How can I create a set of installation / recovery discs?

Similar Questions

• How can I create on my Acer system recovery discs?

  I need to store window 7 onDVD (back-up for window 7) for a brand new with Windows 7 operating system already in computer

  
  

  I compurt any new branch (ACER expires), already having Windows 7 installed. They advised me 1st step is to have a back-up for window 7.

  I want to do it myself, I began to use the computer again.

  • Can you send me guide/steps to store my window7 on DVD?
  • How many DVDs I need, I have a box of 4.7 GB dvd, so 4-5 enogh?

  Thank you

  Rafid

  When you use the Acer software to make records of recovery, 4-5 should be enough.

  Acer - create recovery discs:

  http://Acer.custhelp.com/app/answers/detail/A_ID/12866/kW/recovery%20disk

  Your Acer computer includes an eRecovery Management software that allows you to perform operations of restore directly from your disk hard drive , which allows a faster recovery process and no need for discs. eRecovery Management does, however, allow to create recovery discs. The recovery disks will allow you to restore your computer something happened to your hard hard disk .

  Note: According to Acer computer you have your eRecovery Management version may be slightly different, but the ability to create your discs will be available.

  To create your recovery discs backup follow these steps:

  1. Click on the Start menu, and then click all programs.
  2. In the list of programs, click the Acer file, and then click the Acer eRecovery Management .
  3. User account control Windows may request your permission to run this program, click Yes.
  4. In the Acer eRecovery Management window left click backup, and then click create a default disk factory.

     Note: If you use a laptop or netbook, you will be asked to connect your power adapter, make sure that the power adapter is plugged in before continuing, and then click OK.

  5. In the page to create a default disc factory select the drive you want to use for burning the recovery media, and then click Start.
  6. The disc is ejected whenever he has completed burning, if several drives are required insert a new disc when you are prompted, and then click OK.

  What makes a system image is another option, but it will usually more then 4-5 DVD.

  Create a System Image in Windows 7 before installing
   
  You can make an image of your installation of Windows 7 system and it allows to restore Windows 7 to its state when the image was made.
  1. click on the Start Menu and type "Save" then click on back up your files.
  2. then click on create a system image.
  3 select the location where to save the image of your system, and then click Next.
  4. check your discs to back up, and then click Next.
  5. verify the settings, and then click Start backup to start.
  6. once the backup is complete, it asks to create a system repair disc, click Yes.
  7. Insert a CD or a blank DVD on the hard drive, then click on create disc.
   
  How to restore Windows 7 from a System Image
  http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Satellite A100-784 - how can I make another copy of my recovery disc DVD

  Hi all

  I have the Satellite A100-784, which comes with Vista Home...
  How could I make another copy of the DVD from my recovery disc?

  Also, I don't have the Toshiba Recovery Disc Creator... is downloadable?

  Hello

  You n t have the Toshiba Recovery Disc Creator, because this Toshiba Software is preinstalled on laptops equipped with HARD drive recovery option.
  I presume that you have received a Toshiba Recovery disk this laptop doesn t allow HARD drive recovery.
  Therefore, you cannot create a new DVD of recovery using the Toshiba Recovery Disc Creator.

  What you could do is to copy the supplied recovery disk.

• How can I get the DV9225us (DV9000) HP recovery discs?

  I searched on the HP Site, but all my son wound up as dead ends for this model (REF # RP122UA #ABA). The laptop is running Windows Vista 64 bit on an AMD processor.

  The option of order recovery disks online is to have a downtime for some older models, probably because they are out of stock or not available.

  Call HP and give him a double check just to be sure about this.  Sometimes, if HP has not you can give another chance to the Web site below.

  http://www.restoredisks.com/

• How can I perform a complete system without recovery discs recovery?

  original title: complete the recovery of the system

  I have Windows Vista Home Premium without possibility of recovery or disks and I want to restore my computer to its original state (when I got it). How then? Help, please.

  Hello

  Reinstall Vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How can I create a pause in my inspection so that I can change a setting on my DEGREE, and then resume with the rest of the inspection?

  New to Labview and NI Vision in general here.

  How can I create a pause in my inspection so that I can change a setting on my DEGREE, and then resume testing?

  I want my inspection to execute algorithms on the acquisitions of two different images, where the break to change the settings of my DUT.  I thought that the breakpoint was working well when I'm in the configuration interface and I run the State, but it seems that when I run the inspection he jumps on the breakpoint and continues on the next stage of the inspection immediately.

  Are you running Vision Builder AI on Windows or on a remote target? If you have a remote target, which?

  On Windows, you can use a step of user input in the last tab of the Vision Builder AI tool palette.

