How can I enlarge print? Just updated and the type is so small, now I can't read.

Similar Questions

• How to enlarge printing Web pages and e-mails currently too small.

  I have two browsers internet explore and Firefox, as well as windows vista. I loaded version 4.0.1. I just noticed that the fonts are super tiny when I print from web pages and emails. I can't say with certainty that the new version is responsible for this dysfunction. I tried to change the font type and size through your instructions in the knowledge base, without success. I need to know how I can fix this problem or direct me on how to download a previous version of Firefox to Vista.

  File > layout = scale
  
  100% is usually better

• I've just updated to the latest version and now I can not manually type in the URL. I can't get to a new page if I click on a link.

  I've just updated to the latest version of Firefox 32.0.3 today and now I can not manually type in the URL. I can't get to a new page if I click on a link. I had to use - gasp - Chrome just to get to this help page!

  I tried to restart Firefox.
  I can type (not a keyboard problem), but the browser never tries to go to URL, when I hit enter

  Any ideas?

  Thanks - kept looking around and found a rec to make a reset of Firefox. This seems to have worked.

• just updated and now have less tiles showing. Why?

  Well I've just updated to the new patch on firefox today July 3 and when I went to open a new page my tiles from 6 to 3... WHY!. a bit more there, they were 9 and went to 6 > <. How to restore the to atlest 6. like today which has become majorly annoying and these

  Firefox automatically adjusts the number of columns that match on the subject: newtab page if you adjust the width of the Firefox window or zoom the page in or out and no longer resizes thumbnails.
  The current releases do not resize the photos, but rather reduces the number of tiles to the width of the screen, so you can't see the number of columns specified via the browser.newtabpage.columns preference.
  Zoom the subject: newtab page to see more tiles.
  Make sure that you have only a single tab with the subject: newtab page open.

  You can enable/disable false browser.newtab.preload on the topic: config if you do not keep the zoom setting for the page.
  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  You can also watch this extension:

  • New tab tools: https://addons.mozilla.org/firefox/addon/new-tab-tools/

• I get a message that I don't have the latest version of Firefox. I just updated and downloaded the Beta Version 11. Why do I get this message?

  I get a message that I don't have the latest version of Firefox. I just updated and downloaded the Beta Version 11. Why do I get this message?

  The current beta version is 12 of Firefox, but if you're not a tester experienced, so it is best to stay with the current version of Firefox and uninstall the beta version.

  You can find the latest version of Firefox in all languages and for all systems operating here:

  • Firefox 11.0.x: http://www.mozilla.org/en-US/firefox/all.html

• I've just updated and I lost my reading later work and all the articles I've been saving. That's happened?

  I've just updated and I lost my reading later work and all the articles I've been saving. That's happened? I'm very unhappy about it. Help, please.

  Said its compatibility with the 4.0.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/read-it-later/

• Everything on my Hotmail and the words are too small to read. How can I make it bigger?

  Original title: HOTMAIL

  Everything on my Hotmail and the words are too small to read. How can I make it bigger?

  Have you tried the CTRL + mouse scroll wheel?

• When I click on a tile (windows8.i) screen just flicks and the program does not open what went wrong and can I fix it?

  * Original title: opening with a tile on the start menu

  When I click on a tile (windows8.i) screen just flicks and the program does not open what went wrong and can I fix it?

  (Moved to customization and ease of access)

  I thought I made the text in a link from my mistake. Here is the page: solve the problems with an app

• On Windows 8, by default, OneNote when I try to use the print option. How do I set printer as default and not in OneNote?

  When I try to use the print option. How do I set printer as default and not in OneNote? Also, when I want to print from a web page (on the Web page printing option) it goes to OneNote and not print. I have also pulled up a file saved in OneNote and selected the print option in the Menu. I selected a specific page and is nevertheless not print?

  Because your message is off-topic in the comment forum, I moved it to the forum Windows 8 "Performance and Maintenance", where it is more on the subject.

