How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

* Original title: startup

How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

Hello

I understand you want to learn about programs, you should start your Windows startup. I will certainly help you to question.

When you start Windows by using a normal startup startup, several applications and services automatically, and then run in the background. These programs include the base system, antivirus software, utility applications processes system and other software that was previously installed. These applications and services may cause interference when you install or run a program.

The system configuration is a tool that can help identify problems that might prevent Windows from starting correctly. You can start Windows with common services and startup programs turned off and then reactivate them, one at a time.

I suggest you to refer to the links below and check if this is useful:

Using the Configuration System (msconfig)

Perform a clean boot to determine if background programs interfere with your game or program

Hope this information helps.

Please get back to us with an update on the issue, we will be happy to help you.

Tags: Windows

Similar Questions

  • How to find out what are the missing drivers?

    No, my laptop model is Hp Pavilion dv6 1337tx. One day ago, I installed Windows 7 32 bit OS and also installed all the drivers from the HP site. In Device Manager I see som drivers are missing. Those, what can we and how can I identify the missing drivers and fix this?

    I've attached a screenshot of the Device Manager showing that some drivers are missing.

    Usually, it's hard drive of SmartProtect or HP 3D protection Guard.  I see not available on the web portal of support for your laptop.

    Try this one. http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-76187-1&LC=en&DLC=en&cc=us&product=4011375&sw_lang=&OS=4063

    Post your results here in your thread.

    Best regards
    ERICO

  • My machine suddenly began to access the internet every few seconds.__How can find out what is the cause? A virus scan led to no result.

    My machine suddenly began to access the internet every few seconds.
    How can I find out what is the cause? A virus scan led to no result.

    Something constantly running must be what actually happen. The network meter gadget shows that it is evenly spaced.

    O.K.  He finds!

    It is McAfee Network Agent - mcnas.exe

    Services of all the MCS crossed and off a
    This one did.

    Don't know if its corrupt or not
    And talk to McAfee is in talks with the India!

    Nothing seems not to be dangerous.

    Thanks again for all the help.

    TREV.

  • What are the minimum services required for a windows7 home premium system runs completely independent

    My better half is not in computer science and has no desire to become. I have too many movies and want to set up my HTPC as a giant DVD player only. I load movies and play movies.

    What are the absolute minimum services required for windows 7 to run (and stop telling me that's not authentic) to run the 2 tasks only Media player and an extraction program and absolutely positively nothing else
    no firewall, antivirus, network, internet, encryption, indexing, etc... required.

    Thank you

    Hello

    See this link that shows how to turn off services in Windows 7.

    http://www.SevenForums.com/tutorials/2495-services-start-disable.html

    http://www.techknowl.com/2009/03/disable-unwanted-services-and-speed-up.html

    It will be useful.

  • How can I find out what is the cause of this error in SQL Developer Data Modeler

    Friends,

    I am trying to import features in SQL Developer Oracle Designer 10.1.2.3 Data Modeler.

    If you need perform the following steps to import:

    Template file-> Import-> Oracle Designer-> select connection to the base-> select work area-> select System application-> select an entity-> click Finish-> begins to import


    During the import process, I see an alert with the message dialog box:
    There are errors in import - check Log file 
    Clicking Ok dismisses the alert box, and I see the following summary screen:
    Oracle SQL Developer Data Modeler Version: 2.0.0 Build: 584
    Oracle SQL Developer Data Modeler Import Log
    Date and Time: 2010-08-09 14:27:26
    Design Name: erdtest
    RDBMS: Oracle Database 10g
    
              All Statements:           32
              Imported Statements:      32
              Failed Statements:           0
              Not Recognized Statements:      0
    The entity appear in the logical view in SQL Developer Data Modeler.

    While they were inspecting the log file, I see the following entry:
    2010-08-09 13:50:34,025 [Thread-11] ERROR ODExtractionHandler - Error during import from Designer Repository 
    
    java.lang.NullPointerException
         at oracle.dbtools.crest.imports.oracledesigner.logical.ODORelation.createArcs(Unknown Source)
         at oracle.dbtools.crest.imports.oracledesigner.logical.ODORelation.generate(Unknown Source)
         at oracle.dbtools.crest.imports.oracledesigner.ODExtractionHandler.generateDesign(Unknown Source)
         at oracle.dbtools.crest.imports.oracledesigner.ODExtractionController$Runner.run(Unknown Source)
         at java.lang.Thread.run(Thread.java:619)
    Anyone can shed light on this error?

