How can I configure Satellite A300-148 boot from the recovery partition?

Similar Questions

• How can I get WIndows8 TouchSmart to boot from the recovery disc

  How can I get WIndows8 TouchSmart to boot from the recovery disc? With the recovery in the drive disk when I do a reboot or stop and start it does not read anything from the DVD player. My computer is a HP TouchSmart 23-D160QD.

  @AirForce9731,

  You may need to change the boot order to boot from the DVD drive first.  The steps to do this are in the document below.

  http://support.HP.com/us-en/document/c00364979

  These are recovery disks made by the recovery discs sent by HP?  They will not work in a different system (you will receive an error message), but you are able to get the boot floppies in a different system?  They should be able to start up to a point where the error message will be displayed.

• How can I configure my computer to boot from the CD Rom drive

  I have Windows 7 home version and I have a problem with booting from the cd rom.  I did a cd bootable for a work at home job, but it will not work properly.  It works fine on the desktop of my sister, but not my laptop.  What is happening is the CD loads when I restart my computer, but then it goes to a black screen and just stays there until I have eject the CD.  I can hear the CD running, but I get nothing after the initial splash screen.  I have reset the bios to make sure that the CD-Rom was placed up in the boot parameters.  Any ideas why this CD will not completely loaded?  Thanks for any help you can give.

  Gayle

  Please note, in order to install Windows 7, you must have a DVD player, if you have a CD-ROM drive, which will not work.

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

• XPS 12 / Win 8: how to boot from the recovery partition / reinstall Windows?

  Messed up things on a newly purchased 12 XPS in Windows 8, and I want to boot from the recovery partition and reinstall windows.

  Support online pages point by pressing F8 during startup, but this does not at all.

  How can I access the recovery partition?

  To access to the menu of, , press F2.

  To enter the boot options menu, press F12.

  Because the XPS 12 boots so fast, it is better to repeatedly press F2 or F12 after restarting the machine. During the startup process, texts for options should appear at the bottom right of the screen. If you enter Windows, you will need to restart again and press F2 or F12 until it works. However, I don't think there is an option in the BIOS to restore the computer to its factory condition. The previous post by DELL-VIKRAM M describes how to properly restore the machine to its factory state.

• Satellite A10: Cannot boot from the recovery CD after the replacement of the motherboard

  Heres one in your brain is going...

  I recently started a format hard drive via the normal recovery CD, but it never finished as long as the power cut.

  Not to worry I thought, I kept all my data and a new motherboard was on order.

  The fitting of the new Council, I tried to boot from the recovery disc and all I get is 'non-system disk '.

  Then I replaced the HARD drive with a former to check the functionality of the Cd. The old disks (I tried two) both still booted from the cd and their HDs has worked fine once in windows.

  However...

  When I try to start any of these 'good' HDs from the cd nothing happens, nada zilch. In fact they will not start even to a 'Beginner PC' recovery disk either, so it's not the Toshy recovery disk.

  Another weird thing is when I go into the bios by pressing ESC the power upward and then F1 and try to change the boot sequence and press end to exit and save, nothing happens.

  If the CD is not defective because it is recognized in windows
  The recovery disks may not be at fault because the other disks also fail to start.

  This is not a drive problem hard as other HDs start normally (but not Cd)

  This could be a fault on the new motherboard, perhaps a problem with bios, or the sequence of events suggests something else?

  Any suggestions would be welcome

  Paul h

  Hello

  Long story. In my opinion you should write is a little shorter but with more useful information.
  I am interested in one thing: have you got a new mainboard or used one?

  To be honest, I'm also confused with the recovery disc you are using. The history is confusing.

  > so this isn't the Toshy recovery disk.
  Can you please tell us what kind of recovery CD are you using exactly?

• How can I stop my Vm to boot from the network?

  OK, newbie still problems here!

  I have an iso on the data store and the parameters of the virtual machine pointing to iso with "connect to feeding on ' and 'connected' created, but it keeps trying to boot from the network and shows:

  Start-up of AMD Am79c970A NET

  Copyright info blah blah

  CLIENT MAC ADDR: vlah bla

  PXE - M0F: no boot file received

  PXE - M0F: Exit Intel PXE ROM

  Operating system not found

  I don't see anything I've missed, I searched this forum and tried Googling.

  Thank you

  Hedley

  Are you sure that the CD is a bootable image?

  Try with an ISO file.

  André

• Satellite M40 - cannot boot from the recovery cd after format HARD drive

  Hello

  After my Satellite M40 - 133 being affected by the virus of security internet I had to wipe my hard drive. The virus wouldn't let me do anything, boot without failure or system restore. I wiped the disk and it still wouldn't load up. That's why I had to do a full erase of the disk including the hidden partition.

