How can I connect to a computer to use on another

Similar Questions

• How can I connect to a computer witch works on win 3.1.1 from a xp computer. 3.1.1 victory has only Board of LAN and a Perrine.

  How can I connect to a computer witch works on win 3.1.1 from a xp computer. 3.1.1 victory has only Board of LAN and a Perrine. No update is possible at the victory of 3.1.1

  Hi george!

  3.1.1 Windows is no longer supported by Microsoft.

• How can I connect to iTunes that it used to work now it isn't

  How can I connect to iTunes that it used to work now it isn't

  When happens when you connect the iPod to your computer running iTunes?  You say it does not appear in iTunes at all?

  Look at the screen of the iPod when you connect it to the USB port on the computer?  He said not 'connected' or 'do not disconnect' or give another indication of a data connection?  Or is it just to show battery charge symbol?  Or not it reacts at all to be connected?

  Your computer is equipped with a Mac or a Windows PC iTunes?  If Windows, which free?

• I can't connect to the computer by using the password.

  Original title: windows 7 locked out after several incorrect attempts

  I can't connect to my computer toshiba satellite laptop after that my friend unsucessfully tried to guess my password. Now my password is not recognized and I couldn't connect to my own laptop... I have Windows 7 Home premium. I don't have a recovery disk or something like that. Help, please

  Thanks for the reply! The message I see is: "the user name or password is incorrect."

  I don't think that my password has been changed. I say this because I was the only person who knew the password. Thanks again for your help!

  If Windows says your password is incorrect, then your password is incorrect. Otherwise, he would say "locked." Here's how to get out of your situation. In light of your statement "I have a recovery disk or something like that." , you must pay close attention to step 8 unless you like taking big risks.

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before your problems began.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

  If you do not have a CD to repair Windows (which is also essential to solve the problems of Windows as a pneumatic Jack is to change a tyre) then here are your options:
  • Burn it on another computer. It takes only three minutes!
  • Borrow one from a friend.
  • Purchase one here: http://systemdiscs.com/

• How can I connect to the computer without the icon?

  Original title: Inadverdently deleted the icon for the administrator who has passed, can recover us it and password?

  Mother-in-law belonging to this computer and we do not have access to administrator... we may have found the password but have removed the icon and cannot locate the account to connect?  Is there hope for us?

  Once connected to your computer, bring up a command prompt window...
  Start-> Run-> "cmd".
  and enter the command:
  net localgroup administrators
  This will give you a list of users of your system with administrator privileges.  Once you know the user name, restart your machine or logoff to access your logon screen.  Then press Ctrl-Alt-Del twice to bring up a classic logon window.  Enter the administrator user name, then the password.  If everything is copacetic, it will record you as an administrator.

  HTH,
  JW

• How can I connect to the computer without knowing the administrator password?

  Original title: I forgot the password for windows.

  Can not enter into the computer and did not have a recovery disk... Help!

  Keep passwords secure - Microsoft on passwords strategy
  http://support.Microsoft.com/kb/189126

  What to do if you forget your Windows password:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

• How can I connect to my windows vm using rdp?

  I have a vm windows 8.1 running on fusion 8.1 for mac.

  I want to connect from a different program vnc or office remotely.

  I went in the machine virtual windows 8.1 and did this:

  System Properties dialog box, under Remote Desktop, click allow connections to this computer remotely .

  Nothing works so far and I tried all the tutorials.

  My mac is not shared.

  I go to advanced in the Toolbox icon vmware for the virtual machine and click the box for remote sharing and the value of the port 5900.

  In my rdp, I put the address is the address of my router (the IP address I'd find when using whatsmyip.com.

  I launch rdp and don't get any link try the address by itself and address to: 5900

  I also tried this port open tools control Open Port check tool to check if port 5900 is open and it is not.

  I also put mac and firewall security to allow the merger of vmware accept incoming data

  I also disabled windows 8.1 Firewall

  I can't find detailed instructions beyond what I already tried on the vmware Web site or other sites.

  Can someone explain why it does not work?

  I prefer to use rdp on a windows machine to access the virtual machine.

  Unfortunately, you are confused between the different ways that you can remotely control and manage your Windows VM. You tried two different approaches at the same time. Here are three solutions:

  1. complete control Mac

  Use the Apple Remote Desktop or screen Apple shares to control your remote Mac and run everything you want, including VMware Fusion. Launch and run your virtual machines from VMware Fusion on the remote Mac that control you.

