How can I dynamically select the shared Variable API programming data type?

Similar Questions

• How can I dynamically change the scale of an AIChannel, while the task is running?

  I would like to change the scale of an AIChannel while the task is running.

  Is this possible? How can I do?

  Hi Michael,

  I don't think that this is possible.  If you need this capability, I would acquire the raw tension and applying your own scaling on the set of data as being treatment.

  Kind regards

• How can I dynamically control the sound

  Hello
  In the header part of my site, I have included a flash with sound, it plays automatically when the page is loaded, if I stop the sound in homepage, it plays the sound, when I go to another page. I want to play the sound continuously, even if the pages are loaded. How can I solve this problem?

  The problem is that the whole page reloads when you click on a button.
  My suggestion would be to frameset to load separate pages in a separate frame navigation. This should keep the music played on all pages as navigation charges ever.
  Also, I noticed that there is no way to start playing the sound again after you stop it once.

• How can I dynamically change the Format of Date of Application?

  Hello world...
  
  In my application (v 3.2) I let the user set the date format of app dynamically by a "preference" value, they can change on the road.
  I then take the format they take and affect their value (ie: ME-DD-YYYY) and pad "Hh: mi" for it and use it as the PICK_DATE_FORMAT_MASK that works very well for most of the selectors of dates.
  
  The problem I have is that some date picker, I use the application does not require the hh: mi, they need just the part of ME-DD-YYYY. I could use the NLS_DATE_FORMAT for this? I may be able to use the selectors of dates with the "format of date of application use? It doesn't seem to work for me.
  
  In other words, I need essentially 2 date formats for my selectors of application dates; 1 for just the dates and 1 for dates, including time. And these 2 formats are selected by the user by setting a preference of app dynamically at run time.
  
  Not sure if I feel here... any idea?
  
  Thank you!
  François

  You must use the element of the application in the installation of your application, so when you select in your control, you would use the date format of application level. You can change the level application through code or control element.

  Thank you

  Tony Miller
  Webster, TX

• ADF Faces: How can I dynamically get the URL of the request?

  Hi all
  
  I have a reportservlet mapped in my web.xml and click on an af:commandbutton, a navigation of the dialog occurs a separate page with the following code:
  
  <! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional / / IN".
  "http://www.w3.org/TR/html4/loose.dtd" >
  < % @ page contentType="text/html;charset=windows-1252"% >
  < % @ taglib uri prefix = "http://java.sun.com/jsf/core' = 'f' % >
  < f: view >
  < html >
  < head >
  < meta http-equiv = "Content-Type".
  Content = text/html"; charset = windows-1252 "/ >"
  < title > SAE report < /title >
  < / head >
  < body >
  
  < name of the form = "form1" method = "post" action = "" * http://ourserver.acme.org/AcmeApplication/reportservlet * "target ="_self">"
  
  < script language = "JavaScript" type = "text/javascript" >
  document.getElementById('form1').submit ();
  < /script >
  
  < / form > < / body >
  < / html >
  < / f: view >
  
  This code works fine but the problem is deployable on multiple servers of different applications and we need to manually change the part "http://ourserver.acme.org" to match the server. Is there a way to dynamically obtain this value without hand this url every time we do a deployment of coding?
  
  Thank you very much
  Wes

  Hello

  If the report server is installed n the same host, would be

  work?

  Frank

• How can I permanently remove the PUP 'Pass Show' program?

  I get these annoying links that are double-underlined in my browser web-sites. I disabled the add-on to show. I uninstalled the program Pass show using the XP Control Panel and reset Firefox in the menu troubleshooting but pass links show double underlined keep appearing.

  Hello Cathy, when you have it now, could you Firefox > help > troubleshooting information, copy his exact name, version, and the id of the list it and paste it here in a forum response - this could allow Mozilla to take further measures in this regard.

  Then, please run a full scan of your system with security tools like the free version of malwarebytes & adwcleaner.

  Fix Firefox problems caused by malicious software

• Can I send value cluster through the shared variable?

  Hi every1,

  I want to send a cluster through the shared variable. While creating a shared variable, there are options to choose the type of data, but there is no option to Cluster.

  But there is an option of "custom control". How to use it?

  Hi, Germain,.

  Create your control and save it as a file on your disk *.ctl. If you use the "custom control" option, and then select your control. If this does not work for your control, you can use the function 'flatten in string' to send a string.

  Mike

• How can I print only the part selected a page?

  When I highlite prints part of the entire page. How can I print only the part selected page?

  Try:

  Highlite your text

  Press CTRL + P to start the print menu

  "All" is selected by default in the scope . Change it by selecting 'selection ', and then click OK.

  This example shows only the text that is selected. Microsoft® Security MVP, 2004-2009

• How can I remove selected Custom view (s) of the event viewer Console tree?

