How can I draw Vs relative hourly?

Hi, I use PSC-HAVE-100 read through my system and determine if the current is higher than the ideal value. Using the field point I was able to achieve the current reading; However, I would also like to display the current time. If I want to display the current in the value axis and the time (in seconds from scratch) on the x-axis so I not see the change of current (dI/dt).

I tried to use the scope of OR, but it does not work as I thought it would be. Any suggestions?

Thank you

Guillermo

Nevermind, I was able to display the current time of vs

I used a waveform graph connected to my source instead, and it displays the values in real time.

Tags: NI Hardware

Similar Questions

  • How can I draw the intensity in real time of a picture in time real (imaq 1394)?

    I have a firewire camera.

    I hooked up my camera to my pc with labview and now I display image in real time. How can I draw the intensity of a region dependent on time?
    Y - intensity
    X - time... I would watch the variaions real-time intensity...

    Thanks in advance

    The light meter example is pretty much what you want to do. It is located here:

    \National Instruments\\examples\Vision\2. Functions\Light Meter\Light meter Example.llb\Light meter Example.vi

    In the example, the x axis are the number of iteration, but it is easy to modify to use a graphic instead of a graph and chart the time instead.

    Hope that helps.

    Christophe

  • How can I keep a 3 hour video on a DVD + R in 4 hours (8.5 GB)?

    How can I keep a 3 hour video (less than 2 GB) on a DVD + R in 4 hours (8.5 GB)?
    It seems unreasonable, how the creation of DVD Windows says that it does not so technically it should.
    What can I do with the creation of DVD I have now?
    Or is there a newer, more efficient program version?

    First... you asked "How can I keep a 3 hour video. OK... you say you
    I would just create a DVD of data for backup purposes? Or you want to
    create a video DVD that will play in a free-standing DVD player like a movie?

    If the data DVD is the purpose... DVD Maker is the misapplication... try CDBurnerXP:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Download CDBurnerXP
    http://CDBurnerXP.se/download.php
    (works on XP / Vista / 7)

    Sorry, but I have to ask... does your DVD burner double layer DVD
    and DVD Maker acknowledges that you use a double layer DVD?

    If the DVD-video is the goal... the following freeware must complete the task:

    (FWIW) It's always a good idea to create a system
    Restore point before installing software or updates)

    DVD Flick
    http://www.videohelp.com/tools/DVD_Flick
    (the download is: "dvdflick_setup_1.3.0.7.exe")
    (Mirror download (direct link) is the fastest)

  • How can I draw a line around the edge of a piece of property that I shot a video clip of 13 elements?

    How can I draw a line around the edge of a piece of real estate in a video clip with 13 elements?

    KING OF THE SKY

    First 13 items on what operating system? Have you updated 13 to 13.1 still using Help Menu/updates to date of an open project?

    Your question immediately... you could try something like this

    In this scenario, you start with your video on video 1 track with the Timeline indicator placed in the appropriate location of content timeline.

    The Titler line file created will be automatically placed at the position of the indicator in the timeline.

    Text Menu/New/default of titration / and select the Section forms.

    The Titler file goes to Video Track 2 above the video on the video 1 track.

    Select the line tool in the section shapes and draw your line on screen correspond to the where you want it to appear in the video below.

    Your image of the line is the line on transparent background where the content below shows through the transparent areas in this image of the line.

    Please consider. If any questions or need any clarification on the above, do not hesitate to ask.

    Thank you.

    RTA

  • How can I draw a curved line?

    Sorry for the inconvenience, but I tried the Photoshop information and could not succeed.

    What should I do to draw a curve?  I have no problem, draw a straight line, it's pretty easy, but I was not able to find a way draw curves and get the same results to draw a straight line.  I tried to work with the Pen tool and I could draw some curved paths, but as I said that a path is something abstract, I can't work with it as a stright line.  I m pretty sure that the answer is simple, but I was not able to understand.  Can someone help me please?

    Howdy.

    But, how can I caress a path?

    To create your path, click on the button "Create a new path", second from right at the bottom of the garbage can. Select the pen tool. Draw your way. Click on the small triangle at the top right (highlighted). Select the path of the path.

    Select an option for how you want to stroke the path. I chose the brush. Brush properties are applied to the way such as a stroke.

    That's all. It will be useful.

    Peace,

    Lee

    PS: Semaphoric: did not know the shortcut. Thanks for the tip.

  • In the image control, how can I draw a small picture with a specific offset within a larger image?

    I could use the opposite of 'Get Image Subset.vi', as a 'Set Image Subset.vi'.

    The function of "draw flattened Pixmap" would work if it would let me define the position of the target instead of the position of the source.

    You can use "draw no flattened Pixmap.vi. Here is an example:

  • How can I draw a grid of n by n (for example...) 18 by 18) in a rectangle, I drew?

    I drew a simple rectangle (square in fact), and I want to grid in squares of size.  How can I do this in photoshop?  I have access to CS 5.1.  Thank you

    Chris

    Hi Chris,

    In fact, this can become a complex process. A simple a quick way to do this is to use the grid view in Photoshop.

    Open your image and go to view > Show > grid.

    If you need to sharpen the divisions and the dimensions of the grid, you can go to Photoshop > Preferences > Guides, grids, and slices. This will allow you to designate the size of the grid to align with the dimenstions of your image and the divisions you want to create. It can take a little tweaking and some math to get the divisions aligned exactly on your image. Alternatively, you can resize your image to align with the grid.

    Then, take the line tool from the toolbar. If you don't, it could be hiding under another form tool - you can get it by clicking and holding the shape tool icon.

