How can I configure my computer laptop hp g61 to the original settings, I already backed up

Similar Questions

• How can I configure my computer to start automatically on the hard drive?

  When I connect to my desktop does not start as it tries to boot from the floppy drive. I have to press F9, then when I see "Select first boot device" scroll down to the hard drive. How can I re set my computer to start automatically on the hard drive?

  How can I re set my computer to start automatically on the hard drive?

  It would depend on the BIOS you have.

  What is the brand, model and model number of your PC?

• How can I connect my computer laptop compac evo n1020 ATI Radeon IGP 340 m of my LCD

  Original title: Hello,.

  How can I connect my computer laptop compac evo n1020 ATI Radeon IGP 340 m of my LCD? do I need special drivers?

  Hello

  See the following articles for more information:

  Setting up dual monitor: two screens are better than one

  How to configure and use multiple monitors in Windows XP

• How can I configure my computer to the simple click with the mouse to double-click to open an item on the desktop instead

  How can I configure my computer to the simple click with the mouse to double-click to open an item on the desktop instead

  Hi placebow,

  Open the Options folder by clicking the Start button, clicking Control Panel, appearance and personalization, and then clicking Folder Options. On the general tab, click single-click to open an item. (To return to the standard click, click double-click to open an item.)

  The setting applies not only at the office, but also in other areas of the shell.
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• How can I configure my computer to another person can use with their own password and do not go through the mine?

  How can I configure my computer to another person can use with their own password and do not go through the mine?

  Hello

  Activate the guest account or setup a new account with the access levels that you must allow.
  either will work.

  How to activate the guest account enabled or disabled in Vista
  http://www.Vistax64.com/tutorials/126933-guest-account-turn-off.html

  How to create a new user account in Vista (also see the related tutorials)
  http://www.Vistax64.com/tutorials/93009-user-account-create.html

  User accounts in Windows Vista
  http://www.optimizingpc.com/Vista/multiple_useraccounts.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I configure my computer to it won't go into power saving mode every 2 min

  How can I configure my computer to it won't go into power saving mode every 2 min

  How can I configure my computer to it won't go into power saving mode every 2 min

  Change the configurations screen saver and hibernation / sleep appropriate for your desires.

• How can I configure my computer to open pdf files using Adobe DC instead of Microsoft?

  How can I configure my computer to open pdf files using Adobe DC instead of Microsoft?

  Make a right click any PDF file and select open with... Choose the default program.

  Then select Acrobat in the list and check the box to make it the default application.

• How can I get my computer to automatically connect to the internet whenever I turn it on?

  Connect computer to internet automatically switch on

  How can I get my computer to automatically connect to the internet? Currently, I have to press Fn F1 to activate the WLAN - not something huge, but a tad boring. Another computer on the same network will connect automatically in setting in motion.

  It is a 'feature' of the particular computer you are using. Take a look at the manual; It may be a setting in the BIOS to turn on the wireless on startup.

• How can I configure windows update in order to start the procedure, when I connect to the school network?

  OT:help configuration of Windows Update.

  I use windows 8, now my problem is that I have to enter a user_name and password each time you start the browser, if you close the browser, or open another browser, you must enter user password again once you use a wifi or lab computers. Now when I connect to wifi, my browser instantly request name username-password but windows update is not so. I tried this a few times, only once named windows update displays dialong box asking username and password and it takes hours to do.

  How can I configure windows update already if start update already when I connect to the school network.

  Wifi authentication which traverse the browser means that you still need to open a browser and a connection that first, before any other programs can access the network.

• How can I configure my computer to run an application using only a specified quantity of my carrots?

  OK, I have a game called Star Wars: Knights of the Old Republic. The game does not use more than 2 cores, the problem is when I start the game without going through the Task Manager and manually set its priority to 2 hearts my usual game show on my screen, it will be black so I have to run the Task Manager to force the game to close. So what I'm saying is that whenever I want to play the game or launch the application, I have to open the Task Manager, find the game or application, and then right-click to set the number of cores in the processor to use and sound really get some tires. I was wondering if there was a way to instruct your computer to use only 2 cores at the launch of this game. I have Window 7 Home Premium, 8 GB of RAM and a graphics card in Asus R9 280.

  Some cpu overclocking tools have a basic framework of cpu, and you can make a profile for these games, which limits the number of cores. In the past I've used used AMD OC tool for this.

  -If your cpu is Hyper-threading, try disabling Hyper-threading technology.

  -J' saw a few messages about this game, but don't remember any specific game fixed and did not

  heard of him having a problem with quad core cpu.  I have no problem with a quad core cpu with AMD Phenom 965 or Intel 3570 KOTR.

