How can I detect the minimum and MAXIMUM values of the inputs to the NOR-Scope channels (NI-SMU-1073)?

Similar Questions

• How can I change the minimum and maximum values on a map of metrics.

  Sorry, I'm new to vCOPs and it drives me crazy.  I searched the community and Google, but found nothing so thought I'd post here.  I am interested in a VM in vCOPs and select operations - tab the metric.  I add the CPU usage | Use (%) to the table.  By default, the y-axis is has a low of-40 and a maximum of 60.  Well, my % of the CPU usage never goes below 0% right?  It's hard to look at this figure.  Also, I like to see usage to 100% as a maximum rather than somewhere just above where is the top of the chart.  Looks like there should be an easy way to change the minimum and maximum y, but I can't seem to find it.  Can someone show me what I'm missing here?

  Thank you

  Bob

  He does. There is no way to force it to a specific axis. For vC Ops, there is no concept of a "desired" min and max for Y axis in respect to the display by the metric system settings type. All the data is dynamic and can be any value graphically speaking.

• How can I detect the support version lower than 4.7 touchscreen

  Hi all

  I am developing an app for non touch devices with version 4.5 of departure and now will make the same application for devices supporting contact, so planned to use the Touchscreen.isSupported () - but it is available only from 4.7. But the app should take charge of 4.5, so how do I detect the device is palpable or not palpable in version 4.5?

  Thanks in advance,

  Kitty.

  You can use this code:

  new Canvas() {}
  protected void paint (Graphics graphics) {}
  }
  }. hasPointerEvents()

• Get the minimum and maximum values

  Hi all
  
  Please, how can I solve the problem below.
  

  WITH DT1 AS
  (
  SELECT 'A' ID,  3 MIN_VAL FROM DUAL UNION ALL
  SELECT 'B' ID, 25 MIN_VAL FROM DUAL UNION ALL
  SELECT 'C' ID, 55 MIN_VAL FROM DUAL
  ),
  DT2 AS
  (
  SELECT 21 MAX_VAL FROM DUAL UNION ALL
  SELECT 37 MAX_VAL FROM DUAL UNION ALL
  SELECT 41 MAX_VAL FROM DUAL UNION ALL
  SELECT 51 MAX_VAL FROM DUAL UNION ALL
  SELECT 67 MAX_VAL FROM DUAL UNION ALL
  SELECT 76 MAX_VAL FROM DUAL
  )
  SELECT ID
       , MIN_VAL
       , MAX_VAL
    FROM DT1
       , DT2

  expected result
  --------------------
  ID  MIN_VAL  MAX_VAL
  A         3       21
  B        25       51
  C        55       76

  Kind regards

  Using the analytical function LEAD:

  SQL> WITH DT1 AS
    2  (
    3  SELECT 'A' ID,  3 MIN_VAL FROM DUAL UNION ALL
    4  SELECT 'B' ID, 25 MIN_VAL FROM DUAL UNION ALL
    5  SELECT 'C' ID, 55 MIN_VAL FROM DUAL
    6  ),
    7  DT2 AS
    8  (
    9  SELECT 21 MAX_VAL FROM DUAL UNION ALL
   10  SELECT 37 MAX_VAL FROM DUAL UNION ALL
   11  SELECT 41 MAX_VAL FROM DUAL UNION ALL
   12  SELECT 51 MAX_VAL FROM DUAL UNION ALL
   13  SELECT 67 MAX_VAL FROM DUAL UNION ALL
   14  SELECT 76 MAX_VAL FROM DUAL
   15  )
   16  SELECT ID, MIN_VAL, (select max(max_val)
   17                         from DT2
   18                        where max_val
  

  Max
  [My Italian blog Oracle | http://oracleitalia.wordpress.com/2010/01/07/creare-documenti-office-da-plsql/]

• How can we detect the action of "clicking outside of the dialog box"?

  When we have a modal dialog box, click outside of the dialog, its parent window, for example, how this action event can be detected? I want to implement certain actions in response to this event. Thank you!

  Here are some ideas for further research:

  You can first in the stage variable parent in the dialog box and then attach to events 'touch' here:

  scene.setOnMouseClicked (myDialog.mouseHandler,

  scene.setOnTouchReleased (myDialgog.touchHandler

  But it can work only if the dialog box is directly on top of the scene of the mother.