  2 use the built-in VNC server of VMware

  VMware Fusion provides a built-in VNC server that provides any running virtual machine remote control. That's what you were trying to redo settings, advanced, remote VNC (port 5900) display. It is a "generic" solution, which allows to remotely control a virtual machine, including invited where operating systems the remote control is not taken in charge or difficult to configure. In general, VNC is slow and not sure, and I would choose this solution if other options are not available.

  3. connect directly to the remote Windows running on your Machine desktop virtual Windows

  Your Windows virtual machine supports Windows Remote Desktop. That's what you were trying to do when you have enabled remote desktop in the System Properties dialog box on your Windows 8.1 virtual machine. With this solution, you control the VM Guest Windows directly. You only control the VM of Windows, as if it were a real physical computer somewhere.

  I highly recommend that you choose the solution number 3. That's what I do. I connect to several remote Windows Internet virtual machines. I run Microsoft Remote Desktop on my Mac to connect to them. I know it can work for you.

  Tips for configuring Windows Remote Desktop from the windows virtual machine

  * You do not have to configure anything on the Advanced page of VMware.

  That I would take a step at a time:

  1. Firstly, you connect to your Windows virtual machine from the local network.

  * In VMware Fusion, configure your Windows virtual machine for use in network bridge. Settings-> network card-> Autodetect.

  In windows, configure the Windows virtual machine with a static IP address on your local network. Search for "IP address static Windows 8.1.

  ATTENTION: Choose an IP address that is not in the DHCP address range (usually provided by your router).

  * Tip: With bridged networking, the Windows virtual machine is independent of the firewall of the Mac. Configure the firewall of the Mac to protect the Mac and configure the Windows Firewall to protect the Windows virtual machine.

  In windows, network test - make sure you can get out to the Internet.

  * On the same local network, connect a computer (Mac or Windows) to the local network.

  * Use Microsoft Remote Desktop from a Mac or Windows Remote Desktop on a Windows computer to connect to the VM of Windows to the IP address that is assigned. You can get Microsoft Remote Desktop, for free on the Apple App Store.

  Default port for the remote desktop on your Windows virtual machine will be 3389.

  If this does not work, then start troubleshooting the problems on the LAN. Don't waste your time on the router if you can't control the virtual machine Windows of your internal network. You can test the Windows virtual machine to the internal IP assigned from the internal network?

  2. do you need to connect to your Windows virtual machine, Internet?

  * Think twice. Are you sure you know what you are doing?

  * Now that you have connected to your virtual machine Windows on your network, the rest of the book is to configure your router.

  * Setting "port forwarding" on your router. It is sometimes called "the port mapping:

  -This will open the corresponding path to your router and redirect entry to the IP address of your Windows virtual machine. The default port for Windows Remote Desktop is 3389, but see the warnings below.

  The procedure varies depending on which router you have. It also has serious security implications. An attacker who can enter your machine virtual Windows can use it to attack other systems on your internal network. You can ask a friend to help secure your system.

  VERY IMPORTANT: once you open port 3389 on your router, the attackers will be noticed and attack your Windows virtual machine. Make sure that you have strong passwords on your Windows virtual machine.

  ->, I would choose another random port (that is, between 25000 and 45000 side public (Internet) of your router and map it on port 3389 on the side the router's internal network.) Mapping from one port to another internal port can be difficult to understand, but almost all routers support it. It's "security by obscurity" (not good), but it stops at most of the stupid attacks.

  * Test the local library or McDonald's or Starbucks.

  Good luck!

• How can we replace Oracle form when you used by another user

  Hi Experts,

  Is it possible to replace Oracle form while in use by another user?

  Some time need deliver urgent fixes on the production environment, but it must wait for downtime, and the form does not use.

  I searched the Forum, but able to get the answer to this topic, I will be grateful if you could provide no alternative to do this.

  Env:

  Windows Server 2008 R2

  WebLogic Server 10.3.5

  Oracle form & report 11.1.2

  Hello

  For Production environment, it will be handled with tactics that led to minor maintenance work as well.

  You must have two physical directories (real and temporary) including the same fmx/plx/pll/mmx, files etc.

  and a file reference of in the FORMS_PATH in default.env, who have the latest version of the source.

