How can I fix an instalation of windows on a 2nd drive?

Similar Questions

• Properties view displays all the settins, theme shows right and when I leave my computer on some time it crashes. How can I fix it with the windows CD? Compatibility Wizard says bad ini file__

  When I try to change the background, display shows theme instead, properties and when I leave my computer on at a certain time, it freezes. What can I do to fix this? How can I use windows CD to repair, when I put the CD and you press the 'r' key, nothing happens, please help?

  The lack of tabs in display properties usually indicates a malware infection. First run the scans and do not skip the preparatory work. If the machine stands (not frozen) in Safe Mode (where you'll be scanning), it is also a good indication of infection. Regarding the CD does not start, you probably don't have the computer configured to boot from the optical drive. But no matter, because enter the Recovery Console (which is what happens when you press 'R' from the XP installation disk) won't be useful in your situation anyway.

  Go through these stages of systematically General malware removal:
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Include analysis with David Lipman's Multi_AV of and follow the instructions to do all scans in Mode without failure. Read the Special Notes about the use of Multi_AV in Vista.

  http://www.elephantboycomputers.com/page2.html#Multi-AV - instructions
  http://tinyurl.com/yoeru3 - download link and further instructions

  When it failed, download Guided Help. Choose one of the specialty forums listed on the first link. Save and read his FAQ display. PLEASE DO NOT DISTRIBUTE NEWSPAPERS IN MS FORUMS

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). Please be aware that not all shops are skilled at removing malware, and even if they are, your computer may be so infested that Windows will have to be properly installed. If possible, have all your data backed up before taking the machine into a shop. MS - MVP - Elephant Boy computers - don't panic!

• How can I fix "this copy of Windows is not genuine Windows 7 Build 7601? See report & help please.

  I sent my laptop for a repair by the TechGuys @ PC World long time but now I keep the message that my Windows is a counterfeit.

  The TechGuys insist that they not have installed corrupted software and refuse to do anything more on this subject

  Here is my diagnosis of the system:

  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  Validation code: 50

  Validation caching Code online: n/a, hr = 0xc004f012

  Windows product key: *-* - XFQDR - PJ794 - 8447M

  The Windows Product Key hash: LVvE4tx6kQ/wSugKQc0w694kAF4 =

  Windows product ID: 00359-OEM-8992687-00304

  Windows product ID type: 2

  Windows license Type: OEM SLP

  The Windows OS version: 6.1.7601.2.00010300.1.0.003

  ID: {332EB7A7-332A-43F2-9CD1-8EBC9BDBD250} (1)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows 7 Home Premium

  Architecture: 0x00000000

  Build lab: 7601.win7sp1_gdr.130318 - 1533

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  Version: 2.0.48.0

  OGAExec.exe signed by: Microsoft

  OGAAddin.dll signed by: Microsoft

  OGA data-->

  Office status: 100 authentic

  Microsoft Office Home and Student 2007-100 authentic

  OGA Version: Registered, 2.0.48.0

  Signed by: Microsoft

  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070005]

  [File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070005]

  [File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070005]

  [File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070005]

  Other data-->

  Office details: {332EB7A7-332A-43F2-9CD1-8EBC9BDBD250}1.9.0027.06.1.7601.2.00010300.1.0.003x 32*-*-*-*-8447 M00359-OEM-8992687-003042S-1-5-21-2620106703-1275669022-1269381020ADVENT Roma Phoenix 1.05AD20090916000000.000000 + 0001CBB3607018400F808090409GMT Standard Time(GMT+00:00)03DSGLTDDSGWIND7100100Microsoft Office home and Student 200712208D953BCCF4F38MzRh9456kr He53TQrqaGBAh1gA plus81602-924-8611311-68416 1

  Content Spsys.log: 0 x 80070002

  License data-->

  Input error: can not find script file "C:\Windows\system32\slmgr.vbs '.

