How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD.

How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD. Sometimes, when I click on one of the disks that it opens, but the page for the drive is empty. It also says to insert a disk, sometimes when there is a disc in the drive. How this can be fixed.

Hi vtdubu,

·         Did you do changes on the computer before the show?

Follow the steps in the article.

Your CD or DVD drive is missing or is not recognized by Windows or other programs

http://support.Microsoft.com/kb/982116

Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

Tags: Windows

Similar Questions

  • Your CD or DVD drive is missing or is not recognized by Windows or other programs

    I tried to apply the patch, MicrosoftFixit.dvd.Run.exe. He could not say "NET Framework initialization error. Unable to find a version of the runtime to run this application. If this is related to the framework version number .net (such as published in some issues) then Microsft back compatible fix to the problem. It should give a step-by-step procedure to solve these 2 problems. Microsft say DVD problem was know question and it was fixed in XP SP2. I installed Windows XP with SP2 and now updated to update to SP3. But the problem persists. Any help from anyone?

    shanglur,

    If you have installed all Windows updates, there's no upper/lower filters to delete, you can try...

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    But it's almost the same thing as above. I suspect that your cd/dvd drive may have failed.

    Rick

  • The lack of CD/DVD drive - not recognized by windows or other programs

    help-tried several fixes m/s and fix it but did not help. Here are a few messages I get: when in the details of the driver for my Sony DVD + RW AWQ160s - update drivers: here are 2 notches and uncked 2, one by Sonic Solutions and a Roxio time saying no digitally signed (that would be a problem)?  also when I look at update or install the updated driver, after that search, I get this is the best driver for this device - I don't have this device Ouch!  Without my CD drive E work of course I can't even try reinstalling drivers/utilities cd... can someone help this computer incompetent gal?  I'm ready to wipe and reinstall vista I have other problems like IE does not and ms word does not always.  I did go back several times, and perhaps not far enough back but had a Trojan horse and do not want to deal with it again.  thx for any help

    Hello

    (1) would you please provide more information about the problem you are having with word and Internet Explorer?

    Method 1: You may need to reinstall Roxio on your computer, please see the article below for programs that can cause this problem:

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/982116

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
    How to back up and restore the registry in Windows

     

    Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer
    ***************************************************************************
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • CD/DVD drive is not recognized by Windows or other programs. HP Pavilion s7310n Slimline PC

    He used to work. It comes from when the computer was around the age of 4 months. should have put in, but could not take the days off to bring it back to BEST BUY - 2 years ago.

    Then... the CD/DVD drive is not recognized by Windows or other programs. If I insert a CD as Photo Suite III or any what CD/DVD, the green light comes on but no rotation and not even a warning to error.

    Now what? How can I find out / know the specs of what to look for a replacement/new one... I lost the book in my move to Florida. I have tried all sorts of key word in GOOGLE and I am half blind and tired to be re-directed to sites that have nothing to do with my question.

    Can someone help me please? Thank you. TJ Rev.

    PS... None of the links in the Solution of Sissy2 DIFFICULTY to where they are supposed to. I don't think it's my problem anyway.

    MY CD/DVD drive is dead.

    Message edited by aalienlady on 05/21/2009 21:32
    Message edited by aalienlady on 05/21/2009 21:32

     Download XP_CD-DVD - Fix.zip and save this file on your hard drive. Navigate to where you saved it, and double-click the file to extract the content. Find the EXE file that you extracted and double click it.  A confirmation dialog box appears when the script is done.  You may need to reboot for the change to take effect.

    Works on XP and Vista. Good luck!

  • CD or DVD drive is missing or is not recognized by Windows or other programs

    How can I solve this problem withot having to reinstall the operating system?

    Hello

    Please try the below mentioned article and see if that helps:
    My drive does not appear in Windows Explorer:
  • Code 19 cd/dvd-rom drives is no longer recognized by windows

    I have referred to these readers as R: and S:, they do not appear when I open 'my computer '. None of my media players see these discs. Earlier, I would put in one of these drives dvd or cd, and immediately started to my Media Player nominated. Thank you.

    Hello

    It is not uncommon, in fact more expected than a question as this affects both drives.

    19 code means there is a driver conflict such as two devices attempt to use the same resources.

    Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of them.
    Selves at the start because they will be competing for resources. This does not mean that this problem was caused by
    These however is a possibility depending on which and how many you have installed.

    -------------------------------------------------------------

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================================

    After the foregoing:

    References to Vista also apply to Windows 7.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The DVD player does not work after installing Windows 7
    http://support.Microsoft.com/kb/975270/

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays
    all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

  • My CD/DVD Rom drives read do not. Windows cannot load the driver for this hardware. The driver can be correpted or missing (code 39)

    How can I reinstall a driver of dvd/cd rom?

    Hi mourad,.

    1. have you been able to use the CD/DVD-Rom drive before with no problems?

    2. did you of recent changes on the system?

    This error occurs if the driver is corrupted or missing.

    You can read the following article and try the steps to solve the problem.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    Hope this information is useful.

  • My cd/dvd drive is still not recognized, have tried to make a sys.restore

    I recently had some problems with my registry and other places after receiving unknown virus problems. Now, I believe that this caused my componet cd/dvd not work or even be recognized. I did several restarts after uninstalling and reinstalling the drive and still is not recognized or displayed in the DEVICE MANAGER. I had several boot SYSTEM RESTORE, but to no avail. My question is, is the cd/dvd drive is no longer functional?

    My question is, is the cd/dvd drive is no longer functional?

    It is possible that the drive does more - if you have another computer, you can test the DVD drive in this computer. Also try the links below.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs:

    http://support.Microsoft.com/kb/982116

    Your CD or DVD drive cannot read or write media - Fix It:
    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  • CD/DVD drive not recognized by Windows Vista

    I installed a suite of burningb of CD and DVD on my Toshiba (under Vista Home Premium). My CD/DVD drive appeared more in the computer and was no longer functional. I deleted the program I installed and apparently caused the problem, but it did not help. I have read through the help of Microsoft (929461, 314060) documents and used the Fix - It utility. Also unsuccessful. I discovered the response of Martin, the technical support engineer made on May 5, 2009. I followed his instructions with great success. However, my question now is this: I have still some remains of the problem left over. I get an error message at startup saying, 'InstaBurn UDF driver is not installed correctly. Run the InstaBurn installation program. ' InstaBurn is part of the suite of the copy (hotpics by Nova Development Corp.).  I also have an error message of my reader DVD Toshiba saying that the DVD player does not work - although it is. I played a DVD as a test on it after that I followed the instructions above. How can I remove these error messages annoying that aren't accurate?  Would appreciate any information about this minor - but annoying problem.

    Hello

    Do a Restore Point then you can go back to where you are if necessary although you should not have to:

    How to create a Vista System Restore Point
    http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
    ---------------------------------------------------------------

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================================

    Go to Toshiba and download and drivers or programs that affect the CD/DVD drive - Chipset
    and BIOS updates can also play a role.

    For any download - SAVE - go to where you put them - click on - RUN AS ADMIN

    Toshiba downloads - access your model
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Then reinstall the programs that you use for this drive.

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • CD/DVD drive not recognized by Windows all of a sudden

    The opitical drive had been used with problem. I removed a couple of days and when I came back it is no longer listed in "MY Computer". Put everything in the disc drive is not recognized. The drive does not appear on the list th of the material system. The drive has power since it extends and retracts. He tries (the light) to play the disc but stops.

    Hi Ranamaska,

    You can follow this link & check if the problem persists:

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the following article: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows?

    Hope the helps of information.

  • CD or DVD drive is missing or is not recognized by Windows

    Original title: another question about the DVD drive is not detected in Windows 7

    I have the same problem that many others have described here on the DVDR drive not detected after installing Windows 7. I still have not solved this issue. But I have another similar problem. The system will not recognize an external USB DVDR drive connected to a USB port. In essence, I have no access to the internal drive (in a Dell Inspiron 1545) or the external hard drive. Without access to a DVD player I can't even uninstall Windows 7, and I can not install or save anything else without a drive. I'm at my wits end. If anyone can help I will shower you with praise.

    Hi Therevmrbill,

      
    Scenario 1:
     
    Reference:

    Your CD or DVD drive is missing or is not recognized by Windows or other programs.
    http://support.Microsoft.com/kb/982116
      
    Scenario 2:

    1 try to connect the DVD USB drive on another computer and check if the problem persists.
    2. try to connect other USB devices to the computer and check if it is detected.

