button
Check automatically detect settings
Click Ok, apply, Ok
Change proxy settings in Internet Explorer
http://Windows.Microsoft.com/en-us/Windows-Vista/change-proxy-settings-in-Internet-Explorer
HOW to: Use Wfetch.exe to troubleshoot HTTP connections
-
How can I configure Google Analytics event tracking in Muse?
How can I configure Google Analytics event tracking in Muse?
Hello
Please check this after the thread, it might be useful
Ability to add Google Analytics to track the link/button click?
-
How can I configure APEX to use wallet?
Hi people,
How can I configure APEX to use wallet? I want to call a Web service (https) in the APEX.
In the database, I just use:
Thank youutl_http.set_wallet(c_wallet, c_wallet_access);
TomasHello
This might help
http://download.Oracle.com/docs/CD/E14373_01/admin.32/e13371/adm_wrkspc.htm#sthref200BR, Jari
-
I have an iTunes, to the United States account, but want to buy Brazilian music from the ITunes store, which is currently not available in the United States. Can I use a gift card ITunes of Brazil to buy with my US iTunes account in the United States? -Thanks! -R.
No, you can't. You will need to be glued to the Brazil to use the store of Brazil. These are requirements of Apple. You would not be able to use a U.S. account in the Bank of Brazil, and you could not add a gift card of Brazil to a U.S. account.
-
How can I configure my computer to the simple click with the mouse to double-click to open an item on the desktop instead
Hi placebow,
Open the Options folder by clicking the Start button, clicking Control Panel, appearance and personalization, and then clicking Folder Options. On the general tab, click single-click to open an item. (To return to the standard click, click double-click to open an item.)
The setting applies not only at the office, but also in other areas of the shell.
Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience] -
How can I configure my computer to another person can use with their own password and do not go through the mine?
Hello
Activate the guest account or setup a new account with the access levels that you must allow.
either will work.How to activate the guest account enabled or disabled in Vista
http://www.Vistax64.com/tutorials/126933-guest-account-turn-off.htmlHow to create a new user account in Vista (also see the related tutorials)
http://www.Vistax64.com/tutorials/93009-user-account-create.htmlUser accounts in Windows Vista
http://www.optimizingpc.com/Vista/multiple_useraccounts.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
How can I configure the element with the script names?
Could Hello someone give me a hand?
I created symbols on the stage of this script below.
------------------------------------------------------
for (k = 0; k < 5; k ++) {}
sym.createChildSymbol ("mySymB", "Stage");
}
------------------------------------------------------
How can I configure the element with the script names?
Because, when I try to control a symbol by using the getSymbol("---") command.
I need to know the name of the item given to each symbol.
Concerning
Yes, you're right.
Using 'Code-Example' If you write sym.getSymbol ("mySymB") that edge returns the undefined value.
With "Drag-and-drop-Example", you can use sym.getChildSymbols ().
-
How can I configure my Airport Express to mesh with new cable modem bridge mode?
Time Warner sent me a new cable modem and my Airport express still flashing orange light. How can I configure the Airport express in bridge mode?
You can simply do using AirPort Utility on your iMac or iPhone, as follows:
- Run the AirPort Utility.
- Select the AirPort Express Terminal and then, select change.
- For a Mac:
- On the network tab, change the router Mode to: Off (bridge Mode)
- Select to update and allow the base station restart.
- For an iOS device:
- Select Advanced > DHCP and NAT
- Change the router Mode to: Off (bridge Mode)
- Select done and allow the base station restart.
Maybe you are looking for
-
I use Origami as my screensaver and changing images quickly, is there a way to slow the progression from one slide to another?
-
Hi does anyone know where to find a plate S20 manage cosmetics(The small cover that you put in place when you remove the handle) P/N 41R5699 for a reasonable price (I haven't found for $100) Thanks for your help, Garry, Center of the Australia
-
KB974571 - update security for Windows 7 - Windows 7
On my aunt's computer, I can't get this update to install. I did a search earlier and one person mentioned that I need to run the Windows Genuine program, I had to do the same before similar to XP SP3 on his computer (I think the HARD drive may be d
-
HP dv7 (2010) won't start.
I tried to start my computer this morning and got a black screen. The caps lock flashes every 2 seconds, and the wireless button is orange. I tried to resseating memory, but it does not work. I tried to unplug and it runs on battery, no dice. If I ne
-
Use of VM not displaying disc not
Hello I was wondering if anyone knows why, when I drill down to a virtual computer or through VMExplorer, I don't see the use of the disc. The gauge is just a black ball instead of green/yellow/red. Any help in getting this work would be much appreci