  It will display a dialog box that is paused the inspection until you click on a button.

• How can I create a column 2 "vertical on the left side of my rhythm of House for the installation of the buttons?

  How can I create a column 2 "vertical on the left side of my rhythm of House for the installation of the buttons?

  How can I create a column 2 "vertical on the left side of my rhythm of House for the installation of the buttons?

  With a column CSS floated.

  But ask yourself this important question.  How this column 2 "wide will look on smaller web devices like tablets and mobile phones using the portrait?   2 "on a mobile phone is a big part of the space.

  Nancy O.

• How can I create a trigger e-mail messages sets a phone when Gets an email from particulry?

  Hi team, support
  Customer email thunderbird whit, how can I create a trigger e-mail messages rule a phone dial when comes a word of the body particularly E-mail?

  Kind regards
  Alessandro.

  I don't think you can do this with ordinary Thunderbird. But this add-on

  https://addons.Mozilla.org/en-us/Thunderbird/addon/FiltaQuilla/

  allows you to run javascript or IIRC, launch an external program when a given filter condition is met. So this does not exactly provide an answer to your question, but allows a possible solution. '

• How can I create a full recovery for OS and preinstalled software media?

  Hello
  My son´s accompanying the new Satelite L855-10U preinstalled OS and much other software already installed on the HARD drive, but no installation media, the client is supposed to create a tool from Toshiba.

  I created 6 Swedish recovery for the operating system using the tools Toshiba had installed on the HARD drive.

  To do this 6 Swedish, I created with the Toshiba Recovery tool contain the operating system and all other preinstalled software?

  How can I create the installation media full and usable if not for the operating system and all other preinstalled software?

  I can´t find all the information on the backup software pre-installed with the exception of the BONE. Is there complete information how to do the above, in the manual of the computer, or have you missed this information?

  I would like to know how I can create media backup complete and usable for the operating system as well as for all other preinstalled software, so I can recreate all the facilities of the plant at a new disk if/when the original HARD disk crashes.

  Is there a partition hidden with pre-installed software, and if so, how can I create a backup of this partition, or all the software, so I can reinstall everything if the HARD drive fails, if it is already not with the Swedes 6 Toshiba tool created for me?

  Forward to your response and to complete your customer documentation about the complete instructions for installation and recovery media creation.

  Thank you very much!

  Baltazar

  Hello

  On this forum, you will find a lot of useful comments on the recovery image saved on the HARD drive and its operation to the facility and the creation of recovery disks.
  All this is clearly and simply.

  Front of Toshiba offer new people for laptop in software development create recovery image. This recovery image will be created for each laptop model (specific hardware configuration). Recovery image contains the operating system, all necessary drivers, tools/utilities Toshiba specific and some other software like DVD/Blu-Ray, Microsoft Office test drive and the antivirus application. With this configuration every laptop owner can begin to use the laptop without having to install important applications.

  This package is then saved on the HARD drive and can be used for the installation of HARD drive recovery - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm. In other words, if something is wrong with HARD drive recovery facility you can reset the preinstalled operating system and reinstall recovery imae. After that make you have absolute same settings you had after purchase and first start of the laptop.
  HARD drive recovery image can not be used if:
  -HARD drive is defective
  -you have installed the version of the own BONE
  Structure of the HARD disk partitions - is changed
  Recovery image - HARD drive is deleted or moved to another partition or copied to the external device.

  To avoid all this Toshiba recommends the creation of recovery disks. Using these disks, you will be able to install the OS on the new drive HARD or in any other situation listed above.
  Please note: the use of recovery disks will remove all HARD drive, create the new recovery partition and install image recovery, so you still have the same settings.

  I hope I can help you with my explanation. If you have any other questions you are welcome.

• How can I make a set of my pre-installed Windows XP system recovery disks?

  How can I make a set of recovery discs from my Windows XP pre-installed system supplied with the machine? It works ok (so not the repair feature). It there is just so much junk from test facilities in the background that I want to do a complete wipe-out and re - install, but I don't have any original Windows XP disks.

  The process to create recovery disks is different according to the model of the computer.

  Check your manual for instructions or see website of support from the manufacturer for instructions.

• How can I create a junk mail folder so I can watch the outlook express emails is filter

  Laina

  I have run outlook express for my e-mail but don't have a junk folder; That's why I don't get e-mails I want; How can I create a junk mail folder so I can watch the e-mail program's filter? Thank you!

  OE downloads the messages from the server and has no capability of blocking incipient unless you set rules for such.  So if you get any messages, they are likely in junk e-mail on the server (that OE does not have access to) and you must go to Webmail to access the server, then you can go to the Junk folder and find messages that you do not receive.  OE has no control over the filtering server - you can adjust on the server via webmail.

