How can I create a horizontal line on a line of text?

Similar Questions

• How can I create a dotted line no bent/curved on a path?

  Usually, when you check the option 'dotted line' on the palette of the race, you can instantly create a dotted on the selected path. What I do not know how has retained ownership of right of a line on the parts of the curve of the track.

  

  (Image improvised to illustrate my problem)

  Joshyfrott,

  You can:

  (1) create a short straight path with the length and width of the dashboard (right) it is to replace (you can create it as a vascular accident brain/nofill path, or you can create a rectangle to fill/nostroke with the same appearance).

  (2) in the tick flyout palette/Panel new brushes brush, tick Scatter Brush, set the spacing to 200% and set the Rotation path and give it a name.

  (3) apply to the brush on the path.

• How can I make a single line of text (within an existing paragraph) more small?

  I have a paragraph in an existing site, and the client wants to make the last sentence of the smallest. It's something I've never done and my attempts have so far failed.

  The site is www.ourhealthcarecrisis.com and the line of text at the bottom of the column on the right "(Ahmed vers le bas pour voir) '."

  Thank you

  Insert a tag around the text:

  It's smaller text

• How can I create a horizontal row of divs?

  I want to create a series of lines of equal size divs - like a box of chocolates - and finds it difficult to make them run across the page.  I thought it was as simple as do display 'inline' instead of 'block', but obviously not because it doesn't work.  The page will be dynamic, so it's important that I have make it work so that any number of the divs will work horizontally, then vertically on the page.

  Here is the code:

  < div class = "input" >

  "< img src="images/Inputs/wired.jpg "width ="40"height ="40"align ="left"class ="left"/ >

  The Connect lets you link any him swinging back towards the

  < / div >

  < div class = "input" >

  "< img src="images/Inputs/wired.jpg "width ="40"height ="40"align ="left"class ="left"/ >

  The Connect lets you link any him swinging back towards the

  < / div >

  < div class = "input" >

  "< img src="images/Inputs/wired.jpg "width ="40"height ="40"align ="left"class ="left"/ >

  The Connect lets you link any him swinging back towards the

  < / div >

  And the css:

  . Input {}

  background-color: #EEE;

  border: 1px solid #999;

  height: 300px;

  Width: 300px;

  display: block;

  }

  Thank you

  SW

  Streetwitch wrote:

  . Input {}

  background-color: #EEE;

  border: 1px solid #999;

  height: 300px;

  Width: 300px;

  display: block;

  }

  Thank you

  SW

  Replace display: block; with float: left;

  . Input {}

  background-color: #EEE;

  border: 1px solid #999;

  height: 300px;

  Width: 300px;

  float: left;

  }

• How can I create aligned horizontally RadioGroup options?

  Like this: I use smiley like radio for the post button

  Option 1 option 2          

  Help, please...

  My problem has been resolved.

  I used the ImageButton control to deal with.

• BlackBerry Smartphones how can I create a new contact from an unknown SMS/text?

  Hey.  When I receive an SMS to a number, I don't know how easily I add them as a contact, while in my Inbox, it shows me their names and not their number?  I tried to look on the forums but cannot find an easy solution.  There must be a quick way to do it, no?

  oilersrock99 wrote:

  Really?  Because you can easily do it with the curve.  You have to pull up the menu while in the text and select "create a new contact."

  Thanks for the attempt if.

  OK, so my OS has been upgraded last night (at v5.0.0.743 v5.0.0.862) and I now have the ability to add SMS numbers as contacts.

  So, to add the SMS number as a contact, simply do the following:

  In the SMS of the person you want to add, click on the BB button, and then select Add to Contacts. Fill in the details required for the person.

  If you do not have this option, then you can upgrade the operating system on your BB. RIM sometimes falls options from version to version of the OS, but return them to the successive versions.

• How can I create more than one CSS style for the text links?

  Hello

  Just like the title says, I need help to create more than one CSS text link style in Dreamweaver CS4. For example, I want that navigation on the site that I am building to have a style of link different text as a link in a certain part of the body copy. I played with Dreamweaver for awhile and can't find a way to do this. If it is still possible to do so, I'd appreciate any help.

  It is a common requirement in most Web sites.

  It's faster and easier to implement directly in Code view

  Good tutorial here

  http://www.Projectseven.com/Tutorials/CSS/Pseudoclasses/page3.htm

• How can I create a space on the side of my text frames?

  I have a long document with just blocks of text and text, paragraph styles and variable text running headers and feet. The margins of the document are set to fill most of the page, but now I've decided I want to create a space on the right side of the page, put notes various and other items for the player.

  Could someone tell me the best way to do it, now that I have my document all set up, in a way that will be most effective?

  I think that what you are really after to change the margin and have adjusted the text, no block?

  If this is the case, the page layout > layout adjustment... Turn the page layout setting, and enter the master page and adjust the margins. Frameworks, aligned with margin guides should adapt to the new size.

• How can I create a reference to a percentage value?

  For example how can I create a horizontal guide to 33%, 50% and 75% to the bottom of the artboard?

  Thank you!

  Kurren Nischal,

  Whatever the version, you can (commented on are your friends, and you can copy the height of the artboard to file > Document format):

  (1) drag tool line from the lower left to the lower right corner (Smart Guides say intersect in the corners or the current page ).

  (2) then move it back up to a quarter of the height of the artboard (IE 75% down).

  (3) then back up a copy of the same amount (i.e. 50% down).