  Copy the last source file into a temporary directory, when the user take the new session, it will access the new version of the source of the temporary path and who obviously last source version.

  Meanwhile, once the actual source published by the user version, you can copy the latest version of the source to the real directory and reset the FORMS_PATH with the actual path.

  In this way, you can solve your problem.

• How can I connect to the computer after you forget the administrator password?

  Original title: LOST the PAST ADMINISTRATOR password; HELP PLEASE; I TRIED TO SOLVE THIS PROBLEM FOR 6 MONTHS!

  I deleted my account on my Windows Vista computer. I'm the only user, so I kept my user account and that you have access to my PC. Now that I can't make changes because I forgot the administrator password which CONTROL local USER ask me enter to proceed? How to recover lost administrator password or make a new one?

  Microsoft's strategy concerning lost or forgotten passwords
  http://support.Microsoft.com/kb/189126

• How can I connect to a computer of vesta on the network?

  all the computers runing 7 connect to each outher none can conect to box computer said vesta must have permission

  Create a folder on vista and then share it. Make sure that the option share password is disabled. Make sure that the discovery is on. If you have installed a separate firewall, it must be set up. Also, make sure that all computers have the same workgroup name

• How can I connect to the computer without the administrator password?

  Original title: my daughter locked her computer and can't remember the password.

  My daughter has locked her computer and can't remember the password. I'm trying to unlock the computer. The computer is running Windows 7

  It is always ask a password :(

  You did not say it, but it probably means that your daughter has changed her password and can not remember what she changed. This is why an alternative admin account is absolutely essential. You can get out of this situation as follows:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before you changed the password.

  And since you probably do not burn a CD to repair Windows 7 either (which is absolutely essential for people to maintain their own PC), here's how to get one:
  • Burn it on another computer.
  • Borrow one from a friend.
  • Purchase one here: http://systemdiscs.com/

  It takes only three minutes to burn a via the control panel / backup and restore.

• How can I connect to a computer without knowing the password to default?

  Original title: what is the default password / restored for samsung i5, intel, windows 7?

  I bought a returned a Samsung i5, intel, windows 7, 500 GB, 4 cores.  The guy who initially was sold in October 2012 has decided he wanted more bells/whistles and a system w / Windows 8 (which I despise him!).  He should not have used it very long because it was still covered in a film of plastic on the cover of the keyboard and all the cables.

  Problem is... when the laptop has been restored to factory default, they don't tell me what is the default password.  I can't lock my computer without the default password...

  Anyone know how to understand it?

  THX!

  ~ Iamdrchic

  Problem is... when the laptop has been restored to factory default, they don't tell me what is the default password.  I can't lock my computer without the default password...

  When a machine is restored to the State of the plant and then you are prompted to select your own account name and password. If you are challenged for a password, then the machine is not in "Factory condition" and you must perform a new factory restore.

• How can I connect to my computer wireless mouse

  I need to plug in a mouse on my computer n it must be done through my bluetooth on my laptop

  Buy a Bluetooth mouse and connect it according to the instructions that come with the mouse.

  "taz90-09" wrote in the new message: * e-mail address is removed from the privacy... *

  I need to plug in a mouse on my computer n it must be done through my bluetooth on my laptop

• How can I connect to the computer after you forget the password?

  Original title: HELP! WINDOWS 7 NETBOOK PASSWORD FORGOTTEN?

  I am unable to long on my netbook. I read through the posting a lot without results.  I tried to restart in SafeMode (networking), (command prompt) and I'm at my wits end. Need help quickly...

  Restart the computer using safe mode, and then log in as administrator. The password is often left blank. You can now set the password for all or part of other users. The next thing is to plan ahead: click Start / Help, then search for help on "password". Follow the instructions to create a key on your USB flash drive file so that you'll never find yourself in this uncomfortable situation.
  _________________________

  If this answer solves your problem, please click "Propose as answer" so that the thread can be closed. Thank you.

• How can I connect to the computer after I lost the password of the administrator account?

  Original title: lost password windows - no disk drive

  I wrote above all forget my windows password

  the problem is that my laptop is a little, I don't have a disk drive or a recovery disc

  Hello

  Welcome to the Microsoft community.

  I suggest you for the link and check if that helps:

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  If your computer came preinstalled with the Windows operating system, I suggest contacting the manufacturer of the system and check if it helps.