How can I fix my restore was never working xp 10/25/2006
my restore does not work.
try opening the services via the admin tools Control Panel.
then find the "system restore service" and highlight it.
then right-click on it, select properties and enable/disable some options provided.
for example, start the service, then finish, then start it again. In addition, look for the option to set it to automatic.
then click on apply.
also, before leaving there will be a call to load tab. It should show another service that depends on the system restore feature. so make sure that all of the additional services that are displayed as dependants are also enabled / started as well.
Then reboot and see if you can do a system restore point.
Tags: Windows
Similar Questions
-
Card player AutoPlay does not work. My two computers are networked. How can I fix it for automatic playback works?
Hello
I suggest you to try the steps in the following Microsoft Help article and check if it works.
Troubleshoot AutoPlay:
http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-AutoPlay-problems
For more information, see the following link:
http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions
Hope the information is useful.
-
I'm trying to install Microsoft FreeLancer on Windows 7 64 bit Home Premium edition (according to WinVer: Version 6.1, build 6701, Service Pack 1).
After inserting the DVD in the drive and run "Setup.exe", I am invited by the UAC to elevate permissions - who I am agreement - then the following error message appears: "Setup was unable to find (or could not read) the language specific setup resource dll, unable to continue." If please restart and try again. »
The only valid technote, I found the issue was http://support.microsoft.com/kb/258496. The below is the list of the things that I tried after reading this technote - but no avail.
- Of course, I tried to restart.
- I checked the DVD is in good condition, even with regard to the attempts to install from the disc to a friend and even went up to compare the MD5 of all files on two DVDs, the checksums match.
- I tried using the compatibility mode for XP, although according to the report of another user on the statements of the Windows Compatibility Center that this should not be necessary.
- I ran a full "chkdsk" (i.e. one scheduled for after a reboot, rebooted) and chkdsk reported no error.
- I deleted all files "di - use ' %TEMP%, immediately after the restart and before you run setup.exe.
- I've looked at this the EMET tool had an exemption for 'setup.exe' and my tool anti-virus was disabled before installation.
Everything I try seems to have no effect on the resolution of this problem.
Can anyone suggest any possible causes of--and, ideally, solutions to-this issue?
Kind regards
Alex.
... "Step 1: perform the clean boot to verify if it's a software conflict matter. '...
-Tried but not given to impact.
... "Step 2: System File Checker tool"...
-Tried but not given to impact.
... "I would have you check the same DVD on another computer and check if it works. '...
-The only other machine that I use Ubuntu. My other half uses only his Mac.
I managed to work around this problem by using the following workaround solution:
I installed Freelancer CD on a Windows XP virtual machine running in VMWare Workstation. I then moved the installation directory (C:\Program Files\FreeLancer) off the coast of the virtual machine on my Windows 7 computer in (C:\Program Files (x 86) \FreeLancer).
The game seems to work fine as long as it is run with administrative privileges (that is, the freelancer.exe running). Without administrator rights, the games is never recorded. With them, they are registered under "C:\Program Files (x 86) \FreeLancer\EXE\Accts\SinglePlayer" successfully.
-
How can I fix the USB ports on work for Vista?
I have Windows Vista basic and USB does not work for all devices when they are plugged in. I get the message "devices connected to the computer USB has malfuctioned and Windows does not. "I also noticed that in the pilot do message"No driver for this device"Port_ #001.Hub_0007 ' if plug all devices including a USB key or a mouse, goed by single power. Any ideas how hard to pull of this problem. Thanks in advance
You can try to go to Device Manager and uninstall all the drivers remove all listed (only the hubs and not others) cos of your terminal and restart your computer. After restarting plug your rear hub.
-
Not always, but often, the program thinks my own email, that I just wrote, is spam. Often, it is a response to an email sent to me and sometimes, if they have an image in the signature line, and I remove their image of my answer, it will send very well (I can leave the rest of what they wrote, and remove only the image of the signature line). Or sometimes, if I finish the first attempt and try a new message or a new response, then it works...
But sometimes, nothing I will not convince the program that my OWN email that I want to send is NOT spam! The person I send to is EXPECTING and he waits! Why he won't send? Why he thinks I'm send spam?
I looked at my server settings, but I have no idea what it would be under.
How can I fix it? I NEVER send spam, I need this problem is solved so that it DOESN'T happen. Thanks for any help.
The mail server responded:
As indicated in the error message, it's from the server. Thunderbird has nothing to do with it. You will need to talk to your email provider why they mark your message as spam.