    Try to run the troubleshooter and see if the problem is resolved.

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • DVD not recognized by Windows

    DVD format

    I was not concerned about the codecs and such because I own a DVD player and do not need to play DVDs on my computer.  But now I have some records of EA games in DVD format and XP don't recognize I have a disc in the drive.  The Microsoft Download for codecs is useless.  How to fix XP to recognize ACCESS AND a computer on DVD drive?

    Hi MelFletcher,

    ·         You see the DVD drive in Windows Explorer?

    ·         Have you tried to play other DVDs?

    ·         You can fine CD?

    Follow this link and see if it helps.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

  • /AR cd/DVD not recognized by windows

    yesterday, I posted on the forums aboutmy cd/dvd does not read the disc, windows don't recognize it and says its an unidentified device, I used fix - it nothing works. Indeed, it is frustrating... help, thanks james

    Hello

    Make sure that the drive works - / settings (BIOS/CMOS) often F2 so watch the screen
    as you start - together on CD/DVD boot order - save. Put in a Windows or other boot disk and
    see if the drive works. Be sure to set the boot order to the harddrive when finished.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

  • Pioneer BLU - RAY and DVD discs not recognized by Windows 7

    The discs were fine until I installed Windows 7 Home Premium 64-bit. Before my hard drive crashed, I was using Windows 7 Pro 64 bit. The computer was built by a local store, so I don't know if they have done something special to get discs running, but readers are reported as compatible with Win 7.

    Readers are:

    PIONEER BDR - 205 Blu - ray

    DVD PIONEER DVR - 218L

    My motherboard is ASUS P6TD Deluxe, BIOS 0106

    I am very handicapped and rely heavily on my computer to work. I can't load my well-being critical software until I get these discs work, then I'll be very grateful for any help.

    Thank you

    Jeff

    Hello

    I suggest to follow the steps provided and check if it helps.

    Method 1: Run the troubleshooter of material and check if that helps.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2: Your CD or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/982116

    Alternatively, you can install the drivers from here:

    BDR-205 Blu - ray Pioneer driver:

    http://www.PioneerElectronics.com/Pusa/Professional/computer-drives/BDR-205

    Method 3: Tips for solving common driver problems:

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

    See also: automatically get recommended drivers and updates for your hardware.

    http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

    For all windows questions do not hesitate to contact us and we will be happy to help you.

  • external supermulti drive Toshiba will not write on windows xp pc. work on vista machine.

    drive supermulti external Toshiba not able to write my mini dell windows xp, works very well on a vista machine. Toshiba suppport said need to remove upper and lower filter and it is a problem of knowing. What is the solution?

    Assuming that upper/lower case filters advise was correct, the procedure to reset is shown here:

    "Your CD or DVD drive is missing or is not recognized by Windows or other programs"
      <>http://support.Microsoft.com/kb/314060 >

    HTH,
    JW

Maybe you are looking for

  • Satellite A660 - recharge the battery

    I'm just after the purchase of a Toshiba Satellite A660-1FM i7-740QM. I brought it home and plugged and then lit it. It turned out perfectly, but it doesn't seem to work on the farm. Costs associated with 0% and it is fair to say that the battery is

  • Spectrum XT Pro: Spectrum XT Pro problem with backlight on screen Skreen

    My screen is black on 1/3 of the screen. It has little to little more blacks when it gets closer to the left side of the screen. Can look as if the backlight does not work on the left side of the screen. Can this be the case, and it is editable.

  • change microsoft acount login now cant access family safety

    EU account login but only used family safety, decided to use outllook.com has changed so much, connect to an a outlook.com. Can now access outlook and e-mails and newspapers in family, but there is no info on what a child has seen. PC constantly appe

  • Low Audio when using Windows Media Center

    Hello world.  I have a question.  When I play a movie DVD or CD or anything audio Windows Media Center on Windows Vista Ultimate 32-bit Edition.  The Audio output is always half of what it is in other programs. For example.  When I play music with wi

  • BlackBerry Q10 how return the Youtube icon?

    I have a BB Q10 and deleted the youtube app. The original app seems to not be in BBW or the Amazon app store. Can someone help me how to recover this app? Thankx a lot.