How can I create a function using variables TestStand and call from Meadow step Expression?

In one sequence, I have dozens of prior Expressions, which are almost the same thing, like this...

Locals.tagID = (Parameters.singlePhaseEnabled? ('L': "D") & Str (Locals.phase) & "006".

.. and the only thing different is this three-digit string in the end ("006" may vary). How can I write a function that I can call from Meadow step Expression then it should look like this? ...

Locals.tagID = MyNewFunction("006")

You can not write custom expressions for commands.

That being said, there are two options:

  • Create a sous-suite with a single step. Use a setting of the sequence as "function parameter.

  • Create a step type custom including a lower level module that implements the function. Add a step edit to allow the user to the steptype graciously change the setting.

  • Store the variable setting in a local global variable / file and change the value in each step. This will, at least, keep the same 'function' for each step.

Norbert

Tags: NI Software

Similar Questions

  • How can I create a Windows using NOR-DAQmx application in Visual Studio 2010 64-bit

    Hello

    How can I create a Windows using NOR-DAQmx application in Visual Studio 2010 64-bit?

    I'm transferring a 32-bit application on 64-bit.  In visual Studio, I added the 64-bit project configuration.  He compiled the source very well but the reports link errors:

    error LNK2019: unresolved external symbol DAQmxReadAnalogF64 referenced in function NI6008_AnalogInput NI_6281\NI6281.obj
    error LNK2019: unresolved external symbol DAQmxCreateAIVoltageChan referenced in function NI6008_AnalogInput NI_6281\NI6281.obj
    error LNK2019: unresolved external symbol DAQmxReadDigitalLines referenced in function NI6008_DigitalInput NI_6281\NI6281.obj
    error LNK2019: unresolved external symbol DAQmxCreateDIChan referenced in function NI6008_DigitalInput NI_6281\NI6281.obj
    error LNK2019: unresolved external symbol DAQmxWriteDigitalLines referenced in function NI6008_DigitalOutput NI_6281\NI6281.obj
    error LNK2019: unresolved external symbol DAQmxCreateDOChan referenced in function NI6008_DigitalOutput NI_6281\NI6281.obj

    These, of course, are the functions OR that I use.  The NIDAQmx.lib has been added to the Input of the link property.

    Any help would be appreciated.

    Thank you

    -Neil shore

    Hi LaserShore,

    Think you that you added the 64-bit platform settings target according to this page? : http://zone.ni.com/reference/en-XX/help/372636F-01/mstudiowebhelp/html/64bitcore/

    Already running 32-bit application? Have you changed references to the 64-bit version?

    You use Measurement Studio? If so some features are not supported with 64 bit.

    Also when you say that you have added the NIDAQmx.lib, did you follow this KB:http://digital.ni.com/public.nsf/allkb/38F67B28D995C6958625706E000C580C

  • By using only the keyboard, how can I create an email using Outlook Express, have the files of "painting" in the body of the email

    original title: only the keyboard

    By using only the keyboard, how can I create an email using Outlook Express, have the files of 'paint' in the body of the email, also registered another Web page?

    Hi r. Gull,.

    You can view using Outlook Express keyboard shortcuts, documented in:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/mail_hotkeys.mspx?mfr=true

    I hope this helps.

  • How can I create a submenu using Muse

    How can I create a submenu with muse

    Hello

    Please see the following links:

    Submenu vertical

    Adobe - submenu - Muse submenu - Drop Down Menu - Navigation - YouTube

    Adobe Muse get started - adding a Navigation bar - YouTube

    Concerning

    Sonam

  • How can I create a full recovery for OS and preinstalled software media?

    Hello
    My son´s accompanying the new Satelite L855-10U preinstalled OS and much other software already installed on the HARD drive, but no installation media, the client is supposed to create a tool from Toshiba.

    I created 6 Swedish recovery for the operating system using the tools Toshiba had installed on the HARD drive.

    To do this 6 Swedish, I created with the Toshiba Recovery tool contain the operating system and all other preinstalled software?