-
Original title: Message When I try to open Windows Movie Maker 2.6 said: the wmploc.d11 file has a version number of 11.0.6001.7010 where 11.0.6001.700 was expected. How can I fix this?
Message when I try to open Windows Movie Maker 2.6 said: the wmploc.d11 file has a version number of 11.0.6001.7010 where 11.0.6001.700 was expected. How can I fix this? HRemember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
· Are you having the same problem when you try to open Windows Media Player?
Method 1:
If you encounter the same error message with Windows Media player, you can run the hotfix in the following article data and check if this is useful.
http://support.Microsoft.com/kb/961047
Method 2:
If not then you can use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow the link below.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I lost my Ipad around two years and just found in my closet. Somehow I'm all my photos out of it so now I'm fine with the restore so that I can use it again. I try to restore and update every time it starts for about 5 minutes, but then stops and says something on the network does not. My laptop has had perfect wifi whenever it must be on the Ipad. I can't connect the Ipad WiFi because I tried to guess what my password could have been so many times it says to connect to itunes. How can I fix that I can restore?
I would like to start by making sure that you are running the latest version of iTunes. If you are not running iTunes 12.3, download it, and then try again.
-
I forgot my restriction code and I do not want to restore or re - sync my phone how can I fix it
I forgot my restriction code and I do not want to restore or re - sync my phone how can I fix it
If you do not restore, your only option is to continue to try restriction codes until you find the right one. There are only 10,000 to try.
-
I can't change my ip and dns address. I can't change, but on reboot it was greyed out and (obtain addresses automatically) how can I fix?
This happened after the execution of virus / malware scans and found some. The supposedly fixed it, but now I can't access the internet. It still works on my local network.
Hello
You did changes to the computer before the show?
Please follow the steps below.
Method 1:
Follow the steps from the link below.
Method 2:
Follow the steps from the link below
-
This application has failed to start because uncdms.dll was not found. Reinstalling the application may fix this problem. How can I fix it? Kathy
The above explains the problem, my problem is I don't know what it's etymology comes. Is this windows software, or software from Microsoft or both? What is the name of the Application? Help, please! Thank you, Kathy
Hi Kathy,
1 have you made changes to your computer recently?
2. When you get this error message?
The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.
I suggest you to follow the steps and check if it helps.
Method 1: Uninstall and reinstall Windows Desktop Search
The uncdms.dll file is installed on your PC when you download the Windows Desktop Search application. Problems with this application's files can cause a missing uncdms.dll of error appears on your system.
To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:
Step 1: Remove Windows Desktop Search from the boot sequence
To do this, follow the steps below:
a. click on the start menu, click Run.
(b) in the Open box, type msconfig and press ENTER.
c. in the System Configuration Utility dialog box, click the Startup tab.
d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.
e. restart your computer.
Step 2: Uninstall Windows Desktop Search applications
To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:
a. click the start menu and select Control Panel utility.
b. double-click the icon Add / Remove programs.
c. in the Add / Remove Programs, locate and select the Windows Desktop Search.
d. press the button Delete.
e. restart your computer.
Method 2: I suggest do you an online scan and check.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
I was trying to import a large number of files on 10 Organizer. Now, the organiser hangs at the launch. The Welcome screen appears for a second and then crashes. How can I fix it? I use desktop iMac with Yosemite.
mercad611 wrote:
I was trying to import a large number of files on 10 Organizer. Now, the organiser hangs at the launch. The Welcome screen appears for a second and then crashes. How can I fix it? I use desktop iMac with Yosemite.
If the problem is related to a corrupted catalog, try to open the organizer with a new empty catalog.
Hold down the SHIFT key at the launch of the Organizer. You get a dialog box with the choice to start with a new catalog, or start with a different catalog and even to 'fix' the current catalog. If your organizer starts with an empty catalog, use the option 'fix' on your corrupt catalog.
-
How can I fix my Camera Raw in Photoshop CS6? I tried to view a NEF file in CS6, but he said that I had to update my Camera Raw to 7.3 (I had 7.0). I went online and the only thing I could find was 8.6 download so that I started with it and installed something and it did not work and then he told me that I could not download 8.6 because my OS X isn't 10.7 (I 10.6.8). Now when I return to photoshop it gives me this error "cannot complete request because the file is not found" and I can not open JPEGs in photoshop. I tried to turn off my computer, hide, delete and uninstall photoshop and put it back. Still no luck. No idea how can I fix?
Follow these instructions to manually update your plug-in ACR to 8.3 of ACR, which was the last version compatible with your operating system:
http://helpx.Adobe.com/x-productkb/multi/camera-raw-84-support-policy.html
-
A ran a diagnostic test and this pop up. How can I fix it? Thank you
Hello
- What diagnostic test run you?
