How can I configure the keys easy to work with iTunes on Satellite P300-150?

I have a Satellite P300-150. The easy (the illuminated keys above the keyboard) keys work fine when iTunes is in the foreground, but I want them to work when I minimized iTunes or switch to another window. I found the "TOSHIBA button Support" utility help within TOSHIBA, but it only allows me to set it up as the "Enlightenment" and "CD/DVD" [drive] (the two left most) easy keys make...

Any ideas please?

Thank you.

I doubt that this is possible
I m using the WinAmp instead of Windows Media Player and the CD/DVD button works with Winamp. I want to say I can run Winamp by pressing this button, but I can't use the game, break, buttons forward in WinAmp.
I think that it is not possible also with ITunes I've never tested, but it seems that it s not configurable.

See you soon

Tags: Toshiba

Similar Questions

  • Satellite A200-1AE: How can I configure the settings of buttons Dual Mode Pad?

    Hello

    I recently bought a Satellite A200-1AE. I tried to configure the default first button on my touch pad (lower left) so that I can fire up MSWord, but it did not work.

    Now every time I have set the mode button and press this button, that nothing not to pass - I lost practically this button.

    My question is how can I configure the mode button on the touch pad settings? Even if I was able to start a program by using the 3 buttons how can I modify these programs?

    Thanks for your help!

    p.s. I read the extended version of the manual for my laptop. There is no explanation of my problem - it says I should look "Synaptics Dual Mode Pad properties.

    I don't know where are these properties.

    Hello

    It s is not so difficult as you think, the properties of the synaptics are in the "mouse properties" of your "Control Panel" of windows. When you reach the 'mouse', then click on the "Advanced" tab and you should find a button 'Advanced functionality settings'.
    It could be that the button is not named as mine, but it must be identical.
    After clicking on it, you should look for this 'easy' Launcher in one of the tabs.

    I think that you will make it, but I'd like some feedback from you.

    Welcome them

  • How can I configure the vidio is dark?

    How can I configure the vidio when I used it it was dark and I do not see a menu so I can't go to tools?

    Can someone help me?

  • How can I configure the double-click on a Magic Mouse 2 without the universal access icon?

    How can I configure the double-click on a Magic Mouse 2 without the universal access icon?

    --> Mouse system preferences.

  • How can I configure the folder in which a movie TS file stores the report?

    How can I configure the folder in which a movie TS file stores the report?

    Thank you

    Too bad... I found it

    Thank you

  • How can I change the key of a lunch without losing the words in my karaoke VanBasco window when using cakewalk pro audio.

    Original title: Using cakewalk pro audio

    How can I change the key of a lunch without losing the words in my karaoke VanBasco window when using cakewalk pro audio. Can anyone help please

    Hello

    What operating system is installed on the computer?

    Contact Cakewalk for assistance:

    Here is the link: http://forum.cakewalk.com/default.aspx

  • Security log: How can I configure the journal required in a password?

    I have guests at home I don't want to have access to my computer. How can I configure the journal required in a password?

    Hello

    This should help:

    How to Make Windows 7 require a username and password with a Log on
    http://www.SevenForums.com/tutorials/61650-log-user-name-password.html

    If you later want to have auto login:

    How to automatically log on a user account to Windows 7 startup
    http://www.SevenForums.com/tutorials/377-log-automatically-startup.html

    How to automatically log on a user account in Windows 7
    http://pcsupport.about.com/od/Windows7/HT/auto-logon-Windows-7.htm

    I hope this helps.

  • Access to a specific registry key (HKEY_USERS\S-1-5-18\software\Microsoft) causes a BSOD. How can I fix the key?

    Original title: access to a specific registry key generates BSOD. How can I fix the key?

    Scans the registry in XP causes a BSOD. The wrong key is HKEY_USERS\S-1-5-18\software\Microsoft. Access to manually also causes a BSOD so I can't delete or export it. I do not have a restore point from before the problem started. Other than the access to that key or run a search, XP works well.
    Is it possible to fix this?

    Not having no not this error in my notes (in other words, I've not seen at least 2 times), I Googled it and first fell on a MS KB article:

    http://support.Microsoft.com/kb/810558

    This article includes this statement:

    Contact Microsoft Technical Support to help heal the corruption in the registry.

    I think that is where you are right now, so let's see what is the response of the Microsoft Support Engineer, now that there is more information.  I always love to see what they have to offer first.