    How can I create the installation media full and usable if not for the operating system and all other preinstalled software?

    I can´t find all the information on the backup software pre-installed with the exception of the BONE. Is there complete information how to do the above, in the manual of the computer, or have you missed this information?

    I would like to know how I can create media backup complete and usable for the operating system as well as for all other preinstalled software, so I can recreate all the facilities of the plant at a new disk if/when the original HARD disk crashes.

    Is there a partition hidden with pre-installed software, and if so, how can I create a backup of this partition, or all the software, so I can reinstall everything if the HARD drive fails, if it is already not with the Swedes 6 Toshiba tool created for me?

    Forward to your response and to complete your customer documentation about the complete instructions for installation and recovery media creation.

    Thank you very much!

    Baltazar

    Hello

    On this forum, you will find a lot of useful comments on the recovery image saved on the HARD drive and its operation to the facility and the creation of recovery disks.
    All this is clearly and simply.

    Front of Toshiba offer new people for laptop in software development create recovery image. This recovery image will be created for each laptop model (specific hardware configuration). Recovery image contains the operating system, all necessary drivers, tools/utilities Toshiba specific and some other software like DVD/Blu-Ray, Microsoft Office test drive and the antivirus application. With this configuration every laptop owner can begin to use the laptop without having to install important applications.

    This package is then saved on the HARD drive and can be used for the installation of HARD drive recovery - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm. In other words, if something is wrong with HARD drive recovery facility you can reset the preinstalled operating system and reinstall recovery imae. After that make you have absolute same settings you had after purchase and first start of the laptop.
    HARD drive recovery image can not be used if:
    -HARD drive is defective
    -you have installed the version of the own BONE
    Structure of the HARD disk partitions - is changed
    Recovery image - HARD drive is deleted or moved to another partition or copied to the external device.

    To avoid all this Toshiba recommends the creation of recovery disks. Using these disks, you will be able to install the OS on the new drive HARD or in any other situation listed above.
    Please note: the use of recovery disks will remove all HARD drive, create the new recovery partition and install image recovery, so you still have the same settings.

    I hope I can help you with my explanation. If you have any other questions you are welcome.

  • How can I create an eyebrows in file menu and save the option?

    How can I create a menu of file eyebrows, if I used my user to choose an image from the PC.

    And how do I backup my user settings? (this is application is going to be on my pc users only)

    You can launch a file with FileReference selection dialog. You can save the settings using a SharedObject (like a cookie).

    http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=17_Networking_and_communications_7 .html

    http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=lsos_3.html

    http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=lsos_5.html

    If it is a Flex application, you can select a file from the local computer and send it to the server, you will not be able to open the file in the Flex application, because of the security sandbox.

    If it is an AIR application, you will not have this restriction.

    If this post answers your question or assistance, please mark it as such.

  • OfficeJet Pro 8500 a Premium: How can I preset the trays used for printing and copying?

    I love this machine except for one thing. It takes the paper for printing from the lower drawer. So I used the top plate for single supply of envelopes. Then I'm going to copy something and it makes me put the paper in the upper tray, when the lower plate is full!

    How can I determine if just use paper in the lower tray for copying too?

    Hello

    You should change the copy settings to use the 2nd tray, then you can set it as default:

    1. Click the copy on the front panel of the printer.
    2. Click settings.
    3. Click Select status bar , and then select tray 2.

    You can set the default tray by selecting set as new defaults in the settings menu even.

    Shlomi

  • How can I create greeting cards using digital photos now that Microsoft Picture It is not compatible with Windows 7 Home Premium

    My old computer has Microsoft Picture It and I was able to create greeting cards using digital photos to my computer.   My new computer has Windows 7 Home Premium edition and I can't access on my computer greeting cards or create new ones.  I downloaded Windows Live, but who does not have an option to create greeting cards.    What suggestions do you have?

    Hello

    There are many programs available online that may have similar functions as the image what it program.
    I suggest that you use your favorite search engine and looking online for a similar program.


