How can I configure my Time Capsule wireless for backups

Similar Questions

• Can I use the Time Capsule wireless for multiple computers without using it as a router?

  I am looking for an external backup for 2 computers drive.  I have a desktop iMac and MacBook Air.  I like the idea of being able to back up my MacBook Air wireless, but I need to make sure that it will work the way I need to.

  I already have a wireless router that works well for me, I don't need the time Capsule to act as a router. I'm just needing a wireless backup drive.  So, the question is, can I use the only time Capsule as a storage device for backup of wifi or do I also have to use it as a wifi router?  My fear is that the router service is not as good as the router, I currently have.  I live in a big House of 2 floors, making it very difficult to receive a strong signal throughout the House.

  can I use time Capsule only as a backup wireless storage device or do I also have to use it as a wifi router?

  Time Capsule need to connect to your router/modem existing using wired Ethernet wired, permanent.

  If you plan to use the time Capsule to back up your Mac with the help of the application Time Machine on every Mac, the Mac will have to save on the wireless signal Time Capsule for the process to be officially supported by Apple.

  While it is possible to turn off wireless on the Time Capsule and try to save it to your existing wireless network... and it pourrait work... but there will be no Apple support backup problems... so it would be a good idea to plan to use Time Capsule wireless backup purposes.

• How can I configure my Time Capsule (its predecessor) as an extension of WIFI network?

  I have the previous model of the time Capsule and a new version and two MAC computers. I want to use the Capsule of ancient times to extend my WIFI network. I have a MAC with a new current version of time Capsule in the center of my house. I have a second MAC set up with an earlier version of a time Capsule in my office. I want to expand the network from the center of my home, further, beyond my office. Anyone know what I need to do? THX!

  Place the old TC in the same room as each other.

  Do a factory reset.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  Open airport on the Mac utility and configure the old TC... it will automagically want to extend wireless.

  Complete the installation, then move the TC to a suitable place where it picks up good signal from the main TC. There is no need to a position of bad signal... then place it where the speed is close to full... but then covers your current area of dark (wifi not light).

  Fact... Voila... easy as pie.

• How can I use my time capsule as a hard drive on an existing network accessed through a password

  How can I use my time capsule as a hard drive on an existing network, storage, accessed through a password?

  We need more information in order to provide the right solution and Setup for you.

  You already have another router Apple... as an AirPort Extreme or Airport Express that provides the signal of your wireless network?

  If not, what is the serial number and model of your modem?

  Finally, what operating system is installed on the device you will use to install and configure the time Capsule? If it's a Mac and you're not sure what operating system it uses... click on the Apple icon in the upper left corner of the screen, then click on about this Mac, and post back with number of Version of OS X that you see there.

• How can I remove a time Capsule backups I want to recycle?

  How can I remove a time Capsule backups I want to recycle?

  Reformat the disk via disk utility. This will remove all the contents of the disc.

• How can I configure two Time Warner Cable Road Runner under Outlook Express e-mail accounts?

  Multiple e-mail accounts

  How can I configure two Time Warner Cable Road Runner under Outlook Express e-mail accounts? I wish I could separate emails for each account, but the access or the other at any time.
  You can use two different identities, or if you want to have access to these accounts in identity, set up your accounts and use message rules to move incoming messages.
   
  First, create a local folder to be used as a second Inbox and name it anything you want.  Use it to one of the accounts, as well as the default Inbox for the other.
   
  Then create a message rule.
   
  Where the message comes from the specified account.
  Move it to the specified folder & stop processing more rules.
  Click: specified account and enter the account name for the second Inbox.
  Click: specified folder and select the folder that you created.
  Name the rule.
   
  Move the rule to the top of the list of rules, and incoming messages will be separated into their respective folders.

• Please how can I configure / add my hp wireless printer to my window 7

  Please how can I configure / Add
  my printer wireless hp in my window 7

  Hello

  Millions and millions of printers are out there, what is your printer? You need the CD. Just put the CD in your Windows 7 computer, run the installer and follow the instructions on the screen.

  Kind regards.

• How can I configure my keyboard Microsoft Wireless Comfort Keyboard 1. 0 has (1027)

  How can I configure my Microsoft Wireless Comfort keyboard 1. 0 (1027), there are buttons on here I know I can use real well. I just need to know how to set out them. can someone please help me.

  You have installed the Intellmouse drivers for it?

• How can I configure my NSB M730R wireless mouse

  How can I configure my wireless mouse NSB M730R for my laptop Dell with Windows XP?  My husband threw the instructions before it was connected.  Thank you!

  See this site.