  I looked at the MMC Help on create and manage custom views.

  I can't find a way to remove the custom filter views in the Console tree, which can be found on the left side of the event viewer.

  How can I remove selected Custom view (s) when they serve no more values?

  Problem solved

  I asked this question because I was unable to see what was going on in the event viewer and I couldn't find help in mmc HTML Help. However, now I see what's happening and I can give you a solution to my own question.

  Cause

  If I connect to the computer as a user with administrator privileges, I am able to use the event viewer to create a custom view filter that can be used by all users who have access to the event viewer. If I fix remove a view filter custom Console tree, I can't delete it unless I'm logged in as the user who created it.

  Solution

  1. Log the computer as the user who created the custom view.
  2. Start Event Viewer
  3. Use the right-click of the mouse on a custom view filter selected in the Console tree, open the drop down menu.
  4. Delete appears fourth in the bottom of the menu if and only if you are logged on as the user who created this view.
  5. Select Remove to remove the filter to custom view.

  If Delete does not appear in the drop-down menu, then it may not possible you connect as the user who created the custom view.

• How can we dynamically open an external URl of the page of the OFA

  Hi team
  Hello, how can we dynamically open an external URl of the page of the OFA
  For example: my datas table DB are like that

  Employee no       Url
  1     https://www.google.co.in/
  2     https://www.facebook.com/
  3     https://www.yahoomail.com/

  When I don't ask used no 1 of my Search Page
  In the result of my search page table, I get
  1 https://www.google.co.in/
  NOTE: Here item URL is type bean link when I click on the link it should open google page in separate browser
  At the same time, when I question used no 2 which is shown below, then it should open facebook page in a separate browser.
  2 https://www.facebook.com/
  
  When I try this
  Destination URI - https://www.google.co.in/
  It opens no separate browser, but for employees don't I question as open 1,2,3 only the same page of google in the separate browser for everyone, it is static, I want to dynamically open the URL depend on my employee to query no. If I query emp No 2 it must open facebook page this is my requirement. How can I pass the URL as a parameter?
  
  Please share your knowledge and experience and your advice my on this issue
  How can I complete my task
  I hope that my requirement is clear, if not please let me know I explained more anyway :)
  
  Is it Possible to achieve this OAF Page
  Thank you for all your suggestions on this
  Thanks in advance
  
  A.T. :)

  .findIndexedChildRecursive ("ResultTable");

  Here, you should have the exact itrm link id and not the region containing the lino

  Would it be more likely ImagePath I think ResultTable corresponds to the id of the table of search results

• How can I dynamically load swc files using as3? (without relying on the Flash IDE).

  How can I dynamically load swc files using as3? (without relying on the Flash IDE).

  The SWF file can be used in the same way as the CFC, which means that you don't need to "visually show" anything when it is loaded. Your code can use the classes and assets incorporated into the SWF, just as a SWC file. So if someone just to load the SWF file to see what was in it that they see nothing. They could however access programmatically to what anyone on the inside just like you, if they went to that level. But it is not as easy as just racing as SWF to see what is inside.

  I hope that all packaging several separate sovereigns will allow you to load and unload only what you need to keep the RAM usage as low as possible with a minimum load SWF.

  If you are ready, please mark all useful/correct so we can filter without response. You're welcome and good luck!

• How can I start using the netsh wlan command line ICS (microsoft virtual card)?

  I am using windows 7 Home premium SP1.

  I tried everything, but I can't able to start ICS?

  whenever I try, its gives me the error each time.

  give me any suggestions?

  Thank you.

  Hi JL,.

  You can start ICS (Internet Connection Sharing) / create a hosted in Windows 7 with Netsh wireless network by using the following command after you have enabled the functionality of Windows 7 (ICS, Internet Connection Sharing) network load balancing.

  How can I get a command prompt?

  http://Windows.Microsoft.com/en-us/Windows/command-prompt-FAQ#1TC=Windows-7

  Open the window network connections , right click on network adapter connected to the Internet and select Properties. Then select the sharing tab, check Allow other network users to connect through this computer's Internet connection, pick Microsoft Virtual WiFi Miniport Adapter network connection name in the drop-down list and click OK.

  Once you open command line successfully, you can run the following commands.

  Define the details of the network:

  netsh wlan set hostednetwork mode = allow ssid = YourVirtualNetworkName key = YourNetworkPassword

  Start the wireless hosted network:

  netsh wlan start hostednetwork

  To see details of hosted wireless network, including the MAC addresses of the users connected:

  netsh wlan show hostednetwork

  Let us know the status of the issue.

• How can I turn off the "always off-line" property on a specific folder or share?

  Hi, I use Windows 8 on two machines with a home group. On the smaller machine, I use Sync Center to keep an offline copy of some of the files that are stored on the big machine. I can then work on those out-of-home and sync when I come back. I do not use the cloud, just the home network.