  If the dialog box is outside parent in any part you will probably need to work with the operating system.

  In windows, you will need to call some functions search for win32 if ' use java call win32 functions.

  Or, you can write a windows program that listens to the operating system event queue, then tcp to your dialog box.

  Many search results obtained: windows - how the message queue works in Win32 - stack overflow

  But then if your mac or Linux,...

• Validate a field with the minimum and maximum values

  How can I register a form in Livecycle designer?

  http://www.java2s.com/code/JavaScript/form-control/Validateaninputfieldwithminimumandmaxim umvalues.htm

  Can someone help me with a sample?

  Just replied to your other thread.

  Paul

• How can I change default digital and enum values in a Cluster of Def Type Strict?

  I have a Strict Type Def cluster that contains 10 digital controls and a number of enums.  I have changed the default values for the digital controls in the strict Type Def, in customize mode, carried out a 'course values Default do' and did a 'apply changes' and recorded.

  This group is used in various places throughout the project and have not found a way to make the default cluster values change downstream.  Strict control Type (STD) Def seems to have good values on the front panel.  But if I place an instance of this on a white façade and do pass a wire of him in the block diagram with a probe and an indicator, I still get the old default values being passed against the STD.

  and still another approach is mentioned in my nugget on definitions of types found here, where I include this picture

  

  To illustrate how a wrapper around the constant type-def avoids not only the "problem of the explostion" (largely set by the new LV 2011 for display as icon feature) can be used to set the defaults AND allow some documents explain what, where and why.

  Ben

• IMAQ statistics block - minimum and maximum value giving 0

  Guy - can someone please test. Average and standard deviation give good numbers.  Min and Max are the two display zero (0).

  Thank you

  Don

  Do the Boolean calculate Min/Max? true to get Min and Max values.

• How can I uninstall or repair and I HID Non-User Input data filter?

  (He was installed by windows update & failed because the "fatal error", it continualy attempts to install start-up & fails.) There NOW in some SORT NOW picked UP MY wireless keyboard Microsoft THAT DO WORK MORE, AS THE PROGRAM CACHE IS DEFECTIVE!  When I stop & reboot, the KEYBOARD is NON-OPERATIONAL & I can't GET THE PIN TO LOGON! In desperation I dug an old logitech keyboard and eventually be able to log on to come here for HELP, someone please. Sorry for the cries of joy, (capitals), but I had a full head of hair when I started but I'm now almost bald!
  Brian McGDR

  Hi BrianMcGDR,

  1. When you are unable to install the Microsoft HID Non-User Input update data filter?

  2. What is the full error message you received during the installation of this update?

  3. do you have security software installed on the computer?

  4. What is the model number of the keyboard? What happens when you try to connect the keyboard to the computer?

  The update of the Microsoft HID Non-User Input data filter must be installed if you experience the problem that is mentioned in the Microsoft article below.

  The screen saver does not start after the installation of a wireless pointing device

  http://support.Microsoft.com/kb/913405

  I suggest that you download and install the latest drivers for keyboard, check if it helps.

  http://www.Microsoft.com/hardware/en-us/downloads

  See the update history for the exact error for failure put up-to-date and after return with details.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

• How can I detect the end of HTML5 video and do something?

  var vid = sym.$("Holder");

  vid.html (' < video width = "720" height = "405" id = "myVideo" src ="http://content.jwplatform.com/videos/GwRORsk1-gBf37dJ7.mp4" type = controls video/mp4 = "orders" autoplay = "autoplay" < / video > ');

  I have this in a trigger on the chronology of the scene, you could have all this code in a trigger, or composition ready or complete creative... depends on when you want to play video I guess?

  To hide the video, you can simply use. hide();

  My code looks like this;

  var vid = sym.$('rectangle_video_housing');
  VID.html ("');

  var vidEnd = $(vid) .children () such ();
  .bind $ ('complete', function () (vidEnd)
  {
  VID. Hide();
  });

• DAQmx custom scale: How do you define minimum and MAXIMUM values?

  Hello everyone,

  I am currently using LabVIEW 2010 and meet the following problem with DAQmx custom scale: first, I created a custom linear scale (ordered originally = 0, slope = 50) and then a string that uses this scale. The real signal acquired from a NOR-9205 (module I) is in the order of-8 / + 8 Volts; When I try to read the measurement of the chain, it seems saturated.

