How can I determine the HP Pavilion Elite m9400f video card installed?

Similar Questions

• How can I see the information on a dedicated video card?

  Hey guys,.

  I have a laptop dv6tqe with a 1 GB GDDR5 Radeon HD 6770 M, which has a switchable graphics. the simplified ATI provided with the laptop Control Panel has all the 3D options for the process that I have chosen to activate the 'high performance' mode to use the dedicated GPU. The latest games play fine without delay, however when I shoot upward of dxdiag or any other vid collection card information software the 6770M does not appear. Only Radeon integrated graphics card running in power saving mode, even show when im all current laptop running with the high performance parameters. Is it possible to go back to information on the dedicated GPU?

  You can install Speccy below the link which is a 3rd third party tool and find this info

  http://www.Piriform.com/Speccy

  OR

  You can go to the BIOS and find this info as well. In order to load BIOS turn OFF the laptop and after power ON, keep pressing F10 to load the BIOS of the laptop screen and check system information.

• How can I determine the language of Acrobat 11.0.03 installed?

  Hello

  I work with computers equipped with different versions of Acrobat XI.

  I'm trying to get the language of Acrobat is installed in each system.

  Earlier, I used the registry key 'HKLM\SOFTWARE\Adobe\Adobe Acrobat\ < version > \Language\UI' to get the language information, but unfortunately now I get no value as «UI"under «HKLM\SOFTWARE\Adobe\Adobe Acrobat\ < version > \Language» register

  Is that mean that the installation did not correctly forward-looking language?

  And I need a key under HKLM present so long to get the language information, instead of HKCU.

  So please if someone can help me here?

  Appreciate all the help!

  On these machines, is all as well as the language of Windows Acrobat language?

• How can I determine the number of contacts that I have

  How can I determine the number of contacts that I currently have on my iphone

  I don't know of a way on the iPhone, but if you have a Mac, you can go to the Contacts (platform) app and scroll to the bottom where you will find the total.

  Same for iCloud.com on your browser, go to the app, scroll down.

• How can I determine the size of the files and photo albums?

  How can I determine the size of the files and photo albums?

  It is not really in any way, nor is it necessary-what you trying to accomplish?

  LN

• How can I determine the version of Toshiba Assist?

  How can I determine the version of attribution that is installed on my Satellite X 200 with Windows Vista Premium SP 1AA. Operating system?

  Go to the control panel and start the option programs and features.
  After full load, you will find listed Toshiba Assist it.
  Click on it and on the bottom, you will find information about the version of publisher, size and product.

• How can I update the expiration date on my credit card account?

  How can I update the expiration date on my credit card account?

  How can I update the expiration date on my credit card account?

  Go to your Bank and get a new card.

• I've lost all my acrobat adobe Pro XI files during a reinstallation of win7.  How can I get the news I need to download and install Adobe Acrobat XI Pro?

  I've lost all my acrobat adobe Pro XI files during a reinstallation of win7.  How can I get the news I need to download and install Adobe Acrobat XI Pro?

  [Read https://forums.adobe.com/docs/DOC-7273]
  [Ask in the correct forum allows... Left the connections for specific program forum forum... MOD]
  

  https://Accounts.adobe.com/ , then click on Plans & products above to find a list of your programs and your serial numbers

• How can I solve the error 16 when I try to install a program?

  How can I solve the error 16 when I try to install a program?

  In Adobe Creative Suite or Adobe Creative Cloud configuration error

• How can I set the DSO AU to 8 MB during install/config grid Infrastructure?

  Hello
  
  How can I set the DSO AU to 8 MB during install/config grid Infrastructure? Storage installer screens do not have the ability to set a caliber of more big to ASM when creating initial DATA DG, just go with the value defaults to THE (1 MB). Our SAN provider did studies and for ASM a framework to THE 8 MB instead of the default 1 MB will give better performance. Is there a template that I can change preinstall so the installer will create the DG with a frame of 8 MB DATA?
  
  
  Thank you
  Tom

  Hello

  You can not change it to the default diskgroup created during installation of GI.

  Only option you have is to make an installation by default, create a new diskgroup and move all the files needed.
  If you can read German see here for a tip on how to do it:

  http://www.Oracle.com/WebFolder/technetwork/de/community/dbadmin/tipps/asm_dg_change/index.html

  Concerning
  Sebastian

• How can I determine the model of my air to buy a new drive if my oem drive failed?

  My air drive is dead and I need to order a new drive.  How can I determine my air without the drive model?

  Thank you

  C

  I guess you could always turn inside and read the model number is printed on the bottom...

• Error-50352 DAQmx: How can I determine the maximum size of the buffer?