  I can choose any folder and ask to be "always available offline". It works very well. But I can't turn this setting off. The cache on the smaller machine becomes too full so I want to selectively remove some of the files of it.

  I tried the following none of which:

  (1) in the file Explorer, right-click on the file and look at the context menu. There is no other choice "make always available online.
  (2) even again and look at the properties. There is a checkbox indicating "always available offline" and it is not gray - but it won't let me click on it. So I can't remove the tick from the box
  (3) in the file Explorer, select the file, and in the tab "Home" watching 'Easy Access'. The "always online" option is grayed out.

  No experience with this problem? It doesn't seem to appear in google searches

  Hi and thanks
  the problem seems to have "solved itself" and I will describe below the steps that I actually took.
  But first, just to clarify, this isn't (I think) a problem of skydrive, unless the policies and procedures of caching are the same regarding networked files (which I'd be interested to hear about). I'm not using skydrive. I'm just a home group in which wholesale laptop has two 500 GB drives and small laptop has a 250 GB drive. Great hosts of all mobile files for the House and a small laptop computer via a homegroup. Both machines are running Windows 8. I have improved in December to 8.1 and then is a complete Windows 8 resettlement, so that they are both pretty clean.

  "Access all offline files" is turned off on both machines, and all actions are defined to allow network users to decide which files they want to store online (I think this is the default)

  Just to complete the picture, it is the only user on each machine, which has administrative privileges on this computer.

  When away from home, small laptop can continue to use the shared files because while that connected small laptop, I mark it as "always available offline". Then when I come home, I just sync (with the network, not with SkyDrive shares). However, I have to do this selectively, because there is not enough room for all of them. So I just keep offline files copies I'll work on all away, about 34Gb.

  This solution is fine for me, I don't really have a use for Sky Drive yet.

  The problem is that while I can turn on "keep a copy offline" selectively, I couldn't turn off selectively. If one day I put a huge folder by mistake to be readable while offline and then discovered that offline files had gobbled up space on the drive of the laptop little almost all the. But I couldn't pass this backrest to remove from the cache offline files. The relevant menu options were all grayed out.

  In the world stopping or disabling 'offline files' did not help, because as soon as I have reactivated the, small laptop "remember" what she should be cached. I guess I could have reduced the cache space something much smaller, but then what I would do is remove the functionality that I needed because Sync would fall on complain there is not enough room.

  When I searched on the web, I found that it was possible in Windows 7 to reset the cache, by adding an extra key in the registry (see, for example, http://support.microsoft.com/kb/230738/en-us).

  But this doesn't seem to work in Windows 8 (see http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/how-to-re-initialize-the-offline-files-cache-and/9e785cc9-d8ad-42fc-b772-36ac01db18e4). So I wanted to know how to do the same trick in Windows 8

  What has worked (don't know too why) are the following steps:

  (1) the big laptop, move all the files that are used to be in the huge file in a temporary store
  (2) on big laptop, use the tab share offline on the properties of the file once - huge, to deny the user the right to keep a cache online.
  (3) make the shareable temporary store
  (3) close big laptop and restart
  (4) close the small laptop and restart
  (5) sync small computer laptop once again, making sure not to request a copy of the temporary Bank offline

  Grayed links seemed to 'wake up' and I was able to delete all cache offline except the files I wanted. But I have no idea why.

  Hope this helps someone, and I think it would be useful to publish, somewhere, a "how-to" article telling how to reset the offline files cache.

  Chiffchaff-faced apologies if the skydrive also corrects work for offline networking files.

  A

• How can I find all the plugins in the firefox browser

  HI I was wondering if I could ask a question how can I find all the installed plugins in the firefox lasted I would like to be able to know if, for example, if the shockwave plugin is updated and which version is currently installed in the firefox browser lasted.

  Thank you

  Hello Funny78, type Subject: addons in the address bar and then select plugins, add-ons manager opens and you can see the last version of the plugins (and other info), now click on the click to see if your plugins are up to date and see if it is.

  Thank you

• How can I transfer only the music I want?

  Hello.

  Our iMac iTunes is full of music for the whole family. How can I transfer only the songs I want on my iPod and my iPad?

  Second...

  When connecting from my iPad to my iMac USB cable the iPad goes into sync mode and transfers all sorts of things on the iMac and gets things from him. All I want is to transfer my music? How can I do this?

  Create your own playlists in iTunes.

  Connect your iDevice to the iMac - in the main iTunes window select your iDevice - menu drop-down upper left box located to the left of the music-movies, etc.

  You will see a list of 'Settings' for this device - select a tab and check the boxes of what content you want on your device.

  Also in the Group of settings select 'Summary' - from there, in the 'Options' section, you have a few additional items to choose from.

  MJ