  I discovered that the change HAVE. Max and the AI. Min by a DAQmx channel property node I can improve the situation, but the fact is: I was not able to define a range of-1000 / + 1000 for instance because it exceeds the maximum allowed, and I get an error!

  So, it is the custom to scale?

  No one knows how to fix?

  It seems not to be any possibility of having a large scale factor! If I want to convert 1V 1000V I will never reach it!

  Thank you much for the help.

  B.

  Hello

  The custom scale will be the function that converts the voltage to some units, you can.  If you use a linear scale, it is in the form:

  Data units user = m * wine + b

  where m is the slope and b is the intercept at the origin wine is what happens to the analog input channel.

  The MIN and MAX define you are the min and min AFTER the scaling.  So if you want 1 volt in Ain channel to appear as 1000 in the code, you:

  m = 1000, b = 0

  Then your MAX and MIN is limited to-10000 and 10000 when DID channel lies between +-10V.  By selecting a MAX or MIN outside this range will cause an error and numbers read apart from this will be so much saturation.

  9205 a selectable ranges: ±200 mV, ± 1, ± 5 and ±10 V programmable input ranges.   I haven't used the 9205 so I don't know if this range is automatically selected or the user defined in the module preferences.   Whatever it is, it will have a possible effect that MAX and MIN are.

  For example.

  If you did what you said and used slope = 50 and intercept = 0 AND you got the system set to ±10 volts, while the MAXIMUM and minimum that you can set are limited to ±50 * 10 = ±500.   So if you try to put a maximum of 1000 in there, you will get an error because it needs to be at + 500 to-500.   Your saturation occur at ±10 volts (what is scale ±500)

  If the interval is set to +-1 volt, your MAX and MIN should be within-50 to + 50.  All values apart from this will produce errors.  and if you try to read voltages above + 1 volt (+-50 scaling), there will be saturation.

  I hope it is clear and useful.

  -Alex-

• How can I detect the shortcomings of a sequence?

  I have a very long sequence with several images in the timeline panel.

  Whenever I want to check a sequence for the movie of missing parts, I have to scroll the whole movie and see if there is no parts where there is no film or audio.

  I was wondering if there is a faster way to do this?

  As with the touch of a button, adobe says that there are no parts in the scenario without images.

  And when there is a part in the timeline with none of the images (even if it's only 2 frames) that adobe imidiatly go to this location.

  I really hope there is a way to do this, because it will save a lot of time to check.

  Post edited by: Kevin Monahan

  Sequence > go to Gap

• How can I control the NOR-5663 downconvert

  Hi, how are you doing.

  I have a NOR-5663, I want to make it as a spectrum analyzer.

  I need to deal with the problem of RF image. I work with Labview 2009.

  so I need independently control the downconvert of NOR-5663. Can I use OR - Tuner for Drevier?

  DAMA is maybe good enough for my work, like soft façade nor-DAMA, but I don't know how is it?

  Thanks for your help

  Charles

  Hello!

  You can not use NI Tuner tuner 5601 (no traditional DAQ support) but use the driver of the ACCA and use it with external digitizer option.

  hope this can help you

  see this example: http://decibel.ni.com/content/docs/DOC-1980

  concerning

• Clip stereo Audio of CS5 - how can I change the R &amp; L channels separately?

  If a clip has two R & L recorded, what is the best way to hear only a track.  I would like to manipulate the song when he's playing he's going from the right speaker to the left speaker and near return once again.

  I have CS5 Master Collection (edition of S & T)

  HP pc

  No effect controls Panel, the effect controls panel:

  

• What is the allowed minimum and maximum of ideal value for sound quality?   What units are these numbers? for example dB

  (1) what is the name of this Volume Audio monitor?

  (2) what is the ideal minimum and maximum value allowed for a sound quality?

  (3) in practice, up to what maximum value can I allow?

  (4) what are these numbers? for example dB

  Thank you.

  1. the audiometers

  2. level of reference is usually given as -12 or - 20 for the film. Normal speech level is usually 05:45.

  3. less than 0 for forts, ttransient sounds. Highly compressed music will be close to zero.

  4. the decibels