  Steve

• How can I create new revision by RIDC Api?

  Hello

  How can I create new revision by RIDC Api... I want complete example please.

  Thank you

  The point is not in the service, the point is that you meet a single parameter of the databinder by dataBinder.putLocal ("IdcService", "CHECKOUT... ") and then immediately (without appeal to the service) rewrite you it with the setting of the new service dataBinder.putLocal ("IdcService", "CHECKIN_UNIVERSAL");... dataBinder.putLocal (key, value);... dataBinder.addFile ("primaryFile", tf); which is then called ServiceResponse response = client.sendRequest (dataBinder, userContext);

  I recommend you to familiarize with the tutorial - you can get more information about what actually makes CRMI.

• How can I create a new presentation of shop e-commerce in British Colombia? The default layout is inadmissible and who do not steal! :)

  Hello to everyone.

  I've been building and development using BC for awhile but avoids the functions of e-commerce like the plague, because of all my knowledge and trial a mistake, I couldn't adjust available outside the columns of the table how much I can add. I'm looking to create some sensitive stores but feel completely constrained by the store layout because it can't be adjusted. Yes I tried the same and adjustment module style sheet styles declare my rules with "!" important"with no luck. I then asked the team to BC online chat. If it was still possible, and they said 'no' dish. Then I saw 'light at the end of a tunnel' If you want by browsing a few Business Catalyst models (I honestly can't bring myself to use models that I like a lot of this building and landscaping my own pages). With this model here, the cameras and accessories you can see the shop features sensitive so I know it's possible (Damn you BCGurus and your mad skills). I also found some amazing layouts by Enough of Pollution , which has also made a few sensitive shop like this Web sitelayouts.

  Overall, how can I achieve this? How can I create a fully customized store page layout and virtually any custom also available? I have the feeling that I needed to learn the programming language for this liquid, but seriously, the indications at this point would be greatly appreciated! If I learn liquid programming, I'd love to learn where there might be some amazing courses / tutorials / documentation. I have the feeling, it comes down to create my own model of liquid layout and rerouting of the off-set modules in the new model... I'm on the right track?

  Sorry, so many questions. Let me tackle that I really want to know haha!

  
  
  

  • How can I create a layout of the sensitive shop in British Colombia?
  • What would be the necessary steps?
  • If I need to build models of liquids, where can I learn all this? (I know that the BC user guide has much butI will not lie, it's a little overwhelming)

  Thank you all so much for your time in reading this and I greatly look forward to learn more about Business Catalyst. Honestly, I'd love to try and use this platform for all of my clients.

  Hello

  Support will be have not said you that it was not possible, they would have told that it is outside the scope of their support. Is this possible? Of course, it's, it's the foundations of basic BC, HTML and CSS more then anything else.

  Honestly, it has nothing to do with incredible skill, amazing code or anything else.

  First of all, BC is just tags and you should use reference material:
  The developer reference

  Here you see the overall plan and tags. If you look at the list of product tags you see that you can set in a list schema (no tables).

  From there allows you to encode your small layout, large presentation cart layout, provision of registration (payment) because you need to and code the CSS to adapt.

  -You can float elements so float the li of the store

  -The basics of the CSS to make the elements of fluid width of code etc.

  -Questions from the media CSS code to make sensitive matters

  All pretty much toast front-end html, css, nothing special here development stuff. You have classes on the points for each element of a line in British Colombia according to the parameters that you set on the tags and so on.

  If you want to take the next step you enable liquid markup in the characteristics of BC and take things further.

• How can I create a new document in Photoshop CC and have 300 dpi?

  How can I create a new document in Photoshop CC and have 300 dpi? I do digital scrapbooking and need to have my layout in Photoshop 12 x 12, so it's a scrapbook page and 300 dpi and I hope that sounds stupid, but I don't know even what dpi means.

  Thank you

  File > new

  Set preset to print and WE book

  (type the width and height values will change the custom preset)

  Setting width of 12 inches

  height of 12 inches

  the value 300 PPP (should already be present if you have used the print preset)

  Click OK

  

• How can I create css

  How can I create css?

  There are three different ways for the style of your web page.

  Inline styles

  Better inline styles use sparingly. Use them when you want to override a style coded in your external or built-in styles. Also use them when you want a quick change where style is often not necessary.

  Embedded Styles (styles)
  

  The built-in styles are best when you use styles several times on a single page, but these styles are not necessary for most of your site.

  External styles

  External styles are better used to set styles that will be used repeatedly through many pages of your website. This allows you to make a change in the external style sheet and have that change is reflected on all pages that draw their styles.

  The best way to start is by going to CSS how to