  As you watch the start page, type "default printer".  A list appears on the right side of the screen.  Tap 'settings' and 'Change the default printer' will appear on the left.  Tap it.  Your devices folder and printers opens on the desktop.  You will see that "Send to OneNote" will have a green check mark next to it.  Right click on the printer, if you have already installed it, then select "Set as default".  Close the folder.  Therefore, when printing, your printer will be the default device.

  If you have not yet installed a printer, make sure you download the latest driver for 8 compatible of Windows to the web site of the manufacturer and install the driver following the instructions of the manufacturer.  Then set the default device.

• Yesterday, I have successfully downloaded an upgrade of items 10 to 14. No problems. This morning, I downloaded an update of the 14.1 elements. Now I have nothing. How can I fix it?

  Yesterday, I have successfully downloaded an upgrade of items 10 to 14. No problems. This morning, I downloaded an update of the 14.1 elements. Now I have nothing. How can I fix it?

  Hi Christangles,

  We will be happy to help you, but before that, there are a few information such as:

  What is the exact error message/code if you found one?

  What operating system you are using the version?

  This is Photoshop Elements or Premiere Elements you use?

• I recently bought creative cloud, and after a few updates and downloads, my desk right icon now produces an empty rectangle if clicked. How to bring back my list?

  I recently bought creative cloud, and after a few updates and downloads, my desk right icon now produces an empty rectangle if clicked. How to bring back my list?

  I ended the application of uninstalling and reinstalling and that seems to have done the trick. Thanks for the help - it lead me to the right place

• I need to learn how to remove trojan my computer files and the registry.

  Original title: cleaning your pc

  I need to learn how to remove trojan my computer files and the registry. There is a financial has now attached ittibu or something. and how to remove the event source errors and all that is connected to this.

  If you make financial transactions online and feel your system has been compromised, the more experienced people will recommend wipe you your HARD drive and reinstall your XP from scratch, but that is not always possible and of course is up to you depending on how you feel about this (you need to feel good about it).

  If you still think your system may be achieved a malware, I would do these things before you start any troubleshooting effort:

  Download, install, update and do a full scan with these free malware detection programs at:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Download and run Hitman Pro here and during installation to be 100% sure to refuse the installation of toolbars, decline any e-mail options, nothing to do with Bing or MSN, perform a scan time, accept no e-mail and activate the free license:

  http://www.SurfRight.nl/en/downloads/ (make sure you get the free version)

  Download and run TDSSKiller from Kaspersky:
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  The scans by operating clean, then to solve any problems.

  If you still think that you have any questions, then proceed as follows:

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

  If you need help interpreting your logs in Event Viewer, follow these steps:

  Here is a method to display specific information about individual events.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  The most interesting newspapers are usually the system and Application logs.

  Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default settings for XP wants do not connect all this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

  If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

  Not every event is a problem, some are informational messages that things work very well, and some are warnings.

  However, no event should defy reasonable explanation.

  Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s.
  Informational messages have white is.  Not every error or warning event means that there is a serious question.

  Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

• How can I read a pdf with ebook reader Touch samo

  How can I read a pdf with ebook reader and where I could put the pdf in the day

  > where I could put the pdf in the day
  You can put the files on the SD card that can be inserted into the slot for SD card available on the left. Supported file formats are: PDF and EPUB

• a sentence installed updated software, "OSx recovery software update" and the overview application still refuses to work however I try to launch it. He started and left immediately after recovery immediately, she leaves, she shows also a no document error

  I just installed new updates of software, "OSx recovery software update" and the Preview app still refuses to work, however I try to launch it. He launched and immediately closed unexpectedly after unexpectedly WARNING recovery he immediately left again, it also shows a notice of error document

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• HP Officejet 6830: wants to turn off printer 2-sided, and the author of the previous question link does not work

  to turn off printer 2 faces, and the author of the previous question link does not work

  Please read this post then provide some details.  What operating system? Windows, you can change the default value by going into the directory devices and printers, click with the right button on the Officejet 6830, select Printing Preferences, and choose the desired default values, apply.