How can I connect to the internet? Problems involving the network and sharing Center does not.

Similar Questions

• Problem with wireless - Vista Network and Sharing Center does not recognize my connection!

  I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.

  Hello

  Method 1:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can also view the related items for more information.
  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Method 3:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  See also:

  Connect to a network with Windows Vista wireless

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

• How to activate the Internet connection on the network and sharing Center.

  

  I clicked on disable when I opened it. I tried to find a solution to this, but I can't find anywhere on the web. Please, help me difficulty find my internet connection. I'd really appreciate it. It's windows 7.

  OT: I accidentally disabled the internet connection by going to network and sharing Center

  Thank you.

  Hello
  I suggest you to run the network troubleshooter utility.

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also the link: wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Post us the results after trying the steps above.

• Unable to connect to the network and wireless interface does not appear in ipconfig/all on Vista32

  My niece has a laptop of HP under vista32 who cannot access the network wirelessly or wired.  She is in College and needs the laptop on the network as soon as possible for his class work.  I tried to reload the driver wireless driver (Atheros AR5007 b/g) and reset the tcp/ip stack using the command netsh addressed in the microsoft article, but nothing works.

  I brought the laptop to work where we have an unsecured wireless lan (called comments) for visitors and the laptop can go out and find all points of access wireless including comments.  When I select the comments and try to connect it times out and tells me to watch driver and tcp/ip connections.

  Another clue may be that the wireless card does not appear when I type ' ipconfig/all', or the adapter wireless and wired adapters are not displayed:

  C:\Users\Admin>ipconfig/all

  Windows IP configuration

  Name of the host...: Hannah-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Bluetooth network connection Ethernet card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Device Bluetooth (personal area network)
  Physical address.... : 00-21-86-39-EE-22
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  C:\Users\Admin >

  I'd appreciate any help I can get.

  Thank you!

  In the case where somone has this same question, I wanted to post my final resolution of the problem. I backed up its data and restored the laptop to factory default using HP restore and now everything works fine.  Better I would say loading Zone Alarm on Vista was a bad thing for my niece to do.  Would have been nice to find a magical solution to avoid restoring but never found one.  Even after the alarm zone using their instructions by removing completely, there was apparently a problem with the registry who wouldn't let networks are working properly.  One thing I noticed after that the restoration was the HP Wireless Assistant poped up and told me about available networks, etc.  Assistant wireless didn't pop-up at all whne the cell was dismantled so maybe assistant was broken?  Well, I'm out...

• Network and sharing Center will not be open in the Panel

  I've been away from home - where I HSI and it works very well - for a few months, I plugged to the network sporadically awireless (sometimes just bad signal), with a lot of frustration.  A few days ago, I went to a place where I could connect to a hard (secure) wireless network and enjoyed the smooth navigation for about an hour.  Later when I tried to connect to the smaller network, unsecure, I couldn't open my network and sharing Center. Whether from the drawer or the Control Panel, a screen opens displaying nothing, but the circle of rotation.  The TASK MANAGER IS REQUIRED to CLOSE THE PAGE - it will not answer the close box. TM shows the centre network and sharing as 'running', although there is no indication on the screen, except the title and the circle of rotation.

  My laptop is a dv6t Pavilion with Windows 7 (64-bit)

  All the other files in the Panel seem to open and operate normally.

  Hello Hamanslayer

  Thanks for posting on the HP Forums!

  I understand the network and sharing Center will not be open. I will do my best to help you! If please launch and center network and sharing, and wait for him so that he can provide an error. In addition, please try to run Centre network and sharing in a different user account. If you don't have one, create one.

  I did some research on this issue. Unfortunately, the only reliable troubleshooting that is remaining, if the above does not help, is to reinstall the operating system. Too, there are different issues that could be causing it. Reinstalling the operating system will focus on each of them.

  First, please save all the files you need. You can find specific steps on how to proceed in the following HP document: backup of files (Windows 7)

  Once this is done, you can safely reinstall the operating system. I'll also give you a document on how to do it: perform a recovery of the system (Windows 7) HP

  Please let me know your results. Thanks again for the display on the HP Forums. Have a great day!

  Mario

• Virtual WiFi not presentation, it disappears from the network and sharing Center.

  Original title: Virtual WiFi not presentation

  Hello

  I created Virtual Wi Fi cmd (netsh wlan), first it was created and posted his icon in the network and sharing Center, after that show how I disabled it from the network and sharing Center by clicking on the icon and pressing the button disable I pressed off it disappear from the network and sharing Center.

  Can someone help how to activate it so that I see her back icon in network and sharing Center.

  Thank you

  Hello

  You have virtual map of Wi - Fi enabled in Device Manager?

  This problem may occur if network settings are changed.