    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Kind regards
    Afzal Taher
    Microsoft technical support engineer

  • How can I create a group using a custom domain in Windows Live Domains of email delivery?

    I have a domain - mydomain.com, that uses Windows Live Mail to his provision of email., via Windows Live Domains.  When a visitor comes to my site, they see that they can send me an email to * address email is removed from the privacy *.  When they do, the email is sent to * address email is removed from the privacy *, * address email is removed from the privacy *, * address email is removed from the privacy * and * address email is removed from the privacy *.

    With my previous provider of e-mail, I was able to do, but the messaging system was extremely basic and I wanted to use Windows Live Mail to access other Windows Live services with a single login.  Is it possible to have the transfer of groups set up, ideally to the Center, using Windows Live Domains?  I asked the support of network in June and they said yes, but they would intensify the issue to their next line of support... and I never heard from them again.  Any help would be greatly appreciated.
    This is related to Windows Live, and unfortunately, this is the closest forum for Windows Live on the site of answers I can find...

    Hello Naytee

    Unfortunately, this isn't the community to ask questions of Windows Live. Since you are on a domain, you can ask your question on our TechNet forums. The link is below. Thank you.
    http://TechNet.Microsoft.com/en-us/Windows/cc468658.aspx
  • How can I create a slide show with pictures and music CD?

    I use Media player and learned to copy CDs on my albums. How to download a song on a CD that already has images. What I'm trying to do is create a CD with photos of a wedding in a slide show format and add a song while he discovered the CD. Can you please help? Thank you.

    original title: music

    Hi Amazonite,

    Try with windows movie maker.

    http://Windows.Microsoft.com/is-is/Windows-Live/Movie-Maker-get-started

  • I have 10 devices all under the same identity of apple my partner can see all my contacts, call logs and use of all other web internet devices. How can I change this, to keep my contacts and call log on my phone only?

    I have 10 devices all under the same identity of apple my partner can view all my contacts and call logs and vice versa.

    The device can also see all internet pages use the devices, but mine isn't... How to get our contacts and call the newspapers private their own device and how can I get to keep an eye on web pages using my children? So how do for my phone, the master device / hand who is in control of access for all, because it has my info from apple id and card credit on all devices.

    Stop sharing an ID first. They are not meant to be shared. Then set the sharing of family. Each individual should have their own code.

  • How can I create a NamedQuery using a foreignkey as parameter?

    I need to be able to create a named query that would be subject to action, but the ORG_ID is a foreign key in the containers and methods is a type of organizations rather than a long. This is why I could not understand how to create a namedQuery that would work. This could be my answer if you have someone who knows how to write the query.

    It of what I've done so far but does not give me the results that I need...

    My names table for the query, I am doing...

    Organizations (onetomany)
    Containers (manytoone)

    In organizations...
    @OneToMany (mappedBy = "organizations")
    private list < container > containersList;
    In containers...
    @ManyToOne
    @JoinColumn (name = "ORG_ID")
    private organizations;

    I have a query named in Organizaions to pass the org_id. It returns the list of containers that I can drag my jspx. Currently, all containers to display it. (There are 130 lines of data). I need only a subset of data based on the column of the table of containers called type_id. I need to be able to view the type_id as links, and then allow the user to click it to display the containers so that type_id (and of the Organization, it's why I try to use the containerslist off the coast of the organizations namedquery).

    Thanks for your help,
    Tracy

    Hello

    You can have something like the following:
    "SELECT DISTINCT o.type containers o WHERE o.organizations.orgId =: orgId.

    Kind regards

    Pino

  • How can I create a PDF using Acrobat 7.0 in Windows 8 of a drawing on a Visio 64 - bit system

    I used to be able to create a PDF with Acrobat 7.0 to a drawing file in Visio XP. Now I'm on a 64 bit system, no Adobe printer can be installed, and it is not supported.  Help?

    On a 32-bit system, there is a solution. I don't think that it is possible to get AA7 to work on a 64 bit system (no one has reported success and only 1 suggested success with AA8). You may be able to print to a PS file, and then open that in distilling. I suspect that this is the only way and you need to find a decent printer PS driver to do so. I suspect that the driver printer (and associated AcroTray) will not work in a Win8 64 bit - Acrobat and Distiller can.

