How can I control cleaning print head automatically each time my Officejet Pro 8500 a Premium starts?

Similar Questions

• Cleanin print heads all the time on Officejet Pro 8500 has.

  Whenever I turn it on (once per day, it cleans the print heads and it drains ink. How can I stop this?

  The information I've provided assistance?  If so, you will mark this post as solved.

  Thank you

• How can I get the read head to return to the location, it's immediately before starting playback. This used to be a preference but I don't find it in the latest version of logic.

  How can I get the read head to return to the location, it's immediately before starting playback. This used to be a preference but I don't find it in the latest version of logic. What I want to do is; Once playback is stopped the playhead returns to the previous starting position. Where is the setting for this? Is it still an option that I can find nothing in the online help.

  Hi there, don't you mean this one?

  

  Good day!

• HP Officejet Pro 8500 a Premium: print head

  I have a HP Officejet Pro 8500 a Premium e-all-in-one printer - A910n printer on a home network.

  I have known printing issues that point to a printhead problem; but I don't know where.  I lined up and cleaned the print heads HP Print & Scan doctor and the console on the printer.  No luck; My test pages shows the black and magenta blocks, but not blocks cyan or yellow.

  I printed the console power-on self-test diagnostic page; and, he pointed out that the status of printhead is good for the two print heads.

  If I have to replace a print head, I don't know what printhead to replace.  Of what I have posted. It sounds like black/yellow or magenta/cyan failed; or do I have another problem?

  Thank you!

  Thislink offers Fig. printhead problems.

• I have a HP Officejet Pro 8500 a Premium e-all-in-one printer - A910n.

  I have a HP Officejet Pro 8500 a Premium e-all-in-one printer - A910n.  I'm trying to Connect HP series, but every time I create and account it tell me to log in using my password of Snapfish.  When I use my password for Snapfish "valid", it comes to request return "invalid password".  How can I fix it?

  If I'm not on the correct Board, please let me know which one I should use.

  Thank you

  Hello. You're on the good advice!  Unfortunately for correcting the offset account problem you meet you share personal information.  To protect your identity and your account security, I will private message you with what HP will need to get your accounts connected HP/Snapfish synchronized upward in order to use web services.

  Thank you!

• HP Officejet Pro 8500 a Premium: HP Officejet Pro 8500 a Premium does not print the docs of the computer, but will display a test page.

  HP Officejet Pro 8500 a Premium does not print the docs of the computer, but will display a test page.  I constantly get a message that the computer cannot communicate with the printer.   Not only it will be not be printed docs, it will not print web pages using 11 IE or Google Chrome.

  I used print and Scan of doctor, he always reports there are no questions and print page one same test so I can not print anything else.

  Whenever I want to print, I have to restart the computer.  After the reboot, I have a chance to print.   This problem started on February 15, 2015.

  My operating system is Windows 8.1.   I have unintalled HP, rebooted, and then reinstalled the software software:

  OJ8500_A910_1315 - 1.exe

  HP Print and Scan - HPPSdr.exe doctor

  HPSupportSolutionsFramework - 11.51.0049.msi

  All versions were last uploaded on 4 April 2015.

  I have a home wireless network (router Ubee DDW366).  All other devices in the House will be printed on the printer of 8500 has no problems: 2 Toshiba laptops, 2 Android phones and 1FireHD.

  The desk top is installed with a network card Netgear, I don't know the model, but I had it tested by a PC technology to verify that the card works.   The card and 8.1 of Windows have been installed on January 3, 2015.

  I have run virus scans and analyzes malware.  Whenever they show that there are no problems with my desktop computer.  What kind of desktop? Specially designed for my listing of... without brand computer parts store.  ASUS motherboard P6X580 Premium.  Now I will probably get hacked!

  I'm at my wits end.  And it's frustrating when I need to print something and the system hangs.  I often use screen printing to a word document to save in order to restart... but then I lose all sorts of features when I pick up what I needed.  It is also a time consuming.