  I use a card PCI-6259 with DAQmx (version 9.0.2) library and I get the error "-50352: memory cannot be allocated" whenever I try to make my record too long. Here are a few terms that I found:

  1 channel of AI, 1Msample/s: 7.71 sec max

  1 channel AO, 1Msample/s: 7.71 sec max

  1 channel of AI, 500ksample/s: 15,4 sec max

  2 channels of AI, 500ksample/s: 7.71 sec max

  1 HAVE, AO, 1Msample/s 1-channel: 5.6 sec max

  IF I can't acquire more 7.71 Msamples in a single task, be it in most cases, or AO. When you mix tasks HAVE and AO, this limit seems to be decreasing. This happens with a freshly started application, so I don't think that it is a question of compensation task.

  What is a physical boundary with the device? (And if so, how can I determine this limit?)

  My impression is that the device uses DMA to transfer samples to the system memory, which there are plenty - I can easily allocate more than 400 MB of contiguous memory in the same application.

  Hi Luke,.

  The amount of RAM your system installed?

  What operating system do you use? If it is a 32-bit operating system, using 3 GB or increaseuserva? These parameters have a compromise: they reduce the size of the kernel virtual address space. This increases the probability of DAQmx will succeed to allocate memory but do not reach the mapping in the kernel virtual address space.

  Your system has all the devices with very large memory mapped I/O beaches, such as a video card with a large amount of memory on-board? On a 32-bit operating system, this can reduce the size of the virtual address space of the nucleus by a significant amount.

  Brad

• How can I determine the RAM bus speed?

  Hello

  I installed the new 4 GB RAM replacing the previously installed 3 GB of RAM. The previous 3 GB of RAM has the 667 MHz bus speed (I found it in the user manual). The new 4 GB of RAM, the seller told me that has the 800 MHz bus speed. Now, I want to be sure that the seller does not deceive me, and he gave me the speed of 800 MHz RAM bus. How can I determine my installed RAM bus speed? My system configuration is the following:

  Windows 7 Ultimate 64 bit

  2.1 GHz Core2Duo

  4 GB OF DDR2 RAM

  Intel GMA 4500MHD

  Model: Acer Aspire 5738

  I have two modules of DDR2 soDIMM, previously, I had a 1 GB DDR2 667 MHz + a 2 GB DDR2 667 MHz RAM = 3 GB DDR2 667 MHz RAM (in my manual of the system provided by Acer)

  Now, after replacing, I have two 2 GB DDR2 800 MHz RAM = 4GBD DDR2 800 MHz RAM (as the salesman told me and I saw written in the package when he was unpacking and installation)

  How can I determine my RAM bus speed and be confirm that I really learned the 800 MHz? Please someone help me with this. Thank you.

  Four ways I see real quick:
  1 - the label on the RAM (assuming that it is there, and this truct you he has not changed it).
  2 - install the CPU-Z.  It will be listed in the memory tab.
  3 - install Belarc Advisor.  It also lists only (as well as much more information on the system.)
  4 take a look at the POSITION of the screen when the system boots - he must view RAM info.

  All the foregoing, guess however that isn't only MHz 800 RAM installed, but that the system is actuallyrunning at 800 MHz.
  Here, CPU - Z is the best choice, because it will give you the actual manufacturer for RAM; You can use it to find the specifications of the manufacturer.

  HTH,
  Chris

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How can you determine the absolute path to a NetStream object created dynamically?

  We strive to implement a video captioning with a freeware component, ccforflash. This requires us to provide an absolute path or relative to our NetStream. How can we determine this path in Flash CS5 AS3?

  CCforFlashCS5 documentation:

  2. objects "name and path.

  Type the name and the path.  It is the name of the instance of the object with which CCforFlashAS3 will synchronize. It must be spelled correctly, since CCforFlashAS3 queries the object with this name for the synchronization information to synchronize subtitles. The path must also be included; be compared to the CCforFlashAS3 (i.e. this.parent) component or the absolute path of the main floor of the film (root)".

  I guess I understand your problem and accepts only a great way to identify a path to something compared to doing AS3 AS2.  I'll see if I can raise the interest of someone else in your ad that is a detective better than me.

  But if I can get stoopid for one minute and suggest trying something (I would try it)... If you have access to the code where is instantiated the NetStream object, just after he is given life, assign the instance to a variable, you have in the main timeline and use this variable (and the root timeline or a 'this' - reference database for path requirement) for your CCforFlashCS5 needs.

• How can I determine the type of image to be used before loading an image?

  I'm developing an application using VB 2005 which measures two 8-bit or 16-bit image files. When I saw the picture, I find that I have to set the type of image the image buffer before playback of the image in it. For example, if I read a 16-bit image in a buffer of 8 bits, the image is truncated. I guess I could read the image in a 16-bit buffer and retype it if the pixel values are less than 255.

  Is there a better way to do it? Can I determine the number of bits of an image before loading in a buffer?

  Thank you!

  Hi Steverino,

  Olivia is incorrect... VDM has a function called GetFileInfo which does just what you want. It only reads the header of the image but does not load the entire image in memory. It will give you various properties such as the bit depth.

  I think that on the new .NET support, there can exist here: NationalInstruments.Vision.Analysis.Algorithms.GetFileInformation.

  Thanks to the ICB and our legacy of .NET support, it's probably a similar name.

  Eric