  • srvrmgr syntax: How can I create subsystem named with the name and Description of the values?

    Looking through the library, he did discuss are of syntax that allows you to include the value of name and the named value of the Description of a subsystem/Profile Configuration.  In the screenshot, the circled values were created with the server online order Manager.

    NamedSubsystems.gif

    On the other hand, pouvez create a definition of the element with a name (full name) and a Description.

    For CompDef, it works:
    create the CompDefTest1_enu component definition for the type of component AppObjMgr component fins group run mode interactive full name 'Test Comp Def Test 1' description 'Test 1 CompDef Manager object.

    For named Subsytem, it does NOT work:
    create named subsystem Test5 subsystem EAITransportDataHandlingSubsys full name 'Test 5' description 'Test 5 Description'

    Someone can tell me if there is a good for a named subsystem, syntax to include the name and Description of the values in the command line, or is the only way to create it manually in the UI?

    Hello

    I spent reviewing aid to create the order in srvrmgr, it does not give the full name and description as parameters for the creation of subsystem. However, as you noted these settings are available for creating components definition:

    srvrmgr > help to create

    Create {component group | compgrp}

    [full name: ]

    [{description | desc} ]

    create {definition component: compdef}

    for {component type | comptype}

    {Component group | compgrp}

    run in mode {batch | interactive | background}

    [full name: ]

    [{description | desc} ]

    [with [ param =[, =...]]]

    [[fixparam =[,...]]]

    create the subsystem named for

    subsystem with = [,...]

    Shelf also has an example of creation of subsystem that doesn't include no description, name and first name:

    http://docs.Oracle.com/CD/E14004_01/books/StoreFwdMsg/StoreFwdMsg_InstallConfig14.html#wp1351472

    In this case I suggest that allows you to create a ticket on My Oracle Support to confirm this srvrmgr does not support the creation of a new subsystem with the full name and description settings and request an enhancement for these settings include request in create statement for new subsystems when using srvrmgr.

    It will be useful,

    WSiebel

  • How can I create my own social media buttons and connect again?

    I want to create my own buttons of social media (from facebook, twitter, google + and pinterest) and have always related.

    When I use the widget to social media in muse, I can't change the layout. Is there a work around?

    I tried using the code from the developers of facebook share on the page properties, but it has always created a tiny facebook button that I couldn't change.

    Does anyone know a solution?

    Thomas

    Hi Thomas,

    What you can do is, manually import the custom icons that image of Muse and link them to your pages.

Maybe you are looking for

  • Impossible to install on a Satellite P100-488 error 1603 with Win Installer TEMPRO

    Hello I am writing this post because I have a problem to install the software on my Toshiba P100-488 Tempro. Indeed, on the first screen, I get an error message 'installation stopped prematurely' reading.When I check in the Windows Vista event handle

  • How to connect by Satellite 1800 400 on TV?

    HelloI want to connect to my Toshiba Satellite 1800/400 on my TV, but I don't know how to install a secondary graphics card. My graficscard is a Trident Cyberblade Ai1 video accelerator.Please help because I get hopeless and frustrated because I need

  • Satellite C660D-178 file system fail to SSD using Linux

    Hello I have a reproduction of corruption of file system behavior when you use C660D with disk SSD Kingston SV100S2. The level of corruption varies from corruption of the file system individual nodes to complete data loss (no data can be read by test

  • screen opens on the side

    Dead cat walked on her knees open top of page, then decided to sit on it, beautiful and warm, sort now when I turn it on the screen is side ways. I can fix, but then does it again the next time that I put it back on - side rough and it upsets my icon

  • Need help to install windows 7 Home premium on my mac.

    Ideas: Need help to install Windows 7 Home premium on my Mac Error messages Recent changes to your computer What you have already tried to solve the problem Remember - this is a public forum so never post private information such as numbers of mail o