  This printer we served well for two years and I have expensive cartridges pending; another two cycles of recharge.

  Help?

  Addendum: can I scan with the HP printer help.  I open the HP printer assistant, he "gets" the printer information, then I select "scan a document or photo" and the printer answers.   I have no problem with the sweep.

  It has been awhile, but I played on something you wrote.  "There could be a software conflict with the HP software" everything worked very well... impression was shifted at best; just didn't know if it would work.  So I would eliminate a program, reboot clean, try to print, and then reinstall the software.  I finally found the culprit.  I had a program running in the background, occasionally.  When it ran, HP does not print.  Stop the program and I was able to print... Do not have a problem since I found it... I do not say that it was a software to share files... so I replaced since this program with something else that doesn't cause problems...  It took a long time and I couldn't work the question every day.... but I can say that I have problems printing for the past 5 days!  I can print with confidence.

• OfficeJet Pro 8500 a Premium: my printer driver has changed and it's HORRIBLE

  I have been using my HP 8500 a all-in-one with a few years now with no problem.  Day before yesterday, I met a problem: when I tried to specify certain pages of a document to print, I get an error message.  However, if I chose to print the entire document, it would print.  I assumed that my driver to be updated, so I downloaded from the HP website.  WHAT A HORRIBLE MISTAKE IT WAS.  My scanning utility has changed, I can only print even when I choose to print an entire document.  I can't print at all in an Excel worksheet.  I tried uninstalling the driver and re-install.  I DON'T want to network this printer, but now whenever I have try to reinstall the driver, I can choose to connect via USB, but on the pop - up next, it does not give me the option to proceed.  It gives me the possibility to 'come back' or 'jumps' USB connection.

  What the hell is happening?

  Hi @LMKos,

  Welcome to the HP community!

  I hope you have a pleasant experience here.

  I want to help you with driver/software problems that you are having with your HP Officejet Pro 8500 has e-all-in-one printer and your computer Windows 8.

  It seems that your software is may not be installed correctly, in addition to the common issue of 8.1 to Windows Installer automatically update Windows drivers.

  First of all, with the USB cable plugged in, we want to remove all instances of your printer in Device Manager (so when you plug the USB cable back in during the new installation, it will be seen as a new device).

  1. Open your start.
  2. Start typing 'This PC', it will come under results of research. Right-click on computer and select Manage.
  3. Click Device Manager on the left side.
  4. In the main part of the window, locate in the following categories for all HP entries: Bus USB controllers, printers, imaging devices and other devices.
  5. If you see your HP printer in one of these sections, right click and select Uninstall. Keep an eye out as well for all that said device unknown and let me know if you see this at all (these are also well uninstall).
  6. After have removed all entries of HP, unplug your USB key and leave it unplugged. Do not reconnect the USB until you are asked when reinstall us.

  Next we want to remove printers from the printers and devices folder.

  1. From your desktop, or drag from the right to open the bar of charms, or press Win key + C on your keyboard.
  2. Select settings in the bar on the right.
  3. Select Control Panel
  4. Under hardware and sound, select devices and printers
  5. Right click on each icon you see for your 8500 has (even if there is only one) and select remove an instrument, or delete.

  Once this done, allows to make a cleanboot from your computer (this turns off all non-essential startup programs, so if there is another program running that interferes with the installation we can avoid it).

  How to perform a clean boot in Windows

  Once the computer restarts, try to download the HP printer install wizard to complete the installation for you. It will automatically detect your device and install the appropriate software.

  Please reply to let me know if that solves the problem.

  Good luck!

