How can I create a LabView driver with vi existing driver?

Similar Questions

• How can I create a video clip with audio re-bound?

  Hey all,.

  I'm trying CS5 workflow for the first time since the original Premiere Pro...

  I have a lot of Canon EOS 5 d II sequences and audio recorded separately.  I'm bringing a timeline, their synchronization upward, throw the audio on the device and rebind the clip so now I have good video linked to the sound quality.

  Question:

  How can I now get this clip re-paired to the sandbox so I can use it for editing?

  In FCP I can just drag it to the sandbox... but if I do it here I'm getting the video originally on the audio device.

  Any advice would be appreciated... or any other advice on the general progress of it.  Thanks in advance.

  (I'm on a Mac, btw)

  First is not a way to create multiple elements - at least not in the way you're used to. However, what you can do, is use a sequence in another, as if he were a clip; in the nomenclature of the first, it's a "nested sequence.

  Probably the best thing to do is select the video and audio clips on a particular score that you want to synchronize and drag them to the icon of a new item in the project Panel. This will create a sequence corresponding to properties of your video and name identical to your video clip. It will also drop the audio and video clips in itself; You can synchronize the audio to the video here. Repeat this process for as many shots you have or need.

  Then simply use these sequences as if they were clips and edit them in a new sequence. You can drag them from the project Panel in the sequence, or the monitor Source for side panel, or Cmd/command and double-click it to load it in the Source monitor. Whatever it is, it must accomplish about what you are after and are the best that can be done with the functions available in first right now.

  EDIT: Also, if you have already synced up your clips in a sequence and did not want to go back, just select the component elements in your synchronization sequence and either right/Cmd click and select nest (or go to the sequence > nest). This will create the nested sequence and drop it in your bin, but you will have to manually name to keep track of what it is, because it will default to something like "Nested Sequence.05." The rest of the process is the same, however.

• How can I create a wiki page with Adobe Muse?

  I need to create a wiki for a competition, I am, and I want it to look nice. I need HTML code to create the wiki, and all code must be hosted on its website. They have a box that we are supposed to place the HTML code. When I use the code that Muse has exported, there is no CSS. How can I get it work? Thank you

  Hello

  It's something that I recommend because you need to completely restructure the HTML code of the page to do this. You must be technically advance in coding. It will be like the re-write of the code and may even break the code. It is very likely that some features may not work properly.

  Kind regards

  Aish

• How can I create a slide show with pictures and music CD?

  I use Media player and learned to copy CDs on my albums. How to download a song on a CD that already has images. What I'm trying to do is create a CD with photos of a wedding in a slide show format and add a song while he discovered the CD. Can you please help? Thank you.

  original title: music

  Hi Amazonite,

  Try with windows movie maker.

  http://Windows.Microsoft.com/is-is/Windows-Live/Movie-Maker-get-started

• How can I create a 'master' document with multiple variations?

  I designed a card that will be displayed to the few dozen intersections with a symbol 'you are here '.  Everyone will be identical except for this symbol.  I don't know if there is a way to do everything while preserving a 'master' card which can be changed at a time.  For example, maybe I need to change the location of the paths, and it would be a real time saver if I didn't have to edit files 20 + (each with an arrow in another spot but otherwise the same) separately.  Also, I'll send the file by e-mail to a professional printer, so I am very uncertain about what would be a standard way to format something like that and don't really want to clog their e-mail.

  I was not able to determine an easy way to do it.  I wonder if it involves the use of several work plans, a feature that I'm not very familiar with, or if it is easiest to have a layer for each location of the symbol and just save twenty records (phew) and send to the printer in the form of separate documents - which seems super awkward.

  I tried to copy the plan of work several times.  It was my best attempt of editing at the same time: I created what I needed on a workplan, dragged to the symbols Panel, then cut, then went to edit > paste on all work plans.  However, this does not simply play with a trace or an object that already exists and I can't understand how I would delete the same object of all work plans.

  If anyone has some ideas, I'm pretty novice, so please keep in simple terms. Also, I'm in a bit of a lack of time, so quick responses are much appreciated!  Thank you!

  If you save a PDF file, you can include layers (just check the box in the second save dialog box) that can be turned on or off allowing a single file in order to have all the data. You are going to have these printed in a professional manner?

• How can I create a 'short cut' with my email address becomes a one-click function

  I get my e-mail several times during the day. would like to have a quick shortcut that remembers the full address with a single click

  Firefox has a feature that will hold the values you type in web forms. So the next time that you fill in your e-mail address if you just type the first letter, Firefox will offer a value that you can auto complete. He put to work by default. This article describes how it works - check if Firefox automatically fills in forms.

  Other that that, there is "Clipboard managers" - programs that add additional functionality to the Windows Clipboard function. This wikipedia article lists a few of them http://en.wikipedia.org/wiki/Clipboard_manager#Windows

• How can I create holes plated copper with and ring finger with Ultiboard 13 (PTH or compatible Pin Hole)?

  I am a new user of Ultiboard 13 (Windows7 64 bit). I see how to create holes in a circuit printed (with the option of annular ring), but I don't think that the hole is copper plate. Hole diameter specification is relatively obvious, but it doesn't seem to be a way to define the thickness of the plating through hole plated (if it's at all the possible). Finally, I would like to create footprint requiring approximately 150 holes of PTH in 2-pin compatible with different sizes (for a single connector!). Any help with this would be fantastic!

  Yours,

  Thank you very much! That's what I was looking for.

• How can I create a great picture with just a few numbers in there?

  Treat all

  I would appreciate if you can help me with this problem.