  (4) then back up a copy of the same amount divided by 3 (or 33 1/3% = a third down) or multiplied by 0.34 (it is 33% down).

  (5) then select all and view > Guides > make Guides.

• How to create a horizontal line in the region of html

  Hello

  How can I create the html elements, including a horizontal line in an html area filled with items. I want to use this horizontal line to part elements optically. Moreover, my solution for now is to group the elements belonging together in a separate html area. So I have now 3 parts of html, each filled with 5 columns of elements. Is it possible to align the elements in the 3 regions (together)? Cause at the present time, only the items in each region are aligned.

  I use oracle 11 g 2 with apex 4.1

  wucis wrote:

  Apex version is 4.1

  Theme: Sapphire 17

  Page: Two level Tabs - right Sidebar (optional / based on a table)

  The region is HTML

  Main question is, how to create a horizontal line as visible separator between items.

  My personal preference would be to group the items according to the needs in the subregions and use CSS to display the Visual borders and uniform spacing of control over formatting tables.

  If however you want using HTML single region, is to create elements of the only view to the agenda of the positions of the sequence in the region where you want the jumps to appear, with the following parameters:

  Name: PX_HR_1 / / substitute suffix number and an increment of page as required

  Display in the form: Display only

  Save Session State: NO.

  Start on a new line: Yes

  Start the new field: Yes

  ColSpan: number of columns in your layout

  Label: leave blank

  Horizontal/Vertical alignment: Above

  Model: --choose a model--

  Type of source: Static assignment

  Source of value or expression:

• By creating a form that has several text boxes to a single character on the same line, how can I get the cursor to go in the next text box automatically after inserting a character?

  By creating a form that has several text boxes to a single character on the same line, how can I get the cursor to go in the next text box automatically after inserting a character?

  Create a text field and use the option 'comb n characters.

• How can I create a progress bar in main vi

  How can I create a progress in primary vi bar can any1 help me... I have repeatadly m asking for help and no response 1... its very dissopinting...

  Hi Bellefroid,

  Take the horizontal progress bar indicator and give the value which is based on completed processes.

  

  Kind regards

  Adel T

• How can I create a rectified ondulaire tia sal22 of the signal

  How can I create a rectified signal ondulaire.  I figured out how to create a half signal by using the upper and lower limits just having trouble with the next part.

  TIA sal22

  Do you really need to put "air sal22" in the subject line of each of your messages?

  To make a full corrected the sine wave, just put a function absolute value on your wire waveform.

• How can I create a list of contacts on Outlook Express. I found the answer in help, but cannot locate elements, on what he asked me to click

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:
  How can I create a group or a list of contacts on Outlook Express.  I found the answer in help, but cannot locate elements, on what he asked me to click

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you're running Vista, you have Windows Mail, not Outlook Express. These instructions for adjustment of these two programs.

  To create a group of contacts:

  You can create a single group name (or alias) to use when sending a message to several contacts at the same time. Just create a group name and add individual contacts to the group. Then just type the name of the group in the box for when you send mail.

  1. in the address book, select the folder in which you want to create a group. Click New in the toolbar, and then click New Group.
  2. the Properties dialog box opens. In the group name box, type the name of the group.
  3. There are several ways to add people to the Group:
  a. to add a person from your address book list, click Select members, and then click a name in the address book list.
  (b) to add a person directly to the group without adding the name to your address book, type the person's name and e-mail address at the bottom of the Properties dialog box and then click Add.
  to add a person to both the Group and your address book, click New Contact and enter the appropriate information.
  (d) to use a directory service, click Select members, and then click search. Select a directory service in the drop-down list at the end of the text box. After finding and selecting an address, it is automatically added to your address book.
  4. Repeat for each addition until your group is defined.

  Note

  a. to view a list of your groups separately from the list of address book in the address book on the view menu, make sure that folders and groups is selected.
   
  b. you can create multiple groups, and contacts can belong to several groups.

  If you want to send to a group without addresses are displayed for each recipient, open the address book and make a new entry. Enter the name of the group in the area of the display, but use your address. (Some Internet service providers require a legitimate address in the line to and recipients will know it's from the Group).

  Click on the button to. Enter the name of the group using your address. Enter the group in the BCC field.

  Bruce Hagen MS - MVP [Mail]

• How can I create a repository in ISE for update 1.2?

  Hello

  I'm upgrading to 1.1.4 nodes ISE to version 1.2 in the coming weeks. Following the guide from Cisco for this, I should create repositories on both nodes of our admin and store the upgrade file on the spot. These repositories cannot be created using the user interface. They must be created using the CLI interface.

  How can I create and name the deposits so that I can ftp the file to upgrade to this place?

  Thank you.

  Hi Robert,.

  Here's the example to create the repository using CLI in ISE 1.1.4.

  You can refer to the following documents as reference.

  http://www.Cisco.com/en/us/docs/security/ISE/1.1/cli_ref_guide/ise_cli_app_a.html#wp1013913

  Example:

  Node1-poda / admin # configure terminal

  Enter configuration commands, one per line.  End with CNTL/Z.

  Node1-Poda/admin (config) # demo repository

  URL to node1-Poda/admin(config-Repository) # ftp://64.103.172.80/

  Node1-Poda/admin(config-Repository) # user admin password simple admin123

  output node1-Poda/admin(config-Repository) #.

  output node1-Poda/admin (config) #.

  Node1-poda / admin #.