  Windows Activation Technologies-->

  HrOffline: 0x00000000

  HrOnline: n/a

  Beyond: 0 x 0000000000000000

  Event time stamp: n/a

  ActiveX: Not registered - 0x80070005

  The admin service: not registered - 0x80070005

  Output beyond bitmask:

  --> HWID data

  Current Hash HWID: MAAAAAIAAQABAAIAAAABAAAAAgABAAEAeqh4ancWevBW2nC/pviq/1g1UiKAm0bK

  Activation 1.0 data OEM-->

  N/A

  Activation 2.0 data OEM-->

  BIOS valid for OA 2.0: Yes, but no Windows marker

  Windows marker version: N/A

  OEMID and OEMTableID consistent: Yes

  BIOS information:

  ACPI Table name OEMID value OEMTableID value

  APIC                                    PTLTD                                     APIC

  FACP INTEL CRESTLNE

  HPET INTEL CRESTLNE

  START PTLTD $SBFTBL$

  MCFG INTEL CRESTLNE

  SLIC DSGLTD DSGWIND7

  SSDT BrtRef DD01BRT

  SSDT BrtRef DD01BRT

  SSDT BrtRef DD01BRT

  SSDT BrtRef DD01BRT

  I tried to remove the sp1 that I saw on another post but that he has received the following message: "Setup has detected the error: 0x800736b3.» The assembly reference is not installed on your system. »

  The problem is that I have the disc of Windows 7 OS because it was already installed when I bought the laptop, so I find myself with this problem and no way to fix it other than spend more money buy a new OS and I simply do not have it.

  Any help would be greatly appreciated so thank you in advance if you can help.

  Laws

  Hi Louise,.

  Perform the steps from the link below and see if it works.

  Windows 7 displays "Windows is not genuine" with a 0x80070005 error code

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/( )

  Good day!

• How can I fix problems created with Windows Installer Cleanup?

  I had some problems installing a software on my Windows XP and had to run the software Windows Installer Cleanup before the program installs. I was stupid and didn't choose carefully what programs should perform the Windows Installer Cleanup. So now my automatic updates for my XP will not be installed.

  Here is the message I get when trying to install the automatic updates:

  Initializing installation... done!
  Install the update of security Microsoft .NET Framework 2.0 Service Pack 2 for Windows 2000, Windows Server 2003 and Windows XP (KB974417) (update 1 of 1)...

  Here is the result:

  Some updates not can be installed.
  The following updates have not can be installed:
  A security update Microsoft .NET Framework 2.0 Service Pack 2 for Windows 2000, Windows Server 2003 and Windows XP (KB974417)

  This is the only notification I receive the updates failed. I think it's because the link to the installer of windows has been removed by the software Windows Installer Cleanup.

  How can I correct this situation?

  Kind regards

  Red Cloud

  Red Cloud,
  If you look at the history of the update, which is the error code for the update failed?  Go through the steps of KB923100 and post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• H8 - 1520t: how to do a clean install of windows 10 on another drive?

  Hi all.

  Today, I decided to make the transition to windows 10. I want to do a clean install, however, because I recently had an SSD and install the OS on it instead of on my hard drive. First of all, I even need my product key to do a clean install on a new drive? I made a clone of my C: dirve just in case something goes wrong, cordially. My SSD is 100% empty and has 110GB available on this subject, but my main hard drive has about 400 GB of stuff on it, so cloning my drive for the SSD drive is out of the picture.

  So basically what I want to know is this: 1. do I need to have my windows key to do a clean install of windows 10 8.1 of windows on a different drive.

  2 if not, how to do a clean install on a new drive

  3. If I need, how can I get it?

  Thank you all

  The simplest solution would be to save the data that you want to keep on an external hard drive, then remove this data and programs from the old hard drive so that only the BONE remains.  From there use migration software from your manufacturer SSD to clone the old drive to the new SSD using a USB to SATA.

  The Windows key is embedded in the BIOS and will be recognized by the computer on any installs.  It would be desirable to collect your key, just in case, using Belarc Advisor, which gives you all kinds of info on your computer.  Do this before doing anything.

  http://www.Belarc.com/free_download.html

  Share your drive and be sure that it is operational.  Now you can perform a new installation of the upgrade of Windows 10 using an ISO bootable.  See step 5 or 6 of this tutorial:

  http://www.tenforums.com/tutorials/2267-Windows-10-upgrade-installation.html#step3

• How can I fix error 0 x 80070052 when Seagate FreeAgent drive connected?

  I get this error code: 0 x 80070052.  When I plugged in Seagate FreeAgent drive (external hard drive), I got this error message.  I use Mircorsoft Vista

  Thanks for your help

  Hello
  
  1. What is the error message with the error code mentioned?
  2 is this specific problem on the external drive Seagate FreeAgent?
  3. other USBs work?
  4. you are the administrator of this computer?
   