    Thanks in advance for any help you may be able to provide.

    We have identified that objects recovered and on the branches are not considered by the Data Modeler. This bug has been connected (#10022016) and is being implemented.

    What

  • How do to find out what Procces flows a mapping is run?

    Hello!

    I have 11.1 OWB and a large number of mappings (> 300) and a lot of big PFs.

    I didn't find a way to check in what PF a certain mapping is.
    (The application is new for me).

    Nowhere is this info in DC? I hoped he might be somewhere in property sheets, but does not.

    You may select a loan to find out this info from the repository?

    I would appreciate the code.

    See you soon,.
    Ykspisto

    Hello
    Run the stored procedure
    wb_workspace_management.set_workspace ('', '');
    before you run your selection

    Owner of combinations work/workspace workspace, you can get query
    Select nom_espace_de_travail, WORKSPACE_OWNER from all_iv_workspaces;

    Kind regards
    Oleg

  • How can I create VI with inputs that run immediately when the update?

    I'm using LabView for controlling stepper motors. I would create a VI with a front panel that has 4 arrows, 2 per engine. My goal is to be able to run the VI and then press a button to move the engine.

    I created separate VI for each funcition of engines - one vi to set current operations, to determine the current travel, another to move up by a certain amount and so on. Work of these vi and I can move and adjust engines, but only by running separate VI.

    How can I combine them into a single VI and make them run to the pressure of a button or the change of a property? An example would be to establish a new current holding company and place the operation current vi run immediately and send the order to the engine. Then continue to press the arrow keys without having to hit 'run' on an another vi.

    Thank you very much


  • What are the causes of some pages not to load on an individual PC when the site is OK and the other PC can access?

    Hello

    8.1 to win

    I recently made some changes to my internal network and all of a sudden attempts to access Bing give an error. My network is:

    When I connect either wired or wireless to wireless router I get to Bing.  When I connect to the router cable regular I get this error message:

    As I connect within seconds after each attempt, I don't think that the site has a problem.  For some reason, my new network connections have introduced some problem with the connection to Bing.  I use a new cisco wireless router.  When I put my old Linksys router in place, the problem does not occur.

    The problem only occurs with Bing.  I can connect to this forum very well, as well as MSDN and all other Microsoft forums.

    Yet once again, the problem is to the wired connection on the regular router.

    Additional info after writing this post: The problem is slightly different, so the title of the position was changed and this-more information can be found.

    Even more information after writing this post:  I installed Google Chrome to see if this is a problem in Internet Explorer.  No, the Chrome has a problem as well.

    I note that my ISP has given me a new IP address in a completely different set of addresses.  I only mention that in case it triggers a memory on connection issues.

    Hello

    I think I found the problem that was affecting my system.  It is not the solution for everyone, but if people are looking, it is at least a possibility.

    In my router, there is a place to manually enter the server DNS IPs.  I added specifically to my router the IP addresses of my ISP's DNS servers in the preferred and secondary IP addresses.  It will take positive time this solved my problems, but it seems to hold.

    Previously, I relied on the router to forward DNS queries to the next router in front of her which is effectively connected to the ISP (as shown in my picture).  But this does not seem to have been reliable, it seems so specifically direct the router to directly access servers DNS of the ISP have mitigated the damsels of DNS.

    Best regards

    Alan

  • How can I find out what all the "others" are on my hard drive?

    I'm trying to free up space, storage, there are so many other space of plug, but I'm not sure how to locate files to remove. Help

    Explains the other > OS X tips storage display

  • I'm not very technical... My memory of the iPhone 6 is almost full, mainly photos, I have an iCloud account 50G, how do I find out what that is on my iCloud? And can I remove photos from my phone?

    help with iCloud

    If you are connected to iCloud on the phone and sync photos, if you delete them from your phone they will be deleted to iCloud. To increase the available space, go settings/iCloud/Photos and select optimize iPhone storage.