  

• Printing DCP color red problem - HP Officejet Pro 8500 Wireless All - in - One Printer, the 4th copy

  I have a HP HP Officejet Pro 8500 Wireless all-in-One Printer and try to print 75 copies of a program for our event. After the first 5-6 pages the RED in my program starts to turn magenta. I have new HP ink cartridges and print on HP Color Injet paper. I have renectly replaced the Black/Yellow Printhead (at least 6 months ago). At the beginning when I cleaned the printheads, I was able to print 2 or 3 pages showing my color RED. Then back to magenta. When I received the images of test after you have cleaned the print heads, they are all perfect, no lines.

  What happens and how can I solve this problem?

  Hi TM1997,

  Thanks for the reply!

  Given that the printer seems to work for a bit and then comes back to the same question, it must be a problem with the printhead (Cyan/Magenta one) or the ink lines that go from the cartridges to print heads. First of all, I would suggest that you check the warranty date on your printhead C/M. If it is under warranty contact HP Technical Support in your area and inquire about a replacement, but if not, it's you if you want to replace the print head, printer service, or look into an upgrade.

  Have a great weekend!

• Unanswered: how to turn off the light touch screen with an HP Officejet Pro 8500 has?

  Hello

  I have a new HP Officejet Pro 8500 connected via WiFi and all A910g seems to work very well (after solving some Comodo firewall settings on the PC network).

  However, the light of the touchscreen is quite annoying when the screen is not necessary. Only a few times, I noticed the light went away, but I can't find an option to control that. Normally, the light just stay on (all night too) all by displaying commercial product tour. I really want this boring commercial to go and have a time-out to a black screen that opens again when they are hit. I can't imagine that the functionality is not yet there, but where?

  Kind regards

  -Charles

  Hello

  Post the rather unexpected answer myself.

  There is also an option of installation menu (in English). Tools | Screen saver.

  It is also an On / Off radio button.

  If you think setting the screen saver 'On' would be empty the screen after a timeout, you got it all wrong, as if I were.

  The screensaver is actually the commercial product tour rehearsal.

  The "Off" screen saver setting had the desired effect. "

  Kind regards

  -Charles

• OfficeJet Pro 8500 has Premium - problem with printing PDF documents

  My boss has the printer/HP Officejet Pro 8500 Premium has in his office. He had problems with the printing of PDF documents. As a general rule, what print is either unintelligible or will have a black line at the top of many pages, even if it's just a 1 page document. No problems printing on other types of documents, only the PDF files. Is it possible to fix this? Thank you!

  Try the following setting and let me know any changes:

  Adobe Reader, launch the dialogue of the printer.

  Click on Advanced Options at the bottom of the dialog box.

  Check the Print as Image checkmart.

  Click OK to approve and try to print

• 7520 photosmart all in one. How to disable auto clean print head

  I have the HP Photosmart 7520 and I am running Windows 7. How can I disable auto cleaning feature print head?

  Using function Thi my ink so that I am not the same impression.

  Hello

  To answer your question, unfortunately you can not disable this function where the print head will not clean itself. The printer is made to do to keep the printhead to collect ink on the inside contacts.

  I hope that answers your questions.

• I have a craving for 120th. How can I change my print head

  I have a desire and a printer of 120th.  How can I change the header information?  Thanks Bob

  Hello lvtastbob,

  Could you please draw on exactly what you want.

  As far as my knowledge is concerned on this printer, it has the ability to 'Header '.

  Header can be generated for applications such as MS Word etc.

• How can I get my printer spooler running I get error 1075 when I try to start it

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you see something like this:

  Cannot start service on Local computer print spooler.
  Error 1075: The dependency service does not exist or has been marked for deletion.

  Error 1075 means "ERROR_SERVICE_DEPENDENCY_DELETED".

  This means that there is some Service think that it depends on to start the Print Spooler Service that is missing.  It's maybe the printing or drivers that have been uninstalled software.

  If really, the dependency service exists and simply not work (dependence, Services must be started and running), you will get an error like this:

  Cannot start service on Local computer print spooler.
  Error 1068: The dependency service or group could start.

  You now or you already had all of the installed Lexmark printers?