  It is installed without using any sort of compatibility settings. I'm surprised I didn't even

  fixes, or patches. It seems to work without the CD, if you use the StarWars - KOTR.exe spot

  of the LaunchKOTR.exe as well.

  He has run correctly on GTX560ti, GTX770, HD7970 and Intel HD4000 chart, but I don't have

  reminder if she had a little problem with running in a window with pilots earlier or not. Probably not as

  the same happens when you use the Intel HD4000 graphics.

  I just found (rediscovered?) that the game always starts in windowed mode

  (there is no option of mode in the settings or .ini however), but if I change the resolution

  It goes full screen in one of the other options 1280 x 1024 (there are three of what appear to be the same resolution and refresh speed settings).

  When you use two Intel HD 4000 graphics the graphics settings are also not available.

  [EDIT: my machine with the PhenomII965/GTX560ti doesn't have this problem of windowed mode.]

  It is quite rare for games to have real issues with quad core cpu.  Fallout 3 is the most recent

  I met (Yes not nearly as old as KOTR), and it took a change in the configuration file

  in order to limit to two hearts.

  I also had a couple of games that are configured to run on a single core at the Phenom 965 CPU usage at the time.

  I used the AMD OC tool to create a profile with all but a core disabled, for each of these games.

  -I do not use a parameter core with any games ATM, but some games running on

  my machine with Intel processor and 770 a short while back only works on atm HD4000 Intel

  (Memory, they were OK with the HD7970, using the version of the driver 13.9 or 13.12?) ).

  Games that only work with Intel HD graphics card on the machine with the GTX770, always works on my machine with a PhenomII 965 and GTX560ti. Go figure...

  .

• If I create a second account (different) Zotero on the same PC, how can I configure it's empty without destroying all the records in the other account?

  I have long had a Zotero account and it works fine. I recently merged in a group with a few other people into account; We share the same set of references. Now I want to set up a personal account for different purposes, perhaps becoming a different group. When I try to set up the new user name and password, the same reference shows always. How can I start with an empty account for the new user name without clear items from the old account?

  I know Zotero and just the second jscher2000 tips - if you want to actually different accounts, you must use separate profiles of FF.

  The integrated solution for Zotero is to use groups for sharing of resources between people
  www.Zotero.org/groups/
  And have your own resources in a different group or in 'my library '.

• OfficeJet Pro 8600. How can I configure default printer 2 faces to avoid the re-creation of each print job?

  You need to change the default value of the print side single 2-sided print OfficeJet Pro 8600 running on iMac OS X 10.6.8? I can print 2 sides but don't know how to do as a default value. Need help.

  Hello

  A preset is an option provided by the OS X print dialog allowing you thus save print settings used.

  1. Open the file that you want to print.
  2. In the menu file , cclick Print. The print dialog box appears.
  3. Change the print settings to perform a duplex print job.
  4. On top of the print just after the name of the printer dialogue box, you will find the menu presets.
  5. Open the presets menu, and then select Save settings as a preset.
  6. Assign any name to save the preset, and then click OK.

  Now the saved preset settings will by default be used until any other preset is selected.

  Hopefully it's clearer now,

  Shlomi

• How can I start my computer when ive zip produced the startup boot file

  How can I start my hp ive filed zip the startup boot file and it cannot open it to start, whats my options now

  I have some compressed files and the boot of boot file was there and now it used or cannot open the compressed files to get started

• How can I transfer images from external hard drive with the gateway settings to new computer?

  I used to use Adobe Bridge on a computer that no longer works. My computer tech then made the hard drive of this computer on an external hard drive. Now I want to transfer all those images with all the settings, I applied them to my new computer. My new computer is a PC with Windows 7 and I run Adobe Creative Cloud on it.

  Thanks for your reply. Where the xmp file?

  It depends on your preferences settings. By default, Bridge is set to store metadata in an XMP file. This is the file that has the same name as the original, but it only use the extension ".xmp" instead of Raw file extension.

  Bridge stores this file in the same folder as the original. If you use Bridge to move the files to another location it selects automatically the xmp files to travel with her.

  If you use the view menu / show hidden files, you will see what Curt meant by XMP are hidden files, all have a document icon.

  If you converted to DNG RAW format this data is written to the file itself, as is the case with other types of files such as jpeg and tiff, that can be managed by the cab.

  You should be able to copy the whole folder to your new system or bridge to the old disk, select the file in the content panel and the use of the Control Panel folder to navigate to the new location and use drag and drop

  Many options

• How can I get my vista reset and return to the factory settings?

  How can I get my vista back to factory settings

  Hello

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246