  • How do I find out what version of the APP is supported by WebLogic

    The version of WebLogic, I used is 10.3.6.0. In order to use JPA2 instead of JPA1, I followed the guide says to set it manually by adding these lines in commEnv.cmd (programming Enterprise JavaBeans, 3.0 for Oracle WebLogic Server 11 g Release 1 10.3.6 Version):

    Set wls_modules = C:\Oracle\Middleware\modules
    Set PRE_CLASSPATH=%wls_modules%\javax.persistence_1.0.0.0_1-0-2.jar;%wls_modules%\com.oracle.jpa2support_1.0.0.0_2-1.jar

    Then I changed to TopLink Kodo on WebLogic console.

    Suddenly, I read "Java EE 6 support comes at WebLogic 10.3.4.0 on January 15, 2011" (http://dev.eclipse.org/mhonarc/lists/eclipselink-users/msg06874.html).

    I wonder if WebLogic 10.3.6 is already set to use default JPA2. We could easily answer if I knew how to see what JPA, JTA, EJB, or wherever the version of configuration are defined when the server is started. Where can I get this information?

    My understanding is that the situation in WebLogic 10.3.6 is quite the same as in earlier versions - it comes with the jars of JPA 2.0, but they are not enabled by default so that it can respond to the Java EE 5 compatibility requirements. This is mentioned in the documentation that you could see here: http://docs.oracle.com/cd/E23943_01/web.1111/e13852/toc.htm#BGGBIJBI
    and the docs to 10.3.5 here:
    http://docs.Oracle.com/CD/E21764_01/Web.1111/e13852/TOC.htm#NOTES149

    The link that you referenced says not 10.3.4 WebLogic's Java EE 6 compatible. The reference I think you got this from says that the com.oracle.jpa2support_1.0.0.0_2 - 0.jar is included for future compatibility of Java EE 6, but it is not enabled in 11.3.x so that there is Java EE 5 compatible. It is essentially delivered an overview of Java EE 6 components that are not enabled - only WebLogic 12 c is fully Java EE 6 compatible by default, which includes the JPA 2.0.

    Best regards
    Chris

  • What are the details of sending messages text/SMS from computer?

    I'm afraid that this question is a bit off topic, but I searched and searched and searched for information on how to send any text or SMS from my computer. I don't have a cell phone, but I am inclined to believe that I can send the text of my computer. I am particularly interested in sending text responses in places like surveys of Ed Schultz Show text. I do not understand how to address a message to send text. The Ed Schultz Show refers to a number ": 6222639", and an address "* address email is removed from the privacy *, then apply to the text an 'A' or a 'B'." I'm just confused. Please, someone give me a clue.

    Thank you in advance to give a useful answer and not a bad mood put down.

    You need a cellular service to send text messages,

    Your internet service provider is perhaps the best people to ask,

    Instant messages, SMS is a function of a Messenger service,

    Hotmail - outlook.com uses Skype,

    Gmail has its own technology,

    What email service do you use, yahoo...

  • What are the answers of code of HD521-2W SMART short self-test error when running the diagnostics?

    1 HP Pavilion a4310f, product # AY014AA-ABA, software Build A1NAv6PrA1

    2. Microsoft Windows 7 Home Premium (64-bit) Edition

    3 a receipt the "Failed SMART short self-test HD521-2W" when executing Hardware Diagnostic tools.  Error message:

    Error message the device reported the following State: the previous self-test completed having the read element of the test failed. 01/12/2012-06:21:01

    The first LBA value failure Error Message is 440642933 and the failure occurred after that the device was working since 7943 hours under tension.

    01/12/2012-06:21:01

    4. I made no changes to my system for over a month.

    Device: Hard disk WDC WD64 00AAKS-65A7B SCSI Disk Device, the revision of the firmware 01.03B01

    This unit is my hard drive (it is in factory with partitions C: and D: {Factory Image})

    Hello

    The Smart error code would indicate that the hard disk is running out and must be replaced.  If you want a guide on this, let me know.