  You try to run the following command check if it helps.

  a. press on the key Windows + X.

  b. click on (Admin) command prompt.

  c. type the command netsh wlan start hostednetwork and press on Enter.

  If the problem persists, I recommend posting your query in the TechNet Forums to get help:

  8.1 Windows networking forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Network and sharing Center shows not connected, but the computer is connected to the wireless network

  When I open the network and sharing Center, or hold my mouse pointer on the icon of internet connection in the bottom right of the taskbar, it shows that I'm not connected to a network. However, I know that I'm connected to the internet. My internet and e-mail work correctly. Also, when I click on the 'Connect to a network' option, find the list of available wireless networks, and it shows that I'm connected to my home network. How can I make Windows everywhere where I am connected to the internet, instead of recognizing only on the list of the networks without wire-available?

  Had exactly the same problem on Windows 7 (win7). Connected to the Internet but the status showing no connection and a red cross on the network icon. Problem has also caused problems to connect to Lync and Office365 along with VPN, which apparently uses the status to check whether the connection is available.

  Found the solution here: http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/df17c593-e78f-4878-97b0-7569307934c5

  Apparently, certain permissions gets hurt in the database record and must be fixed using RegEdit. The solution is a step by step and likely to be resolved simply by removing a cache of file using RegEdit and potentially affecting certain permissions.

  It will be useful.

• Unknown error in the network and sharing Center

  When I opened my network and sharing Center where the active networks would be just said

  'Unknown '.

  and

  "The account specified for this service is different from the account specified for other services running in the same process"

  If I open Services.msc and check the list of networks and Network Location Awareness service, both are on automatic and both connect as a network Service.

  Network list service does not work and does not give the error:

  Error 1079: The account specified for this service is different from the account specified for other services running in the same process

  I'm connected to my home network and have internet access and also a local access to other computers, it's just not appearing is not on the network and sharing Center.

  A result of this is that some of the metro apps don't report any internet connection and will not start. I currently now disconnected my microsoft account on the computer and use a local account, but the problem is still there.

  I also tried

  netsh winsock reset

  from an administrator command prompt but no change.

  Can anyone help?

  Hi Andrea,

  Please keep us updated.

  This can be shown because of missing or corrupted system files. This is why I would recommend running the System File Checker tool, which is a Windows utility that allows users to find corruptions in Windows system files and restore corrupted files.

  To do this, click Start, type command or cmd prompt in the Search box, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  At the command prompt, type the following command and press ENTER:

  sfc/scannow

  Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

  I hope this helps. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• When I create an ad hoc network on my laptop HP using Win7, I find in the 'manage wireless networks' (in the network and sharing Center)

  Hello, when I create an ad hoc network on my laptop HP using Win7,

  I can't find it in the 'manage wireless networks' (in the network and sharing Center)
  can you help me please?

  Hello

  In case there are problems with your computer or it network devices check
  with HP, their documentation online support and drivers, diagnostics, and
  Ask problems known in their forums.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ==========================================

  The routers are much easier and they don't cost much.

  These should help:

  References to Vista also apply to Windows 7.

  Set up a computer-to-computer (ad hoc) network
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad hoc networking - how the network with the funny name can make your life easier
  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

  How to build a wireless network without using a router at wide band (also Windows 7)
  http://www.hardwaresecrets.com/article/how-to-build-a-wireless-network-without-using-a-broadband-router/418

  Build a Wireless Home network without a router (also Windows 7)
  http://www.labnol.org/software/wireless-network-without-router/11494/

  How to share files and printers on your network
  http://www.hardwaresecrets.com/article/how-to-share-folders-and-printers-on-your-network/247

  -------------------------------------------------------------------------

  Other solutions include the use of these that turn your WiFi PC into a virtual router
  instead of using the ad hoc network.

  Connectify
  http://www.Connectify.me/

  Virtual router
  http://virtualrouter.codeplex.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Cannot turn off or disable password protected sharing the network and sharing Center

  I'm trying to turn some pretty simple sharing of files between our windows PC (two portable minicomputers running under XP, a desk and a laptop running vista). File sharing functions between the XP computers. However, I am simply unable to influence the "password protected sharing setting" in the network and sharing Center. I check the option to turn it off and I get a click through UAC dialog window, the mouse cursor turns for a short time while as if windows is pretending to do something, but the password protected sharing setting is always on.

  I tried to disable Avira Antivir.

  I enabled the guest account and set its password to a string explicitly empty with net user guest «»

  Nothing helps.

  svampi,
  This knowledge base article can be useful for you.  Although the problem that it is designed for the difficulty is not the same as yours, the underlying cause is the same.  There is an article to 'fix', which means that you can click the 'fix' in the article so that it automatically fixed for you online or you can follow the instructions to edit the registry yourself if you feel capable of doing that.  So check that out and see if it helps with your problem:

  http://support.Microsoft.com/kb/947232

  Let us know if this can help, or if you still need help.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• restore service dependency for the network and sharing Center

  How to restore the dependency service or group who couldn't start for network and sharing Center?