  I would like to highlight certain points on a diagram that its horizontal size is 1000. so I create another table with the same size of the main diagram that contains my points you want then I have to put the other free sites like ZERO! that is not suitable at all.

  so I think in an array of size 1000, but with just a few figures in there, but I think that's not possible.

  Please tell me if there is any other soloution.

  Thank you very much

  I will mark the best answers for sure

  Ali

  Hello Ali,.

  If I understand, you want to score orhighlight some certain points in a graphic waveform. A simple way to do this is to use annotations (for example, without the arrows, a few points), there are the examples come with LV another way is to use an XY Chart. Here, you can put some points to certain positions-X.

  Maybe it helps,

  Welcome, dave

• How can I create a slide show with keys working on an interactive InDesign document?

  I am trying to create a slideshow of images with keys working on an Interactive InDesign document and followed the steps of "InDesign CC Classroom in a Book", but when I saw the document as they do not seem to work, I had the idea where I went wrong, can anyone help?

  Why do you have it convert again? It is no more a button. And the action the button must be on the release or press.

  And to be more specific. Interactive document doesn't mean anything. What's your game to end here? EPUB? Publish online?

• How can I create a stamp personalized with a form to fill out on this subject?

  Hello

  I have a stamp that I need to insert on each invoice I received and the analyst must complete these observations: (I'm using Adobe Acrobat PRO XI)

  

  I want to create it as a stamp so the analyst can stick to one each document it receives. Any idea? When I create a stamp with the form, forms cell disappear and only paste text lines.

  Thank you all!

  This kind of timbre is called a dynamic stamp. However, once the patch is applied it is flattened and its content can no longer be changed directly.

  The way around this is to use a script that prompts the user to fill in these values when the buffer is applied. Then the values are inserted into the form fields and the stamp affixed to the document with the data entered by the user.

  There are a lot of tutorials around (including a book!) on this topic, and there are several people who develop of such stamps for a fee (including myself), because it is not a simple script task.

• How can I create a button 'Next' with database insertion action

  Hello

  I want to create a button "Next" will redirect to another page, and at the same time to do a database INSERTION action. I searched on google but I can't find anything specific that would help me.

  Here are a few screenshots:

  http://imagizer.imageshack.us/v2/800x600q90/22/2yqj.jpg

  http://imagizer.imageshack.us/v2/800x600q90/585/wbn6.jpg

  Thank you.

  Fund a process at the level of the page with the SQL to insert values, when click the button (NEXT) and then redirect the page.

  or

  set the item & values to the landing page that passes the values for page location.

• How can I create a slideshow (mixed) with a hover which triggers the previous frame or next?

  I want to create a slideshow of images to bicycle at random on autoplay, with a stationary flight that would manually determine an image change in this slide show.

  Is this feasible? Advice or tips would be greatly appreciated. Thank you very much!

  Hello

  With slide show, we cannot install effect hover for the passage of the image, but you can use the composition.

  Composition used triggers and Setup see the target on bearing and place the triggers just under the target window so that when users hover over them thumbnail images will automatically change.

  Thank you

  Sanjit

• Have icons of way too many shortcut on the desktop, but the problem is that I need them all. How can I create multiple user accounts with access to all the full program info/files/programs?

  I would like to create the following user accounts:

  1 DeadBoneHunter responsible of genealogy research with full access to all ACCOUNTS/FILES/PROGRAMS.

  2 FLAGGER INSTRUCTOR ACCOUNT with full access to all files, etc.

  3 user of the account of the traffic control with full access to all files etc etc.

  4 Traffic Control Supervisor account with access full etc. etc.

  5 medical accounts Cathy / Warren

  6 EXPAND THE ICON FOR EACH USER... VERY LARGE... THAN WHAT IT IS NOW. WHEN THE WINDOW OF THE SCREEN WITH ALL THE INDICATED THEREON USER ACCOUNTS, I WOULD LIKE TO MAKE ALL THE MORE GREAT.

  >

  > USE WINDOWS 7 ULTIMATE 64

  LAPTOP CONNECTED TO 52 '' MORE LARGE LED DISPLAY AND HAVE A SIZE OF KEYBOARD DUE TO ARTHRITIS IN THE FINGERS CAUGHT TIME TO FIND KEY WITH ENLARGED BUTTONS AND FORMAT PANEL. I HAVE TO JUST GET BIGGER THE ICONS ON THE DESKTOP OF THE USER.

  YOUR HELP WILL BE MUCH APPRECIATED. Thank you

  Here is a close-up.

  

• How can I create different formats associated with DPS 2015?

  I drove to the top of the iPhone version, and now I need to resize to the tablet. My question is, how do I do this in the DPS Portal? I don't see in the documents given to adobe.

  A few questions:

  Your project 1 top-level collection or collections of higher level 2? Select "Collections" in the left rail and then search for either a collection called "default" or two collections called "phone by default" and "default tablet." If you have just a collection of 'default', this means that all of your content will appear on phones and tablets. If you have "phone by default" and 'default tablet', you must specify the contents of the collection of the tablet. This is determined by a project setting that you specify when creating the project. For the moment, you cannot change this setting.

  You want to include a different content for tablets and phones, or you want to use the same content in two? As a general rule, the HTML items work well on phones and tablets, but for fixed layout (at base of InDesign) items, you may consider creating separate articles for phones and tablets.

  Next week release includes a new system that we call "renditions available." When you define a layout template, you will be able to create different layouts page (or "renditions") for tablets, phones and the web. For any collection that appears in phones and tablets, you will be able to design layouts to browse different for the target device.

• How can I create a theme Wordpress with Adobe Muse?

  Hello Muse user,

  I wonder if I can create a Wordpress theme using only Adobe Muse? is there a pluging for this?

  In advance, thank you for your answers.

  N °