    Kind regards

    DP - K

  • What are the programs should run at startup

    Paltalk I still have started from. went to windows to resolve problems by saying that I owe a lot running at startup

    Hello

    These methods allow to check what you have running at startup and use only those you need. Many
    programs will load in a start-up but really they do not need to be loaded automatically
    to work properly.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or
    Windows 7
    http://support.Microsoft.com/kb/929135

    Use advanced tools to solve performance problems in Windows 7 http://www.howtogeek.com/howto/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-windows-7/

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

    Use advanced tools to solve performance problems in Windows 7 http://www.howtogeek.com/howto/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-windows-7/

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to change, add or remove startup programs in Windows 7
    http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out what are the files, registry keys and other objects processes have
    Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
    you who owns each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured so that it starts automatically when your system
    boots and you login. Autoruns shows you the full list of registry and file locations where
    applications can configure Auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity in
    in real time.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded
    automatically when Windows starts. For each request, the following information
    appears: product Type of startup (registry/Startup folder), Command - Line String,
    Name, file Version, company name, location in the registry or the file system and more.
    It allows you to easily disable or remove unwanted programs that run in your Windows
    startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The
    Window Watcher says it all, reporting of any window created by running programs, if
    the window is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • How can I remote desktop not computer field of work.

    I have an office with two computers (Windows 7 Pro) on the same router connected by a working group that I put in place so that they can share hard drives.

    I am trying to use remote desktop to work at home (also Windows 7 Pro), but is not able to connect. I have the correct IP address for the desktop computer, and its settings are
    "Allow Assistance connections to this computer remotely.
    "Allow connections from computers running any version of remote desktop" I want to change to the more secure option.

    How can I implement the Office remote to work on the desktop computer at home?

    Or,

    Is their anyway I can have my computer at home join the task force at the office, I created?

    Thank you
    -Mike

    Please note that I can't use Teamviewer because if I'm not at the office, no one else will have.

    No problem, I understand.  My use is personal, so I use the freebie version.  But for remote desktop, it is not too difficult, takes just several steps during the installation of the first, although it has a small caveat that your internet service provider could change your external IP address and you wouldn't be able to connect until you find what's news.  It's probably rare.  Even on my home connection, Cox Cable here almost never changes my IP address.  And with most Internet accounts business, the hard provider agrees to not change.

    Here is the process.  It varies depending on your router (I use a Linksys router at a low price, but it is very similar).

    1. First, give the computer (desktop PC) connect a static IP address.
      This page explains how, in probably as more details you want :)
    2. Tell your router to forward incoming remote desktop connections to this internal IP.
      Log into your router and look for Port Forwarding or Port Range Forwarding.  It is usually easy to spot. Mine is below, and you can see entering 3389 connections (you can specify a range for RDP one is enough, so my range is just a single port) and transfer them to my address interne.104.  Click here to see a larger version of this image.

    3. Find out what are the external IP address of your office.
      In the settings of your router, or just ask Bing "what is my IP address?" , you can dig around your desktop computer.

    That's all.  Later, when you want to connect to your desktop computer, you will use the external IP address of the internet connection of your office, and the router will forward this application on the computer that you want to achieve.

    If you want to be able to connect to multiple computers, you can set another computer to use a different number of port instead of 3389 (official Microsoft here) and do the same steps to transfer 3390 to the other computer.  Later, when you want to connect to the other computer, type your IP as the IP: port, such as 11.11.11.11:3390 and it will connect to the other computer.

Maybe you are looking for

  • Where did my files go?

    I just upgraded to Sierra. The former 'user files' seems to have disappeared. As far as I can tell all the files are still there but they have just dumped in a big folder "All Files." I have deliberately never lit storage iCloud because I have my own

  • No POSITION, but the fan up

    I have connect a USB drive in the solid state in a 21.5 iMac, end of 2012, when the screen went black and the fan maximum. (External SDD now seems to be dead, as well as the iMac.) I have reset the SMC, no change.  Still no POST chime, only high spee

  • Upgrade WhatsApp and Iphone storage error

    The recent upgrade to Whatsapp 2.12.14 caused my iphone 6 more (ios 9.2.1) believe that its storage is complete here in addition to 5 GB of storage available. Anyone else see this problem? How to solve it?

  • Cannot open Expression Web 4 program... says "program stopped working."

    Downloaded and installed .NET and Expression Web 4 but cannot open the web program... says "program stopped working" already deleted and reinstalled... same message

  • I can't invoke the camera on Simulator 9105

    Hi all I do the conversion process of the application compatible with all devices, but I found a problem when I want to do in the Simulator 9105. I use the 9105 EU T-Mobile Simulator When I want to call a message like this cameraCould not start the c