  After doing his now do not let my boot from the CD of restoration as it says invalid partition as his search for files that must be on the hidden partition. What can I do to get it started. I'm not bothered about to recover anything on the disc. If I remove the hard drive and put the recovery cd in, it excludes the disc and begins to start until he fails to see the hard drive.

  Outwardly I can link the drive to another pc and he sees it as a storage device so I'm glad that there is nothing wrong with the hard ware - help please

  Hello

  Can you see the HARD drive with all the details in the BIOS?
  If this isn't the case, then this means that the HARD drive is faulty or not fully compatible.
  If you can see the HARD drive in the BIOS, then this means that the HARD drive is compatible.

  But this should not affect booting from a bootable CD.
  Even if the HD would not be recognized in the BIOS, you should be able to boot from the CD. For example a live Linux CD has not only any disk HARD because the BONE would not be installed on the HARD drive, but it loads into RAM.

  The question is; Why you are unable to boot from any CD?
  Maybe the discs are scratched or the CD/DVD drive cannot read the disc more because of problems of laser lens
  If possible, try to copy/burn the Windows CD using another computer, and then try to start using the copied disc.

• How can I get network connection when booting from the usb key or dvd

  Computer: HP Pavilion P6-2450eo

  Secure boot disabled

  Legacy Boot enabled

  Thruogh F9 I can boot into uefi since a key USB and DVD mode, but I can't seem to program loadet network connection. I tried with 13.04 Ubuntu, Linux Mint 15 and Boot Repair - all with the same result.

  How can I get the programs get started with network connection?

  On thanks in advance!

  poul1304

  Please check that the programs (Ubuntu, Mint, Boot-Repair, etc.) that you attempt to use it, press the controller Atheros AR8161L gigabit ethernet in native mode. Not all operating systems and software are supported each otut device or the network configuration of the box. Several times, drivers must be loaded or injected into the operating system for a device working properly.

  Please send Bravo

• Satellite A200 - cannot boot from the recovery disc - code 1

  I have Vista business and my laptop is running slow and is full of rubbish.
  I have in the past used my drive recovery to completely re - install vista and start from a fresh version.

  However, I tried this once and it says that it cannot boot from cd - code 1.

  Can someone tell me what it is and how to reinstall vista?

  Hmm. strange.
  Are you sure you have the right recovery disk?
  Are you abele to boot using another drive as MS Win XP CD or Linux CD bootable?

• How can I configure my system clock to match the correct local time

  How can I configure my system clock to match the correct local time?

  All about the time, date and in particular time zones for your particular question...

  http://www.7tutorials.com/customize-date-time-and-all-related-settings

• Satellite A300-1mz I use the recovery disks after an upgrade of the HARD drive?

  I'm upgrading the disk hard of my * toshiba a300-1mz *, but I am sure that I can use the * recovery disks * marked the first boots to the l.o. (vista)

  I expect your support...
  Thank you very much...

  Hello

  Yes, you can do it!
  If the HARD drive has been recognized by the BIOS, then you should boot from the recovery disk Toshiba in order to reinstall the operating system which has been pre-installed by Toshiba.

  Welcome them

• Vista 64 does not start after the bios screen. Can not boot from the recovery cd or help

  Last night a MS pushed a windows update and my pc restarted automatically.  But it does not actually restart.

  The PC goes through the bios tests, passes and then crashes and does not start in Vista.

  I can't start at all, including safe mode.

  I can't the system recovery option in HP bios to load.  Can I only use my Vista64 system recovery bootable cd or actually start.

  First of all, I thought it was a HARD drive problem, but tests of the bios disk hard that all spend, even the 2 hours 'SMART' test that he was running.

  Help

  Hello

  What happens when you try to boot from the recovery CD? You receive messages or error codes?

  You can check if the boot in the BIOS settings priority is configured to boot to CD\DVD.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  For more information, you can consult the following article:

  BIOS: Frequently asked questions

  If you still experience the problem, you may need to contact HP for assistance.

  HP support

  Hope this information is useful.

• How can I delete several clips at once from the timeline

  How can I delete several clips at once from the timeline?

  Thanks, Dan

  Shift-click or command-click to select if they are contiguous. Then press the delete key.

  Or select them and use the keyboard shortcut command + X.

  Or select them in the Index of the Timeline and use the key DELETE or command + X.

  Russ

• an outlook Express account can be restored after a clean boot from the XP operating system

  an outlook Express account can be restored after a clean boot from the XP operating system

  If you set up from scratch.

• I have photoshopCC, but some how I get pop ups saying that my path for cs6 is expires, and then I buy and get a licience no, well I have not because I have a year of photoshop and lightroom CC. How can I get rid of this message from the trial please my

  I have photoshopCC, but some how I get pop ups saying that my path for cs6 is expires, and then I buy and get a licience no, well I have not because I have a year of photoshop and lightroom CC. How can I get rid of this message from the Marie trial please

  Go to Photoshop forum