  Manual

  http://www.lexmausa.com/upload/DA2F4623-F599-4696-B0D3-B07B8D4BE28F/LS7250manual2DlC285C3A62D012DEN2Epdf.PDF

  Support

  http://www.lexmausa.com/support/

• How can I restore my time capsule documents folder?

  I use an iMac OS X El Capitan and support up to a Time Capsule airport running.

  One of our user accounts on the iMac ran into problems w access to the apple of the user ID (could not access iCloud preferences, etc.) before doing a clean reinstall of the OS X software, so I opted to try to remove the problematic user account (another account has no problems) and then configure a new user account. It seems (the jury is still pending on that) have toured and account is running normally.

  My question now is to restore a subset of the records of the time Machine to the specific user. Is it possible and if yes, can you give me instructions on how to do?

  Thanks in advance.

  Migration wizard does not have the granularity you need. It is simply not possible to choose more great lines.

  So, you'll need to do it via the standard recovery... method that looks like you have never used.

  This is the basic method of use Time Machine, you will need to learn how do.

  TM open via icon in the dock. If this isn't in the dock it from applications.

  All you have to do is open TM...

  Go to the date when the user has always existed.

  Now in the finder as the interface.

  Go to the user that you want to restore... I suggest that you actually just take the folder of any user.

  Sorry I can't take screenshots inside the TM... so if this is not clear look at a standard youtube video, of which there are hundreds.

  It's the old version... but it is clear and well spoken.

  https://www.YouTube.com/watch?v=6bcf54aRBPk

  Restore now all the folder to somewhere else... maybe not even on your hard drive, but on a USB key or a convenient place.

  Once the entire restored user to a location, you can then choose say all the documents in the documents folder and copy it directly to the new user that you created, file documents... same thing for music, even for photos etc... the actual application should always be connected libraries... which will make you within itunes or photos, etc..

  Our great master guru on this stuff is Pondini, who died some time ago... and it is a few obsolete versions... but it is always interesting to read.

  About the use of configuration and migrate...

  http://pondini.org/TM/home.html

  The real using TM

  http://pondini.org/TM/FAQ.html

  The restoration is Q14-17 and fairly detailed.

  I made an example using method pondini... just iphoto, but gives a good idea how do...

  Cannot access old files on time capsule

  If you want to just retrieve the documents folder say... Then, you can use the same method... Simply select the entire folder.

  The permissions problems arise often... but once the files on your local disk, you can correct them.

• How can I unforget airport Time Capsule?

  I was in the Airport utility and 'forgotten' my Time Capsule airport.  The most convenient airport seems to work very well, but I can see it is no longer in the graphical presentation.  How can I fix so that I see once more the airport?

  Try a cycle of complete nutrition of the network as follows:

  Power off all devices... modem, routers, computers, iPhones, printers, etc. in the order you want

  Wait a minute

  Start the modem and let it run alone for a few minutes

  The device connected to the modem to start and keep running a minute

  Keep the commissioning of the devices at once a minute outside until the entire network is back

  Check if the airport appears now and communicate your results.

  IF... the airport does not appear in the utility AirPort... are you still using OS X (10.7.4) on your Mac, you put in your profile, or you have updated to a more recent operating system?  If so, what system would be that?

• How can I configure the ms 5000 wireless comfort keyboard shortcut keys?

  just bought ms wireless keyboard comfort 5000 and have already ruined the shortcut key to send.  would also like to know how to assign shortcut keys

  This is for a Microsoft Surface device, or another type of PC?

• How can I configure a guest of execution for a web forms.

  where can I find details on how to set up a guest of execution for a web forms.

  SPTR is created on the rules or rules calc Manager or business, if you want to understand more, first of all, go to http://docs.oracle.com/cd/E17236_01/epm.1112/hp_admin/frameset.htm?ch06s09.html
  There is also a link from this page on run time application.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How can I download a driver free wireless for windows 7?

  I have uninstall some unwanted toolbars from my computer and somehow my rieless driver has been removed with one of them. How can I get another one for free?

  http://support.Acer.com has all the drivers for your computer. Just click on the image of computer desktop/laptop/netbook computer, ect and choose the model of your computer. WiFi drivers are at the bottom of the page.

• How can I configure my Windows Phone 7 for ePrint? I have the printer online and set up.

  Now how can I set the phone to eprint?  I tried to put the address of e-mail on my phone, but it does not recognize it as a "valid e-mail address.

  Any suggestions?  Very much appreciated.  Happy/Safe holidays to all )

  Hello Christopher715,

  Looks like the process you've tried is good, there may be a neglected detail.

  On your phone, have you tried to email from your printer ([email protected]), without adding it to your address book yet?