    Now you can zoom in on your canvas and start "trace" on the lines of the grid on a new layer. As you click and drag the line tool, hold Shift on your keyboard to create perfectly straight lines. You can change the color and STROKE of the size of your line using the settings in the tool menu line at the top of your screen.

    Once you are done with the tracing on the grid lines, go to the show > view > grid to disable the grid. Now, your image must have an evenly spaced grid 'placed' on it.

    There is another method to add a grid on an image in which you create a template and superimposed directly on the image, but it's a little bit more complicated. The advantage of the method above is the grid that you created is a vector, which means that you can resize it if necessary, something the method works well for.

    I hope this helped, if you have any questions or encounter problems with this method, thanks for posting here again.

    Good luck!

  • How can I draw in straight lines in CS3?

    I would use pencil so I can freely draw straight lines to make any kind of shape, just like the screen below. As we shift on Photoshop and using the pencil holding. Is there another way to do it?

    This was made using a rectangle and anchor point, but it's a pain to do!

    Sem título.jpg

    Thank you

    I think you want the pen tool. If you click on a point, then another while to now shift, it will draw straight lines to 90 or 45 degrees. You should be able to do what you want in this way by clicking on each corner quickly, while now shift.

    To close your box, click again on the first anchor point. (He likely to change to a circle to indicate that you are going to close the path).

  • How can I draw dynamic data that I get a hardware DAQ against each other?

    Hi all

    I am trying to acquire voltage and current data of DAQ hardware. My goal is plotted against votlagein current a continuous path. As the votlage is increased at intervals of 1 Volt, every second I want to see how the current. However, this data is dynamic and I need help find how to draw in a single chart. Any thoughts on how to draw the two different dynamic data against each other in the same graph?

    You help will be very appreciated.

    Thank you

    If I understand what you're saying, looks like you want to have the update of XY graph with each new data point (or points) acquired, but also choose to keep the previous data on the XY graph.  If that's what you're after, I build on my previous example.  For the method of use of the express VI build XY graph, you can simply double click on it and uncheck the "erase data on each call.  For the other method of construction of the dashboard cluster, you will need to add a few records to offset to maintain the previous itterations table values.  Here's the updated image:

  • How can I draw this arc in artificial intelligence?

    Hello

    I am a beginner and I try to rebuild this image in artificial intelligence. But I have no idea how to draw arcs. And

    I have less idea of how to draw a bow such unregular.

    Can someone help me please?

    THX

    muster.jpg

    You can use the pen tool to draw directly:

    Or you can use the Pathfinder palette to subtract an ellipse from a rectangle:

  • Help: How can I draw a dotted with a pointed end for each dashboard?

    I'm drawing a dotted wherein each dash has a pointed end to indicate the direction. Therefore, each dashboard should look like below.  I tried this every way using the tools related dashed but that you do not find a way. Can someone provide a simple solution please?

    Thank you, John

    dashed arrow.JPG

    Draw your shape. drag it from the palette shapes. make a brush model.

  • How can I draw a reverse cloud in Adobe Reader?

    Hello

    I use Adobe Reader XI and I must insert a cloud of hold on my document to pdf, but when I use the command "Fire cloud" in drawing annotations there doesn't seem to be an option to reverse the direction of the cloud.

    I know, it should be possible somehow (I saw copies of examples), but the person who made it is no longer with the company and no one else seems to know.

    Advice would be appreciated, thanks.

    How would you do it in Acrobat? Even if you move the points of the cloud (which you can do in Reader as well, by the way), the directionality of the 'clouds' remains the same. I don't see a way you can reverse the trend, not in Acrobat Reader.

  • How can I draw several plots by using the XY graph during execution?

    Hello

    I want to draw several plots in the graph XY to the means of execution user will select the number of plots that he wants to draw, depending on this value, I have to get these values and use table generation and then I give to graph XY.

    During execution, but how to do this?

    Please help me in this regard.

    Kind regards

    Herald

    Why start a new thread?

  • How can I draw a line at 40 ° c in windows7 paint

    Hello

    I use the part of Paint in Windows 7 and I would like to know if I can draw lines with angles varoiuse 30 and 60 degrees

    Best regards, Nigel Terry

    Unfortunately, the painting doesn't have this feature.

    The best we can do would be to select the grid and the leaders of the view tab, in the paint can use base for a right triangle trigonometry - see:

    Trigonometric functions (Wikipedia) .

    The foregoing would be very tedious, time-consuming and probably too imprecise.

    A better option would be to seek a 3rd part of the program, possibly a design (CAD) program assisted by computer. You will need to consider as you know what exactly it is you are trying to reach.

  • How can I draw in a pdf document?

    Im a teacher and I receive my homework to students as pdf files. And I want to be able to draw in these files, my students writing notes. Since I'm a math teacher, I would like to be able to write a mathematical notation and make explanatory drawings for my students.

    So my question is: is it possible to draw in a pdf document? Im not asking if I can insert a drawing or a picture, but actually draw directly into the document.

    The drawing tool is not that easy to use and it has not discussed by Adobe. When you try to write for example, it will often change to a selection of what you drew rather than allow you dot an "i" or cross a "t". If you find that this is a problem, the alternative for number of educators is PDF Annotator. I don't like ad another product here, but it's a question that does not respond to Adobe. There you can write and draw your level of desire without this issue of future selection. However, he is unable to do much more.

    If you are looking to buy Acrobat for special needs, be sure to check pricing for educational use (products).

    Looks like you may reflected on the drive and not the full Acrobat. In Acrobat, the drawing tools are under the comments.

Maybe you are looking for