    Why and how did you change the system restore to create restore Points 3 a day for 30 days (FYI - that is not the same as a backup).

    If you were to solve some problem at the time, what was the question?

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    In the meantime, I would run a chkdsk /r on your volume XP since XP Recovery Console.

    If you are not sure of the SP2 CD you have is an XP bootable installation CD authentic and not some kind of restore CD for the Dell system to 100%, I would recommend this (that I've seen more than 2 times):

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

    This is not the same as recovery disks that might have come with the acquisition of the system store.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:

    http://www.mediafire.com/?ueyyzfymmig

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

    http://www.ImgBurn.com/

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

  • I can read only half of my product key due to wear, but I need to reinstall xp on my hard drive again. How can I get the key?

    I can read only half of my product key due to wear, but I need to reinstall xp on my hard drive again. How can I get the key?

    If you can still boot your old disk, you can use a program such as one of them:

    KeyFinder: <> http://www.magicaljellybean.com/ >
    Belarc Advisor: <> http://www.belarc.com/free_download.html >

    to read the key out of your old system.

    Also note that if you have a system OEM and the OEM installation disks, the key can be incorporated in the installation discs and can not be necessary when your reinstalling Windows.

    HTH,
    JW

  • I did a restore of windows xp home 64 bit but did not reteive mny registry key. How can I get the key?

    I did a restore of windows xp home 64-bit but not recover my registry key.  How can I get the key?

    There is no such thing as Windows XP 64-bit Edition.  OEM machines are supposed to have a sticker with the product key on the computer somewhere.  You never did a full backup or an image of the disc on another drive?  If so, the key can be retrieved from the backup or image.

    John

  • How can I configure the WAG120N as a router only?

    How can I configure the WAG120N as a router only because I don't want to use it as a modem and router?

    I want to connect the WAG120N via a cable to a modem that will make the internet connection and only use the WAG120N like a wireless router.

    Thank you for your help.

    How to configure the WAN connection? Which requires your ISP?

    Shows the status page?

    You have a working internet connection with a public IP address if you connect your computer directly to the modem? It works with two different computers?

    If you have cable internet try to use the MAC address cloning feature and clone the MAC address of the computer that has an internet connection when it is connected directly to the modem.

  • I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

    I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

    http://pcsupport.about.com/od/windowsvista/HT/nvistapassword.htm

    Info on the link above will help you.

    http://au.Dummies.com/how-to/content/set-up-passwords-in-Windows-Vista.html

    More info on including a password reset disc info.

    See you soon. Mick Murphy - Microsoft partner

  • How can I configure the "hand-selection-Tool" (hand-tool) as a default setting in Acrobat Reader ms?

    How can I configure the "hand-selection-Tool" (hand-tool) as a default setting in Acrobat Reader ms? I'm tired of change each time I open a pdf file...

    Hi M S.

    Could you please let us know the version of the OS on your system?

    Also please refer to this article:hand lack of tool (Installation & updates)

    Let us know if this helps,

    Concerning

    Sarojini

  • I have lost the key code for my Adobe Acrobat Standard for Windows (CD) XI.  I had at my office and need to reinstall.  How can I get the key code?

    I have lost the key code for my Adobe Acrobat Standard for Windows (CD) XI.  I had at my office and need to reinstall.  How can I get the key code?

    There is a number on the CD.  Is it possible to contact Adobe and get the key code for this product?

    Hello

    Please check the help below document:

    Quickly find your serial number

    In the case of the volume license product, please visit: site Web of Adobe License | Serial numbers | Orders | Accounts

    Kind regards

    Sheena

  • How can I configure the element with the script names?

    Could Hello someone give me a hand?

    I created symbols on the stage of this script below.

    ------------------------------------------------------

    for (k = 0; k < 5; k ++) {}

    sym.createChildSymbol ("mySymB", "Stage");

    }

    ------------------------------------------------------

    How can I configure the element with the script names?

    Because, when I try to control a symbol by using the getSymbol("---") command.

    I need to know the name of the item given to each symbol.

    Concerning

    Yes, you're right.

    Using 'Code-Example' If you write sym.getSymbol ("mySymB") that edge returns the undefined value.

    With "Drag-and-drop-Example", you can use sym.getChildSymbols ().

Maybe you are looking for