  Hi patto1708,

  If it was something that was already previously and failed after certain activities on the computer for which you are not aware of, then the best possible thing to do is run a system restore. This will ensure that your computer is back to operational status.

  For more information about the system restore, you can see the link: http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions

  Or you may need to check for the dependency of the network and sharing center services and start them manually when they are stopped manually.

  See the link: http://windows.microsoft.com/en-US/windows-vista/Manage-services-in-Windows-Vista-from-Windows-Vista-Inside-Out to learn more about how to manage services in Windows Vista

  Kind regards

  SAP U G - Microsoft Support

• No network adapter is displayed in the network and sharing Center

  My internet connection works very well through a router, but if I go to the network and sharing Center and click on change adapter settings, I get a blank page.
  The adapter appears in Device Manager and it is used by the computer as disabling it kills the internet connection.
  I think that's the reason that I have a network with a red X icon. The ToolTip that appears when the mouse passes over the icon said access to the Internet.
  What would cause the network to do not "see" the adapter, even if it's to use?
  The adapter is a Netgear GA311 gigabit and compatibile with Windows 7.

  Have you installed the drivers of www.netgear.com?

• I'm trying to set up an Ad Hoc network, but there is no option for the Ad Hoc network configuration when I go into the network and sharing Center.

  I looked at how to make a point of my computer because I have a usb wireless internet device for my laptop and I tried to get an ad hoc network setup but there is NO option for the CONFIGURATION of the NETWORK AD HOC when I go to network and sharing Center... what should I do?

  original title: ad hoc isn't here...

  Hi NickBean2,

  You can refer to the following articles and see if it helps.

  Set up a computer-to-computer (ad hoc) network
  Solve problems, find wireless networks

  Hope this information is useful.

• While error blue screen that clicked on the network and sharing Center icon

  whenever I click on network and sharing Center icon I got blue screen error and restarted p.

  Here are the event logs and sys inf.

  http://1drv.Ms/1tq4Y9M

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 00000005
  BCP2: 8530801C
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  SG

  There is evidence that this is caused by malicious software.  I would like to launch malwarbytes to eliminate this possibility

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

  If this comes back clean then it is related to the material, and because the DMP files mention Genuine Intel I ran the cpu stress test first.

  Try this free stress test: http://www.mersenne.org/freesoft/

  Prime95 Setup program;
  -Extract the contents of the zip file into a directory of your choice
  -Double-click on the executable file
  -Select "all stress testing.
  -Select the test of 'Blend '.  If you have already run MemTest overnight, you can run the test of "Small FFFS" instead.
  "Number of threads of torture test run" must equal the number of processors multiplied by 2 (if you use hyperthreading).
  The best way to do this is to go to the Manager of the tasks of the figure... The performance tab - and see the number of boxes that appear under the CPU usage history
  Then run the test of 6 to 24 hours - or until you get errors [b](whichever comes first)
  The selection of Test and the file stress.txt box describes the components that insists on the program.

  Stop 0 x 124 is a hardware error

  If you are overclocking try to reset your settings to standard processor and see if that helps.

  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions and clear CMOS.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).

  
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

  
  
  More advanced reading can be found here from a MS MVP IT PRO
  http://captaindbg.com/bug-check-0x124-whea_uncorrectable_error-how-to-troubleshoot/

• Windows 7 64 bit... ""? "shows"See the whole map"in the network and sharing Center window"

  Hi guys

  I've been struggling with this problem for a few weeks and need help. When I open the control panel; Network and Internet; "Network and sharing Center", at the top of the page to the right, I have an option to view the connections of the network (see map). The opening I find a big blue '? ', with 2 solid lines from my computers to the "?", with the word "Unknown"under the present'?", then 2 solid lines go to the router... It's a wireless network must therefore a double line broken and not solid and obviously not '? I can fix this problem by changing the Properties tab 'Advanced' from the WiFi transceiver on each of the computers. Once I click OK, the computer the fact thing... and the blue "?" disappears and the network is 100% functional. Putting computers into sleep or restart... and I have the '? ' on the respective computer which itself was removed from the network after a reboot. This happens on 4 computers on the network, all the Windows 7 64-bit, 2 notebooks, desktop computer 2!... Still problem, all corrected in the same way. Until the '? ' is corrected I show other computers in our network at the bottom of the window under the label:-"the following peripheral discovered may not be placed in the plan.» Click here, etc. etc. Once all 4 computers are patched, I show a perfectly displayed network... I'm open to any ideas... Thank you

  The question mark appears when you return from sleep if interconnect them (Network Interface Controller) is allowed to turn off to save power.
  This can be disabled if you wish