  If the Service print spooler used to work well, do you have added or removed all printers since he worked?

  To view your Services, click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet.

  Highlight the Print Spooler Service, right-click and choose properties you can see what is happening.  You will be especially interested in the startup (generally set to automatic) type and the items listed in the Dependencies tab.

  Always print spooler Service usually depends on the remote procedure call (RPC) Service is running, so if the remote procedure call (RPC) Service is not running, find it in your Services, launch it and set the startup type to automatic.

  If the remote procedure call (RPC) Service is not listed as a dependency for the Print Spooler Service, you can add it.

  You must see what Services depends on your Print Spooler Service, and then restart them (and their startup type automatic value), or if you have the dependency Services listed for items that are more installed on your system, you must inform the print spooler that she needs more of them to start.  Registered Addiction Services that are no longer needed must be removed.

  For example, I said to my Print Spooler Service depends on the remote procedure call (RPC) Service, and also depends on the Service Jose (and of course there is no Jose service).

  When I try to start my Print Spooler Service, I get an error 1075.  It's logical.

  If I look at the Print Spooler Service properties Dependencies tab in the applet Services however, it does not list the Jose Service as a dependency, but if I query the Print Spooler Service broken from a command prompt, I can see what ir really depends on to start and it looks like this:

  [SC] GetServiceConfig SUCCESS

  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STARTUP TYPE: 2 AUTO_START
  ERROR_CONTROL: 1 NORMAL
  BINARY_PATH_NAME: C:\WINDOWS\system32\spoolsv.exe
  LOAD_ORDER_GROUP: SpoolerGroup
  TAG                               : 0
  Display_name: Print spooler
  DEPENDENCIES: rpcss
  Jose
  SERVICE_START_NAME: LocalSystem
         
  I need to delete the Service jose as a dependency for the Print Spooler Service (and leave just the rpcss Service), then the Print Spooler Service will start.

  If you don't see the problem in the Print Spooler service dependencies tab, see what are actually of a command prompt window Print Spooler Service dependencies.  To do this, click on start run and in the type box:

  cmd

  Click OK to open a command prompt window.

  In the command prompt window, query the spooler to print (spooler) Service by entering the following command:

  sc qc spooler

  Whatever it is listed under needs of DEPENDENCIES is running before starting the print spooler.

  If there are DEPENDENCIES listed for things that are more installed, you can fix it, but first of all, we need to know what is indicated, then we can remove the ones that are not needed.

  If you make adjustments, do not forget to restart your system and make sure that changes "stick".

  Do, or do not. There is no test.

  Someone please tell me how to make figgy pudding like these kids keep saying they won't until they get some.

  I decided to implement the points for a new puppy instead of a pony!

• OfficeJet Pro 8500 a Premium: How can I preset the trays used for printing and copying?

  I love this machine except for one thing. It takes the paper for printing from the lower drawer. So I used the top plate for single supply of envelopes. Then I'm going to copy something and it makes me put the paper in the upper tray, when the lower plate is full!

  How can I determine if just use paper in the lower tray for copying too?

  Hello

  You should change the copy settings to use the 2nd tray, then you can set it as default:

  1. Click the copy on the front panel of the printer.
  2. Click settings.
  3. Click Select status bar , and then select tray 2.

  You can set the default tray by selecting set as new defaults in the settings menu even.

  Shlomi

• How can I turn off What's New each time Firefox 4 begins

  I had to change my home page blank page, because every time I start Firefox 4, I get two tabs. One for my home page and the other for What's New

  http://www.Mozilla.com/en-us/Firefox/4.0.1/whatsnew/

  How can I disable this page open every time? Please write simple instructions if you know. Send me a link to change things does not work for me. Thank you.

  See the following for a few suggestions:

  • Firefox says it's just updated each time that it starts - how to fix
  • How to set homepage - Firefox supports several home pages separated by ' |' symbol
  • http://KB.mozillazine.org/Preferences_not_saved