  , Note 1: Try again with a different USB port and see if that helps:
  Note 2: Try the same external drive on another computer and see if it works.
  
  Method 1: Try to format the drive and then connect and see if it helps:
  Right-click on the external hard drive and click Format.
   
  Method 2: You can run a disk check to see if there are drive errors that can cause this problem.
   
  You can read the following article to complete the checkdisk.
  Check your hard drive for errors: http://windows.microsoft.com/en-US/windows-vista/Check-your-hard-disk-for-errors
   
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• Vista Service Pack 3 has a error code 8024002D. How can I fix to install service pack 3?

  I formatted my hard drive and reinstalled Windows Vista and that fixes the problem.
  I've looked everywhere and no one could help me solve this error otherwise

  Do not know what Service Pack 3, you try to install, but it certainly isn't a Vista one.

  Take a look at this: http://support.microsoft.com/kb/958041
  Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0x8024002D".

  See if something is relevant to what you're trying to install, otherwise, poster returns with relevant information, so that we can help you further. TaurArian [MVP] 2005-2010 - Update Services

• How can I stop force install of Windows 10

  * O.T. > windows 10

  How to stop microsoft to try to force me to install windows 10... I DON'T WANT it on my computer... I've heard ANYTHING good about it... i love my windows 7... two days in a row, they tried to force on me... NOT STOP, I WANT it on my computer... I can possibly be more obvious than that?

  Easier methods,

  https://www.grc.com/never10/details.htm

  http://blog.ultimateoutsider.com/2015/08/using-GWX-stopper-to-permanently-remove.html

  Before, excluding the recommended updates is the starting point

  

• How can I fix my split-screen windows? It will not drag & drop.

  before I had my computer cleaned up, I use to be able to split my screens.  Now, they will not be shared by drag-and - drop. What can I do else?

  Hello Patricia,

  I understand the inconvenience caused to you.

  There could be a possibility that this issue would have occurred due to display corrupted in the system drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  I suggest you to uninstall and reinstall the video drivers.

  Try to uninstall and reinstall the video drivers. Please follow the steps below and check if the problem is resolved.

  1. On the desktop, press the Windows key + R and type devmgmt.msc and press enter to open the Device Manager.

  2. Expand display adapters.

  3. Right click on the device.

  4. Select Uninstall , and then follow the steps prompted.

  5. Restart the computer when you are prompted. This is going to re - install the drivers.

  Note: I also suggest to visit the manufacturer's Web site and install the latest drivers.

  If the problem persists, follow method 2

  Method 2:

  How Split the screen of the monitor of your PC, please follow the steps below and check if it helps.

  1. Open programs or documents to display split screen.

  2. Click on one of the windows program. Press and hold the button of the 'Windows' logo on the bottom left of your keyboard.

  3. Press the right arrow on the keyboard while holding down the "Windows" logo button, to start the program on the right side of the screen.

  4. Click the second program or document, press on and press and hold the "Windows" as before.

  5. Press the left arrow while holding down the 'Windows' logo button, to lock on the left side of the screen.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

• How can I fix error 0x800106ba for windows defender?

  I have Windows Vista 32 bit for my operating system, I tried to run my Windows Defender (rotate, etc.), but I get code error 0x800106ba.  I tried to find a way to solve the problem without success.  If you know how to solve this problem, please let me know.  Thank you for your help.

  Take a look at this Microsoft Support tutorial

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  Also...

  If you have the following AV, antivirus, programs installed, close your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
  Bottom line: it's ok. It's normal.
  List of AVs which will stop Windows Defender:
  Norton
  McAfee
  AVG
  Microsoft Security Essentials

• How can I fix the rerror on window media player codc1199 message?

  I get an error message when trying to down load something in my windows media player.

  Hello

  Other players, such as iTunes and QuickTime, have been known to corrupt some files that
  then will cause this error.

  You received the C00D1199 error message using Windows Media Player. What follows
  information to help you solve the problem.
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D1199&ContextId=68&OriginalID=80040218

  Windows Media Player C00D1199 - this also applies to Vista and WMP11
  http://Windows.Microsoft.com/en-us/Windows7/C00D1199

  C00D1199 errorhttp://www.updatexp.com/c00d1199.html
  
  ---------------------------------------------------------------------------------------------

  In addition to the information contained in the link above, you should probably update the codec.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ===============================

  Determine if 32 or 64 bits.