- What exactly is the problem that you are facing?
- What version of Windows are you using?
Response with more information.
-
One of the options from the menu in CS6 recently stopped working. This is the file-> file information... I see no more image information. How can I fix this?
Thank you
Frnak
See this thread: Info file gives me just a blank dialog box
The fix goes like this:
Create a new text file called XMP.cfg (make sure that the extension is cfg and not txt).
The only text that should be in this file is as below:
C:\
Copy the file C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerTrust (create the directory if not already there).
Restart the Adobe application and review the file information panel.
-
Original title: access to a specific registry key generates BSOD. How can I fix the key?
Scans the registry in XP causes a BSOD. The wrong key is HKEY_USERS\S-1-5-18\software\Microsoft. Access to manually also causes a BSOD so I can't delete or export it. I do not have a restore point from before the problem started. Other than the access to that key or run a search, XP works well.
Is it possible to fix this?Not having no not this error in my notes (in other words, I've not seen at least 2 times), I Googled it and first fell on a MS KB article:
http://support.Microsoft.com/kb/810558
This article includes this statement:
Contact Microsoft Technical Support to help heal the corruption in the registry.
I think that is where you are right now, so let's see what is the response of the Microsoft Support Engineer, now that there is more information. I always love to see what they have to offer first.
Why and how did you change the system restore to create restore Points 3 a day for 30 days (FYI - that is not the same as a backup).
If you were to solve some problem at the time, what was the question?
The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.)
In the meantime, I would run a chkdsk /r on your volume XP since XP Recovery Console.
If you are not sure of the SP2 CD you have is an XP bootable installation CD authentic and not some kind of restore CD for the Dell system to 100%, I would recommend this (that I've seen more than 2 times):
If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).
This is not the same as recovery disks that might have come with the acquisition of the system store.
You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.
The ISO bootable image file you need to download is called:
xp_rec_con. ISO
Download the ISO from here:
http://www.mediafire.com/?ueyyzfymmig
Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):
Here are some instructions for ImgBurn:
http://Forum.ImgBurn.com/index.php?showtopic=61
It would be a good idea to test your bootable CD on a computer running.
You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.
When you start on the CD, follow the instructions:
Press any key to boot from CD...
Installing Windows... going to pronounce.
Press 'R' to enter the Recovery Console.
Select the installation that you want to access (usually 1: C:\WINDOWS)
You may be asked to enter the password (usually empty).
You should be in the folder C:\WINDOWS. It's the same as the
C:\Windows folder that you see in Solution Explorer.
The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.
For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:
A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.
In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.
Running chkdsk is fine, even if he finds no problem. It won't hurt anything to run it.
Assuming your boot drive is C, run the following command:
CHKDSK C: /r
Let chkdsk finish to correct the problems, he could find.
It may take a long time for chkdsk complete or they seem to be "stuck". Be patient. If the HARD drive led blinks always, chkdsk is something. Keep an eye on the amount of the percentage to be sure that it is still making progress. It may even seem to go back sometime.
You must run chkdsk/r again until it finds no error to correct.
Remove the CD, and then type "exit" to exit the RC and restart the computer.
You have not to set the BIOS to boot the disk HARD since the CD won't be.
Maybe you are looking for
-
Deleted Applications folder! How can I go back?
OK done a big mistake - delete sort the applications folder on the HD (not only of the docking station). Any ideas how I can get the OS applications without having to do a reinstall full? Thanks in advance!
-
Satellite M30-241 IR - laptop computer issues does not recognize mobile phone
Hi experts,hope you can help me. I would like to transfer photos from my phone to my mobile phone via infrared, but for some reason, both devices recognize each other (I have activated the function on my laptop and I think that I put in place the IR
-
My MSN e-mail account was hacked few weeks ago and I have changed my password.
My email account was hijacked several weeks ago and I have changed my password. Today, I found this address * address email is removed from the privacy *, on my password reset screen. I can't remove this address and any change in my password will b
-
How to make a windows own 10, upgrade disc lost
I have a aspire 8920g which has been pre-installed with windows Vista. I received a free upgrade disk windows 7 now I lost several years ago. I've recently upgraded to w10 and my product has a "right of digital. Since I now feel that all these improv
-
set up my hp 4620 wireless printing from my Galaxy 10 tablets
Could someone please provide the location for instructions? I want to print from my GALAXY 10 TABLET, my phone GALAXY NOTE 3, my GALAXY s3 T999L mobile phone and my DELL laptop. Thanks in advance mikienew61