  Start - type in the search box-> Winver find upstairs and double click on - check version

  After that the foregoing, add codec - get these 32 bit if:

  -Free - CCCP also get free tool of insurgents
  http://CCCP-project.NET/
  http://www.freewaregenius.com/2007/02/09/CCCP-codec-pack/

  FFDSHOW - free
  http://sourceforge.NET/projects/ffdshow/

  Check here:

  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  ============================================
  ============================================

  If 64-bit:

  Read this 1st and go that route, or use the one below.

  http://www.Vistax64.com/sound-audio/152850-Vista-codec-pack-32bit-64bit-Media-Player-codecs.html

  --------------------------------------------------------------------

  If 64-bit Vista - can run WMP in 32 or 64 bit mode.

  Or try these: download - SAVE - go to the place where your put them RIGHT CLICK – RUN AS ADMIN.

  For 32-bit use these - OR the 32 bit ones listed above which I prefer.

  K - Lite Codec Pack 8.1.7 (or newer)
  http://www.codecguide.com/

  Use them for 64-bit:

  K - Lite Codec Pack 5.6.0 (64-bit) (or newer)
  http://www.codecguide.com/

  -------------------------------------------------------------

  You know that you use WMP 32 or 64

  Change, change or set 64 - Bit Windows Media Player 11 (WMP11) in Windows Vista x 64 as default
  http://www.mydigitallife.info/2007/01/19/switch-change-or-set-64-bit-Windows-Media-Player-11-WMP11-in-Windows-Vista-x64-as-default/

  ------------------------------------------------------------

  VLC needs, of no use so usually Codec as a backup when asked to support associations of files just say no.

  VLC - free
  http://www.videolan.org/VLC/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I fix logout problem on Windows 8

  After I have my windows 8 has been set high-contrast disconnecting from the computer on me, and since then it keeps disconnecting every time time I login

  Like any other user?

  Yes
  But I've already fixed the problem; Heres how I did it

  Step 1

  The computer must be started in safe mode. The newspaper / lock screen click on the point of power at lower right. Press SHIFT while clicking on restart. Go wrong with shooting, then Advanced, Windows startup settings , then restart, and follow the instructions to start your PC in safe/safe mode with networking mode.

  Step 2

  Connect to the account, then press Win + R, type msconfig. Go to the services tab.

  Step 3

  To the lower right click disable all , and then restart the PC.

  Step 4

  The PC should start normally (not in safe mode).

  Sign in to your account. NOTES following services disabled, that the PC will be fully functional. Repeat steps 2 & 3, but on the contrary all the Services.

• How can I fix a corrupted in windows ultimate basket

  I can fill the bin and I can empty the tray, but microsoft fixit says it is corrupt

  Hi ramonamoal,
   
  Follow the suggestion given in the link to fix the issue:
  Error message: the trash on C:\ Is damaged or invalid. Don't you want to empty the Recycle Bin for this...

• How can I fix "this copy of windows is not genuine" build 7601, windows 7

  There are many moons, I decided to download windows 10, I didn't like it and came back to windows 7.  I got this in the bottom right of my screen, "this copy of windows is not genuine" build 7601.

  I looked on this site and found that everything I had to do was, go to start, type cmd, by ensuring that its in the administration, then I type SLMGR - REARM - but I got a dialog box displays indicating "has exceeded the maximum number of rearm, you must reinstall the OS before trying to rearm again."

  I do not know what is the OS, and how is he said I reset too often when I don't?

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
  Once downloaded, run the tool.
  Click on the button continue, after a short time, continue button will change to a copy button.
  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

• How can I fix error 1068 for windows firewall?

  I have windows 7 and have tried to run code "retsh winsock reset" and "netsh firewall set opmode enable" rebooted I also tried the patch program.

  I tried the firewall of windows, services activation and I get "Windows has no start the Windows Firewall service on the local computer."

  Error 1068: The Dependecy service or group was able to start.

  I have a Toshiba Satellite 64-bit Amd Turion (TM) P540 Dual-Core Processor

  Hi Jonas,.
  Follow these instructions:
  Download and install Windows Repair:
  http://MajorGeeks.com/tweaking.com_-_Windows_Repair_d7141.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Uncheck all boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let us know if that helps you.
  Brian